| /* |
| * arch/arm/mach-ks8695/time.c |
| * |
| * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> |
| * Copyright (C) 2006 Simtec Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/io.h> |
| #include <linux/clockchips.h> |
| |
| #include <asm/mach/time.h> |
| #include <asm/system_misc.h> |
| |
| #include <mach/regs-irq.h> |
| |
| #include "generic.h" |
| |
| #define KS8695_TMR_OFFSET (0xF0000 + 0xE400) |
| #define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) |
| #define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) |
| |
| /* |
| * Timer registers |
| */ |
| #define KS8695_TMCON (0x00) /* Timer Control Register */ |
| #define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ |
| #define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ |
| #define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ |
| #define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ |
| |
| /* Timer Control Register */ |
| #define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ |
| #define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ |
| |
| /* Timer0 Timeout Counter Register */ |
| #define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ |
| |
| static int ks8695_set_periodic(struct clock_event_device *evt) |
| { |
| u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); |
| u32 half = DIV_ROUND_CLOSEST(rate, 2); |
| u32 tmcon; |
| |
| /* Disable timer 1 */ |
| tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); |
| tmcon &= ~TMCON_T1EN; |
| writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); |
| |
| /* Both registers need to count down */ |
| writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); |
| writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); |
| |
| /* Re-enable timer1 */ |
| tmcon |= TMCON_T1EN; |
| writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); |
| return 0; |
| } |
| |
| static int ks8695_set_next_event(unsigned long cycles, |
| struct clock_event_device *evt) |
| |
| { |
| u32 half = DIV_ROUND_CLOSEST(cycles, 2); |
| u32 tmcon; |
| |
| /* Disable timer 1 */ |
| tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); |
| tmcon &= ~TMCON_T1EN; |
| writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); |
| |
| /* Both registers need to count down */ |
| writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); |
| writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); |
| |
| /* Re-enable timer1 */ |
| tmcon |= TMCON_T1EN; |
| writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); |
| |
| return 0; |
| } |
| |
| static struct clock_event_device clockevent_ks8695 = { |
| .name = "ks8695_t1tc", |
| /* Reasonably fast and accurate clock event */ |
| .rating = 300, |
| .features = CLOCK_EVT_FEAT_ONESHOT | |
| CLOCK_EVT_FEAT_PERIODIC, |
| .set_next_event = ks8695_set_next_event, |
| .set_state_periodic = ks8695_set_periodic, |
| }; |
| |
| /* |
| * IRQ handler for the timer. |
| */ |
| static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = &clockevent_ks8695; |
| |
| evt->event_handler(evt); |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction ks8695_timer_irq = { |
| .name = "ks8695_tick", |
| .flags = IRQF_TIMER, |
| .handler = ks8695_timer_interrupt, |
| }; |
| |
| static void ks8695_timer_setup(void) |
| { |
| unsigned long tmcon; |
| |
| /* Disable timer 0 and 1 */ |
| tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); |
| tmcon &= ~TMCON_T0EN; |
| tmcon &= ~TMCON_T1EN; |
| writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); |
| |
| /* |
| * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles |
| * (one on each counter) maximum 2*2^32, but the API will only |
| * accept up to a 32bit full word (0xFFFFFFFFU). |
| */ |
| clockevents_config_and_register(&clockevent_ks8695, |
| KS8695_CLOCK_RATE, 2, |
| 0xFFFFFFFFU); |
| } |
| |
| void __init ks8695_timer_init(void) |
| { |
| ks8695_timer_setup(); |
| |
| /* Enable timer interrupts */ |
| setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq); |
| } |
| |
| void ks8695_restart(enum reboot_mode reboot_mode, const char *cmd) |
| { |
| unsigned int reg; |
| |
| if (reboot_mode == REBOOT_SOFT) |
| soft_restart(0); |
| |
| /* disable timer0 */ |
| reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); |
| writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); |
| |
| /* enable watchdog mode */ |
| writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); |
| |
| /* re-enable timer0 */ |
| writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); |
| } |