| /* | |
| * Definitions for ADB (Apple Desktop Bus) support. | |
| */ | |
| #ifndef __ADB_H | |
| #define __ADB_H | |
| /* ADB commands */ | |
| #define ADB_BUSRESET 0 | |
| #define ADB_FLUSH(id) (0x01 | ((id) << 4)) | |
| #define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4)) | |
| #define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4)) | |
| /* ADB default device IDs (upper 4 bits of ADB command byte) */ | |
| #define ADB_DONGLE 1 /* "software execution control" devices */ | |
| #define ADB_KEYBOARD 2 | |
| #define ADB_MOUSE 3 | |
| #define ADB_TABLET 4 | |
| #define ADB_MODEM 5 | |
| #define ADB_MISC 7 /* maybe a monitor */ | |
| #define ADB_RET_OK 0 | |
| #define ADB_RET_TIMEOUT 3 | |
| /* The kind of ADB request. The controller may emulate some | |
| or all of those CUDA/PMU packet kinds */ | |
| #define ADB_PACKET 0 | |
| #define CUDA_PACKET 1 | |
| #define ERROR_PACKET 2 | |
| #define TIMER_PACKET 3 | |
| #define POWER_PACKET 4 | |
| #define MACIIC_PACKET 5 | |
| #define PMU_PACKET 6 | |
| #define ADB_QUERY 7 | |
| /* ADB queries */ | |
| /* ADB_QUERY_GETDEVINFO | |
| * Query ADB slot for device presence | |
| * data[2] = id, rep[0] = orig addr, rep[1] = handler_id | |
| */ | |
| #define ADB_QUERY_GETDEVINFO 1 | |
| #ifdef __KERNEL__ | |
| struct adb_request { | |
| unsigned char data[32]; | |
| int nbytes; | |
| unsigned char reply[32]; | |
| int reply_len; | |
| unsigned char reply_expected; | |
| unsigned char sent; | |
| unsigned char complete; | |
| void (*done)(struct adb_request *); | |
| void *arg; | |
| struct adb_request *next; | |
| }; | |
| struct adb_ids { | |
| int nids; | |
| unsigned char id[16]; | |
| }; | |
| /* Structure which encapsulates a low-level ADB driver */ | |
| struct adb_driver { | |
| char name[16]; | |
| int (*probe)(void); | |
| int (*init)(void); | |
| int (*send_request)(struct adb_request *req, int sync); | |
| int (*autopoll)(int devs); | |
| void (*poll)(void); | |
| int (*reset_bus)(void); | |
| }; | |
| /* Values for adb_request flags */ | |
| #define ADBREQ_REPLY 1 /* expect reply */ | |
| #define ADBREQ_SYNC 2 /* poll until done */ | |
| #define ADBREQ_NOSEND 4 /* build the request, but don't send it */ | |
| /* Messages sent thru the client_list notifier. You should NOT stop | |
| the operation, at least not with this version */ | |
| enum adb_message { | |
| ADB_MSG_POWERDOWN, /* Currently called before sleep only */ | |
| ADB_MSG_PRE_RESET, /* Called before resetting the bus */ | |
| ADB_MSG_POST_RESET /* Called after resetting the bus (re-do init & register) */ | |
| }; | |
| extern struct blocking_notifier_head adb_client_list; | |
| int adb_request(struct adb_request *req, void (*done)(struct adb_request *), | |
| int flags, int nbytes, ...); | |
| int adb_register(int default_id,int handler_id,struct adb_ids *ids, | |
| void (*handler)(unsigned char *, int, int)); | |
| int adb_unregister(int index); | |
| void adb_poll(void); | |
| void adb_input(unsigned char *, int, int); | |
| int adb_reset_bus(void); | |
| int adb_try_handler_change(int address, int new_id); | |
| int adb_get_infos(int address, int *original_address, int *handler_id); | |
| #endif /* __KERNEL__ */ | |
| #endif /* __ADB_H */ |