|  | /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- | 
|  | */ | 
|  | /* | 
|  | * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. | 
|  | * All Rights Reserved. | 
|  | * | 
|  | * Permission is hereby granted, free of charge, to any person obtaining a | 
|  | * copy of this software and associated documentation files (the | 
|  | * "Software"), to deal in the Software without restriction, including | 
|  | * without limitation the rights to use, copy, modify, merge, publish, | 
|  | * distribute, sub license, and/or sell copies of the Software, and to | 
|  | * permit persons to whom the Software is furnished to do so, subject to | 
|  | * the following conditions: | 
|  | * | 
|  | * The above copyright notice and this permission notice (including the | 
|  | * next paragraph) shall be included in all copies or substantial portions | 
|  | * of the Software. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS | 
|  | * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
|  | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. | 
|  | * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR | 
|  | * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, | 
|  | * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE | 
|  | * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/sysrq.h> | 
|  | #include <linux/slab.h> | 
|  | #include "drmP.h" | 
|  | #include "drm.h" | 
|  | #include "i915_drm.h" | 
|  | #include "i915_drv.h" | 
|  | #include "i915_trace.h" | 
|  | #include "intel_drv.h" | 
|  |  | 
|  | #define MAX_NOPID ((u32)~0) | 
|  |  | 
|  | /** | 
|  | * Interrupts that are always left unmasked. | 
|  | * | 
|  | * Since pipe events are edge-triggered from the PIPESTAT register to IIR, | 
|  | * we leave them always unmasked in IMR and then control enabling them through | 
|  | * PIPESTAT alone. | 
|  | */ | 
|  | #define I915_INTERRUPT_ENABLE_FIX			\ | 
|  | (I915_ASLE_INTERRUPT |				\ | 
|  | I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |		\ | 
|  | I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |		\ | 
|  | I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |	\ | 
|  | I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |	\ | 
|  | I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) | 
|  |  | 
|  | /** Interrupts that we mask and unmask at runtime. */ | 
|  | #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT | I915_BSD_USER_INTERRUPT) | 
|  |  | 
|  | #define I915_PIPE_VBLANK_STATUS	(PIPE_START_VBLANK_INTERRUPT_STATUS |\ | 
|  | PIPE_VBLANK_INTERRUPT_STATUS) | 
|  |  | 
|  | #define I915_PIPE_VBLANK_ENABLE	(PIPE_START_VBLANK_INTERRUPT_ENABLE |\ | 
|  | PIPE_VBLANK_INTERRUPT_ENABLE) | 
|  |  | 
|  | #define DRM_I915_VBLANK_PIPE_ALL	(DRM_I915_VBLANK_PIPE_A | \ | 
|  | DRM_I915_VBLANK_PIPE_B) | 
|  |  | 
|  | /* For display hotplug interrupt */ | 
|  | static void | 
|  | ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask) | 
|  | { | 
|  | if ((dev_priv->irq_mask & mask) != 0) { | 
|  | dev_priv->irq_mask &= ~mask; | 
|  | I915_WRITE(DEIMR, dev_priv->irq_mask); | 
|  | POSTING_READ(DEIMR); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask) | 
|  | { | 
|  | if ((dev_priv->irq_mask & mask) != mask) { | 
|  | dev_priv->irq_mask |= mask; | 
|  | I915_WRITE(DEIMR, dev_priv->irq_mask); | 
|  | POSTING_READ(DEIMR); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) | 
|  | { | 
|  | if ((dev_priv->pipestat[pipe] & mask) != mask) { | 
|  | u32 reg = PIPESTAT(pipe); | 
|  |  | 
|  | dev_priv->pipestat[pipe] |= mask; | 
|  | /* Enable the interrupt, clear any pending status */ | 
|  | I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16)); | 
|  | POSTING_READ(reg); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) | 
|  | { | 
|  | if ((dev_priv->pipestat[pipe] & mask) != 0) { | 
|  | u32 reg = PIPESTAT(pipe); | 
|  |  | 
|  | dev_priv->pipestat[pipe] &= ~mask; | 
|  | I915_WRITE(reg, dev_priv->pipestat[pipe]); | 
|  | POSTING_READ(reg); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * intel_enable_asle - enable ASLE interrupt for OpRegion | 
|  | */ | 
|  | void intel_enable_asle(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  |  | 
|  | if (HAS_PCH_SPLIT(dev)) | 
|  | ironlake_enable_display_irq(dev_priv, DE_GSE); | 
|  | else { | 
|  | i915_enable_pipestat(dev_priv, 1, | 
|  | PIPE_LEGACY_BLC_EVENT_ENABLE); | 
|  | if (INTEL_INFO(dev)->gen >= 4) | 
|  | i915_enable_pipestat(dev_priv, 0, | 
|  | PIPE_LEGACY_BLC_EVENT_ENABLE); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * i915_pipe_enabled - check if a pipe is enabled | 
|  | * @dev: DRM device | 
|  | * @pipe: pipe to check | 
|  | * | 
|  | * Reading certain registers when the pipe is disabled can hang the chip. | 
|  | * Use this routine to make sure the PLL is running and the pipe is active | 
|  | * before reading such registers if unsure. | 
|  | */ | 
|  | static int | 
|  | i915_pipe_enabled(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE; | 
|  | } | 
|  |  | 
|  | /* Called from drm generic code, passed a 'crtc', which | 
|  | * we use as a pipe index | 
|  | */ | 
|  | static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long high_frame; | 
|  | unsigned long low_frame; | 
|  | u32 high1, high2, low; | 
|  |  | 
|  | if (!i915_pipe_enabled(dev, pipe)) { | 
|  | DRM_DEBUG_DRIVER("trying to get vblank count for disabled " | 
|  | "pipe %c\n", pipe_name(pipe)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | high_frame = PIPEFRAME(pipe); | 
|  | low_frame = PIPEFRAMEPIXEL(pipe); | 
|  |  | 
|  | /* | 
|  | * High & low register fields aren't synchronized, so make sure | 
|  | * we get a low value that's stable across two reads of the high | 
|  | * register. | 
|  | */ | 
|  | do { | 
|  | high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; | 
|  | low   = I915_READ(low_frame)  & PIPE_FRAME_LOW_MASK; | 
|  | high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; | 
|  | } while (high1 != high2); | 
|  |  | 
|  | high1 >>= PIPE_FRAME_HIGH_SHIFT; | 
|  | low >>= PIPE_FRAME_LOW_SHIFT; | 
|  | return (high1 << 8) | low; | 
|  | } | 
|  |  | 
|  | static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | int reg = PIPE_FRMCOUNT_GM45(pipe); | 
|  |  | 
|  | if (!i915_pipe_enabled(dev, pipe)) { | 
|  | DRM_DEBUG_DRIVER("trying to get vblank count for disabled " | 
|  | "pipe %c\n", pipe_name(pipe)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return I915_READ(reg); | 
|  | } | 
|  |  | 
|  | static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, | 
|  | int *vpos, int *hpos) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | u32 vbl = 0, position = 0; | 
|  | int vbl_start, vbl_end, htotal, vtotal; | 
|  | bool in_vbl = true; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!i915_pipe_enabled(dev, pipe)) { | 
|  | DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled " | 
|  | "pipe %c\n", pipe_name(pipe)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Get vtotal. */ | 
|  | vtotal = 1 + ((I915_READ(VTOTAL(pipe)) >> 16) & 0x1fff); | 
|  |  | 
|  | if (INTEL_INFO(dev)->gen >= 4) { | 
|  | /* No obvious pixelcount register. Only query vertical | 
|  | * scanout position from Display scan line register. | 
|  | */ | 
|  | position = I915_READ(PIPEDSL(pipe)); | 
|  |  | 
|  | /* Decode into vertical scanout position. Don't have | 
|  | * horizontal scanout position. | 
|  | */ | 
|  | *vpos = position & 0x1fff; | 
|  | *hpos = 0; | 
|  | } else { | 
|  | /* Have access to pixelcount since start of frame. | 
|  | * We can split this into vertical and horizontal | 
|  | * scanout position. | 
|  | */ | 
|  | position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT; | 
|  |  | 
|  | htotal = 1 + ((I915_READ(HTOTAL(pipe)) >> 16) & 0x1fff); | 
|  | *vpos = position / htotal; | 
|  | *hpos = position - (*vpos * htotal); | 
|  | } | 
|  |  | 
|  | /* Query vblank area. */ | 
|  | vbl = I915_READ(VBLANK(pipe)); | 
|  |  | 
|  | /* Test position against vblank region. */ | 
|  | vbl_start = vbl & 0x1fff; | 
|  | vbl_end = (vbl >> 16) & 0x1fff; | 
|  |  | 
|  | if ((*vpos < vbl_start) || (*vpos > vbl_end)) | 
|  | in_vbl = false; | 
|  |  | 
|  | /* Inside "upper part" of vblank area? Apply corrective offset: */ | 
|  | if (in_vbl && (*vpos >= vbl_start)) | 
|  | *vpos = *vpos - vtotal; | 
|  |  | 
|  | /* Readouts valid? */ | 
|  | if (vbl > 0) | 
|  | ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE; | 
|  |  | 
|  | /* In vblank? */ | 
|  | if (in_vbl) | 
|  | ret |= DRM_SCANOUTPOS_INVBL; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, | 
|  | int *max_error, | 
|  | struct timeval *vblank_time, | 
|  | unsigned flags) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | struct drm_crtc *crtc; | 
|  |  | 
|  | if (pipe < 0 || pipe >= dev_priv->num_pipe) { | 
|  | DRM_ERROR("Invalid crtc %d\n", pipe); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Get drm_crtc to timestamp: */ | 
|  | crtc = intel_get_crtc_for_pipe(dev, pipe); | 
|  | if (crtc == NULL) { | 
|  | DRM_ERROR("Invalid crtc %d\n", pipe); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!crtc->enabled) { | 
|  | DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* Helper routine in DRM core does all the work: */ | 
|  | return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error, | 
|  | vblank_time, flags, | 
|  | crtc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle hotplug events outside the interrupt handler proper. | 
|  | */ | 
|  | static void i915_hotplug_work_func(struct work_struct *work) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, | 
|  | hotplug_work); | 
|  | struct drm_device *dev = dev_priv->dev; | 
|  | struct drm_mode_config *mode_config = &dev->mode_config; | 
|  | struct intel_encoder *encoder; | 
|  |  | 
|  | mutex_lock(&mode_config->mutex); | 
|  | DRM_DEBUG_KMS("running encoder hotplug functions\n"); | 
|  |  | 
|  | list_for_each_entry(encoder, &mode_config->encoder_list, base.head) | 
|  | if (encoder->hot_plug) | 
|  | encoder->hot_plug(encoder); | 
|  |  | 
|  | mutex_unlock(&mode_config->mutex); | 
|  |  | 
|  | /* Just fire off a uevent and let userspace tell us what to do */ | 
|  | drm_helper_hpd_irq_event(dev); | 
|  | } | 
|  |  | 
|  | static void i915_handle_rps_change(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | u32 busy_up, busy_down, max_avg, min_avg; | 
|  | u8 new_delay = dev_priv->cur_delay; | 
|  |  | 
|  | I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG); | 
|  | busy_up = I915_READ(RCPREVBSYTUPAVG); | 
|  | busy_down = I915_READ(RCPREVBSYTDNAVG); | 
|  | max_avg = I915_READ(RCBMAXAVG); | 
|  | min_avg = I915_READ(RCBMINAVG); | 
|  |  | 
|  | /* Handle RCS change request from hw */ | 
|  | if (busy_up > max_avg) { | 
|  | if (dev_priv->cur_delay != dev_priv->max_delay) | 
|  | new_delay = dev_priv->cur_delay - 1; | 
|  | if (new_delay < dev_priv->max_delay) | 
|  | new_delay = dev_priv->max_delay; | 
|  | } else if (busy_down < min_avg) { | 
|  | if (dev_priv->cur_delay != dev_priv->min_delay) | 
|  | new_delay = dev_priv->cur_delay + 1; | 
|  | if (new_delay > dev_priv->min_delay) | 
|  | new_delay = dev_priv->min_delay; | 
|  | } | 
|  |  | 
|  | if (ironlake_set_drps(dev, new_delay)) | 
|  | dev_priv->cur_delay = new_delay; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void notify_ring(struct drm_device *dev, | 
|  | struct intel_ring_buffer *ring) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | u32 seqno; | 
|  |  | 
|  | if (ring->obj == NULL) | 
|  | return; | 
|  |  | 
|  | seqno = ring->get_seqno(ring); | 
|  | trace_i915_gem_request_complete(ring, seqno); | 
|  |  | 
|  | ring->irq_seqno = seqno; | 
|  | wake_up_all(&ring->irq_queue); | 
|  | if (i915_enable_hangcheck) { | 
|  | dev_priv->hangcheck_count = 0; | 
|  | mod_timer(&dev_priv->hangcheck_timer, | 
|  | jiffies + | 
|  | msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void gen6_pm_rps_work(struct work_struct *work) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, | 
|  | rps_work); | 
|  | u8 new_delay = dev_priv->cur_delay; | 
|  | u32 pm_iir, pm_imr; | 
|  |  | 
|  | spin_lock_irq(&dev_priv->rps_lock); | 
|  | pm_iir = dev_priv->pm_iir; | 
|  | dev_priv->pm_iir = 0; | 
|  | pm_imr = I915_READ(GEN6_PMIMR); | 
|  | I915_WRITE(GEN6_PMIMR, 0); | 
|  | spin_unlock_irq(&dev_priv->rps_lock); | 
|  |  | 
|  | if (!pm_iir) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&dev_priv->dev->struct_mutex); | 
|  | if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) { | 
|  | if (dev_priv->cur_delay != dev_priv->max_delay) | 
|  | new_delay = dev_priv->cur_delay + 1; | 
|  | if (new_delay > dev_priv->max_delay) | 
|  | new_delay = dev_priv->max_delay; | 
|  | } else if (pm_iir & (GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT)) { | 
|  | gen6_gt_force_wake_get(dev_priv); | 
|  | if (dev_priv->cur_delay != dev_priv->min_delay) | 
|  | new_delay = dev_priv->cur_delay - 1; | 
|  | if (new_delay < dev_priv->min_delay) { | 
|  | new_delay = dev_priv->min_delay; | 
|  | I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, | 
|  | I915_READ(GEN6_RP_INTERRUPT_LIMITS) | | 
|  | ((new_delay << 16) & 0x3f0000)); | 
|  | } else { | 
|  | /* Make sure we continue to get down interrupts | 
|  | * until we hit the minimum frequency */ | 
|  | I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, | 
|  | I915_READ(GEN6_RP_INTERRUPT_LIMITS) & ~0x3f0000); | 
|  | } | 
|  | gen6_gt_force_wake_put(dev_priv); | 
|  | } | 
|  |  | 
|  | gen6_set_rps(dev_priv->dev, new_delay); | 
|  | dev_priv->cur_delay = new_delay; | 
|  |  | 
|  | /* | 
|  | * rps_lock not held here because clearing is non-destructive. There is | 
|  | * an *extremely* unlikely race with gen6_rps_enable() that is prevented | 
|  | * by holding struct_mutex for the duration of the write. | 
|  | */ | 
|  | mutex_unlock(&dev_priv->dev->struct_mutex); | 
|  | } | 
|  |  | 
|  | static void pch_irq_handler(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | u32 pch_iir; | 
|  | int pipe; | 
|  |  | 
|  | pch_iir = I915_READ(SDEIIR); | 
|  |  | 
|  | if (pch_iir & SDE_AUDIO_POWER_MASK) | 
|  | DRM_DEBUG_DRIVER("PCH audio power change on port %d\n", | 
|  | (pch_iir & SDE_AUDIO_POWER_MASK) >> | 
|  | SDE_AUDIO_POWER_SHIFT); | 
|  |  | 
|  | if (pch_iir & SDE_GMBUS) | 
|  | DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n"); | 
|  |  | 
|  | if (pch_iir & SDE_AUDIO_HDCP_MASK) | 
|  | DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n"); | 
|  |  | 
|  | if (pch_iir & SDE_AUDIO_TRANS_MASK) | 
|  | DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n"); | 
|  |  | 
|  | if (pch_iir & SDE_POISON) | 
|  | DRM_ERROR("PCH poison interrupt\n"); | 
|  |  | 
|  | if (pch_iir & SDE_FDI_MASK) | 
|  | for_each_pipe(pipe) | 
|  | DRM_DEBUG_DRIVER("  pipe %c FDI IIR: 0x%08x\n", | 
|  | pipe_name(pipe), | 
|  | I915_READ(FDI_RX_IIR(pipe))); | 
|  |  | 
|  | if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE)) | 
|  | DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n"); | 
|  |  | 
|  | if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR)) | 
|  | DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n"); | 
|  |  | 
|  | if (pch_iir & SDE_TRANSB_FIFO_UNDER) | 
|  | DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n"); | 
|  | if (pch_iir & SDE_TRANSA_FIFO_UNDER) | 
|  | DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n"); | 
|  | } | 
|  |  | 
|  | static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) | 
|  | { | 
|  | struct drm_device *dev = (struct drm_device *) arg; | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | int ret = IRQ_NONE; | 
|  | u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir; | 
|  | struct drm_i915_master_private *master_priv; | 
|  |  | 
|  | atomic_inc(&dev_priv->irq_received); | 
|  |  | 
|  | /* disable master interrupt before clearing iir  */ | 
|  | de_ier = I915_READ(DEIER); | 
|  | I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | de_iir = I915_READ(DEIIR); | 
|  | gt_iir = I915_READ(GTIIR); | 
|  | pch_iir = I915_READ(SDEIIR); | 
|  | pm_iir = I915_READ(GEN6_PMIIR); | 
|  |  | 
|  | if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 && pm_iir == 0) | 
|  | goto done; | 
|  |  | 
|  | ret = IRQ_HANDLED; | 
|  |  | 
|  | if (dev->primary->master) { | 
|  | master_priv = dev->primary->master->driver_priv; | 
|  | if (master_priv->sarea_priv) | 
|  | master_priv->sarea_priv->last_dispatch = | 
|  | READ_BREADCRUMB(dev_priv); | 
|  | } | 
|  |  | 
|  | if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY)) | 
|  | notify_ring(dev, &dev_priv->ring[RCS]); | 
|  | if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT) | 
|  | notify_ring(dev, &dev_priv->ring[VCS]); | 
|  | if (gt_iir & GT_BLT_USER_INTERRUPT) | 
|  | notify_ring(dev, &dev_priv->ring[BCS]); | 
|  |  | 
|  | if (de_iir & DE_GSE_IVB) | 
|  | intel_opregion_gse_intr(dev); | 
|  |  | 
|  | if (de_iir & DE_PLANEA_FLIP_DONE_IVB) { | 
|  | intel_prepare_page_flip(dev, 0); | 
|  | intel_finish_page_flip_plane(dev, 0); | 
|  | } | 
|  |  | 
|  | if (de_iir & DE_PLANEB_FLIP_DONE_IVB) { | 
|  | intel_prepare_page_flip(dev, 1); | 
|  | intel_finish_page_flip_plane(dev, 1); | 
|  | } | 
|  |  | 
|  | if (de_iir & DE_PIPEA_VBLANK_IVB) | 
|  | drm_handle_vblank(dev, 0); | 
|  |  | 
|  | if (de_iir & DE_PIPEB_VBLANK_IVB) | 
|  | drm_handle_vblank(dev, 1); | 
|  |  | 
|  | /* check event from PCH */ | 
|  | if (de_iir & DE_PCH_EVENT_IVB) { | 
|  | if (pch_iir & SDE_HOTPLUG_MASK_CPT) | 
|  | queue_work(dev_priv->wq, &dev_priv->hotplug_work); | 
|  | pch_irq_handler(dev); | 
|  | } | 
|  |  | 
|  | if (pm_iir & GEN6_PM_DEFERRED_EVENTS) { | 
|  | unsigned long flags; | 
|  | spin_lock_irqsave(&dev_priv->rps_lock, flags); | 
|  | WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n"); | 
|  | dev_priv->pm_iir |= pm_iir; | 
|  | I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir); | 
|  | POSTING_READ(GEN6_PMIMR); | 
|  | spin_unlock_irqrestore(&dev_priv->rps_lock, flags); | 
|  | queue_work(dev_priv->wq, &dev_priv->rps_work); | 
|  | } | 
|  |  | 
|  | /* should clear PCH hotplug event before clear CPU irq */ | 
|  | I915_WRITE(SDEIIR, pch_iir); | 
|  | I915_WRITE(GTIIR, gt_iir); | 
|  | I915_WRITE(DEIIR, de_iir); | 
|  | I915_WRITE(GEN6_PMIIR, pm_iir); | 
|  |  | 
|  | done: | 
|  | I915_WRITE(DEIER, de_ier); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) | 
|  | { | 
|  | struct drm_device *dev = (struct drm_device *) arg; | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | int ret = IRQ_NONE; | 
|  | u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir; | 
|  | u32 hotplug_mask; | 
|  | struct drm_i915_master_private *master_priv; | 
|  | u32 bsd_usr_interrupt = GT_BSD_USER_INTERRUPT; | 
|  |  | 
|  | atomic_inc(&dev_priv->irq_received); | 
|  |  | 
|  | if (IS_GEN6(dev)) | 
|  | bsd_usr_interrupt = GT_GEN6_BSD_USER_INTERRUPT; | 
|  |  | 
|  | /* disable master interrupt before clearing iir  */ | 
|  | de_ier = I915_READ(DEIER); | 
|  | I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | de_iir = I915_READ(DEIIR); | 
|  | gt_iir = I915_READ(GTIIR); | 
|  | pch_iir = I915_READ(SDEIIR); | 
|  | pm_iir = I915_READ(GEN6_PMIIR); | 
|  |  | 
|  | if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 && | 
|  | (!IS_GEN6(dev) || pm_iir == 0)) | 
|  | goto done; | 
|  |  | 
|  | if (HAS_PCH_CPT(dev)) | 
|  | hotplug_mask = SDE_HOTPLUG_MASK_CPT; | 
|  | else | 
|  | hotplug_mask = SDE_HOTPLUG_MASK; | 
|  |  | 
|  | ret = IRQ_HANDLED; | 
|  |  | 
|  | if (dev->primary->master) { | 
|  | master_priv = dev->primary->master->driver_priv; | 
|  | if (master_priv->sarea_priv) | 
|  | master_priv->sarea_priv->last_dispatch = | 
|  | READ_BREADCRUMB(dev_priv); | 
|  | } | 
|  |  | 
|  | if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY)) | 
|  | notify_ring(dev, &dev_priv->ring[RCS]); | 
|  | if (gt_iir & bsd_usr_interrupt) | 
|  | notify_ring(dev, &dev_priv->ring[VCS]); | 
|  | if (gt_iir & GT_BLT_USER_INTERRUPT) | 
|  | notify_ring(dev, &dev_priv->ring[BCS]); | 
|  |  | 
|  | if (de_iir & DE_GSE) | 
|  | intel_opregion_gse_intr(dev); | 
|  |  | 
|  | if (de_iir & DE_PLANEA_FLIP_DONE) { | 
|  | intel_prepare_page_flip(dev, 0); | 
|  | intel_finish_page_flip_plane(dev, 0); | 
|  | } | 
|  |  | 
|  | if (de_iir & DE_PLANEB_FLIP_DONE) { | 
|  | intel_prepare_page_flip(dev, 1); | 
|  | intel_finish_page_flip_plane(dev, 1); | 
|  | } | 
|  |  | 
|  | if (de_iir & DE_PIPEA_VBLANK) | 
|  | drm_handle_vblank(dev, 0); | 
|  |  | 
|  | if (de_iir & DE_PIPEB_VBLANK) | 
|  | drm_handle_vblank(dev, 1); | 
|  |  | 
|  | /* check event from PCH */ | 
|  | if (de_iir & DE_PCH_EVENT) { | 
|  | if (pch_iir & hotplug_mask) | 
|  | queue_work(dev_priv->wq, &dev_priv->hotplug_work); | 
|  | pch_irq_handler(dev); | 
|  | } | 
|  |  | 
|  | if (de_iir & DE_PCU_EVENT) { | 
|  | I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS)); | 
|  | i915_handle_rps_change(dev); | 
|  | } | 
|  |  | 
|  | if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS) { | 
|  | /* | 
|  | * IIR bits should never already be set because IMR should | 
|  | * prevent an interrupt from being shown in IIR. The warning | 
|  | * displays a case where we've unsafely cleared | 
|  | * dev_priv->pm_iir. Although missing an interrupt of the same | 
|  | * type is not a problem, it displays a problem in the logic. | 
|  | * | 
|  | * The mask bit in IMR is cleared by rps_work. | 
|  | */ | 
|  | unsigned long flags; | 
|  | spin_lock_irqsave(&dev_priv->rps_lock, flags); | 
|  | WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n"); | 
|  | dev_priv->pm_iir |= pm_iir; | 
|  | I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir); | 
|  | POSTING_READ(GEN6_PMIMR); | 
|  | spin_unlock_irqrestore(&dev_priv->rps_lock, flags); | 
|  | queue_work(dev_priv->wq, &dev_priv->rps_work); | 
|  | } | 
|  |  | 
|  | /* should clear PCH hotplug event before clear CPU irq */ | 
|  | I915_WRITE(SDEIIR, pch_iir); | 
|  | I915_WRITE(GTIIR, gt_iir); | 
|  | I915_WRITE(DEIIR, de_iir); | 
|  | I915_WRITE(GEN6_PMIIR, pm_iir); | 
|  |  | 
|  | done: | 
|  | I915_WRITE(DEIER, de_ier); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * i915_error_work_func - do process context error handling work | 
|  | * @work: work struct | 
|  | * | 
|  | * Fire an error uevent so userspace can see that a hang or error | 
|  | * was detected. | 
|  | */ | 
|  | static void i915_error_work_func(struct work_struct *work) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, | 
|  | error_work); | 
|  | struct drm_device *dev = dev_priv->dev; | 
|  | char *error_event[] = { "ERROR=1", NULL }; | 
|  | char *reset_event[] = { "RESET=1", NULL }; | 
|  | char *reset_done_event[] = { "ERROR=0", NULL }; | 
|  |  | 
|  | kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event); | 
|  |  | 
|  | if (atomic_read(&dev_priv->mm.wedged)) { | 
|  | DRM_DEBUG_DRIVER("resetting chip\n"); | 
|  | kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event); | 
|  | if (!i915_reset(dev, GRDOM_RENDER)) { | 
|  | atomic_set(&dev_priv->mm.wedged, 0); | 
|  | kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event); | 
|  | } | 
|  | complete_all(&dev_priv->error_completion); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | static struct drm_i915_error_object * | 
|  | i915_error_object_create(struct drm_i915_private *dev_priv, | 
|  | struct drm_i915_gem_object *src) | 
|  | { | 
|  | struct drm_i915_error_object *dst; | 
|  | int page, page_count; | 
|  | u32 reloc_offset; | 
|  |  | 
|  | if (src == NULL || src->pages == NULL) | 
|  | return NULL; | 
|  |  | 
|  | page_count = src->base.size / PAGE_SIZE; | 
|  |  | 
|  | dst = kmalloc(sizeof(*dst) + page_count * sizeof(u32 *), GFP_ATOMIC); | 
|  | if (dst == NULL) | 
|  | return NULL; | 
|  |  | 
|  | reloc_offset = src->gtt_offset; | 
|  | for (page = 0; page < page_count; page++) { | 
|  | unsigned long flags; | 
|  | void __iomem *s; | 
|  | void *d; | 
|  |  | 
|  | d = kmalloc(PAGE_SIZE, GFP_ATOMIC); | 
|  | if (d == NULL) | 
|  | goto unwind; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | s = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, | 
|  | reloc_offset); | 
|  | memcpy_fromio(d, s, PAGE_SIZE); | 
|  | io_mapping_unmap_atomic(s); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | dst->pages[page] = d; | 
|  |  | 
|  | reloc_offset += PAGE_SIZE; | 
|  | } | 
|  | dst->page_count = page_count; | 
|  | dst->gtt_offset = src->gtt_offset; | 
|  |  | 
|  | return dst; | 
|  |  | 
|  | unwind: | 
|  | while (page--) | 
|  | kfree(dst->pages[page]); | 
|  | kfree(dst); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void | 
|  | i915_error_object_free(struct drm_i915_error_object *obj) | 
|  | { | 
|  | int page; | 
|  |  | 
|  | if (obj == NULL) | 
|  | return; | 
|  |  | 
|  | for (page = 0; page < obj->page_count; page++) | 
|  | kfree(obj->pages[page]); | 
|  |  | 
|  | kfree(obj); | 
|  | } | 
|  |  | 
|  | static void | 
|  | i915_error_state_free(struct drm_device *dev, | 
|  | struct drm_i915_error_state *error) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(error->batchbuffer); i++) | 
|  | i915_error_object_free(error->batchbuffer[i]); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(error->ringbuffer); i++) | 
|  | i915_error_object_free(error->ringbuffer[i]); | 
|  |  | 
|  | kfree(error->active_bo); | 
|  | kfree(error->overlay); | 
|  | kfree(error); | 
|  | } | 
|  |  | 
|  | static u32 capture_bo_list(struct drm_i915_error_buffer *err, | 
|  | int count, | 
|  | struct list_head *head) | 
|  | { | 
|  | struct drm_i915_gem_object *obj; | 
|  | int i = 0; | 
|  |  | 
|  | list_for_each_entry(obj, head, mm_list) { | 
|  | err->size = obj->base.size; | 
|  | err->name = obj->base.name; | 
|  | err->seqno = obj->last_rendering_seqno; | 
|  | err->gtt_offset = obj->gtt_offset; | 
|  | err->read_domains = obj->base.read_domains; | 
|  | err->write_domain = obj->base.write_domain; | 
|  | err->fence_reg = obj->fence_reg; | 
|  | err->pinned = 0; | 
|  | if (obj->pin_count > 0) | 
|  | err->pinned = 1; | 
|  | if (obj->user_pin_count > 0) | 
|  | err->pinned = -1; | 
|  | err->tiling = obj->tiling_mode; | 
|  | err->dirty = obj->dirty; | 
|  | err->purgeable = obj->madv != I915_MADV_WILLNEED; | 
|  | err->ring = obj->ring ? obj->ring->id : 0; | 
|  | err->cache_level = obj->cache_level; | 
|  |  | 
|  | if (++i == count) | 
|  | break; | 
|  |  | 
|  | err++; | 
|  | } | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static void i915_gem_record_fences(struct drm_device *dev, | 
|  | struct drm_i915_error_state *error) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | int i; | 
|  |  | 
|  | /* Fences */ | 
|  | switch (INTEL_INFO(dev)->gen) { | 
|  | case 7: | 
|  | case 6: | 
|  | for (i = 0; i < 16; i++) | 
|  | error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); | 
|  | break; | 
|  | case 5: | 
|  | case 4: | 
|  | for (i = 0; i < 16; i++) | 
|  | error->fence[i] = I915_READ64(FENCE_REG_965_0 + (i * 8)); | 
|  | break; | 
|  | case 3: | 
|  | if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) | 
|  | for (i = 0; i < 8; i++) | 
|  | error->fence[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4)); | 
|  | case 2: | 
|  | for (i = 0; i < 8; i++) | 
|  | error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4)); | 
|  | break; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct drm_i915_error_object * | 
|  | i915_error_first_batchbuffer(struct drm_i915_private *dev_priv, | 
|  | struct intel_ring_buffer *ring) | 
|  | { | 
|  | struct drm_i915_gem_object *obj; | 
|  | u32 seqno; | 
|  |  | 
|  | if (!ring->get_seqno) | 
|  | return NULL; | 
|  |  | 
|  | seqno = ring->get_seqno(ring); | 
|  | list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) { | 
|  | if (obj->ring != ring) | 
|  | continue; | 
|  |  | 
|  | if (i915_seqno_passed(seqno, obj->last_rendering_seqno)) | 
|  | continue; | 
|  |  | 
|  | if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0) | 
|  | continue; | 
|  |  | 
|  | /* We need to copy these to an anonymous buffer as the simplest | 
|  | * method to avoid being overwritten by userspace. | 
|  | */ | 
|  | return i915_error_object_create(dev_priv, obj); | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * i915_capture_error_state - capture an error record for later analysis | 
|  | * @dev: drm device | 
|  | * | 
|  | * Should be called when an error is detected (either a hang or an error | 
|  | * interrupt) to capture error state from the time of the error.  Fills | 
|  | * out a structure which becomes available in debugfs for user level tools | 
|  | * to pick up. | 
|  | */ | 
|  | static void i915_capture_error_state(struct drm_device *dev) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | struct drm_i915_gem_object *obj; | 
|  | struct drm_i915_error_state *error; | 
|  | unsigned long flags; | 
|  | int i, pipe; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->error_lock, flags); | 
|  | error = dev_priv->first_error; | 
|  | spin_unlock_irqrestore(&dev_priv->error_lock, flags); | 
|  | if (error) | 
|  | return; | 
|  |  | 
|  | /* Account for pipe specific data like PIPE*STAT */ | 
|  | error = kmalloc(sizeof(*error), GFP_ATOMIC); | 
|  | if (!error) { | 
|  | DRM_DEBUG_DRIVER("out of memory, not capturing error state\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | DRM_INFO("capturing error event; look for more information in /debug/dri/%d/i915_error_state\n", | 
|  | dev->primary->index); | 
|  |  | 
|  | error->seqno = dev_priv->ring[RCS].get_seqno(&dev_priv->ring[RCS]); | 
|  | error->eir = I915_READ(EIR); | 
|  | error->pgtbl_er = I915_READ(PGTBL_ER); | 
|  | for_each_pipe(pipe) | 
|  | error->pipestat[pipe] = I915_READ(PIPESTAT(pipe)); | 
|  | error->instpm = I915_READ(INSTPM); | 
|  | error->error = 0; | 
|  | if (INTEL_INFO(dev)->gen >= 6) { | 
|  | error->error = I915_READ(ERROR_GEN6); | 
|  |  | 
|  | error->bcs_acthd = I915_READ(BCS_ACTHD); | 
|  | error->bcs_ipehr = I915_READ(BCS_IPEHR); | 
|  | error->bcs_ipeir = I915_READ(BCS_IPEIR); | 
|  | error->bcs_instdone = I915_READ(BCS_INSTDONE); | 
|  | error->bcs_seqno = 0; | 
|  | if (dev_priv->ring[BCS].get_seqno) | 
|  | error->bcs_seqno = dev_priv->ring[BCS].get_seqno(&dev_priv->ring[BCS]); | 
|  |  | 
|  | error->vcs_acthd = I915_READ(VCS_ACTHD); | 
|  | error->vcs_ipehr = I915_READ(VCS_IPEHR); | 
|  | error->vcs_ipeir = I915_READ(VCS_IPEIR); | 
|  | error->vcs_instdone = I915_READ(VCS_INSTDONE); | 
|  | error->vcs_seqno = 0; | 
|  | if (dev_priv->ring[VCS].get_seqno) | 
|  | error->vcs_seqno = dev_priv->ring[VCS].get_seqno(&dev_priv->ring[VCS]); | 
|  | } | 
|  | if (INTEL_INFO(dev)->gen >= 4) { | 
|  | error->ipeir = I915_READ(IPEIR_I965); | 
|  | error->ipehr = I915_READ(IPEHR_I965); | 
|  | error->instdone = I915_READ(INSTDONE_I965); | 
|  | error->instps = I915_READ(INSTPS); | 
|  | error->instdone1 = I915_READ(INSTDONE1); | 
|  | error->acthd = I915_READ(ACTHD_I965); | 
|  | error->bbaddr = I915_READ64(BB_ADDR); | 
|  | } else { | 
|  | error->ipeir = I915_READ(IPEIR); | 
|  | error->ipehr = I915_READ(IPEHR); | 
|  | error->instdone = I915_READ(INSTDONE); | 
|  | error->acthd = I915_READ(ACTHD); | 
|  | error->bbaddr = 0; | 
|  | } | 
|  | i915_gem_record_fences(dev, error); | 
|  |  | 
|  | /* Record the active batch and ring buffers */ | 
|  | for (i = 0; i < I915_NUM_RINGS; i++) { | 
|  | error->batchbuffer[i] = | 
|  | i915_error_first_batchbuffer(dev_priv, | 
|  | &dev_priv->ring[i]); | 
|  |  | 
|  | error->ringbuffer[i] = | 
|  | i915_error_object_create(dev_priv, | 
|  | dev_priv->ring[i].obj); | 
|  | } | 
|  |  | 
|  | /* Record buffers on the active and pinned lists. */ | 
|  | error->active_bo = NULL; | 
|  | error->pinned_bo = NULL; | 
|  |  | 
|  | i = 0; | 
|  | list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) | 
|  | i++; | 
|  | error->active_bo_count = i; | 
|  | list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list) | 
|  | i++; | 
|  | error->pinned_bo_count = i - error->active_bo_count; | 
|  |  | 
|  | error->active_bo = NULL; | 
|  | error->pinned_bo = NULL; | 
|  | if (i) { | 
|  | error->active_bo = kmalloc(sizeof(*error->active_bo)*i, | 
|  | GFP_ATOMIC); | 
|  | if (error->active_bo) | 
|  | error->pinned_bo = | 
|  | error->active_bo + error->active_bo_count; | 
|  | } | 
|  |  | 
|  | if (error->active_bo) | 
|  | error->active_bo_count = | 
|  | capture_bo_list(error->active_bo, | 
|  | error->active_bo_count, | 
|  | &dev_priv->mm.active_list); | 
|  |  | 
|  | if (error->pinned_bo) | 
|  | error->pinned_bo_count = | 
|  | capture_bo_list(error->pinned_bo, | 
|  | error->pinned_bo_count, | 
|  | &dev_priv->mm.pinned_list); | 
|  |  | 
|  | do_gettimeofday(&error->time); | 
|  |  | 
|  | error->overlay = intel_overlay_capture_error_state(dev); | 
|  | error->display = intel_display_capture_error_state(dev); | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->error_lock, flags); | 
|  | if (dev_priv->first_error == NULL) { | 
|  | dev_priv->first_error = error; | 
|  | error = NULL; | 
|  | } | 
|  | spin_unlock_irqrestore(&dev_priv->error_lock, flags); | 
|  |  | 
|  | if (error) | 
|  | i915_error_state_free(dev, error); | 
|  | } | 
|  |  | 
|  | void i915_destroy_error_state(struct drm_device *dev) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | struct drm_i915_error_state *error; | 
|  |  | 
|  | spin_lock(&dev_priv->error_lock); | 
|  | error = dev_priv->first_error; | 
|  | dev_priv->first_error = NULL; | 
|  | spin_unlock(&dev_priv->error_lock); | 
|  |  | 
|  | if (error) | 
|  | i915_error_state_free(dev, error); | 
|  | } | 
|  | #else | 
|  | #define i915_capture_error_state(x) | 
|  | #endif | 
|  |  | 
|  | static void i915_report_and_clear_eir(struct drm_device *dev) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | u32 eir = I915_READ(EIR); | 
|  | int pipe; | 
|  |  | 
|  | if (!eir) | 
|  | return; | 
|  |  | 
|  | printk(KERN_ERR "render error detected, EIR: 0x%08x\n", | 
|  | eir); | 
|  |  | 
|  | if (IS_G4X(dev)) { | 
|  | if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) { | 
|  | u32 ipeir = I915_READ(IPEIR_I965); | 
|  |  | 
|  | printk(KERN_ERR "  IPEIR: 0x%08x\n", | 
|  | I915_READ(IPEIR_I965)); | 
|  | printk(KERN_ERR "  IPEHR: 0x%08x\n", | 
|  | I915_READ(IPEHR_I965)); | 
|  | printk(KERN_ERR "  INSTDONE: 0x%08x\n", | 
|  | I915_READ(INSTDONE_I965)); | 
|  | printk(KERN_ERR "  INSTPS: 0x%08x\n", | 
|  | I915_READ(INSTPS)); | 
|  | printk(KERN_ERR "  INSTDONE1: 0x%08x\n", | 
|  | I915_READ(INSTDONE1)); | 
|  | printk(KERN_ERR "  ACTHD: 0x%08x\n", | 
|  | I915_READ(ACTHD_I965)); | 
|  | I915_WRITE(IPEIR_I965, ipeir); | 
|  | POSTING_READ(IPEIR_I965); | 
|  | } | 
|  | if (eir & GM45_ERROR_PAGE_TABLE) { | 
|  | u32 pgtbl_err = I915_READ(PGTBL_ER); | 
|  | printk(KERN_ERR "page table error\n"); | 
|  | printk(KERN_ERR "  PGTBL_ER: 0x%08x\n", | 
|  | pgtbl_err); | 
|  | I915_WRITE(PGTBL_ER, pgtbl_err); | 
|  | POSTING_READ(PGTBL_ER); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!IS_GEN2(dev)) { | 
|  | if (eir & I915_ERROR_PAGE_TABLE) { | 
|  | u32 pgtbl_err = I915_READ(PGTBL_ER); | 
|  | printk(KERN_ERR "page table error\n"); | 
|  | printk(KERN_ERR "  PGTBL_ER: 0x%08x\n", | 
|  | pgtbl_err); | 
|  | I915_WRITE(PGTBL_ER, pgtbl_err); | 
|  | POSTING_READ(PGTBL_ER); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (eir & I915_ERROR_MEMORY_REFRESH) { | 
|  | printk(KERN_ERR "memory refresh error:\n"); | 
|  | for_each_pipe(pipe) | 
|  | printk(KERN_ERR "pipe %c stat: 0x%08x\n", | 
|  | pipe_name(pipe), I915_READ(PIPESTAT(pipe))); | 
|  | /* pipestat has already been acked */ | 
|  | } | 
|  | if (eir & I915_ERROR_INSTRUCTION) { | 
|  | printk(KERN_ERR "instruction error\n"); | 
|  | printk(KERN_ERR "  INSTPM: 0x%08x\n", | 
|  | I915_READ(INSTPM)); | 
|  | if (INTEL_INFO(dev)->gen < 4) { | 
|  | u32 ipeir = I915_READ(IPEIR); | 
|  |  | 
|  | printk(KERN_ERR "  IPEIR: 0x%08x\n", | 
|  | I915_READ(IPEIR)); | 
|  | printk(KERN_ERR "  IPEHR: 0x%08x\n", | 
|  | I915_READ(IPEHR)); | 
|  | printk(KERN_ERR "  INSTDONE: 0x%08x\n", | 
|  | I915_READ(INSTDONE)); | 
|  | printk(KERN_ERR "  ACTHD: 0x%08x\n", | 
|  | I915_READ(ACTHD)); | 
|  | I915_WRITE(IPEIR, ipeir); | 
|  | POSTING_READ(IPEIR); | 
|  | } else { | 
|  | u32 ipeir = I915_READ(IPEIR_I965); | 
|  |  | 
|  | printk(KERN_ERR "  IPEIR: 0x%08x\n", | 
|  | I915_READ(IPEIR_I965)); | 
|  | printk(KERN_ERR "  IPEHR: 0x%08x\n", | 
|  | I915_READ(IPEHR_I965)); | 
|  | printk(KERN_ERR "  INSTDONE: 0x%08x\n", | 
|  | I915_READ(INSTDONE_I965)); | 
|  | printk(KERN_ERR "  INSTPS: 0x%08x\n", | 
|  | I915_READ(INSTPS)); | 
|  | printk(KERN_ERR "  INSTDONE1: 0x%08x\n", | 
|  | I915_READ(INSTDONE1)); | 
|  | printk(KERN_ERR "  ACTHD: 0x%08x\n", | 
|  | I915_READ(ACTHD_I965)); | 
|  | I915_WRITE(IPEIR_I965, ipeir); | 
|  | POSTING_READ(IPEIR_I965); | 
|  | } | 
|  | } | 
|  |  | 
|  | I915_WRITE(EIR, eir); | 
|  | POSTING_READ(EIR); | 
|  | eir = I915_READ(EIR); | 
|  | if (eir) { | 
|  | /* | 
|  | * some errors might have become stuck, | 
|  | * mask them. | 
|  | */ | 
|  | DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); | 
|  | I915_WRITE(EMR, I915_READ(EMR) | eir); | 
|  | I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * i915_handle_error - handle an error interrupt | 
|  | * @dev: drm device | 
|  | * | 
|  | * Do some basic checking of regsiter state at error interrupt time and | 
|  | * dump it to the syslog.  Also call i915_capture_error_state() to make | 
|  | * sure we get a record and make it available in debugfs.  Fire a uevent | 
|  | * so userspace knows something bad happened (should trigger collection | 
|  | * of a ring dump etc.). | 
|  | */ | 
|  | void i915_handle_error(struct drm_device *dev, bool wedged) | 
|  | { | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  |  | 
|  | i915_capture_error_state(dev); | 
|  | i915_report_and_clear_eir(dev); | 
|  |  | 
|  | if (wedged) { | 
|  | INIT_COMPLETION(dev_priv->error_completion); | 
|  | atomic_set(&dev_priv->mm.wedged, 1); | 
|  |  | 
|  | /* | 
|  | * Wakeup waiting processes so they don't hang | 
|  | */ | 
|  | wake_up_all(&dev_priv->ring[RCS].irq_queue); | 
|  | if (HAS_BSD(dev)) | 
|  | wake_up_all(&dev_priv->ring[VCS].irq_queue); | 
|  | if (HAS_BLT(dev)) | 
|  | wake_up_all(&dev_priv->ring[BCS].irq_queue); | 
|  | } | 
|  |  | 
|  | queue_work(dev_priv->wq, &dev_priv->error_work); | 
|  | } | 
|  |  | 
|  | static void i915_pageflip_stall_check(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; | 
|  | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | 
|  | struct drm_i915_gem_object *obj; | 
|  | struct intel_unpin_work *work; | 
|  | unsigned long flags; | 
|  | bool stall_detected; | 
|  |  | 
|  | /* Ignore early vblank irqs */ | 
|  | if (intel_crtc == NULL) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&dev->event_lock, flags); | 
|  | work = intel_crtc->unpin_work; | 
|  |  | 
|  | if (work == NULL || work->pending || !work->enable_stall_check) { | 
|  | /* Either the pending flip IRQ arrived, or we're too early. Don't check */ | 
|  | spin_unlock_irqrestore(&dev->event_lock, flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Potential stall - if we see that the flip has happened, assume a missed interrupt */ | 
|  | obj = work->pending_flip_obj; | 
|  | if (INTEL_INFO(dev)->gen >= 4) { | 
|  | int dspsurf = DSPSURF(intel_crtc->plane); | 
|  | stall_detected = I915_READ(dspsurf) == obj->gtt_offset; | 
|  | } else { | 
|  | int dspaddr = DSPADDR(intel_crtc->plane); | 
|  | stall_detected = I915_READ(dspaddr) == (obj->gtt_offset + | 
|  | crtc->y * crtc->fb->pitch + | 
|  | crtc->x * crtc->fb->bits_per_pixel/8); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&dev->event_lock, flags); | 
|  |  | 
|  | if (stall_detected) { | 
|  | DRM_DEBUG_DRIVER("Pageflip stall detected\n"); | 
|  | intel_prepare_page_flip(dev, intel_crtc->plane); | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) | 
|  | { | 
|  | struct drm_device *dev = (struct drm_device *) arg; | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | struct drm_i915_master_private *master_priv; | 
|  | u32 iir, new_iir; | 
|  | u32 pipe_stats[I915_MAX_PIPES]; | 
|  | u32 vblank_status; | 
|  | int vblank = 0; | 
|  | unsigned long irqflags; | 
|  | int irq_received; | 
|  | int ret = IRQ_NONE, pipe; | 
|  | bool blc_event = false; | 
|  |  | 
|  | atomic_inc(&dev_priv->irq_received); | 
|  |  | 
|  | iir = I915_READ(IIR); | 
|  |  | 
|  | if (INTEL_INFO(dev)->gen >= 4) | 
|  | vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS; | 
|  | else | 
|  | vblank_status = PIPE_VBLANK_INTERRUPT_STATUS; | 
|  |  | 
|  | for (;;) { | 
|  | irq_received = iir != 0; | 
|  |  | 
|  | /* Can't rely on pipestat interrupt bit in iir as it might | 
|  | * have been cleared after the pipestat interrupt was received. | 
|  | * It doesn't set the bit in iir again, but it still produces | 
|  | * interrupts (for non-MSI). | 
|  | */ | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) | 
|  | i915_handle_error(dev, false); | 
|  |  | 
|  | for_each_pipe(pipe) { | 
|  | int reg = PIPESTAT(pipe); | 
|  | pipe_stats[pipe] = I915_READ(reg); | 
|  |  | 
|  | /* | 
|  | * Clear the PIPE*STAT regs before the IIR | 
|  | */ | 
|  | if (pipe_stats[pipe] & 0x8000ffff) { | 
|  | if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) | 
|  | DRM_DEBUG_DRIVER("pipe %c underrun\n", | 
|  | pipe_name(pipe)); | 
|  | I915_WRITE(reg, pipe_stats[pipe]); | 
|  | irq_received = 1; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  |  | 
|  | if (!irq_received) | 
|  | break; | 
|  |  | 
|  | ret = IRQ_HANDLED; | 
|  |  | 
|  | /* Consume port.  Then clear IIR or we'll miss events */ | 
|  | if ((I915_HAS_HOTPLUG(dev)) && | 
|  | (iir & I915_DISPLAY_PORT_INTERRUPT)) { | 
|  | u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); | 
|  |  | 
|  | DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n", | 
|  | hotplug_status); | 
|  | if (hotplug_status & dev_priv->hotplug_supported_mask) | 
|  | queue_work(dev_priv->wq, | 
|  | &dev_priv->hotplug_work); | 
|  |  | 
|  | I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); | 
|  | I915_READ(PORT_HOTPLUG_STAT); | 
|  | } | 
|  |  | 
|  | I915_WRITE(IIR, iir); | 
|  | new_iir = I915_READ(IIR); /* Flush posted writes */ | 
|  |  | 
|  | if (dev->primary->master) { | 
|  | master_priv = dev->primary->master->driver_priv; | 
|  | if (master_priv->sarea_priv) | 
|  | master_priv->sarea_priv->last_dispatch = | 
|  | READ_BREADCRUMB(dev_priv); | 
|  | } | 
|  |  | 
|  | if (iir & I915_USER_INTERRUPT) | 
|  | notify_ring(dev, &dev_priv->ring[RCS]); | 
|  | if (iir & I915_BSD_USER_INTERRUPT) | 
|  | notify_ring(dev, &dev_priv->ring[VCS]); | 
|  |  | 
|  | if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) { | 
|  | intel_prepare_page_flip(dev, 0); | 
|  | if (dev_priv->flip_pending_is_done) | 
|  | intel_finish_page_flip_plane(dev, 0); | 
|  | } | 
|  |  | 
|  | if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) { | 
|  | intel_prepare_page_flip(dev, 1); | 
|  | if (dev_priv->flip_pending_is_done) | 
|  | intel_finish_page_flip_plane(dev, 1); | 
|  | } | 
|  |  | 
|  | for_each_pipe(pipe) { | 
|  | if (pipe_stats[pipe] & vblank_status && | 
|  | drm_handle_vblank(dev, pipe)) { | 
|  | vblank++; | 
|  | if (!dev_priv->flip_pending_is_done) { | 
|  | i915_pageflip_stall_check(dev, pipe); | 
|  | intel_finish_page_flip(dev, pipe); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) | 
|  | blc_event = true; | 
|  | } | 
|  |  | 
|  |  | 
|  | if (blc_event || (iir & I915_ASLE_INTERRUPT)) | 
|  | intel_opregion_asle_intr(dev); | 
|  |  | 
|  | /* With MSI, interrupts are only generated when iir | 
|  | * transitions from zero to nonzero.  If another bit got | 
|  | * set while we were handling the existing iir bits, then | 
|  | * we would never get another interrupt. | 
|  | * | 
|  | * This is fine on non-MSI as well, as if we hit this path | 
|  | * we avoid exiting the interrupt handler only to generate | 
|  | * another one. | 
|  | * | 
|  | * Note that for MSI this could cause a stray interrupt report | 
|  | * if an interrupt landed in the time between writing IIR and | 
|  | * the posting read.  This should be rare enough to never | 
|  | * trigger the 99% of 100,000 interrupts test for disabling | 
|  | * stray interrupts. | 
|  | */ | 
|  | iir = new_iir; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int i915_emit_irq(struct drm_device * dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; | 
|  |  | 
|  | i915_kernel_lost_context(dev); | 
|  |  | 
|  | DRM_DEBUG_DRIVER("\n"); | 
|  |  | 
|  | dev_priv->counter++; | 
|  | if (dev_priv->counter > 0x7FFFFFFFUL) | 
|  | dev_priv->counter = 1; | 
|  | if (master_priv->sarea_priv) | 
|  | master_priv->sarea_priv->last_enqueue = dev_priv->counter; | 
|  |  | 
|  | if (BEGIN_LP_RING(4) == 0) { | 
|  | OUT_RING(MI_STORE_DWORD_INDEX); | 
|  | OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); | 
|  | OUT_RING(dev_priv->counter); | 
|  | OUT_RING(MI_USER_INTERRUPT); | 
|  | ADVANCE_LP_RING(); | 
|  | } | 
|  |  | 
|  | return dev_priv->counter; | 
|  | } | 
|  |  | 
|  | static int i915_wait_irq(struct drm_device * dev, int irq_nr) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; | 
|  | int ret = 0; | 
|  | struct intel_ring_buffer *ring = LP_RING(dev_priv); | 
|  |  | 
|  | DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr, | 
|  | READ_BREADCRUMB(dev_priv)); | 
|  |  | 
|  | if (READ_BREADCRUMB(dev_priv) >= irq_nr) { | 
|  | if (master_priv->sarea_priv) | 
|  | master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (master_priv->sarea_priv) | 
|  | master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; | 
|  |  | 
|  | if (ring->irq_get(ring)) { | 
|  | DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ, | 
|  | READ_BREADCRUMB(dev_priv) >= irq_nr); | 
|  | ring->irq_put(ring); | 
|  | } else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000)) | 
|  | ret = -EBUSY; | 
|  |  | 
|  | if (ret == -EBUSY) { | 
|  | DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", | 
|  | READ_BREADCRUMB(dev_priv), (int)dev_priv->counter); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Needs the lock as it touches the ring. | 
|  | */ | 
|  | int i915_irq_emit(struct drm_device *dev, void *data, | 
|  | struct drm_file *file_priv) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | drm_i915_irq_emit_t *emit = data; | 
|  | int result; | 
|  |  | 
|  | if (!dev_priv || !LP_RING(dev_priv)->virtual_start) { | 
|  | DRM_ERROR("called with no initialization\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | RING_LOCK_TEST_WITH_RETURN(dev, file_priv); | 
|  |  | 
|  | mutex_lock(&dev->struct_mutex); | 
|  | result = i915_emit_irq(dev); | 
|  | mutex_unlock(&dev->struct_mutex); | 
|  |  | 
|  | if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { | 
|  | DRM_ERROR("copy_to_user\n"); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Doesn't need the hardware lock. | 
|  | */ | 
|  | int i915_irq_wait(struct drm_device *dev, void *data, | 
|  | struct drm_file *file_priv) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | drm_i915_irq_wait_t *irqwait = data; | 
|  |  | 
|  | if (!dev_priv) { | 
|  | DRM_ERROR("called with no initialization\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return i915_wait_irq(dev, irqwait->irq_seq); | 
|  | } | 
|  |  | 
|  | /* Called from drm generic code, passed 'crtc' which | 
|  | * we use as a pipe index | 
|  | */ | 
|  | static int i915_enable_vblank(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | if (!i915_pipe_enabled(dev, pipe)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | if (INTEL_INFO(dev)->gen >= 4) | 
|  | i915_enable_pipestat(dev_priv, pipe, | 
|  | PIPE_START_VBLANK_INTERRUPT_ENABLE); | 
|  | else | 
|  | i915_enable_pipestat(dev_priv, pipe, | 
|  | PIPE_VBLANK_INTERRUPT_ENABLE); | 
|  |  | 
|  | /* maintain vblank delivery even in deep C-states */ | 
|  | if (dev_priv->info->gen == 3) | 
|  | I915_WRITE(INSTPM, INSTPM_AGPBUSY_DIS << 16); | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ironlake_enable_vblank(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | if (!i915_pipe_enabled(dev, pipe)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | ironlake_enable_display_irq(dev_priv, (pipe == 0) ? | 
|  | DE_PIPEA_VBLANK : DE_PIPEB_VBLANK); | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ivybridge_enable_vblank(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | if (!i915_pipe_enabled(dev, pipe)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | ironlake_enable_display_irq(dev_priv, (pipe == 0) ? | 
|  | DE_PIPEA_VBLANK_IVB : DE_PIPEB_VBLANK_IVB); | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Called from drm generic code, passed 'crtc' which | 
|  | * we use as a pipe index | 
|  | */ | 
|  | static void i915_disable_vblank(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | if (dev_priv->info->gen == 3) | 
|  | I915_WRITE(INSTPM, | 
|  | INSTPM_AGPBUSY_DIS << 16 | INSTPM_AGPBUSY_DIS); | 
|  |  | 
|  | i915_disable_pipestat(dev_priv, pipe, | 
|  | PIPE_VBLANK_INTERRUPT_ENABLE | | 
|  | PIPE_START_VBLANK_INTERRUPT_ENABLE); | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  | } | 
|  |  | 
|  | static void ironlake_disable_vblank(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | ironlake_disable_display_irq(dev_priv, (pipe == 0) ? | 
|  | DE_PIPEA_VBLANK : DE_PIPEB_VBLANK); | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  | } | 
|  |  | 
|  | static void ivybridge_disable_vblank(struct drm_device *dev, int pipe) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | unsigned long irqflags; | 
|  |  | 
|  | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); | 
|  | ironlake_disable_display_irq(dev_priv, (pipe == 0) ? | 
|  | DE_PIPEA_VBLANK_IVB : DE_PIPEB_VBLANK_IVB); | 
|  | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); | 
|  | } | 
|  |  | 
|  | /* Set the vblank monitor pipe | 
|  | */ | 
|  | int i915_vblank_pipe_set(struct drm_device *dev, void *data, | 
|  | struct drm_file *file_priv) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  |  | 
|  | if (!dev_priv) { | 
|  | DRM_ERROR("called with no initialization\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int i915_vblank_pipe_get(struct drm_device *dev, void *data, | 
|  | struct drm_file *file_priv) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | drm_i915_vblank_pipe_t *pipe = data; | 
|  |  | 
|  | if (!dev_priv) { | 
|  | DRM_ERROR("called with no initialization\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Schedule buffer swap at given vertical blank. | 
|  | */ | 
|  | int i915_vblank_swap(struct drm_device *dev, void *data, | 
|  | struct drm_file *file_priv) | 
|  | { | 
|  | /* The delayed swap mechanism was fundamentally racy, and has been | 
|  | * removed.  The model was that the client requested a delayed flip/swap | 
|  | * from the kernel, then waited for vblank before continuing to perform | 
|  | * rendering.  The problem was that the kernel might wake the client | 
|  | * up before it dispatched the vblank swap (since the lock has to be | 
|  | * held while touching the ringbuffer), in which case the client would | 
|  | * clear and start the next frame before the swap occurred, and | 
|  | * flicker would occur in addition to likely missing the vblank. | 
|  | * | 
|  | * In the absence of this ioctl, userland falls back to a correct path | 
|  | * of waiting for a vblank, then dispatching the swap on its own. | 
|  | * Context switching to userland and back is plenty fast enough for | 
|  | * meeting the requirements of vblank swapping. | 
|  | */ | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static u32 | 
|  | ring_last_seqno(struct intel_ring_buffer *ring) | 
|  | { | 
|  | return list_entry(ring->request_list.prev, | 
|  | struct drm_i915_gem_request, list)->seqno; | 
|  | } | 
|  |  | 
|  | static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err) | 
|  | { | 
|  | if (list_empty(&ring->request_list) || | 
|  | i915_seqno_passed(ring->get_seqno(ring), ring_last_seqno(ring))) { | 
|  | /* Issue a wake-up to catch stuck h/w. */ | 
|  | if (ring->waiting_seqno && waitqueue_active(&ring->irq_queue)) { | 
|  | DRM_ERROR("Hangcheck timer elapsed... %s idle [waiting on %d, at %d], missed IRQ?\n", | 
|  | ring->name, | 
|  | ring->waiting_seqno, | 
|  | ring->get_seqno(ring)); | 
|  | wake_up_all(&ring->irq_queue); | 
|  | *err = true; | 
|  | } | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool kick_ring(struct intel_ring_buffer *ring) | 
|  | { | 
|  | struct drm_device *dev = ring->dev; | 
|  | struct drm_i915_private *dev_priv = dev->dev_private; | 
|  | u32 tmp = I915_READ_CTL(ring); | 
|  | if (tmp & RING_WAIT) { | 
|  | DRM_ERROR("Kicking stuck wait on %s\n", | 
|  | ring->name); | 
|  | I915_WRITE_CTL(ring, tmp); | 
|  | return true; | 
|  | } | 
|  | if (IS_GEN6(dev) && | 
|  | (tmp & RING_WAIT_SEMAPHORE)) { | 
|  | DRM_ERROR("Kicking stuck semaphore on %s\n", | 
|  | ring->name); | 
|  | I915_WRITE_CTL(ring, tmp); | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * This is called when the chip hasn't reported back with completed | 
|  | * batchbuffers in a long time. The first time this is called we simply record | 
|  | * ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses | 
|  | * again, we assume the chip is wedged and try to fix it. | 
|  | */ | 
|  | void i915_hangcheck_elapsed(unsigned long data) | 
|  | { | 
|  | struct drm_device *dev = (struct drm_device *)data; | 
|  | drm_i915_private_t *dev_priv = dev->dev_private; | 
|  | uint32_t acthd, instdone, instdone1; | 
|  | bool err = false; | 
|  |  | 
|  | if (!i915_enable_hangcheck) | 
|  | return; | 
|  |  | 
|  | /* If all work is done then ACTHD clearly hasn't advanced. */ | 
|  | if (i915_hangcheck_ring_idle(&dev_priv->ring[RCS], &err) && | 
|  | i915_hangcheck_ring_idle(&dev_priv->ring[VCS], &err) && | 
|  | i915_hangcheck_ring_idle(&dev_priv->ring[BCS], &err)) { | 
|  | dev_priv->hangcheck_count = 0; | 
|  | if (err) | 
|  | goto repeat; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (INTEL_INFO(dev)->gen < 4) { | 
|  | acthd = I915_READ(ACTHD); | 
|  | instdone = I915_READ(INSTDONE); | 
|  | instdone1 = 0; | 
|  | } else { | 
|  | acthd = I915_READ(ACTHD_I965); | 
|  | instdone = I915_READ(INSTDONE_I965); | 
|  | instdone1 = I915_READ(INSTDONE1); | 
|  | } | 
|  |  | 
|  | if (dev_priv->last_acthd == acthd && | 
|  | dev_priv->last_instdone == instdone && | 
|  | dev_priv->last_instdone1 == instdone1) { | 
|  | if (dev_priv->hangcheck_count++ > 1) { | 
|  | DRM_ERROR("Hangcheck timer elapsed... GPU hung\n"); | 
|  |  | 
|  | if (!IS_GEN2(dev)) { | 
|  | /* Is the chip hanging on a WAIT_FOR_EVENT? | 
|  | * If so we can simply poke the RB_WAIT bit | 
|  | * and break the hang. This should work on | 
|  | * all but the second generation chipsets. | 
|  | */ | 
|  |  | 
|  | if (kick_ring(&dev_priv->ring[RCS])) | 
|  | goto repeat; | 
|  |  | 
|  | if (HAS_BSD(dev) && | 
|  | kick_ring(&dev_priv->ring[VCS])) | 
|  | goto repeat; | 
|  |  | 
|  | if (HAS_BLT(dev) && | 
|  | kick_ring(&dev_priv->ring[BCS])) | 
|  | goto repeat; | 
|  | } | 
|  |  | 
|  | i915_handle_error(dev, true); | 
|  | return; | 
|  | } | 
|  | } else { | 
|  | dev_priv->hangcheck_count = 0; | 
|  |  | 
|  | dev_priv->last_acthd = acthd; | 
|  | dev_priv->last_instdone = instdone; | 
|  | dev_priv->last_instdone1 = instdone1; | 
|  | } | 
|  |  | 
|  | repeat: | 
|  | /* Reset timer case chip hangs without another request being added */ | 
|  | mod_timer(&dev_priv->hangcheck_timer, | 
|  | jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); | 
|  | } | 
|  |  | 
|  | /* drm_dma.h hooks | 
|  | */ | 
|  | static void ironlake_irq_preinstall(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  |  | 
|  | atomic_set(&dev_priv->irq_received, 0); | 
|  |  | 
|  | INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); | 
|  | INIT_WORK(&dev_priv->error_work, i915_error_work_func); | 
|  | if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) | 
|  | INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); | 
|  |  | 
|  | I915_WRITE(HWSTAM, 0xeffe); | 
|  | if (IS_GEN6(dev) || IS_GEN7(dev)) { | 
|  | /* Workaround stalls observed on Sandy Bridge GPUs by | 
|  | * making the blitter command streamer generate a | 
|  | * write to the Hardware Status Page for | 
|  | * MI_USER_INTERRUPT.  This appears to serialize the | 
|  | * previous seqno write out before the interrupt | 
|  | * happens. | 
|  | */ | 
|  | I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT); | 
|  | I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT); | 
|  | } | 
|  |  | 
|  | /* XXX hotplug from PCH */ | 
|  |  | 
|  | I915_WRITE(DEIMR, 0xffffffff); | 
|  | I915_WRITE(DEIER, 0x0); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | /* and GT */ | 
|  | I915_WRITE(GTIMR, 0xffffffff); | 
|  | I915_WRITE(GTIER, 0x0); | 
|  | POSTING_READ(GTIER); | 
|  |  | 
|  | /* south display irq */ | 
|  | I915_WRITE(SDEIMR, 0xffffffff); | 
|  | I915_WRITE(SDEIER, 0x0); | 
|  | POSTING_READ(SDEIER); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable digital hotplug on the PCH, and configure the DP short pulse | 
|  | * duration to 2ms (which is the minimum in the Display Port spec) | 
|  | * | 
|  | * This register is the same on all known PCH chips. | 
|  | */ | 
|  |  | 
|  | static void ironlake_enable_pch_hotplug(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | u32	hotplug; | 
|  |  | 
|  | hotplug = I915_READ(PCH_PORT_HOTPLUG); | 
|  | hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK); | 
|  | hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; | 
|  | hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms; | 
|  | hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms; | 
|  | I915_WRITE(PCH_PORT_HOTPLUG, hotplug); | 
|  | } | 
|  |  | 
|  | static int ironlake_irq_postinstall(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | /* enable kind of interrupts always enabled */ | 
|  | u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | | 
|  | DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE; | 
|  | u32 render_irqs; | 
|  | u32 hotplug_mask; | 
|  |  | 
|  | DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue); | 
|  | if (HAS_BSD(dev)) | 
|  | DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue); | 
|  | if (HAS_BLT(dev)) | 
|  | DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue); | 
|  |  | 
|  | dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; | 
|  | dev_priv->irq_mask = ~display_mask; | 
|  |  | 
|  | /* should always can generate irq */ | 
|  | I915_WRITE(DEIIR, I915_READ(DEIIR)); | 
|  | I915_WRITE(DEIMR, dev_priv->irq_mask); | 
|  | I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | dev_priv->gt_irq_mask = ~0; | 
|  |  | 
|  | I915_WRITE(GTIIR, I915_READ(GTIIR)); | 
|  | I915_WRITE(GTIMR, dev_priv->gt_irq_mask); | 
|  |  | 
|  | if (IS_GEN6(dev)) | 
|  | render_irqs = | 
|  | GT_USER_INTERRUPT | | 
|  | GT_GEN6_BSD_USER_INTERRUPT | | 
|  | GT_BLT_USER_INTERRUPT; | 
|  | else | 
|  | render_irqs = | 
|  | GT_USER_INTERRUPT | | 
|  | GT_PIPE_NOTIFY | | 
|  | GT_BSD_USER_INTERRUPT; | 
|  | I915_WRITE(GTIER, render_irqs); | 
|  | POSTING_READ(GTIER); | 
|  |  | 
|  | if (HAS_PCH_CPT(dev)) { | 
|  | hotplug_mask = (SDE_CRT_HOTPLUG_CPT | | 
|  | SDE_PORTB_HOTPLUG_CPT | | 
|  | SDE_PORTC_HOTPLUG_CPT | | 
|  | SDE_PORTD_HOTPLUG_CPT); | 
|  | } else { | 
|  | hotplug_mask = (SDE_CRT_HOTPLUG | | 
|  | SDE_PORTB_HOTPLUG | | 
|  | SDE_PORTC_HOTPLUG | | 
|  | SDE_PORTD_HOTPLUG | | 
|  | SDE_AUX_MASK); | 
|  | } | 
|  |  | 
|  | dev_priv->pch_irq_mask = ~hotplug_mask; | 
|  |  | 
|  | I915_WRITE(SDEIIR, I915_READ(SDEIIR)); | 
|  | I915_WRITE(SDEIMR, dev_priv->pch_irq_mask); | 
|  | I915_WRITE(SDEIER, hotplug_mask); | 
|  | POSTING_READ(SDEIER); | 
|  |  | 
|  | ironlake_enable_pch_hotplug(dev); | 
|  |  | 
|  | if (IS_IRONLAKE_M(dev)) { | 
|  | /* Clear & enable PCU event interrupts */ | 
|  | I915_WRITE(DEIIR, DE_PCU_EVENT); | 
|  | I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT); | 
|  | ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ivybridge_irq_postinstall(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | /* enable kind of interrupts always enabled */ | 
|  | u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | | 
|  | DE_PCH_EVENT_IVB | DE_PLANEA_FLIP_DONE_IVB | | 
|  | DE_PLANEB_FLIP_DONE_IVB; | 
|  | u32 render_irqs; | 
|  | u32 hotplug_mask; | 
|  |  | 
|  | DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue); | 
|  | if (HAS_BSD(dev)) | 
|  | DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue); | 
|  | if (HAS_BLT(dev)) | 
|  | DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue); | 
|  |  | 
|  | dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; | 
|  | dev_priv->irq_mask = ~display_mask; | 
|  |  | 
|  | /* should always can generate irq */ | 
|  | I915_WRITE(DEIIR, I915_READ(DEIIR)); | 
|  | I915_WRITE(DEIMR, dev_priv->irq_mask); | 
|  | I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK_IVB | | 
|  | DE_PIPEB_VBLANK_IVB); | 
|  | POSTING_READ(DEIER); | 
|  |  | 
|  | dev_priv->gt_irq_mask = ~0; | 
|  |  | 
|  | I915_WRITE(GTIIR, I915_READ(GTIIR)); | 
|  | I915_WRITE(GTIMR, dev_priv->gt_irq_mask); | 
|  |  | 
|  | render_irqs = GT_USER_INTERRUPT | GT_GEN6_BSD_USER_INTERRUPT | | 
|  | GT_BLT_USER_INTERRUPT; | 
|  | I915_WRITE(GTIER, render_irqs); | 
|  | POSTING_READ(GTIER); | 
|  |  | 
|  | hotplug_mask = (SDE_CRT_HOTPLUG_CPT | | 
|  | SDE_PORTB_HOTPLUG_CPT | | 
|  | SDE_PORTC_HOTPLUG_CPT | | 
|  | SDE_PORTD_HOTPLUG_CPT); | 
|  | dev_priv->pch_irq_mask = ~hotplug_mask; | 
|  |  | 
|  | I915_WRITE(SDEIIR, I915_READ(SDEIIR)); | 
|  | I915_WRITE(SDEIMR, dev_priv->pch_irq_mask); | 
|  | I915_WRITE(SDEIER, hotplug_mask); | 
|  | POSTING_READ(SDEIER); | 
|  |  | 
|  | ironlake_enable_pch_hotplug(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void i915_driver_irq_preinstall(struct drm_device * dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | int pipe; | 
|  |  | 
|  | atomic_set(&dev_priv->irq_received, 0); | 
|  |  | 
|  | INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); | 
|  | INIT_WORK(&dev_priv->error_work, i915_error_work_func); | 
|  |  | 
|  | if (I915_HAS_HOTPLUG(dev)) { | 
|  | I915_WRITE(PORT_HOTPLUG_EN, 0); | 
|  | I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); | 
|  | } | 
|  |  | 
|  | I915_WRITE(HWSTAM, 0xeffe); | 
|  | for_each_pipe(pipe) | 
|  | I915_WRITE(PIPESTAT(pipe), 0); | 
|  | I915_WRITE(IMR, 0xffffffff); | 
|  | I915_WRITE(IER, 0x0); | 
|  | POSTING_READ(IER); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Must be called after intel_modeset_init or hotplug interrupts won't be | 
|  | * enabled correctly. | 
|  | */ | 
|  | static int i915_driver_irq_postinstall(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; | 
|  | u32 error_mask; | 
|  |  | 
|  | dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; | 
|  |  | 
|  | /* Unmask the interrupts that we always want on. */ | 
|  | dev_priv->irq_mask = ~I915_INTERRUPT_ENABLE_FIX; | 
|  |  | 
|  | dev_priv->pipestat[0] = 0; | 
|  | dev_priv->pipestat[1] = 0; | 
|  |  | 
|  | if (I915_HAS_HOTPLUG(dev)) { | 
|  | /* Enable in IER... */ | 
|  | enable_mask |= I915_DISPLAY_PORT_INTERRUPT; | 
|  | /* and unmask in IMR */ | 
|  | dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable some error detection, note the instruction error mask | 
|  | * bit is reserved, so we leave it masked. | 
|  | */ | 
|  | if (IS_G4X(dev)) { | 
|  | error_mask = ~(GM45_ERROR_PAGE_TABLE | | 
|  | GM45_ERROR_MEM_PRIV | | 
|  | GM45_ERROR_CP_PRIV | | 
|  | I915_ERROR_MEMORY_REFRESH); | 
|  | } else { | 
|  | error_mask = ~(I915_ERROR_PAGE_TABLE | | 
|  | I915_ERROR_MEMORY_REFRESH); | 
|  | } | 
|  | I915_WRITE(EMR, error_mask); | 
|  |  | 
|  | I915_WRITE(IMR, dev_priv->irq_mask); | 
|  | I915_WRITE(IER, enable_mask); | 
|  | POSTING_READ(IER); | 
|  |  | 
|  | if (I915_HAS_HOTPLUG(dev)) { | 
|  | u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); | 
|  |  | 
|  | /* Note HDMI and DP share bits */ | 
|  | if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) | 
|  | hotplug_en |= HDMIB_HOTPLUG_INT_EN; | 
|  | if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) | 
|  | hotplug_en |= HDMIC_HOTPLUG_INT_EN; | 
|  | if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) | 
|  | hotplug_en |= HDMID_HOTPLUG_INT_EN; | 
|  | if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS) | 
|  | hotplug_en |= SDVOC_HOTPLUG_INT_EN; | 
|  | if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS) | 
|  | hotplug_en |= SDVOB_HOTPLUG_INT_EN; | 
|  | if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) { | 
|  | hotplug_en |= CRT_HOTPLUG_INT_EN; | 
|  |  | 
|  | /* Programming the CRT detection parameters tends | 
|  | to generate a spurious hotplug event about three | 
|  | seconds later.  So just do it once. | 
|  | */ | 
|  | if (IS_G4X(dev)) | 
|  | hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; | 
|  | hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; | 
|  | } | 
|  |  | 
|  | /* Ignore TV since it's buggy */ | 
|  |  | 
|  | I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); | 
|  | } | 
|  |  | 
|  | intel_opregion_enable_asle(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ironlake_irq_uninstall(struct drm_device *dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  |  | 
|  | if (!dev_priv) | 
|  | return; | 
|  |  | 
|  | dev_priv->vblank_pipe = 0; | 
|  |  | 
|  | I915_WRITE(HWSTAM, 0xffffffff); | 
|  |  | 
|  | I915_WRITE(DEIMR, 0xffffffff); | 
|  | I915_WRITE(DEIER, 0x0); | 
|  | I915_WRITE(DEIIR, I915_READ(DEIIR)); | 
|  |  | 
|  | I915_WRITE(GTIMR, 0xffffffff); | 
|  | I915_WRITE(GTIER, 0x0); | 
|  | I915_WRITE(GTIIR, I915_READ(GTIIR)); | 
|  |  | 
|  | I915_WRITE(SDEIMR, 0xffffffff); | 
|  | I915_WRITE(SDEIER, 0x0); | 
|  | I915_WRITE(SDEIIR, I915_READ(SDEIIR)); | 
|  | } | 
|  |  | 
|  | static void i915_driver_irq_uninstall(struct drm_device * dev) | 
|  | { | 
|  | drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; | 
|  | int pipe; | 
|  |  | 
|  | if (!dev_priv) | 
|  | return; | 
|  |  | 
|  | dev_priv->vblank_pipe = 0; | 
|  |  | 
|  | if (I915_HAS_HOTPLUG(dev)) { | 
|  | I915_WRITE(PORT_HOTPLUG_EN, 0); | 
|  | I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); | 
|  | } | 
|  |  | 
|  | I915_WRITE(HWSTAM, 0xffffffff); | 
|  | for_each_pipe(pipe) | 
|  | I915_WRITE(PIPESTAT(pipe), 0); | 
|  | I915_WRITE(IMR, 0xffffffff); | 
|  | I915_WRITE(IER, 0x0); | 
|  |  | 
|  | for_each_pipe(pipe) | 
|  | I915_WRITE(PIPESTAT(pipe), | 
|  | I915_READ(PIPESTAT(pipe)) & 0x8000ffff); | 
|  | I915_WRITE(IIR, I915_READ(IIR)); | 
|  | } | 
|  |  | 
|  | void intel_irq_init(struct drm_device *dev) | 
|  | { | 
|  | dev->driver->get_vblank_counter = i915_get_vblank_counter; | 
|  | dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ | 
|  | if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { | 
|  | dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ | 
|  | dev->driver->get_vblank_counter = gm45_get_vblank_counter; | 
|  | } | 
|  |  | 
|  | if (drm_core_check_feature(dev, DRIVER_MODESET)) | 
|  | dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp; | 
|  | else | 
|  | dev->driver->get_vblank_timestamp = NULL; | 
|  | dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; | 
|  |  | 
|  | if (IS_IVYBRIDGE(dev)) { | 
|  | /* Share pre & uninstall handlers with ILK/SNB */ | 
|  | dev->driver->irq_handler = ivybridge_irq_handler; | 
|  | dev->driver->irq_preinstall = ironlake_irq_preinstall; | 
|  | dev->driver->irq_postinstall = ivybridge_irq_postinstall; | 
|  | dev->driver->irq_uninstall = ironlake_irq_uninstall; | 
|  | dev->driver->enable_vblank = ivybridge_enable_vblank; | 
|  | dev->driver->disable_vblank = ivybridge_disable_vblank; | 
|  | } else if (HAS_PCH_SPLIT(dev)) { | 
|  | dev->driver->irq_handler = ironlake_irq_handler; | 
|  | dev->driver->irq_preinstall = ironlake_irq_preinstall; | 
|  | dev->driver->irq_postinstall = ironlake_irq_postinstall; | 
|  | dev->driver->irq_uninstall = ironlake_irq_uninstall; | 
|  | dev->driver->enable_vblank = ironlake_enable_vblank; | 
|  | dev->driver->disable_vblank = ironlake_disable_vblank; | 
|  | } else { | 
|  | dev->driver->irq_preinstall = i915_driver_irq_preinstall; | 
|  | dev->driver->irq_postinstall = i915_driver_irq_postinstall; | 
|  | dev->driver->irq_uninstall = i915_driver_irq_uninstall; | 
|  | dev->driver->irq_handler = i915_driver_irq_handler; | 
|  | dev->driver->enable_vblank = i915_enable_vblank; | 
|  | dev->driver->disable_vblank = i915_disable_vblank; | 
|  | } | 
|  | } |