Documentation/kbuild/kconfig.txt - linux-mtk - Git at Google

 This file contains some assistance for using "make *config".

 Use "make help" to list all of the possible configuration targets.

 The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf')
 programs also have embedded help text.  Be sure to check that for
 navigation, search, and other general help text.

 ======================================================================
 General
 --------------------------------------------------

 New kernel releases often introduce new config symbols.  Often more
 important, new kernel releases may rename config symbols.  When
 this happens, using a previously working .config file and running
 "make oldconfig" won't necessarily produce a working new kernel
 for you, so you may find that you need to see what NEW kernel
 symbols have been introduced.

 To see a list of new config symbols, use

 	cp user/some/old.config .config
 	make listnewconfig

 and the config program will list any new symbols, one per line.

 Alternatively, you can use the brute force method:

 	make oldconfig
 	scripts/diffconfig .config.old .config | less

 ______________________________________________________________________
 Environment variables for '*config'

 KCONFIG_CONFIG
 --------------------------------------------------
 This environment variable can be used to specify a default kernel config
 file name to override the default name of ".config".

 KCONFIG_OVERWRITECONFIG
 --------------------------------------------------
 If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
 break symlinks when .config is a symlink to somewhere else.

 CONFIG_
 --------------------------------------------------
 If you set CONFIG_ in the environment, Kconfig will prefix all symbols
 with its value when saving the configuration, instead of using the default,
 "CONFIG_".

 ______________________________________________________________________
 Environment variables for '{allyes/allmod/allno/rand}config'

 KCONFIG_ALLCONFIG
 --------------------------------------------------
 (partially based on lkml email from/by Rob Landley, re: miniconfig)
 --------------------------------------------------
 The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also
 use the environment variable KCONFIG_ALLCONFIG as a flag or a filename
 that contains config symbols that the user requires to be set to a
 specific value.  If KCONFIG_ALLCONFIG is used without a filename where
 KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", "make *config"
 checks for a file named "all{yes/mod/no/def/random}.config"
 (corresponding to the *config command that was used) for symbol values
 that are to be forced.  If this file is not found, it checks for a
 file named "all.config" to contain forced values.

 This enables you to create "miniature" config (miniconfig) or custom
 config files containing just the config symbols that you are interested
 in.  Then the kernel config system generates the full .config file,
 including symbols of your miniconfig file.

 This 'KCONFIG_ALLCONFIG' file is a config file which contains
 (usually a subset of all) preset config symbols.  These variable
 settings are still subject to normal dependency checks.

 Examples:
 	KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig
 or
 	KCONFIG_ALLCONFIG=mini.config make allnoconfig
 or
 	make KCONFIG_ALLCONFIG=mini.config allnoconfig

 These examples will disable most options (allnoconfig) but enable or
 disable the options that are explicitly listed in the specified
 mini-config files.

 ______________________________________________________________________
 Environment variables for 'randconfig'

 KCONFIG_SEED
 --------------------------------------------------
 You can set this to the integer value used to seed the RNG, if you want
 to somehow debug the behaviour of the kconfig parser/frontends.
 If not set, the current time will be used.

 KCONFIG_PROBABILITY
 --------------------------------------------------
 This variable can be used to skew the probabilities. This variable can
 be unset or empty, or set to three different formats:
 	KCONFIG_PROBABILITY     y:n split           y:m:n split
 	-----------------------------------------------------------------
 	unset or empty          50  : 50            33  : 33  : 34
 	N                        N  : 100-N         N/2 : N/2 : 100-N
     [1] N:M                     N+M : 100-(N+M)      N  :  M  : 100-(N+M)
     [2] N:M:L                    N  : 100-N          M  :  L  : 100-(M+L)

 where N, M and L are integers (in base 10) in the range [0,100], and so
 that:
     [1] N+M is in the range [0,100]
     [2] M+L is in the range [0,100]

 Examples:
 	KCONFIG_PROBABILITY=10
 		10% of booleans will be set to 'y', 90% to 'n'
 		5% of tristates will be set to 'y', 5% to 'm', 90% to 'n'
 	KCONFIG_PROBABILITY=15:25
 		40% of booleans will be set to 'y', 60% to 'n'
 		15% of tristates will be set to 'y', 25% to 'm', 60% to 'n'
 	KCONFIG_PROBABILITY=10:15:15
 		10% of booleans will be set to 'y', 90% to 'n'
 		15% of tristates will be set to 'y', 15% to 'm', 70% to 'n'

 ______________________________________________________________________
 Environment variables for 'syncconfig'

 KCONFIG_NOSILENTUPDATE
 --------------------------------------------------
 If this variable has a non-blank value, it prevents silent kernel
 config updates (requires explicit updates).

 KCONFIG_AUTOCONFIG
 --------------------------------------------------
 This environment variable can be set to specify the path & name of the
 "auto.conf" file.  Its default value is "include/config/auto.conf".

 KCONFIG_TRISTATE
 --------------------------------------------------
 This environment variable can be set to specify the path & name of the
 "tristate.conf" file.  Its default value is "include/config/tristate.conf".

 KCONFIG_AUTOHEADER
 --------------------------------------------------
 This environment variable can be set to specify the path & name of the
 "autoconf.h" (header) file.
 Its default value is "include/generated/autoconf.h".


 ======================================================================
 menuconfig
 --------------------------------------------------

 SEARCHING for CONFIG symbols

 Searching in menuconfig:

 	The Search function searches for kernel configuration symbol
 	names, so you have to know something close to what you are
 	looking for.

 	Example:
 		/hotplug
 		This lists all config symbols that contain "hotplug",
 		e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.

 	For search help, enter / followed by TAB-TAB (to highlight
 	<Help>) and Enter.  This will tell you that you can also use
 	regular expressions (regexes) in the search string, so if you
 	are not interested in MEMORY_HOTPLUG, you could try

 		/^hotplug

 	When searching, symbols are sorted thus:
 	  - first, exact matches, sorted alphabetically (an exact match
 	    is when the search matches the complete symbol name);
 	  - then, other matches, sorted alphabetically.
 	For example: ^ATH.K matches:
 	    ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG
 	    [...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...]
 	of which only ATH5K and ATH9K match exactly and so are sorted
 	first (and in alphabetical order), then come all other symbols,
 	sorted in alphabetical order.

 ______________________________________________________________________
 User interface options for 'menuconfig'

 MENUCONFIG_COLOR
 --------------------------------------------------
 It is possible to select different color themes using the variable
 MENUCONFIG_COLOR.  To select a theme use:

 	make MENUCONFIG_COLOR=<theme> menuconfig

 Available themes are:
   mono       => selects colors suitable for monochrome displays
   blackbg    => selects a color scheme with black background
   classic    => theme with blue background. The classic look
   bluetitle  => a LCD friendly version of classic. (default)

 MENUCONFIG_MODE
 --------------------------------------------------
 This mode shows all sub-menus in one large tree.

 Example:
 	make MENUCONFIG_MODE=single_menu menuconfig


 ======================================================================
 nconfig
 --------------------------------------------------

 nconfig is an alternate text-based configurator.  It lists function
 keys across the bottom of the terminal (window) that execute commands.
 You can also just use the corresponding numeric key to execute the
 commands unless you are in a data entry window.  E.g., instead of F6
 for Save, you can just press 6.

 Use F1 for Global help or F3 for the Short help menu.

 Searching in nconfig:

 	You can search either in the menu entry "prompt" strings
 	or in the configuration symbols.

 	Use / to begin a search through the menu entries.  This does
 	not support regular expressions.  Use <Down> or <Up> for
 	Next hit and Previous hit, respectively.  Use <Esc> to
 	terminate the search mode.

 	F8 (SymSearch) searches the configuration symbols for the
 	given string or regular expression (regex).

 NCONFIG_MODE
 --------------------------------------------------
 This mode shows all sub-menus in one large tree.

 Example:
 	make NCONFIG_MODE=single_menu nconfig


 ======================================================================
 xconfig
 --------------------------------------------------

 Searching in xconfig:

 	The Search function searches for kernel configuration symbol
 	names, so you have to know something close to what you are
 	looking for.

 	Example:
 		Ctrl-F hotplug
 	or
 		Menu: File, Search, hotplug

 	lists all config symbol entries that contain "hotplug" in
 	the symbol name.  In this Search dialog, you may change the
 	config setting for any of the entries that are not grayed out.
 	You can also enter a different search string without having
 	to return to the main menu.


 ======================================================================
 gconfig
 --------------------------------------------------

 Searching in gconfig:

 	There is no search command in gconfig.  However, gconfig does
 	have several different viewing choices, modes, and options.

 ###
	This file contains some assistance for using "make *config".

	Use "make help" to list all of the possible configuration targets.

	The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf')
	programs also have embedded help text. Be sure to check that for
	navigation, search, and other general help text.

	======================================================================
	General
	--------------------------------------------------

	New kernel releases often introduce new config symbols. Often more
	important, new kernel releases may rename config symbols. When
	this happens, using a previously working .config file and running
	"make oldconfig" won't necessarily produce a working new kernel
	for you, so you may find that you need to see what NEW kernel
	symbols have been introduced.

	To see a list of new config symbols, use

	cp user/some/old.config .config
	make listnewconfig

	and the config program will list any new symbols, one per line.

	Alternatively, you can use the brute force method:

	make oldconfig
	scripts/diffconfig .config.old .config \| less

	______________________________________________________________________
	Environment variables for '*config'

	KCONFIG_CONFIG
	--------------------------------------------------
	This environment variable can be used to specify a default kernel config
	file name to override the default name of ".config".

	KCONFIG_OVERWRITECONFIG
	--------------------------------------------------
	If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
	break symlinks when .config is a symlink to somewhere else.

	CONFIG_
	--------------------------------------------------
	If you set CONFIG_ in the environment, Kconfig will prefix all symbols
	with its value when saving the configuration, instead of using the default,
	"CONFIG_".

	______________________________________________________________________
	Environment variables for '{allyes/allmod/allno/rand}config'

	KCONFIG_ALLCONFIG
	--------------------------------------------------
	(partially based on lkml email from/by Rob Landley, re: miniconfig)
	--------------------------------------------------
	The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also
	use the environment variable KCONFIG_ALLCONFIG as a flag or a filename
	that contains config symbols that the user requires to be set to a
	specific value. If KCONFIG_ALLCONFIG is used without a filename where
	KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", "make *config"
	checks for a file named "all{yes/mod/no/def/random}.config"
	(corresponding to the *config command that was used) for symbol values
	that are to be forced. If this file is not found, it checks for a
	file named "all.config" to contain forced values.

	This enables you to create "miniature" config (miniconfig) or custom
	config files containing just the config symbols that you are interested
	in. Then the kernel config system generates the full .config file,
	including symbols of your miniconfig file.

	This 'KCONFIG_ALLCONFIG' file is a config file which contains
	(usually a subset of all) preset config symbols. These variable
	settings are still subject to normal dependency checks.

	Examples:
	KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig
	or
	KCONFIG_ALLCONFIG=mini.config make allnoconfig
	or
	make KCONFIG_ALLCONFIG=mini.config allnoconfig

	These examples will disable most options (allnoconfig) but enable or
	disable the options that are explicitly listed in the specified
	mini-config files.

	______________________________________________________________________
	Environment variables for 'randconfig'

	KCONFIG_SEED
	--------------------------------------------------
	You can set this to the integer value used to seed the RNG, if you want
	to somehow debug the behaviour of the kconfig parser/frontends.
	If not set, the current time will be used.

	KCONFIG_PROBABILITY
	--------------------------------------------------
	This variable can be used to skew the probabilities. This variable can
	be unset or empty, or set to three different formats:
	KCONFIG_PROBABILITY y:n split y:m:n split
	-----------------------------------------------------------------
	unset or empty 50 : 50 33 : 33 : 34
	N N : 100-N N/2 : N/2 : 100-N
	[1] N:M N+M : 100-(N+M) N : M : 100-(N+M)
	[2] N:M:L N : 100-N M : L : 100-(M+L)

	where N, M and L are integers (in base 10) in the range [0,100], and so
	that:
	[1] N+M is in the range [0,100]
	[2] M+L is in the range [0,100]

	Examples:
	KCONFIG_PROBABILITY=10
	10% of booleans will be set to 'y', 90% to 'n'
	5% of tristates will be set to 'y', 5% to 'm', 90% to 'n'
	KCONFIG_PROBABILITY=15:25
	40% of booleans will be set to 'y', 60% to 'n'
	15% of tristates will be set to 'y', 25% to 'm', 60% to 'n'
	KCONFIG_PROBABILITY=10:15:15
	10% of booleans will be set to 'y', 90% to 'n'
	15% of tristates will be set to 'y', 15% to 'm', 70% to 'n'

	______________________________________________________________________
	Environment variables for 'syncconfig'

	KCONFIG_NOSILENTUPDATE
	--------------------------------------------------
	If this variable has a non-blank value, it prevents silent kernel
	config updates (requires explicit updates).

	KCONFIG_AUTOCONFIG
	--------------------------------------------------
	This environment variable can be set to specify the path & name of the
	"auto.conf" file. Its default value is "include/config/auto.conf".

	KCONFIG_TRISTATE
	--------------------------------------------------
	This environment variable can be set to specify the path & name of the
	"tristate.conf" file. Its default value is "include/config/tristate.conf".

	KCONFIG_AUTOHEADER
	--------------------------------------------------
	This environment variable can be set to specify the path & name of the
	"autoconf.h" (header) file.
	Its default value is "include/generated/autoconf.h".


	======================================================================
	menuconfig
	--------------------------------------------------

	SEARCHING for CONFIG symbols

	Searching in menuconfig:

	The Search function searches for kernel configuration symbol
	names, so you have to know something close to what you are
	looking for.

	Example:
	/hotplug
	This lists all config symbols that contain "hotplug",
	e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.

	For search help, enter / followed by TAB-TAB (to highlight
	<Help>) and Enter. This will tell you that you can also use
	regular expressions (regexes) in the search string, so if you
	are not interested in MEMORY_HOTPLUG, you could try

	/^hotplug

	When searching, symbols are sorted thus:
	- first, exact matches, sorted alphabetically (an exact match
	is when the search matches the complete symbol name);
	- then, other matches, sorted alphabetically.
	For example: ^ATH.K matches:
	ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG
	[...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...]
	of which only ATH5K and ATH9K match exactly and so are sorted
	first (and in alphabetical order), then come all other symbols,
	sorted in alphabetical order.

	______________________________________________________________________
	User interface options for 'menuconfig'

	MENUCONFIG_COLOR
	--------------------------------------------------
	It is possible to select different color themes using the variable
	MENUCONFIG_COLOR. To select a theme use:

	make MENUCONFIG_COLOR=<theme> menuconfig

	Available themes are:
	mono => selects colors suitable for monochrome displays
	blackbg => selects a color scheme with black background
	classic => theme with blue background. The classic look
	bluetitle => a LCD friendly version of classic. (default)

	MENUCONFIG_MODE
	--------------------------------------------------
	This mode shows all sub-menus in one large tree.

	Example:
	make MENUCONFIG_MODE=single_menu menuconfig


	======================================================================
	nconfig
	--------------------------------------------------

	nconfig is an alternate text-based configurator. It lists function
	keys across the bottom of the terminal (window) that execute commands.
	You can also just use the corresponding numeric key to execute the
	commands unless you are in a data entry window. E.g., instead of F6
	for Save, you can just press 6.

	Use F1 for Global help or F3 for the Short help menu.

	Searching in nconfig:

	You can search either in the menu entry "prompt" strings
	or in the configuration symbols.

	Use / to begin a search through the menu entries. This does
	not support regular expressions. Use <Down> or <Up> for
	Next hit and Previous hit, respectively. Use <Esc> to
	terminate the search mode.

	F8 (SymSearch) searches the configuration symbols for the
	given string or regular expression (regex).

	NCONFIG_MODE
	--------------------------------------------------
	This mode shows all sub-menus in one large tree.

	Example:
	make NCONFIG_MODE=single_menu nconfig


	======================================================================
	xconfig
	--------------------------------------------------

	Searching in xconfig:

	The Search function searches for kernel configuration symbol
	names, so you have to know something close to what you are
	looking for.

	Example:
	Ctrl-F hotplug
	or
	Menu: File, Search, hotplug

	lists all config symbol entries that contain "hotplug" in
	the symbol name. In this Search dialog, you may change the
	config setting for any of the entries that are not grayed out.
	You can also enter a different search string without having
	to return to the main menu.


	======================================================================
	gconfig
	--------------------------------------------------

	Searching in gconfig:

	There is no search command in gconfig. However, gconfig does
	have several different viewing choices, modes, and options.

	###