| /* | |
| * OLPC HGPK (XO-1) touchpad PS/2 mouse driver | |
| * | |
| * Copyright (c) 2006-2008 One Laptop Per Child | |
| * Authors: | |
| * Zephaniah E. Hull | |
| * Andres Salomon <dilinger@debian.org> | |
| * | |
| * This driver is partly based on the ALPS driver, which is: | |
| * | |
| * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au> | |
| * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com> | |
| * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru> | |
| * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| /* | |
| * The spec from ALPS is available from | |
| * <http://wiki.laptop.org/go/Touch_Pad/Tablet>. It refers to this | |
| * device as HGPK (Hybrid GS, PT, and Keymatrix). | |
| * | |
| * The earliest versions of the device had simultaneous reporting; that | |
| * was removed. After that, the device used the Advanced Mode GS/PT streaming | |
| * stuff. That turned out to be too buggy to support, so we've finally | |
| * switched to Mouse Mode (which utilizes only the center 1/3 of the touchpad). | |
| */ | |
| #define DEBUG | |
| #include <linux/input.h> | |
| #include <linux/serio.h> | |
| #include <linux/libps2.h> | |
| #include <linux/delay.h> | |
| #include <asm/olpc.h> | |
| #include "psmouse.h" | |
| #include "hgpk.h" | |
| static int tpdebug; | |
| module_param(tpdebug, int, 0644); | |
| MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG."); | |
| static int recalib_delta = 100; | |
| module_param(recalib_delta, int, 0644); | |
| MODULE_PARM_DESC(recalib_delta, | |
| "packets containing a delta this large will cause a recalibration."); | |
| /* | |
| * When the touchpad gets ultra-sensitive, one can keep their finger 1/2" | |
| * above the pad and still have it send packets. This causes a jump cursor | |
| * when one places their finger on the pad. We can probably detect the | |
| * jump as we see a large deltas (>= 100px). In mouse mode, I've been | |
| * unable to even come close to 100px deltas during normal usage, so I think | |
| * this threshold is safe. If a large delta occurs, trigger a recalibration. | |
| */ | |
| static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y) | |
| { | |
| struct hgpk_data *priv = psmouse->private; | |
| if (abs(x) > recalib_delta || abs(y) > recalib_delta) { | |
| hgpk_err(psmouse, ">%dpx jump detected (%d,%d)\n", | |
| recalib_delta, x, y); | |
| /* My car gets forty rods to the hogshead and that's the | |
| * way I likes it! */ | |
| psmouse_queue_work(psmouse, &priv->recalib_wq, | |
| msecs_to_jiffies(1000)); | |
| } | |
| } | |
| /* | |
| * We have no idea why this particular hardware bug occurs. The touchpad | |
| * will randomly start spewing packets without anything touching the | |
| * pad. This wouldn't necessarily be bad, but it's indicative of a | |
| * severely miscalibrated pad; attempting to use the touchpad while it's | |
| * spewing means the cursor will jump all over the place, and act "drunk". | |
| * | |
| * The packets that are spewed tend to all have deltas between -2 and 2, and | |
| * the cursor will move around without really going very far. It will | |
| * tend to end up in the same location; if we tally up the changes over | |
| * 100 packets, we end up w/ a final delta of close to 0. This happens | |
| * pretty regularly when the touchpad is spewing, and is pretty hard to | |
| * manually trigger (at least for *my* fingers). So, it makes a perfect | |
| * scheme for detecting spews. | |
| */ | |
| static void hgpk_spewing_hack(struct psmouse *psmouse, | |
| int l, int r, int x, int y) | |
| { | |
| struct hgpk_data *priv = psmouse->private; | |
| /* ignore button press packets; many in a row could trigger | |
| * a false-positive! */ | |
| if (l || r) | |
| return; | |
| priv->x_tally += x; | |
| priv->y_tally += y; | |
| if (++priv->count > 100) { | |
| if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) { | |
| hgpk_dbg(psmouse, "packet spew detected (%d,%d)\n", | |
| priv->x_tally, priv->y_tally); | |
| psmouse_queue_work(psmouse, &priv->recalib_wq, | |
| msecs_to_jiffies(1000)); | |
| } | |
| /* reset every 100 packets */ | |
| priv->count = 0; | |
| priv->x_tally = 0; | |
| priv->y_tally = 0; | |
| } | |
| } | |
| /* | |
| * HGPK Mouse Mode format (standard mouse format, sans middle button) | |
| * | |
| * byte 0: y-over x-over y-neg x-neg 1 0 swr swl | |
| * byte 1: x7 x6 x5 x4 x3 x2 x1 x0 | |
| * byte 2: y7 y6 y5 y4 y3 y2 y1 y0 | |
| * | |
| * swr/swl are the left/right buttons. | |
| * x-neg/y-neg are the x and y delta negative bits | |
| * x-over/y-over are the x and y overflow bits | |
| */ | |
| static int hgpk_validate_byte(unsigned char *packet) | |
| { | |
| return (packet[0] & 0x0C) != 0x08; | |
| } | |
| static void hgpk_process_packet(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| unsigned char *packet = psmouse->packet; | |
| int x, y, left, right; | |
| left = packet[0] & 1; | |
| right = (packet[0] >> 1) & 1; | |
| x = packet[1] - ((packet[0] << 4) & 0x100); | |
| y = ((packet[0] << 3) & 0x100) - packet[2]; | |
| hgpk_jumpy_hack(psmouse, x, y); | |
| hgpk_spewing_hack(psmouse, left, right, x, y); | |
| if (tpdebug) | |
| hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); | |
| input_report_key(dev, BTN_LEFT, left); | |
| input_report_key(dev, BTN_RIGHT, right); | |
| input_report_rel(dev, REL_X, x); | |
| input_report_rel(dev, REL_Y, y); | |
| input_sync(dev); | |
| } | |
| static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse) | |
| { | |
| struct hgpk_data *priv = psmouse->private; | |
| if (hgpk_validate_byte(psmouse->packet)) { | |
| hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x\n", | |
| __func__, psmouse->pktcnt, psmouse->packet[0], | |
| psmouse->packet[1], psmouse->packet[2]); | |
| return PSMOUSE_BAD_DATA; | |
| } | |
| if (psmouse->pktcnt >= psmouse->pktsize) { | |
| hgpk_process_packet(psmouse); | |
| return PSMOUSE_FULL_PACKET; | |
| } | |
| if (priv->recalib_window) { | |
| if (time_before(jiffies, priv->recalib_window)) { | |
| /* | |
| * ugh, got a packet inside our recalibration | |
| * window, schedule another recalibration. | |
| */ | |
| hgpk_dbg(psmouse, | |
| "packet inside calibration window, " | |
| "queueing another recalibration\n"); | |
| psmouse_queue_work(psmouse, &priv->recalib_wq, | |
| msecs_to_jiffies(1000)); | |
| } | |
| priv->recalib_window = 0; | |
| } | |
| return PSMOUSE_GOOD_DATA; | |
| } | |
| static int hgpk_force_recalibrate(struct psmouse *psmouse) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| struct hgpk_data *priv = psmouse->private; | |
| /* C-series touchpads added the recalibrate command */ | |
| if (psmouse->model < HGPK_MODEL_C) | |
| return 0; | |
| /* we don't want to race with the irq handler, nor with resyncs */ | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| /* start by resetting the device */ | |
| psmouse_reset(psmouse); | |
| /* send the recalibrate request */ | |
| if (ps2_command(ps2dev, NULL, 0xf5) || | |
| ps2_command(ps2dev, NULL, 0xf5) || | |
| ps2_command(ps2dev, NULL, 0xe6) || | |
| ps2_command(ps2dev, NULL, 0xf5)) { | |
| return -1; | |
| } | |
| /* according to ALPS, 150mS is required for recalibration */ | |
| msleep(150); | |
| /* XXX: If a finger is down during this delay, recalibration will | |
| * detect capacitance incorrectly. This is a hardware bug, and | |
| * we don't have a good way to deal with it. The 2s window stuff | |
| * (below) is our best option for now. | |
| */ | |
| if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) | |
| return -1; | |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); | |
| /* After we recalibrate, we shouldn't get any packets for 2s. If | |
| * we do, it's likely that someone's finger was on the touchpad. | |
| * If someone's finger *was* on the touchpad, it's probably | |
| * miscalibrated. So, we should schedule another recalibration | |
| */ | |
| priv->recalib_window = jiffies + msecs_to_jiffies(2000); | |
| return 0; | |
| } | |
| /* | |
| * This kills power to the touchpad; according to ALPS, current consumption | |
| * goes down to 50uA after running this. To turn power back on, we drive | |
| * MS-DAT low. | |
| */ | |
| static int hgpk_toggle_power(struct psmouse *psmouse, int enable) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| int timeo; | |
| /* Added on D-series touchpads */ | |
| if (psmouse->model < HGPK_MODEL_D) | |
| return 0; | |
| if (enable) { | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| /* | |
| * Sending a byte will drive MS-DAT low; this will wake up | |
| * the controller. Once we get an ACK back from it, it | |
| * means we can continue with the touchpad re-init. ALPS | |
| * tells us that 1s should be long enough, so set that as | |
| * the upper bound. | |
| */ | |
| for (timeo = 20; timeo > 0; timeo--) { | |
| if (!ps2_sendbyte(&psmouse->ps2dev, | |
| PSMOUSE_CMD_DISABLE, 20)) | |
| break; | |
| msleep(50); | |
| } | |
| psmouse_reset(psmouse); | |
| /* should be all set, enable the touchpad */ | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); | |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); | |
| } else { | |
| hgpk_dbg(psmouse, "Powering off touchpad.\n"); | |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| if (ps2_command(ps2dev, NULL, 0xec) || | |
| ps2_command(ps2dev, NULL, 0xec) || | |
| ps2_command(ps2dev, NULL, 0xea)) { | |
| return -1; | |
| } | |
| /* probably won't see an ACK, the touchpad will be off */ | |
| ps2_sendbyte(&psmouse->ps2dev, 0xec, 20); | |
| } | |
| return 0; | |
| } | |
| static int hgpk_poll(struct psmouse *psmouse) | |
| { | |
| /* We can't poll, so always return failure. */ | |
| return -1; | |
| } | |
| static int hgpk_reconnect(struct psmouse *psmouse) | |
| { | |
| /* During suspend/resume the ps2 rails remain powered. We don't want | |
| * to do a reset because it's flush data out of buffers; however, | |
| * earlier prototypes (B1) had some brokenness that required a reset. */ | |
| if (olpc_board_at_least(olpc_board(0xb2))) | |
| if (psmouse->ps2dev.serio->dev.power.power_state.event != | |
| PM_EVENT_ON) | |
| return 0; | |
| psmouse_reset(psmouse); | |
| return 0; | |
| } | |
| static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf) | |
| { | |
| struct hgpk_data *priv = psmouse->private; | |
| return sprintf(buf, "%d\n", priv->powered); | |
| } | |
| static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, | |
| const char *buf, size_t count) | |
| { | |
| struct hgpk_data *priv = psmouse->private; | |
| unsigned long value; | |
| int err; | |
| err = strict_strtoul(buf, 10, &value); | |
| if (err || value > 1) | |
| return -EINVAL; | |
| if (value != priv->powered) { | |
| /* | |
| * hgpk_toggle_power will deal w/ state so | |
| * we're not racing w/ irq | |
| */ | |
| err = hgpk_toggle_power(psmouse, value); | |
| if (!err) | |
| priv->powered = value; | |
| } | |
| return err ? err : count; | |
| } | |
| __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL, | |
| hgpk_show_powered, hgpk_set_powered, 0); | |
| static void hgpk_disconnect(struct psmouse *psmouse) | |
| { | |
| struct hgpk_data *priv = psmouse->private; | |
| device_remove_file(&psmouse->ps2dev.serio->dev, | |
| &psmouse_attr_powered.dattr); | |
| psmouse_reset(psmouse); | |
| kfree(priv); | |
| } | |
| static void hgpk_recalib_work(struct work_struct *work) | |
| { | |
| struct delayed_work *w = container_of(work, struct delayed_work, work); | |
| struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq); | |
| struct psmouse *psmouse = priv->psmouse; | |
| hgpk_dbg(psmouse, "recalibrating touchpad..\n"); | |
| if (hgpk_force_recalibrate(psmouse)) | |
| hgpk_err(psmouse, "recalibration failed!\n"); | |
| } | |
| static int hgpk_register(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| int err; | |
| /* unset the things that psmouse-base sets which we don't have */ | |
| __clear_bit(BTN_MIDDLE, dev->keybit); | |
| /* set the things we do have */ | |
| __set_bit(EV_KEY, dev->evbit); | |
| __set_bit(EV_REL, dev->evbit); | |
| __set_bit(REL_X, dev->relbit); | |
| __set_bit(REL_Y, dev->relbit); | |
| __set_bit(BTN_LEFT, dev->keybit); | |
| __set_bit(BTN_RIGHT, dev->keybit); | |
| /* register handlers */ | |
| psmouse->protocol_handler = hgpk_process_byte; | |
| psmouse->poll = hgpk_poll; | |
| psmouse->disconnect = hgpk_disconnect; | |
| psmouse->reconnect = hgpk_reconnect; | |
| psmouse->pktsize = 3; | |
| /* Disable the idle resync. */ | |
| psmouse->resync_time = 0; | |
| /* Reset after a lot of bad bytes. */ | |
| psmouse->resetafter = 1024; | |
| err = device_create_file(&psmouse->ps2dev.serio->dev, | |
| &psmouse_attr_powered.dattr); | |
| if (err) | |
| hgpk_err(psmouse, "Failed to create sysfs attribute\n"); | |
| return err; | |
| } | |
| int hgpk_init(struct psmouse *psmouse) | |
| { | |
| struct hgpk_data *priv; | |
| int err = -ENOMEM; | |
| priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL); | |
| if (!priv) | |
| goto alloc_fail; | |
| psmouse->private = priv; | |
| priv->psmouse = psmouse; | |
| priv->powered = 1; | |
| INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work); | |
| err = psmouse_reset(psmouse); | |
| if (err) | |
| goto init_fail; | |
| err = hgpk_register(psmouse); | |
| if (err) | |
| goto init_fail; | |
| return 0; | |
| init_fail: | |
| kfree(priv); | |
| alloc_fail: | |
| return err; | |
| } | |
| static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| unsigned char param[3]; | |
| /* E7, E7, E7, E9 gets us a 3 byte identifier */ | |
| if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { | |
| return -EIO; | |
| } | |
| hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]); | |
| /* HGPK signature: 0x67, 0x00, 0x<model> */ | |
| if (param[0] != 0x67 || param[1] != 0x00) | |
| return -ENODEV; | |
| hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); | |
| return param[2]; | |
| } | |
| int hgpk_detect(struct psmouse *psmouse, int set_properties) | |
| { | |
| int version; | |
| version = hgpk_get_model(psmouse); | |
| if (version < 0) | |
| return version; | |
| if (set_properties) { | |
| psmouse->vendor = "ALPS"; | |
| psmouse->name = "HGPK"; | |
| psmouse->model = version; | |
| } | |
| return 0; | |
| } |