| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Oracle. All Rights Reserved. |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_shared.h" |
| #include "xfs_format.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_bit.h" |
| #include "xfs_sb.h" |
| #include "xfs_mount.h" |
| #include "xfs_defer.h" |
| #include "xfs_trans.h" |
| #include "xfs_buf_item.h" |
| #include "xfs_inode.h" |
| #include "xfs_inode_item.h" |
| #include "xfs_trace.h" |
| |
| /* |
| * Deferred Operations in XFS |
| * |
| * Due to the way locking rules work in XFS, certain transactions (block |
| * mapping and unmapping, typically) have permanent reservations so that |
| * we can roll the transaction to adhere to AG locking order rules and |
| * to unlock buffers between metadata updates. Prior to rmap/reflink, |
| * the mapping code had a mechanism to perform these deferrals for |
| * extents that were going to be freed; this code makes that facility |
| * more generic. |
| * |
| * When adding the reverse mapping and reflink features, it became |
| * necessary to perform complex remapping multi-transactions to comply |
| * with AG locking order rules, and to be able to spread a single |
| * refcount update operation (an operation on an n-block extent can |
| * update as many as n records!) among multiple transactions. XFS can |
| * roll a transaction to facilitate this, but using this facility |
| * requires us to log "intent" items in case log recovery needs to |
| * redo the operation, and to log "done" items to indicate that redo |
| * is not necessary. |
| * |
| * Deferred work is tracked in xfs_defer_pending items. Each pending |
| * item tracks one type of deferred work. Incoming work items (which |
| * have not yet had an intent logged) are attached to a pending item |
| * on the dop_intake list, where they wait for the caller to finish |
| * the deferred operations. |
| * |
| * Finishing a set of deferred operations is an involved process. To |
| * start, we define "rolling a deferred-op transaction" as follows: |
| * |
| * > For each xfs_defer_pending item on the dop_intake list, |
| * - Sort the work items in AG order. XFS locking |
| * order rules require us to lock buffers in AG order. |
| * - Create a log intent item for that type. |
| * - Attach it to the pending item. |
| * - Move the pending item from the dop_intake list to the |
| * dop_pending list. |
| * > Roll the transaction. |
| * |
| * NOTE: To avoid exceeding the transaction reservation, we limit the |
| * number of items that we attach to a given xfs_defer_pending. |
| * |
| * The actual finishing process looks like this: |
| * |
| * > For each xfs_defer_pending in the dop_pending list, |
| * - Roll the deferred-op transaction as above. |
| * - Create a log done item for that type, and attach it to the |
| * log intent item. |
| * - For each work item attached to the log intent item, |
| * * Perform the described action. |
| * * Attach the work item to the log done item. |
| * * If the result of doing the work was -EAGAIN, ->finish work |
| * wants a new transaction. See the "Requesting a Fresh |
| * Transaction while Finishing Deferred Work" section below for |
| * details. |
| * |
| * The key here is that we must log an intent item for all pending |
| * work items every time we roll the transaction, and that we must log |
| * a done item as soon as the work is completed. With this mechanism |
| * we can perform complex remapping operations, chaining intent items |
| * as needed. |
| * |
| * Requesting a Fresh Transaction while Finishing Deferred Work |
| * |
| * If ->finish_item decides that it needs a fresh transaction to |
| * finish the work, it must ask its caller (xfs_defer_finish) for a |
| * continuation. The most likely cause of this circumstance are the |
| * refcount adjust functions deciding that they've logged enough items |
| * to be at risk of exceeding the transaction reservation. |
| * |
| * To get a fresh transaction, we want to log the existing log done |
| * item to prevent the log intent item from replaying, immediately log |
| * a new log intent item with the unfinished work items, roll the |
| * transaction, and re-call ->finish_item wherever it left off. The |
| * log done item and the new log intent item must be in the same |
| * transaction or atomicity cannot be guaranteed; defer_finish ensures |
| * that this happens. |
| * |
| * This requires some coordination between ->finish_item and |
| * defer_finish. Upon deciding to request a new transaction, |
| * ->finish_item should update the current work item to reflect the |
| * unfinished work. Next, it should reset the log done item's list |
| * count to the number of items finished, and return -EAGAIN. |
| * defer_finish sees the -EAGAIN, logs the new log intent item |
| * with the remaining work items, and leaves the xfs_defer_pending |
| * item at the head of the dop_work queue. Then it rolls the |
| * transaction and picks up processing where it left off. It is |
| * required that ->finish_item must be careful to leave enough |
| * transaction reservation to fit the new log intent item. |
| * |
| * This is an example of remapping the extent (E, E+B) into file X at |
| * offset A and dealing with the extent (C, C+B) already being mapped |
| * there: |
| * +-------------------------------------------------+ |
| * | Unmap file X startblock C offset A length B | t0 |
| * | Intent to reduce refcount for extent (C, B) | |
| * | Intent to remove rmap (X, C, A, B) | |
| * | Intent to free extent (D, 1) (bmbt block) | |
| * | Intent to map (X, A, B) at startblock E | |
| * +-------------------------------------------------+ |
| * | Map file X startblock E offset A length B | t1 |
| * | Done mapping (X, E, A, B) | |
| * | Intent to increase refcount for extent (E, B) | |
| * | Intent to add rmap (X, E, A, B) | |
| * +-------------------------------------------------+ |
| * | Reduce refcount for extent (C, B) | t2 |
| * | Done reducing refcount for extent (C, 9) | |
| * | Intent to reduce refcount for extent (C+9, B-9) | |
| * | (ran out of space after 9 refcount updates) | |
| * +-------------------------------------------------+ |
| * | Reduce refcount for extent (C+9, B+9) | t3 |
| * | Done reducing refcount for extent (C+9, B-9) | |
| * | Increase refcount for extent (E, B) | |
| * | Done increasing refcount for extent (E, B) | |
| * | Intent to free extent (C, B) | |
| * | Intent to free extent (F, 1) (refcountbt block) | |
| * | Intent to remove rmap (F, 1, REFC) | |
| * +-------------------------------------------------+ |
| * | Remove rmap (X, C, A, B) | t4 |
| * | Done removing rmap (X, C, A, B) | |
| * | Add rmap (X, E, A, B) | |
| * | Done adding rmap (X, E, A, B) | |
| * | Remove rmap (F, 1, REFC) | |
| * | Done removing rmap (F, 1, REFC) | |
| * +-------------------------------------------------+ |
| * | Free extent (C, B) | t5 |
| * | Done freeing extent (C, B) | |
| * | Free extent (D, 1) | |
| * | Done freeing extent (D, 1) | |
| * | Free extent (F, 1) | |
| * | Done freeing extent (F, 1) | |
| * +-------------------------------------------------+ |
| * |
| * If we should crash before t2 commits, log recovery replays |
| * the following intent items: |
| * |
| * - Intent to reduce refcount for extent (C, B) |
| * - Intent to remove rmap (X, C, A, B) |
| * - Intent to free extent (D, 1) (bmbt block) |
| * - Intent to increase refcount for extent (E, B) |
| * - Intent to add rmap (X, E, A, B) |
| * |
| * In the process of recovering, it should also generate and take care |
| * of these intent items: |
| * |
| * - Intent to free extent (C, B) |
| * - Intent to free extent (F, 1) (refcountbt block) |
| * - Intent to remove rmap (F, 1, REFC) |
| * |
| * Note that the continuation requested between t2 and t3 is likely to |
| * reoccur. |
| */ |
| |
| static const struct xfs_defer_op_type *defer_op_types[XFS_DEFER_OPS_TYPE_MAX]; |
| |
| /* |
| * For each pending item in the intake list, log its intent item and the |
| * associated extents, then add the entire intake list to the end of |
| * the pending list. |
| */ |
| STATIC void |
| xfs_defer_create_intents( |
| struct xfs_trans *tp) |
| { |
| struct list_head *li; |
| struct xfs_defer_pending *dfp; |
| |
| list_for_each_entry(dfp, &tp->t_dfops, dfp_list) { |
| dfp->dfp_intent = dfp->dfp_type->create_intent(tp, |
| dfp->dfp_count); |
| trace_xfs_defer_create_intent(tp->t_mountp, dfp); |
| list_sort(tp->t_mountp, &dfp->dfp_work, |
| dfp->dfp_type->diff_items); |
| list_for_each(li, &dfp->dfp_work) |
| dfp->dfp_type->log_item(tp, dfp->dfp_intent, li); |
| } |
| } |
| |
| /* Abort all the intents that were committed. */ |
| STATIC void |
| xfs_defer_trans_abort( |
| struct xfs_trans *tp, |
| struct list_head *dop_pending) |
| { |
| struct xfs_defer_pending *dfp; |
| |
| trace_xfs_defer_trans_abort(tp, _RET_IP_); |
| |
| /* Abort intent items that don't have a done item. */ |
| list_for_each_entry(dfp, dop_pending, dfp_list) { |
| trace_xfs_defer_pending_abort(tp->t_mountp, dfp); |
| if (dfp->dfp_intent && !dfp->dfp_done) { |
| dfp->dfp_type->abort_intent(dfp->dfp_intent); |
| dfp->dfp_intent = NULL; |
| } |
| } |
| } |
| |
| /* Roll a transaction so we can do some deferred op processing. */ |
| STATIC int |
| xfs_defer_trans_roll( |
| struct xfs_trans **tpp) |
| { |
| struct xfs_trans *tp = *tpp; |
| struct xfs_buf_log_item *bli; |
| struct xfs_inode_log_item *ili; |
| struct xfs_log_item *lip; |
| struct xfs_buf *bplist[XFS_DEFER_OPS_NR_BUFS]; |
| struct xfs_inode *iplist[XFS_DEFER_OPS_NR_INODES]; |
| int bpcount = 0, ipcount = 0; |
| int i; |
| int error; |
| |
| list_for_each_entry(lip, &tp->t_items, li_trans) { |
| switch (lip->li_type) { |
| case XFS_LI_BUF: |
| bli = container_of(lip, struct xfs_buf_log_item, |
| bli_item); |
| if (bli->bli_flags & XFS_BLI_HOLD) { |
| if (bpcount >= XFS_DEFER_OPS_NR_BUFS) { |
| ASSERT(0); |
| return -EFSCORRUPTED; |
| } |
| xfs_trans_dirty_buf(tp, bli->bli_buf); |
| bplist[bpcount++] = bli->bli_buf; |
| } |
| break; |
| case XFS_LI_INODE: |
| ili = container_of(lip, struct xfs_inode_log_item, |
| ili_item); |
| if (ili->ili_lock_flags == 0) { |
| if (ipcount >= XFS_DEFER_OPS_NR_INODES) { |
| ASSERT(0); |
| return -EFSCORRUPTED; |
| } |
| xfs_trans_log_inode(tp, ili->ili_inode, |
| XFS_ILOG_CORE); |
| iplist[ipcount++] = ili->ili_inode; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| trace_xfs_defer_trans_roll(tp, _RET_IP_); |
| |
| /* |
| * Roll the transaction. Rolling always given a new transaction (even |
| * if committing the old one fails!) to hand back to the caller, so we |
| * join the held resources to the new transaction so that we always |
| * return with the held resources joined to @tpp, no matter what |
| * happened. |
| */ |
| error = xfs_trans_roll(tpp); |
| tp = *tpp; |
| |
| /* Rejoin the joined inodes. */ |
| for (i = 0; i < ipcount; i++) |
| xfs_trans_ijoin(tp, iplist[i], 0); |
| |
| /* Rejoin the buffers and dirty them so the log moves forward. */ |
| for (i = 0; i < bpcount; i++) { |
| xfs_trans_bjoin(tp, bplist[i]); |
| xfs_trans_bhold(tp, bplist[i]); |
| } |
| |
| if (error) |
| trace_xfs_defer_trans_roll_error(tp, error); |
| return error; |
| } |
| |
| /* |
| * Reset an already used dfops after finish. |
| */ |
| static void |
| xfs_defer_reset( |
| struct xfs_trans *tp) |
| { |
| ASSERT(list_empty(&tp->t_dfops)); |
| |
| /* |
| * Low mode state transfers across transaction rolls to mirror dfops |
| * lifetime. Clear it now that dfops is reset. |
| */ |
| tp->t_flags &= ~XFS_TRANS_LOWMODE; |
| } |
| |
| /* |
| * Free up any items left in the list. |
| */ |
| static void |
| xfs_defer_cancel_list( |
| struct xfs_mount *mp, |
| struct list_head *dop_list) |
| { |
| struct xfs_defer_pending *dfp; |
| struct xfs_defer_pending *pli; |
| struct list_head *pwi; |
| struct list_head *n; |
| |
| /* |
| * Free the pending items. Caller should already have arranged |
| * for the intent items to be released. |
| */ |
| list_for_each_entry_safe(dfp, pli, dop_list, dfp_list) { |
| trace_xfs_defer_cancel_list(mp, dfp); |
| list_del(&dfp->dfp_list); |
| list_for_each_safe(pwi, n, &dfp->dfp_work) { |
| list_del(pwi); |
| dfp->dfp_count--; |
| dfp->dfp_type->cancel_item(pwi); |
| } |
| ASSERT(dfp->dfp_count == 0); |
| kmem_free(dfp); |
| } |
| } |
| |
| /* |
| * Finish all the pending work. This involves logging intent items for |
| * any work items that wandered in since the last transaction roll (if |
| * one has even happened), rolling the transaction, and finishing the |
| * work items in the first item on the logged-and-pending list. |
| * |
| * If an inode is provided, relog it to the new transaction. |
| */ |
| int |
| xfs_defer_finish_noroll( |
| struct xfs_trans **tp) |
| { |
| struct xfs_defer_pending *dfp; |
| struct list_head *li; |
| struct list_head *n; |
| void *state; |
| int error = 0; |
| void (*cleanup_fn)(struct xfs_trans *, void *, int); |
| LIST_HEAD(dop_pending); |
| |
| ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES); |
| |
| trace_xfs_defer_finish(*tp, _RET_IP_); |
| |
| /* Until we run out of pending work to finish... */ |
| while (!list_empty(&dop_pending) || !list_empty(&(*tp)->t_dfops)) { |
| /* log intents and pull in intake items */ |
| xfs_defer_create_intents(*tp); |
| list_splice_tail_init(&(*tp)->t_dfops, &dop_pending); |
| |
| /* |
| * Roll the transaction. |
| */ |
| error = xfs_defer_trans_roll(tp); |
| if (error) |
| goto out; |
| |
| /* Log an intent-done item for the first pending item. */ |
| dfp = list_first_entry(&dop_pending, struct xfs_defer_pending, |
| dfp_list); |
| trace_xfs_defer_pending_finish((*tp)->t_mountp, dfp); |
| dfp->dfp_done = dfp->dfp_type->create_done(*tp, dfp->dfp_intent, |
| dfp->dfp_count); |
| cleanup_fn = dfp->dfp_type->finish_cleanup; |
| |
| /* Finish the work items. */ |
| state = NULL; |
| list_for_each_safe(li, n, &dfp->dfp_work) { |
| list_del(li); |
| dfp->dfp_count--; |
| error = dfp->dfp_type->finish_item(*tp, li, |
| dfp->dfp_done, &state); |
| if (error == -EAGAIN) { |
| /* |
| * Caller wants a fresh transaction; |
| * put the work item back on the list |
| * and jump out. |
| */ |
| list_add(li, &dfp->dfp_work); |
| dfp->dfp_count++; |
| break; |
| } else if (error) { |
| /* |
| * Clean up after ourselves and jump out. |
| * xfs_defer_cancel will take care of freeing |
| * all these lists and stuff. |
| */ |
| if (cleanup_fn) |
| cleanup_fn(*tp, state, error); |
| goto out; |
| } |
| } |
| if (error == -EAGAIN) { |
| /* |
| * Caller wants a fresh transaction, so log a |
| * new log intent item to replace the old one |
| * and roll the transaction. See "Requesting |
| * a Fresh Transaction while Finishing |
| * Deferred Work" above. |
| */ |
| dfp->dfp_intent = dfp->dfp_type->create_intent(*tp, |
| dfp->dfp_count); |
| dfp->dfp_done = NULL; |
| list_for_each(li, &dfp->dfp_work) |
| dfp->dfp_type->log_item(*tp, dfp->dfp_intent, |
| li); |
| } else { |
| /* Done with the dfp, free it. */ |
| list_del(&dfp->dfp_list); |
| kmem_free(dfp); |
| } |
| |
| if (cleanup_fn) |
| cleanup_fn(*tp, state, error); |
| } |
| |
| out: |
| if (error) { |
| xfs_defer_trans_abort(*tp, &dop_pending); |
| xfs_force_shutdown((*tp)->t_mountp, SHUTDOWN_CORRUPT_INCORE); |
| trace_xfs_defer_finish_error(*tp, error); |
| xfs_defer_cancel_list((*tp)->t_mountp, &dop_pending); |
| xfs_defer_cancel(*tp); |
| return error; |
| } |
| |
| trace_xfs_defer_finish_done(*tp, _RET_IP_); |
| return 0; |
| } |
| |
| int |
| xfs_defer_finish( |
| struct xfs_trans **tp) |
| { |
| int error; |
| |
| /* |
| * Finish and roll the transaction once more to avoid returning to the |
| * caller with a dirty transaction. |
| */ |
| error = xfs_defer_finish_noroll(tp); |
| if (error) |
| return error; |
| if ((*tp)->t_flags & XFS_TRANS_DIRTY) { |
| error = xfs_defer_trans_roll(tp); |
| if (error) { |
| xfs_force_shutdown((*tp)->t_mountp, |
| SHUTDOWN_CORRUPT_INCORE); |
| return error; |
| } |
| } |
| xfs_defer_reset(*tp); |
| return 0; |
| } |
| |
| void |
| xfs_defer_cancel( |
| struct xfs_trans *tp) |
| { |
| struct xfs_mount *mp = tp->t_mountp; |
| |
| trace_xfs_defer_cancel(tp, _RET_IP_); |
| xfs_defer_cancel_list(mp, &tp->t_dfops); |
| } |
| |
| /* Add an item for later deferred processing. */ |
| void |
| xfs_defer_add( |
| struct xfs_trans *tp, |
| enum xfs_defer_ops_type type, |
| struct list_head *li) |
| { |
| struct xfs_defer_pending *dfp = NULL; |
| |
| ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES); |
| |
| /* |
| * Add the item to a pending item at the end of the intake list. |
| * If the last pending item has the same type, reuse it. Else, |
| * create a new pending item at the end of the intake list. |
| */ |
| if (!list_empty(&tp->t_dfops)) { |
| dfp = list_last_entry(&tp->t_dfops, |
| struct xfs_defer_pending, dfp_list); |
| if (dfp->dfp_type->type != type || |
| (dfp->dfp_type->max_items && |
| dfp->dfp_count >= dfp->dfp_type->max_items)) |
| dfp = NULL; |
| } |
| if (!dfp) { |
| dfp = kmem_alloc(sizeof(struct xfs_defer_pending), |
| KM_SLEEP | KM_NOFS); |
| dfp->dfp_type = defer_op_types[type]; |
| dfp->dfp_intent = NULL; |
| dfp->dfp_done = NULL; |
| dfp->dfp_count = 0; |
| INIT_LIST_HEAD(&dfp->dfp_work); |
| list_add_tail(&dfp->dfp_list, &tp->t_dfops); |
| } |
| |
| list_add_tail(li, &dfp->dfp_work); |
| dfp->dfp_count++; |
| } |
| |
| /* Initialize a deferred operation list. */ |
| void |
| xfs_defer_init_op_type( |
| const struct xfs_defer_op_type *type) |
| { |
| defer_op_types[type->type] = type; |
| } |
| |
| /* |
| * Move deferred ops from one transaction to another and reset the source to |
| * initial state. This is primarily used to carry state forward across |
| * transaction rolls with pending dfops. |
| */ |
| void |
| xfs_defer_move( |
| struct xfs_trans *dtp, |
| struct xfs_trans *stp) |
| { |
| list_splice_init(&stp->t_dfops, &dtp->t_dfops); |
| |
| /* |
| * Low free space mode was historically controlled by a dfops field. |
| * This meant that low mode state potentially carried across multiple |
| * transaction rolls. Transfer low mode on a dfops move to preserve |
| * that behavior. |
| */ |
| dtp->t_flags |= (stp->t_flags & XFS_TRANS_LOWMODE); |
| |
| xfs_defer_reset(stp); |
| } |