| /* |
| * ST1232 Touchscreen Controller Driver |
| * |
| * Copyright (C) 2010 Renesas Solutions Corp. |
| * Tony SIM <chinyeow.sim.xt@renesas.com> |
| * |
| * Using code from: |
| * - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c |
| * Copyright (C) 2007 Google, Inc. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/pm_qos.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| |
| #define ST1232_TS_NAME "st1232-ts" |
| |
| #define MIN_X 0x00 |
| #define MIN_Y 0x00 |
| #define MAX_X 0x31f /* (800 - 1) */ |
| #define MAX_Y 0x1df /* (480 - 1) */ |
| #define MAX_AREA 0xff |
| #define MAX_FINGERS 2 |
| |
| struct st1232_ts_finger { |
| u16 x; |
| u16 y; |
| u8 t; |
| bool is_valid; |
| }; |
| |
| struct st1232_ts_data { |
| struct i2c_client *client; |
| struct input_dev *input_dev; |
| struct st1232_ts_finger finger[MAX_FINGERS]; |
| struct dev_pm_qos_request low_latency_req; |
| int reset_gpio; |
| }; |
| |
| static int st1232_ts_read_data(struct st1232_ts_data *ts) |
| { |
| struct st1232_ts_finger *finger = ts->finger; |
| struct i2c_client *client = ts->client; |
| struct i2c_msg msg[2]; |
| int error; |
| u8 start_reg; |
| u8 buf[10]; |
| |
| /* read touchscreen data from ST1232 */ |
| msg[0].addr = client->addr; |
| msg[0].flags = 0; |
| msg[0].len = 1; |
| msg[0].buf = &start_reg; |
| start_reg = 0x10; |
| |
| msg[1].addr = ts->client->addr; |
| msg[1].flags = I2C_M_RD; |
| msg[1].len = sizeof(buf); |
| msg[1].buf = buf; |
| |
| error = i2c_transfer(client->adapter, msg, 2); |
| if (error < 0) |
| return error; |
| |
| /* get "valid" bits */ |
| finger[0].is_valid = buf[2] >> 7; |
| finger[1].is_valid = buf[5] >> 7; |
| |
| /* get xy coordinate */ |
| if (finger[0].is_valid) { |
| finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3]; |
| finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4]; |
| finger[0].t = buf[8]; |
| } |
| |
| if (finger[1].is_valid) { |
| finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6]; |
| finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7]; |
| finger[1].t = buf[9]; |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) |
| { |
| struct st1232_ts_data *ts = dev_id; |
| struct st1232_ts_finger *finger = ts->finger; |
| struct input_dev *input_dev = ts->input_dev; |
| int count = 0; |
| int i, ret; |
| |
| ret = st1232_ts_read_data(ts); |
| if (ret < 0) |
| goto end; |
| |
| /* multi touch protocol */ |
| for (i = 0; i < MAX_FINGERS; i++) { |
| if (!finger[i].is_valid) |
| continue; |
| |
| input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t); |
| input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x); |
| input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y); |
| input_mt_sync(input_dev); |
| count++; |
| } |
| |
| /* SYN_MT_REPORT only if no contact */ |
| if (!count) { |
| input_mt_sync(input_dev); |
| if (ts->low_latency_req.dev) { |
| dev_pm_qos_remove_request(&ts->low_latency_req); |
| ts->low_latency_req.dev = NULL; |
| } |
| } else if (!ts->low_latency_req.dev) { |
| /* First contact, request 100 us latency. */ |
| dev_pm_qos_add_ancestor_request(&ts->client->dev, |
| &ts->low_latency_req, |
| DEV_PM_QOS_RESUME_LATENCY, 100); |
| } |
| |
| /* SYN_REPORT */ |
| input_sync(input_dev); |
| |
| end: |
| return IRQ_HANDLED; |
| } |
| |
| static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) |
| { |
| if (gpio_is_valid(ts->reset_gpio)) |
| gpio_direction_output(ts->reset_gpio, poweron); |
| } |
| |
| static int st1232_ts_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct st1232_ts_data *ts; |
| struct input_dev *input_dev; |
| int error; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "need I2C_FUNC_I2C\n"); |
| return -EIO; |
| } |
| |
| if (!client->irq) { |
| dev_err(&client->dev, "no IRQ?\n"); |
| return -EINVAL; |
| } |
| |
| ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL); |
| if (!ts) |
| return -ENOMEM; |
| |
| input_dev = devm_input_allocate_device(&client->dev); |
| if (!input_dev) |
| return -ENOMEM; |
| |
| ts->client = client; |
| ts->input_dev = input_dev; |
| |
| ts->reset_gpio = of_get_gpio(client->dev.of_node, 0); |
| if (gpio_is_valid(ts->reset_gpio)) { |
| error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL); |
| if (error) { |
| dev_err(&client->dev, |
| "Unable to request GPIO pin %d.\n", |
| ts->reset_gpio); |
| return error; |
| } |
| } |
| |
| st1232_ts_power(ts, true); |
| |
| input_dev->name = "st1232-touchscreen"; |
| input_dev->id.bustype = BUS_I2C; |
| input_dev->dev.parent = &client->dev; |
| |
| __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); |
| __set_bit(EV_SYN, input_dev->evbit); |
| __set_bit(EV_KEY, input_dev->evbit); |
| __set_bit(EV_ABS, input_dev->evbit); |
| |
| input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0); |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, st1232_ts_irq_handler, |
| IRQF_ONESHOT, |
| client->name, ts); |
| if (error) { |
| dev_err(&client->dev, "Failed to register interrupt\n"); |
| return error; |
| } |
| |
| error = input_register_device(ts->input_dev); |
| if (error) { |
| dev_err(&client->dev, "Unable to register %s input device\n", |
| input_dev->name); |
| return error; |
| } |
| |
| i2c_set_clientdata(client, ts); |
| device_init_wakeup(&client->dev, 1); |
| |
| return 0; |
| } |
| |
| static int st1232_ts_remove(struct i2c_client *client) |
| { |
| struct st1232_ts_data *ts = i2c_get_clientdata(client); |
| |
| st1232_ts_power(ts, false); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused st1232_ts_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct st1232_ts_data *ts = i2c_get_clientdata(client); |
| |
| if (device_may_wakeup(&client->dev)) { |
| enable_irq_wake(client->irq); |
| } else { |
| disable_irq(client->irq); |
| st1232_ts_power(ts, false); |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused st1232_ts_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct st1232_ts_data *ts = i2c_get_clientdata(client); |
| |
| if (device_may_wakeup(&client->dev)) { |
| disable_irq_wake(client->irq); |
| } else { |
| st1232_ts_power(ts, true); |
| enable_irq(client->irq); |
| } |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops, |
| st1232_ts_suspend, st1232_ts_resume); |
| |
| static const struct i2c_device_id st1232_ts_id[] = { |
| { ST1232_TS_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, st1232_ts_id); |
| |
| static const struct of_device_id st1232_ts_dt_ids[] = { |
| { .compatible = "sitronix,st1232", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids); |
| |
| static struct i2c_driver st1232_ts_driver = { |
| .probe = st1232_ts_probe, |
| .remove = st1232_ts_remove, |
| .id_table = st1232_ts_id, |
| .driver = { |
| .name = ST1232_TS_NAME, |
| .of_match_table = st1232_ts_dt_ids, |
| .pm = &st1232_ts_pm_ops, |
| }, |
| }; |
| |
| module_i2c_driver(st1232_ts_driver); |
| |
| MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>"); |
| MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); |
| MODULE_LICENSE("GPL"); |