drivers/net/wireless/ath/ath5k/pci.c - linux-mtk - Git at Google

 /*
  * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #include <linux/nl80211.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
 #include <linux/etherdevice.h>
 #include "../ath.h"
 #include "ath5k.h"
 #include "debug.h"
 #include "base.h"
 #include "reg.h"

 /* Known PCI ids */
 static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
 	{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
 	{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
 	{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
 	{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
 	{ PCI_VDEVICE(3COM_2,  0x0013) }, /* 3com 5212 */
 	{ PCI_VDEVICE(3COM,    0x0013) }, /* 3com 3CRDAG675 5212 */
 	{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
 	{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */
 	{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */
 	{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */
 	{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */
 	{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */
 	{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */
 	{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
 	{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
 	{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
 	{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);

 /* return bus cachesize in 4B word units */
 static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
 {
 	struct ath5k_softc *sc = (struct ath5k_softc *) common->priv;
 	u8 u8tmp;

 	pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
 	*csz = (int)u8tmp;

 	/*
 	 * This check was put in to avoid "unpleasant" consequences if
 	 * the bootrom has not fully initialized all PCI devices.
 	 * Sometimes the cache line size register is not set
 	 */

 	if (*csz == 0)
 		*csz = L1_CACHE_BYTES >> 2;   /* Use the default size */
 }

 /*
  * Read from eeprom
  */
 static bool
 ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
 {
 	struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
 	u32 status, timeout;

 	/*
 	 * Initialize EEPROM access
 	 */
 	if (ah->ah_version == AR5K_AR5210) {
 		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
 		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
 	} else {
 		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
 		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
 				AR5K_EEPROM_CMD_READ);
 	}

 	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
 		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
 		if (status & AR5K_EEPROM_STAT_RDDONE) {
 			if (status & AR5K_EEPROM_STAT_RDERR)
 				return false;
 			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
 					0xffff);
 			return true;
 		}
 		udelay(15);
 	}

 	return false;
 }

 int ath5k_hw_read_srev(struct ath5k_hw *ah)
 {
 	ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
 	return 0;
 }

 /*
  * Read the MAC address from eeprom or platform_data
  */
 static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
 {
 	u8 mac_d[ETH_ALEN] = {};
 	u32 total, offset;
 	u16 data;
 	int octet;

 	AR5K_EEPROM_READ(0x20, data);

 	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
 		AR5K_EEPROM_READ(offset, data);

 		total += data;
 		mac_d[octet + 1] = data & 0xff;
 		mac_d[octet] = data >> 8;
 		octet += 2;
 	}

 	if (!total || total == 3 * 0xffff)
 		return -EINVAL;

 	memcpy(mac, mac_d, ETH_ALEN);

 	return 0;
 }


 /* Common ath_bus_opts structure */
 static const struct ath_bus_ops ath_pci_bus_ops = {
 	.ath_bus_type = ATH_PCI,
 	.read_cachesize = ath5k_pci_read_cachesize,
 	.eeprom_read = ath5k_pci_eeprom_read,
 	.eeprom_read_mac = ath5k_pci_eeprom_read_mac,
 };

 /********************\
 * PCI Initialization *
 \********************/

 static int __devinit
 ath5k_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *id)
 {
 	void __iomem *mem;
 	struct ath5k_softc *sc;
 	struct ieee80211_hw *hw;
 	int ret;
 	u8 csz;

 	/*
 	 * L0s needs to be disabled on all ath5k cards.
 	 *
 	 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
 	 * by default in the future in 2.6.36) this will also mean both L1 and
 	 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
 	 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
 	 * though but cannot currently undue the effect of a blacklist, for
 	 * details you can read pcie_aspm_sanity_check() and see how it adjusts
 	 * the device link capability.
 	 *
 	 * It may be possible in the future to implement some PCI API to allow
 	 * drivers to override blacklists for pre 1.1 PCIe but for now it is
 	 * best to accept that both L0s and L1 will be disabled completely for
 	 * distributions shipping with CONFIG_PCIEASPM rather than having this
 	 * issue present. Motivation for adding this new API will be to help
 	 * with power consumption for some of these devices.
 	 */
 	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);

 	ret = pci_enable_device(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "can't enable device\n");
 		goto err;
 	}

 	/* XXX 32-bit addressing only */
 	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (ret) {
 		dev_err(&pdev->dev, "32-bit DMA not available\n");
 		goto err_dis;
 	}

 	/*
 	 * Cache line size is used to size and align various
 	 * structures used to communicate with the hardware.
 	 */
 	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
 	if (csz == 0) {
 		/*
 		 * Linux 2.4.18 (at least) writes the cache line size
 		 * register as a 16-bit wide register which is wrong.
 		 * We must have this setup properly for rx buffer
 		 * DMA to work so force a reasonable value here if it
 		 * comes up zero.
 		 */
 		csz = L1_CACHE_BYTES >> 2;
 		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
 	}
 	/*
 	 * The default setting of latency timer yields poor results,
 	 * set it to the value used by other systems.  It may be worth
 	 * tweaking this setting more.
 	 */
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);

 	/* Enable bus mastering */
 	pci_set_master(pdev);

 	/*
 	 * Disable the RETRY_TIMEOUT register (0x41) to keep
 	 * PCI Tx retries from interfering with C3 CPU state.
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);

 	ret = pci_request_region(pdev, 0, "ath5k");
 	if (ret) {
 		dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
 		goto err_dis;
 	}

 	mem = pci_iomap(pdev, 0, 0);
 	if (!mem) {
 		dev_err(&pdev->dev, "cannot remap PCI memory region\n");
 		ret = -EIO;
 		goto err_reg;
 	}

 	/*
 	 * Allocate hw (mac80211 main struct)
 	 * and hw->priv (driver private data)
 	 */
 	hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
 	if (hw == NULL) {
 		dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
 		ret = -ENOMEM;
 		goto err_map;
 	}

 	dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));

 	sc = hw->priv;
 	sc->hw = hw;
 	sc->pdev = pdev;
 	sc->dev = &pdev->dev;
 	sc->irq = pdev->irq;
 	sc->devid = id->device;
 	sc->iobase = mem; /* So we can unmap it on detach */

 	/* Initialize */
 	ret = ath5k_init_softc(sc, &ath_pci_bus_ops);
 	if (ret)
 		goto err_free;

 	/* Set private data */
 	pci_set_drvdata(pdev, hw);

 	return 0;
 err_free:
 	ieee80211_free_hw(hw);
 err_map:
 	pci_iounmap(pdev, mem);
 err_reg:
 	pci_release_region(pdev, 0);
 err_dis:
 	pci_disable_device(pdev);
 err:
 	return ret;
 }

 static void __devexit
 ath5k_pci_remove(struct pci_dev *pdev)
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;

 	ath5k_deinit_softc(sc);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
 	ieee80211_free_hw(hw);
 }

 #ifdef CONFIG_PM_SLEEP
 static int ath5k_pci_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;

 	ath5k_led_off(sc);
 	return 0;
 }

 static int ath5k_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;

 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
 	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
 	 * PCI Tx retries from interfering with C3 CPU state
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);

 	ath5k_led_enable(sc);
 	return 0;
 }

 static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
 #define ATH5K_PM_OPS	(&ath5k_pm_ops)
 #else
 #define ATH5K_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP */

 static struct pci_driver ath5k_pci_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= ath5k_pci_id_table,
 	.probe		= ath5k_pci_probe,
 	.remove		= __devexit_p(ath5k_pci_remove),
 	.driver.pm	= ATH5K_PM_OPS,
 };

 /*
  * Module init/exit functions
  */
 static int __init
 init_ath5k_pci(void)
 {
 	int ret;

 	ret = pci_register_driver(&ath5k_pci_driver);
 	if (ret) {
 		printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
 		return ret;
 	}

 	return 0;
 }

 static void __exit
 exit_ath5k_pci(void)
 {
 	pci_unregister_driver(&ath5k_pci_driver);
 }

 module_init(init_ath5k_pci);
 module_exit(exit_ath5k_pci);
	/*
	* Copyright (c) 2008-2009 Atheros Communications Inc.
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#include <linux/nl80211.h>
	#include <linux/pci.h>
	#include <linux/pci-aspm.h>
	#include <linux/etherdevice.h>
	#include "../ath.h"
	#include "ath5k.h"
	#include "debug.h"
	#include "base.h"
	#include "reg.h"

	/* Known PCI ids */
	static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
	{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
	{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
	{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
	{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
	{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
	{ PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
	{ PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
	{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
	{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */
	{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */
	{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */
	{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */
	{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */
	{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */
	{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
	{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
	{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
	{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
	{ 0 }
	};
	MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);

	/* return bus cachesize in 4B word units */
	static void ath5k_pci_read_cachesize(struct ath_common common, int csz)
	{
	struct ath5k_softc sc = (struct ath5k_softc ) common->priv;
	u8 u8tmp;

	pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
	*csz = (int)u8tmp;

	/*
	* This check was put in to avoid "unpleasant" consequences if
	* the bootrom has not fully initialized all PCI devices.
	* Sometimes the cache line size register is not set
	*/

	if (*csz == 0)
	csz = L1_CACHE_BYTES >> 2; / Use the default size */
	}

	/*
	* Read from eeprom
	*/
	static bool
	ath5k_pci_eeprom_read(struct ath_common common, u32 offset, u16 data)
	{
	struct ath5k_hw ah = (struct ath5k_hw ) common->ah;
	u32 status, timeout;

	/*
	* Initialize EEPROM access
	*/
	if (ah->ah_version == AR5K_AR5210) {
	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
	(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
	} else {
	ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
	AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
	AR5K_EEPROM_CMD_READ);
	}

	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
	status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
	if (status & AR5K_EEPROM_STAT_RDDONE) {
	if (status & AR5K_EEPROM_STAT_RDERR)
	return false;
	*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
	0xffff);
	return true;
	}
	udelay(15);
	}

	return false;
	}

	int ath5k_hw_read_srev(struct ath5k_hw *ah)
	{
	ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
	return 0;
	}

	/*
	* Read the MAC address from eeprom or platform_data
	*/
	static int ath5k_pci_eeprom_read_mac(struct ath5k_hw ah, u8 mac)
	{
	u8 mac_d[ETH_ALEN] = {};
	u32 total, offset;
	u16 data;
	int octet;

	AR5K_EEPROM_READ(0x20, data);

	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
	AR5K_EEPROM_READ(offset, data);

	total += data;
	mac_d[octet + 1] = data & 0xff;
	mac_d[octet] = data >> 8;
	octet += 2;
	}

	if (!total \|\| total == 3 * 0xffff)
	return -EINVAL;

	memcpy(mac, mac_d, ETH_ALEN);

	return 0;
	}


	/* Common ath_bus_opts structure */
	static const struct ath_bus_ops ath_pci_bus_ops = {
	.ath_bus_type = ATH_PCI,
	.read_cachesize = ath5k_pci_read_cachesize,
	.eeprom_read = ath5k_pci_eeprom_read,
	.eeprom_read_mac = ath5k_pci_eeprom_read_mac,
	};

	/********************\
	* PCI Initialization *
	\********************/

	static int __devinit
	ath5k_pci_probe(struct pci_dev *pdev,
	const struct pci_device_id *id)
	{
	void __iomem *mem;
	struct ath5k_softc *sc;
	struct ieee80211_hw *hw;
	int ret;
	u8 csz;

	/*
	* L0s needs to be disabled on all ath5k cards.
	*
	* For distributions shipping with CONFIG_PCIEASPM (this will be enabled
	* by default in the future in 2.6.36) this will also mean both L1 and
	* L0s will be disabled when a pre 1.1 PCIe device is detected. We do
	* know L1 works correctly even for all ath5k pre 1.1 PCIe devices
	* though but cannot currently undue the effect of a blacklist, for
	* details you can read pcie_aspm_sanity_check() and see how it adjusts
	* the device link capability.
	*
	* It may be possible in the future to implement some PCI API to allow
	* drivers to override blacklists for pre 1.1 PCIe but for now it is
	* best to accept that both L0s and L1 will be disabled completely for
	* distributions shipping with CONFIG_PCIEASPM rather than having this
	* issue present. Motivation for adding this new API will be to help
	* with power consumption for some of these devices.
	*/
	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);

	ret = pci_enable_device(pdev);
	if (ret) {
	dev_err(&pdev->dev, "can't enable device\n");
	goto err;
	}

	/* XXX 32-bit addressing only */
	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
	if (ret) {
	dev_err(&pdev->dev, "32-bit DMA not available\n");
	goto err_dis;
	}

	/*
	* Cache line size is used to size and align various
	* structures used to communicate with the hardware.
	*/
	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
	if (csz == 0) {
	/*
	* Linux 2.4.18 (at least) writes the cache line size
	* register as a 16-bit wide register which is wrong.
	* We must have this setup properly for rx buffer
	* DMA to work so force a reasonable value here if it
	* comes up zero.
	*/
	csz = L1_CACHE_BYTES >> 2;
	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
	}
	/*
	* The default setting of latency timer yields poor results,
	* set it to the value used by other systems. It may be worth
	* tweaking this setting more.
	*/
	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);

	/* Enable bus mastering */
	pci_set_master(pdev);

	/*
	* Disable the RETRY_TIMEOUT register (0x41) to keep
	* PCI Tx retries from interfering with C3 CPU state.
	*/
	pci_write_config_byte(pdev, 0x41, 0);

	ret = pci_request_region(pdev, 0, "ath5k");
	if (ret) {
	dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
	goto err_dis;
	}

	mem = pci_iomap(pdev, 0, 0);
	if (!mem) {
	dev_err(&pdev->dev, "cannot remap PCI memory region\n");
	ret = -EIO;
	goto err_reg;
	}

	/*
	* Allocate hw (mac80211 main struct)
	* and hw->priv (driver private data)
	*/
	hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
	if (hw == NULL) {
	dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
	ret = -ENOMEM;
	goto err_map;
	}

	dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));

	sc = hw->priv;
	sc->hw = hw;
	sc->pdev = pdev;
	sc->dev = &pdev->dev;
	sc->irq = pdev->irq;
	sc->devid = id->device;
	sc->iobase = mem; /* So we can unmap it on detach */

	/* Initialize */
	ret = ath5k_init_softc(sc, &ath_pci_bus_ops);
	if (ret)
	goto err_free;

	/* Set private data */
	pci_set_drvdata(pdev, hw);

	return 0;
	err_free:
	ieee80211_free_hw(hw);
	err_map:
	pci_iounmap(pdev, mem);
	err_reg:
	pci_release_region(pdev, 0);
	err_dis:
	pci_disable_device(pdev);
	err:
	return ret;
	}

	static void __devexit
	ath5k_pci_remove(struct pci_dev *pdev)
	{
	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
	struct ath5k_softc *sc = hw->priv;

	ath5k_deinit_softc(sc);
	pci_iounmap(pdev, sc->iobase);
	pci_release_region(pdev, 0);
	pci_disable_device(pdev);
	ieee80211_free_hw(hw);
	}

	#ifdef CONFIG_PM_SLEEP
	static int ath5k_pci_suspend(struct device *dev)
	{
	struct pci_dev *pdev = to_pci_dev(dev);
	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
	struct ath5k_softc *sc = hw->priv;

	ath5k_led_off(sc);
	return 0;
	}

	static int ath5k_pci_resume(struct device *dev)
	{
	struct pci_dev *pdev = to_pci_dev(dev);
	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
	struct ath5k_softc *sc = hw->priv;

	/*
	* Suspend/Resume resets the PCI configuration space, so we have to
	* re-disable the RETRY_TIMEOUT register (0x41) to keep
	* PCI Tx retries from interfering with C3 CPU state
	*/
	pci_write_config_byte(pdev, 0x41, 0);

	ath5k_led_enable(sc);
	return 0;
	}

	static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
	#define ATH5K_PM_OPS (&ath5k_pm_ops)
	#else
	#define ATH5K_PM_OPS NULL
	#endif /* CONFIG_PM_SLEEP */

	static struct pci_driver ath5k_pci_driver = {
	.name = KBUILD_MODNAME,
	.id_table = ath5k_pci_id_table,
	.probe = ath5k_pci_probe,
	.remove = __devexit_p(ath5k_pci_remove),
	.driver.pm = ATH5K_PM_OPS,
	};

	/*
	* Module init/exit functions
	*/
	static int __init
	init_ath5k_pci(void)
	{
	int ret;

	ret = pci_register_driver(&ath5k_pci_driver);
	if (ret) {
	printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
	return ret;
	}

	return 0;
	}

	static void __exit
	exit_ath5k_pci(void)
	{
	pci_unregister_driver(&ath5k_pci_driver);
	}

	module_init(init_ath5k_pci);
	module_exit(exit_ath5k_pci);