drivers/net/ethernet/freescale/xgmac_mdio.c - linux-mtk - Git at Google

 /*
  * QorIQ 10G MDIO Controller
  *
  * Copyright 2012 Freescale Semiconductor, Inc.
  *
  * Authors: Andy Fleming <afleming@freescale.com>
  *          Timur Tabi <timur@freescale.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */

 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/mdio.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/of_mdio.h>

 /* Number of microseconds to wait for a register to respond */
 #define TIMEOUT	1000

 struct tgec_mdio_controller {
 	__be32	reserved[12];
 	__be32	mdio_stat;	/* MDIO configuration and status */
 	__be32	mdio_ctl;	/* MDIO control */
 	__be32	mdio_data;	/* MDIO data */
 	__be32	mdio_addr;	/* MDIO address */
 } __packed;

 #define MDIO_STAT_ENC		BIT(6)
 #define MDIO_STAT_CLKDIV(x)	(((x>>1) & 0xff) << 8)
 #define MDIO_STAT_BSY		BIT(0)
 #define MDIO_STAT_RD_ER		BIT(1)
 #define MDIO_CTL_DEV_ADDR(x) 	(x & 0x1f)
 #define MDIO_CTL_PORT_ADDR(x)	((x & 0x1f) << 5)
 #define MDIO_CTL_PRE_DIS	BIT(10)
 #define MDIO_CTL_SCAN_EN	BIT(11)
 #define MDIO_CTL_POST_INC	BIT(14)
 #define MDIO_CTL_READ		BIT(15)

 #define MDIO_DATA(x)		(x & 0xffff)
 #define MDIO_DATA_BSY		BIT(31)

 /*
  * Wait until the MDIO bus is free
  */
 static int xgmac_wait_until_free(struct device *dev,
 				 struct tgec_mdio_controller __iomem *regs)
 {
 	uint32_t status;

 	/* Wait till the bus is free */
 	status = spin_event_timeout(
 		!((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY), TIMEOUT, 0);
 	if (!status) {
 		dev_err(dev, "timeout waiting for bus to be free\n");
 		return -ETIMEDOUT;
 	}

 	return 0;
 }

 /*
  * Wait till the MDIO read or write operation is complete
  */
 static int xgmac_wait_until_done(struct device *dev,
 				 struct tgec_mdio_controller __iomem *regs)
 {
 	uint32_t status;

 	/* Wait till the MDIO write is complete */
 	status = spin_event_timeout(
 		!((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY), TIMEOUT, 0);
 	if (!status) {
 		dev_err(dev, "timeout waiting for operation to complete\n");
 		return -ETIMEDOUT;
 	}

 	return 0;
 }

 /*
  * Write value to the PHY for this device to the register at regnum,waiting
  * until the write is done before it returns.  All PHY configuration has to be
  * done through the TSEC1 MIIM regs.
  */
 static int xgmac_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value)
 {
 	struct tgec_mdio_controller __iomem *regs = bus->priv;
 	uint16_t dev_addr;
 	u32 mdio_ctl, mdio_stat;
 	int ret;

 	mdio_stat = in_be32(&regs->mdio_stat);
 	if (regnum & MII_ADDR_C45) {
 		/* Clause 45 (ie 10G) */
 		dev_addr = (regnum >> 16) & 0x1f;
 		mdio_stat |= MDIO_STAT_ENC;
 	} else {
 		/* Clause 22 (ie 1G) */
 		dev_addr = regnum & 0x1f;
 		mdio_stat &= ~MDIO_STAT_ENC;
 	}

 	out_be32(&regs->mdio_stat, mdio_stat);

 	ret = xgmac_wait_until_free(&bus->dev, regs);
 	if (ret)
 		return ret;

 	/* Set the port and dev addr */
 	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
 	out_be32(&regs->mdio_ctl, mdio_ctl);

 	/* Set the register address */
 	if (regnum & MII_ADDR_C45) {
 		out_be32(&regs->mdio_addr, regnum & 0xffff);

 		ret = xgmac_wait_until_free(&bus->dev, regs);
 		if (ret)
 			return ret;
 	}

 	/* Write the value to the register */
 	out_be32(&regs->mdio_data, MDIO_DATA(value));

 	ret = xgmac_wait_until_done(&bus->dev, regs);
 	if (ret)
 		return ret;

 	return 0;
 }

 /*
  * Reads from register regnum in the PHY for device dev, returning the value.
  * Clears miimcom first.  All PHY configuration has to be done through the
  * TSEC1 MIIM regs.
  */
 static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 {
 	struct tgec_mdio_controller __iomem *regs = bus->priv;
 	uint16_t dev_addr;
 	uint32_t mdio_stat;
 	uint32_t mdio_ctl;
 	uint16_t value;
 	int ret;

 	mdio_stat = in_be32(&regs->mdio_stat);
 	if (regnum & MII_ADDR_C45) {
 		dev_addr = (regnum >> 16) & 0x1f;
 		mdio_stat |= MDIO_STAT_ENC;
 	} else {
 		dev_addr = regnum & 0x1f;
 		mdio_stat &= ~MDIO_STAT_ENC;
 	}

 	out_be32(&regs->mdio_stat, mdio_stat);

 	ret = xgmac_wait_until_free(&bus->dev, regs);
 	if (ret)
 		return ret;

 	/* Set the Port and Device Addrs */
 	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
 	out_be32(&regs->mdio_ctl, mdio_ctl);

 	/* Set the register address */
 	if (regnum & MII_ADDR_C45) {
 		out_be32(&regs->mdio_addr, regnum & 0xffff);

 		ret = xgmac_wait_until_free(&bus->dev, regs);
 		if (ret)
 			return ret;
 	}

 	/* Initiate the read */
 	out_be32(&regs->mdio_ctl, mdio_ctl | MDIO_CTL_READ);

 	ret = xgmac_wait_until_done(&bus->dev, regs);
 	if (ret)
 		return ret;

 	/* Return all Fs if nothing was there */
 	if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER) {
 		dev_err(&bus->dev,
 			"Error while reading PHY%d reg at %d.%hhu\n",
 			phy_id, dev_addr, regnum);
 		return 0xffff;
 	}

 	value = in_be32(&regs->mdio_data) & 0xffff;
 	dev_dbg(&bus->dev, "read %04x\n", value);

 	return value;
 }

 static int xgmac_mdio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct mii_bus *bus;
 	struct resource res;
 	int ret;

 	ret = of_address_to_resource(np, 0, &res);
 	if (ret) {
 		dev_err(&pdev->dev, "could not obtain address\n");
 		return ret;
 	}

 	bus = mdiobus_alloc();
 	if (!bus)
 		return -ENOMEM;

 	bus->name = "Freescale XGMAC MDIO Bus";
 	bus->read = xgmac_mdio_read;
 	bus->write = xgmac_mdio_write;
 	bus->parent = &pdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%llx", (unsigned long long)res.start);

 	/* Set the PHY base address */
 	bus->priv = of_iomap(np, 0);
 	if (!bus->priv) {
 		ret = -ENOMEM;
 		goto err_ioremap;
 	}

 	ret = of_mdiobus_register(bus, np);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");
 		goto err_registration;
 	}

 	platform_set_drvdata(pdev, bus);

 	return 0;

 err_registration:
 	iounmap(bus->priv);

 err_ioremap:
 	mdiobus_free(bus);

 	return ret;
 }

 static int xgmac_mdio_remove(struct platform_device *pdev)
 {
 	struct mii_bus *bus = platform_get_drvdata(pdev);

 	mdiobus_unregister(bus);
 	iounmap(bus->priv);
 	mdiobus_free(bus);

 	return 0;
 }

 static struct of_device_id xgmac_mdio_match[] = {
 	{
 		.compatible = "fsl,fman-xmdio",
 	},
 	{
 		.compatible = "fsl,fman-memac-mdio",
 	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, xgmac_mdio_match);

 static struct platform_driver xgmac_mdio_driver = {
 	.driver = {
 		.name = "fsl-fman_xmdio",
 		.of_match_table = xgmac_mdio_match,
 	},
 	.probe = xgmac_mdio_probe,
 	.remove = xgmac_mdio_remove,
 };

 module_platform_driver(xgmac_mdio_driver);

 MODULE_DESCRIPTION("Freescale QorIQ 10G MDIO Controller");
 MODULE_LICENSE("GPL v2");
	/*
	* QorIQ 10G MDIO Controller
	*
	* Copyright 2012 Freescale Semiconductor, Inc.
	*
	* Authors: Andy Fleming <afleming@freescale.com>
	* Timur Tabi <timur@freescale.com>
	*
	* This file is licensed under the terms of the GNU General Public License
	* version 2. This program is licensed "as is" without any warranty of any
	* kind, whether express or implied.
	*/

	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <linux/interrupt.h>
	#include <linux/module.h>
	#include <linux/phy.h>
	#include <linux/mdio.h>
	#include <linux/of_address.h>
	#include <linux/of_platform.h>
	#include <linux/of_mdio.h>

	/* Number of microseconds to wait for a register to respond */
	#define TIMEOUT 1000

	struct tgec_mdio_controller {
	__be32 reserved[12];
	__be32 mdio_stat; /* MDIO configuration and status */
	__be32 mdio_ctl; /* MDIO control */
	__be32 mdio_data; /* MDIO data */
	__be32 mdio_addr; /* MDIO address */
	} __packed;

	#define MDIO_STAT_ENC BIT(6)
	#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8)
	#define MDIO_STAT_BSY BIT(0)
	#define MDIO_STAT_RD_ER BIT(1)
	#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
	#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
	#define MDIO_CTL_PRE_DIS BIT(10)
	#define MDIO_CTL_SCAN_EN BIT(11)
	#define MDIO_CTL_POST_INC BIT(14)
	#define MDIO_CTL_READ BIT(15)

	#define MDIO_DATA(x) (x & 0xffff)
	#define MDIO_DATA_BSY BIT(31)

	/*
	* Wait until the MDIO bus is free
	*/
	static int xgmac_wait_until_free(struct device *dev,
	struct tgec_mdio_controller __iomem *regs)
	{
	uint32_t status;

	/* Wait till the bus is free */
	status = spin_event_timeout(
	!((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY), TIMEOUT, 0);
	if (!status) {
	dev_err(dev, "timeout waiting for bus to be free\n");
	return -ETIMEDOUT;
	}

	return 0;
	}

	/*
	* Wait till the MDIO read or write operation is complete
	*/
	static int xgmac_wait_until_done(struct device *dev,
	struct tgec_mdio_controller __iomem *regs)
	{
	uint32_t status;

	/* Wait till the MDIO write is complete */
	status = spin_event_timeout(
	!((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY), TIMEOUT, 0);
	if (!status) {
	dev_err(dev, "timeout waiting for operation to complete\n");
	return -ETIMEDOUT;
	}

	return 0;
	}

	/*
	* Write value to the PHY for this device to the register at regnum,waiting
	* until the write is done before it returns. All PHY configuration has to be
	* done through the TSEC1 MIIM regs.
	*/
	static int xgmac_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value)
	{
	struct tgec_mdio_controller __iomem *regs = bus->priv;
	uint16_t dev_addr;
	u32 mdio_ctl, mdio_stat;
	int ret;

	mdio_stat = in_be32(&regs->mdio_stat);
	if (regnum & MII_ADDR_C45) {
	/* Clause 45 (ie 10G) */
	dev_addr = (regnum >> 16) & 0x1f;
	mdio_stat \|= MDIO_STAT_ENC;
	} else {
	/* Clause 22 (ie 1G) */
	dev_addr = regnum & 0x1f;
	mdio_stat &= ~MDIO_STAT_ENC;
	}

	out_be32(&regs->mdio_stat, mdio_stat);

	ret = xgmac_wait_until_free(&bus->dev, regs);
	if (ret)
	return ret;

	/* Set the port and dev addr */
	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) \| MDIO_CTL_DEV_ADDR(dev_addr);
	out_be32(&regs->mdio_ctl, mdio_ctl);

	/* Set the register address */
	if (regnum & MII_ADDR_C45) {
	out_be32(&regs->mdio_addr, regnum & 0xffff);

	ret = xgmac_wait_until_free(&bus->dev, regs);
	if (ret)
	return ret;
	}

	/* Write the value to the register */
	out_be32(&regs->mdio_data, MDIO_DATA(value));

	ret = xgmac_wait_until_done(&bus->dev, regs);
	if (ret)
	return ret;

	return 0;
	}

	/*
	* Reads from register regnum in the PHY for device dev, returning the value.
	* Clears miimcom first. All PHY configuration has to be done through the
	* TSEC1 MIIM regs.
	*/
	static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
	{
	struct tgec_mdio_controller __iomem *regs = bus->priv;
	uint16_t dev_addr;
	uint32_t mdio_stat;
	uint32_t mdio_ctl;
	uint16_t value;
	int ret;

	mdio_stat = in_be32(&regs->mdio_stat);
	if (regnum & MII_ADDR_C45) {
	dev_addr = (regnum >> 16) & 0x1f;
	mdio_stat \|= MDIO_STAT_ENC;
	} else {
	dev_addr = regnum & 0x1f;
	mdio_stat &= ~MDIO_STAT_ENC;
	}

	out_be32(&regs->mdio_stat, mdio_stat);

	ret = xgmac_wait_until_free(&bus->dev, regs);
	if (ret)
	return ret;

	/* Set the Port and Device Addrs */
	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) \| MDIO_CTL_DEV_ADDR(dev_addr);
	out_be32(&regs->mdio_ctl, mdio_ctl);

	/* Set the register address */
	if (regnum & MII_ADDR_C45) {
	out_be32(&regs->mdio_addr, regnum & 0xffff);

	ret = xgmac_wait_until_free(&bus->dev, regs);
	if (ret)
	return ret;
	}

	/* Initiate the read */
	out_be32(&regs->mdio_ctl, mdio_ctl \| MDIO_CTL_READ);

	ret = xgmac_wait_until_done(&bus->dev, regs);
	if (ret)
	return ret;

	/* Return all Fs if nothing was there */
	if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER) {
	dev_err(&bus->dev,
	"Error while reading PHY%d reg at %d.%hhu\n",
	phy_id, dev_addr, regnum);
	return 0xffff;
	}

	value = in_be32(&regs->mdio_data) & 0xffff;
	dev_dbg(&bus->dev, "read %04x\n", value);

	return value;
	}

	static int xgmac_mdio_probe(struct platform_device *pdev)
	{
	struct device_node *np = pdev->dev.of_node;
	struct mii_bus *bus;
	struct resource res;
	int ret;

	ret = of_address_to_resource(np, 0, &res);
	if (ret) {
	dev_err(&pdev->dev, "could not obtain address\n");
	return ret;
	}

	bus = mdiobus_alloc();
	if (!bus)
	return -ENOMEM;

	bus->name = "Freescale XGMAC MDIO Bus";
	bus->read = xgmac_mdio_read;
	bus->write = xgmac_mdio_write;
	bus->parent = &pdev->dev;
	snprintf(bus->id, MII_BUS_ID_SIZE, "%llx", (unsigned long long)res.start);

	/* Set the PHY base address */
	bus->priv = of_iomap(np, 0);
	if (!bus->priv) {
	ret = -ENOMEM;
	goto err_ioremap;
	}

	ret = of_mdiobus_register(bus, np);
	if (ret) {
	dev_err(&pdev->dev, "cannot register MDIO bus\n");
	goto err_registration;
	}

	platform_set_drvdata(pdev, bus);

	return 0;

	err_registration:
	iounmap(bus->priv);

	err_ioremap:
	mdiobus_free(bus);

	return ret;
	}

	static int xgmac_mdio_remove(struct platform_device *pdev)
	{
	struct mii_bus *bus = platform_get_drvdata(pdev);

	mdiobus_unregister(bus);
	iounmap(bus->priv);
	mdiobus_free(bus);

	return 0;
	}

	static struct of_device_id xgmac_mdio_match[] = {
	{
	.compatible = "fsl,fman-xmdio",
	},
	{
	.compatible = "fsl,fman-memac-mdio",
	},
	{},
	};
	MODULE_DEVICE_TABLE(of, xgmac_mdio_match);

	static struct platform_driver xgmac_mdio_driver = {
	.driver = {
	.name = "fsl-fman_xmdio",
	.of_match_table = xgmac_mdio_match,
	},
	.probe = xgmac_mdio_probe,
	.remove = xgmac_mdio_remove,
	};

	module_platform_driver(xgmac_mdio_driver);

	MODULE_DESCRIPTION("Freescale QorIQ 10G MDIO Controller");
	MODULE_LICENSE("GPL v2");