| /* |
| * Copyright 2012-2016 Freescale Semiconductor, Inc. |
| * Copyright 2017 NXP |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "ci_hdrc_imx.h" |
| |
| #define MX25_USB_PHY_CTRL_OFFSET 0x08 |
| #define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23) |
| |
| #define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0) |
| #define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0) |
| #define MX25_EHCI_INTERFACE_MASK (0xf) |
| |
| #define MX25_OTG_SIC_SHIFT 29 |
| #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) |
| #define MX25_OTG_PM_BIT BIT(24) |
| #define MX25_OTG_PP_BIT BIT(11) |
| #define MX25_OTG_OCPOL_BIT BIT(3) |
| |
| #define MX25_H1_SIC_SHIFT 21 |
| #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) |
| #define MX25_H1_PP_BIT BIT(18) |
| #define MX25_H1_PM_BIT BIT(16) |
| #define MX25_H1_IPPUE_UP_BIT BIT(7) |
| #define MX25_H1_IPPUE_DOWN_BIT BIT(6) |
| #define MX25_H1_TLL_BIT BIT(5) |
| #define MX25_H1_USBTE_BIT BIT(4) |
| #define MX25_H1_OCPOL_BIT BIT(2) |
| |
| #define MX27_H1_PM_BIT BIT(8) |
| #define MX27_H2_PM_BIT BIT(16) |
| #define MX27_OTG_PM_BIT BIT(24) |
| |
| #define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 |
| #define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c |
| #define MX53_USB_UH2_CTRL_OFFSET 0x14 |
| #define MX53_USB_UH3_CTRL_OFFSET 0x18 |
| #define MX53_BM_OVER_CUR_DIS_H1 BIT(5) |
| #define MX53_BM_OVER_CUR_DIS_OTG BIT(8) |
| #define MX53_BM_OVER_CUR_DIS_UHx BIT(30) |
| #define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3 |
| #define MX53_USB_PLL_DIV_24_MHZ 0x01 |
| |
| #define MX6_BM_NON_BURST_SETTING BIT(1) |
| #define MX6_BM_OVER_CUR_DIS BIT(7) |
| #define MX6_BM_OVER_CUR_POLARITY BIT(8) |
| #define MX6_BM_PRW_POLARITY BIT(9) |
| #define MX6_BM_WAKEUP_ENABLE BIT(10) |
| #define MX6_BM_UTMI_ON_CLOCK BIT(13) |
| #define MX6_BM_ID_WAKEUP BIT(16) |
| #define MX6_BM_VBUS_WAKEUP BIT(17) |
| #define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) |
| #define MX6_BM_WAKEUP_INTR BIT(31) |
| |
| #define MX6_USB_HSIC_CTRL_OFFSET 0x10 |
| /* Send resume signal without 480Mhz PHY clock */ |
| #define MX6SX_BM_HSIC_AUTO_RESUME BIT(23) |
| /* set before portsc.suspendM = 1 */ |
| #define MX6_BM_HSIC_DEV_CONN BIT(21) |
| /* HSIC enable */ |
| #define MX6_BM_HSIC_EN BIT(12) |
| /* Force HSIC module 480M clock on, even when in Host is in suspend mode */ |
| #define MX6_BM_HSIC_CLK_ON BIT(11) |
| |
| #define MX6_USB_OTG1_PHY_CTRL 0x18 |
| /* For imx6dql, it is host-only controller, for later imx6, it is otg's */ |
| #define MX6_USB_OTG2_PHY_CTRL 0x1c |
| #define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8) |
| #define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0) |
| #define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1) |
| #define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2) |
| #define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3) |
| |
| #define VF610_OVER_CUR_DIS BIT(7) |
| |
| #define MX7D_USBNC_USB_CTRL2 0x4 |
| #define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN BIT(8) |
| #define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK (BIT(7) | BIT(6)) |
| #define MX7D_USBNC_USB_CTRL2_OPMODE(v) (v << 6) |
| #define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1) |
| #define MX7D_USBNC_HSIC_AUTO_RESUME BIT(2) |
| |
| #define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK 0x3 |
| #define MX7D_USB_VBUS_WAKEUP_SOURCE(v) (v << 0) |
| #define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS MX7D_USB_VBUS_WAKEUP_SOURCE(0) |
| #define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1) |
| #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2) |
| #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3) |
| #define MX7D_USB_TERMSEL_OVERRIDE BIT(4) |
| #define MX7D_USB_TERMSEL_OVERRIDE_EN BIT(5) |
| |
| #define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB BIT(3) |
| #define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 BIT(2) |
| #define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 BIT(1) |
| #define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL BIT(0) |
| #define MX7D_USB_OTG_PHY_CFG2 0x34 |
| |
| #define MX7D_USB_OTG_PHY_STATUS 0x3c |
| #define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29) |
| #define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3) |
| #define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1 BIT(1) |
| #define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0 BIT(0) |
| |
| #define ANADIG_ANA_MISC0 0x150 |
| #define ANADIG_ANA_MISC0_SET 0x154 |
| #define ANADIG_ANA_MISC0_CLK_DELAY(x) ((x >> 26) & 0x7) |
| |
| #define ANADIG_USB1_CHRG_DETECT_SET 0x1b4 |
| #define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8 |
| #define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20) |
| #define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19) |
| #define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18) |
| |
| #define ANADIG_USB1_VBUS_DET_STAT 0x1c0 |
| #define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) |
| |
| #define ANADIG_USB1_CHRG_DET_STAT 0x1d0 |
| #define ANADIG_USB1_CHRG_DET_STAT_DM_STATE BIT(2) |
| #define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED BIT(1) |
| #define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT BIT(0) |
| |
| struct usbmisc_ops { |
| /* It's called once when probe a usb device */ |
| int (*init)(struct imx_usbmisc_data *data); |
| /* It's called once after adding a usb device */ |
| int (*post)(struct imx_usbmisc_data *data); |
| /* It's called when we need to enable/disable usb wakeup */ |
| int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); |
| /* usb charger contact and primary detection */ |
| int (*charger_primary_detection)(struct imx_usbmisc_data *data); |
| /* usb charger secondary detection */ |
| int (*charger_secondary_detection)(struct imx_usbmisc_data *data); |
| /* It's called when system resume from usb power lost */ |
| int (*power_lost_check)(struct imx_usbmisc_data *data); |
| /* It's called before setting portsc.suspendM */ |
| int (*hsic_set_connect)(struct imx_usbmisc_data *data); |
| /* It's called during suspend/resume */ |
| int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled); |
| /* override UTMI termination select */ |
| int (*term_select_override)(struct imx_usbmisc_data *data, |
| bool enable, int val); |
| }; |
| |
| struct imx_usbmisc { |
| void __iomem *base; |
| spinlock_t lock; |
| const struct usbmisc_ops *ops; |
| }; |
| |
| static struct regulator *vbus_wakeup_reg; |
| |
| static int usbmisc_imx25_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val = 0; |
| |
| if (data->index > 1) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| switch (data->index) { |
| case 0: |
| val = readl(usbmisc->base); |
| val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); |
| val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; |
| val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); |
| writel(val, usbmisc->base); |
| break; |
| case 1: |
| val = readl(usbmisc->base); |
| val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT | MX25_H1_IPPUE_UP_BIT); |
| val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; |
| val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | |
| MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); |
| |
| writel(val, usbmisc->base); |
| |
| break; |
| } |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx25_post(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| void __iomem *reg; |
| unsigned long flags; |
| u32 val; |
| |
| if (data->index > 2) |
| return -EINVAL; |
| |
| if (data->evdo) { |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET; |
| val = readl(reg); |
| writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| usleep_range(5000, 10000); /* needed to stabilize voltage */ |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx27_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val; |
| |
| switch (data->index) { |
| case 0: |
| val = MX27_OTG_PM_BIT; |
| break; |
| case 1: |
| val = MX27_H1_PM_BIT; |
| break; |
| case 2: |
| val = MX27_H2_PM_BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| if (data->disable_oc) |
| val = readl(usbmisc->base) | val; |
| else |
| val = readl(usbmisc->base) & ~val; |
| writel(val, usbmisc->base); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx53_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| void __iomem *reg = NULL; |
| unsigned long flags; |
| u32 val = 0; |
| |
| if (data->index > 3) |
| return -EINVAL; |
| |
| /* Select a 24 MHz reference clock for the PHY */ |
| val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); |
| val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK; |
| val |= MX53_USB_PLL_DIV_24_MHZ; |
| writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); |
| |
| if (data->disable_oc) { |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| switch (data->index) { |
| case 0: |
| reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG; |
| break; |
| case 1: |
| reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1; |
| break; |
| case 2: |
| reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; |
| break; |
| case 3: |
| reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; |
| break; |
| } |
| if (reg && val) |
| writel(val, reg); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data) |
| { |
| unsigned long flags; |
| u32 val, offset; |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| int ret = 0; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| if (data->index == 2 || data->index == 3) { |
| offset = (data->index - 2) * 4; |
| } else if (data->index == 0) { |
| /* |
| * For controllers later than imx7d (imx7d is included), |
| * each controller has its own non core register region. |
| * And the controllers before than imx7d, the 1st controller |
| * is not HSIC controller. |
| */ |
| offset = 0; |
| } else { |
| dev_err(data->dev, "index is error for usbmisc\n"); |
| offset = 0; |
| ret = -EINVAL; |
| } |
| |
| val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); |
| if (!(val & MX6_BM_HSIC_DEV_CONN)) |
| writel(val | MX6_BM_HSIC_DEV_CONN, |
| usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return ret; |
| } |
| |
| static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on) |
| { |
| unsigned long flags; |
| u32 val, offset; |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| int ret = 0; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| if (data->index == 2 || data->index == 3) { |
| offset = (data->index - 2) * 4; |
| } else if (data->index == 0) { |
| offset = 0; |
| } else { |
| dev_err(data->dev, "index is error for usbmisc\n"); |
| offset = 0; |
| ret = -EINVAL; |
| } |
| |
| val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); |
| val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; |
| if (on) |
| val |= MX6_BM_HSIC_CLK_ON; |
| else |
| val &= ~MX6_BM_HSIC_CLK_ON; |
| writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static u32 imx6q_finalize_wakeup_setting(struct imx_usbmisc_data *data) |
| { |
| if (data->available_role == USB_DR_MODE_PERIPHERAL) |
| return MX6_BM_VBUS_WAKEUP; |
| else if (data->available_role == USB_DR_MODE_OTG) |
| return MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP; |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx6q_set_wakeup |
| (struct imx_usbmisc_data *data, bool enabled) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| int ret = 0; |
| u32 val, wakeup_setting = MX6_BM_WAKEUP_ENABLE; |
| |
| if (data->index > 3) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| val = readl(usbmisc->base + data->index * 4); |
| if (enabled) { |
| wakeup_setting |= imx6q_finalize_wakeup_setting(data); |
| writel(val | wakeup_setting, usbmisc->base + data->index * 4); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| if (vbus_wakeup_reg) |
| ret = regulator_enable(vbus_wakeup_reg); |
| } else { |
| if (val & MX6_BM_WAKEUP_INTR) |
| pr_debug("wakeup int at ci_hdrc.%d\n", data->index); |
| wakeup_setting |= MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP; |
| writel(val & ~wakeup_setting, usbmisc->base + data->index * 4); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| if (vbus_wakeup_reg && regulator_is_enabled(vbus_wakeup_reg)) |
| regulator_disable(vbus_wakeup_reg); |
| } |
| |
| return ret; |
| } |
| |
| static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 reg, val; |
| |
| if (data->index > 3) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| |
| reg = readl(usbmisc->base + data->index * 4); |
| if (data->disable_oc) { |
| reg |= MX6_BM_OVER_CUR_DIS; |
| } else if (data->oc_polarity == 1) { |
| /* High active */ |
| reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); |
| } |
| writel(reg, usbmisc->base + data->index * 4); |
| |
| /* SoC non-burst setting */ |
| reg = readl(usbmisc->base + data->index * 4); |
| writel(reg | MX6_BM_NON_BURST_SETTING, |
| usbmisc->base + data->index * 4); |
| |
| /* For HSIC controller */ |
| if (data->index == 2 || data->index == 3) { |
| val = readl(usbmisc->base + data->index * 4); |
| writel(val | MX6_BM_UTMI_ON_CLOCK, |
| usbmisc->base + data->index * 4); |
| val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET |
| + (data->index - 2) * 4); |
| val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; |
| writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET |
| + (data->index - 2) * 4); |
| |
| /* |
| * Need to add delay to wait 24M OSC to be stable, |
| * It is board specific. |
| */ |
| regmap_read(data->anatop, ANADIG_ANA_MISC0, &val); |
| /* 0 <= data->osc_clkgate_delay <= 7 */ |
| if (data->osc_clkgate_delay > ANADIG_ANA_MISC0_CLK_DELAY(val)) |
| regmap_write(data->anatop, ANADIG_ANA_MISC0_SET, |
| (data->osc_clkgate_delay) << 26); |
| } |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| usbmisc_imx6q_set_wakeup(data, false); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) |
| { |
| void __iomem *reg = NULL; |
| unsigned long flags; |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| u32 val; |
| |
| usbmisc_imx6q_init(data); |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| if (data->index == 0 || data->index == 1) { |
| reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4; |
| /* Set vbus wakeup source as bvalid */ |
| val = readl(reg); |
| writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg); |
| /* |
| * Disable dp/dm wakeup in device mode when vbus is |
| * not there. |
| */ |
| val = readl(usbmisc->base + data->index * 4); |
| writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN, |
| usbmisc->base + data->index * 4); |
| } |
| |
| /* For HSIC controller */ |
| if (data->index == 2) { |
| val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET |
| + (data->index - 2) * 4); |
| val |= MX6SX_BM_HSIC_AUTO_RESUME; |
| writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET |
| + (data->index - 2) * 4); |
| } |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int usbmisc_vf610_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| u32 reg; |
| |
| /* |
| * Vybrid only has one misc register set, but in two different |
| * areas. These is reflected in two instances of this driver. |
| */ |
| if (data->index >= 1) |
| return -EINVAL; |
| |
| if (data->disable_oc) { |
| reg = readl(usbmisc->base); |
| writel(reg | VF610_OVER_CUR_DIS, usbmisc->base); |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx7d_set_wakeup |
| (struct imx_usbmisc_data *data, bool enabled) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val; |
| u32 wakeup_setting = MX6_BM_WAKEUP_ENABLE; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| val = readl(usbmisc->base); |
| if (enabled) { |
| wakeup_setting |= imx6q_finalize_wakeup_setting(data); |
| writel(val | wakeup_setting, usbmisc->base); |
| } else { |
| if (val & MX6_BM_WAKEUP_INTR) |
| dev_dbg(data->dev, "wakeup int\n"); |
| wakeup_setting |= MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP; |
| writel(val & ~wakeup_setting, usbmisc->base); |
| } |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 reg; |
| |
| if (data->index >= 1) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| reg = readl(usbmisc->base); |
| if (data->disable_oc) { |
| reg |= MX6_BM_OVER_CUR_DIS; |
| } else if (data->oc_polarity == 1) { |
| /* High active */ |
| reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); |
| } |
| |
| if (data->pwr_polarity) |
| reg |= MX6_BM_PRW_POLARITY; |
| |
| writel(reg, usbmisc->base); |
| |
| /* SoC non-burst setting */ |
| reg = readl(usbmisc->base); |
| writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base); |
| |
| reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; |
| writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| |
| if (data->hsic) { |
| reg = readl(usbmisc->base); |
| writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base); |
| |
| reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); |
| reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; |
| writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); |
| |
| reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| writel(reg | MX7D_USBNC_HSIC_AUTO_RESUME, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| } |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| usbmisc_imx7d_set_wakeup(data, false); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx7d_power_lost_check(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| val = readl(usbmisc->base); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| /* |
| * Here use a power on reset value to judge |
| * if the controller experienced a power lost |
| */ |
| if (val == 0x30001000) |
| return 1; |
| else |
| return 0; |
| } |
| |
| |
| /***************************************************************************/ |
| /* imx usb charger detecton */ |
| /***************************************************************************/ |
| static void usb_charger_is_present(struct usb_charger *charger, bool present) |
| { |
| if (present) |
| charger->present = 1; |
| else |
| charger->present = 0; |
| |
| power_supply_changed(charger->psy); |
| sysfs_notify(&charger->psy->dev.kobj, NULL, "present"); |
| } |
| |
| static void imx6_disable_charger_detector(struct imx_usbmisc_data *data) |
| { |
| struct regmap *regmap = data->anatop; |
| |
| regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, |
| ANADIG_USB1_CHRG_DETECT_EN_B | |
| ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); |
| } |
| |
| static int imx6_charger_data_contact_detect(struct imx_usbmisc_data *data) |
| { |
| struct regmap *regmap = data->anatop; |
| struct usb_charger *charger = data->charger; |
| u32 val; |
| int i, data_pin_contact_count = 0; |
| |
| /* check if vbus is valid */ |
| regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val); |
| if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) { |
| dev_err(charger->dev, "vbus is error\n"); |
| return -EINVAL; |
| } |
| |
| /* Enable charger detector */ |
| regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR, |
| ANADIG_USB1_CHRG_DETECT_EN_B); |
| /* |
| * - Do not check whether a charger is connected to the USB port |
| * - Check whether the USB plug has been in contact with each other |
| */ |
| regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, |
| ANADIG_USB1_CHRG_DETECT_CHK_CONTACT | |
| ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); |
| |
| /* Check if plug is connected */ |
| for (i = 0; i < 100; i = i + 1) { |
| regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); |
| if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) { |
| data_pin_contact_count++; |
| if (data_pin_contact_count > 5) |
| /* Data pin makes contact */ |
| break; |
| else |
| usleep_range(5000, 10000); |
| } else { |
| data_pin_contact_count = 0; |
| usleep_range(5000, 6000); |
| } |
| } |
| |
| if (i == 100) { |
| dev_err(charger->dev, |
| "VBUS is coming from a dedicated power supply.\n"); |
| imx6_disable_charger_detector(data); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static int imx6_charger_primary_detection(struct imx_usbmisc_data *data) |
| { |
| struct regmap *regmap = data->anatop; |
| struct usb_charger *charger = data->charger; |
| u32 val; |
| int ret; |
| |
| ret = imx6_charger_data_contact_detect(data); |
| if (ret) |
| return ret; |
| |
| /* |
| * - Do check whether a charger is connected to the USB port |
| * - Do not Check whether the USB plug has been in contact with |
| * each other |
| */ |
| regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR, |
| ANADIG_USB1_CHRG_DETECT_CHK_CONTACT | |
| ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); |
| |
| msleep(100); |
| |
| /* Check if it is a charger */ |
| regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); |
| if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) { |
| dev_dbg(charger->dev, "It is a stardard downstream port\n"); |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_USB; |
| charger->max_current = 500; |
| } |
| |
| imx6_disable_charger_detector(data); |
| return 0; |
| } |
| |
| /* |
| * It must be called after dp is pulled up (from USB controller driver), |
| * That is used to differentiate DCP and CDP |
| */ |
| int imx6_charger_secondary_detection(struct imx_usbmisc_data *data) |
| { |
| struct regmap *regmap = data->anatop; |
| struct usb_charger *charger = data->charger; |
| int val; |
| |
| msleep(80); |
| |
| mutex_lock(&charger->lock); |
| regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); |
| if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) { |
| dev_dbg(charger->dev, "It is a dedicate charging port\n"); |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP; |
| charger->max_current = 1500; |
| } else { |
| dev_dbg(charger->dev, "It is a charging downstream port\n"); |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP; |
| charger->max_current = 900; |
| } |
| |
| usb_charger_is_present(charger, true); |
| mutex_unlock(&charger->lock); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx6sx_power_lost_check(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| val = readl(usbmisc->base + data->index * 4); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| /* |
| * Here use a power on reset value to judge |
| * if the controller experienced a power lost |
| */ |
| if (val == 0x30001000) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static void imx7_disable_charger_detector(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); |
| val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB | |
| MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 | |
| MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 | |
| MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL); |
| writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2); |
| |
| /* Set OPMODE to be 2'b00 and disable its override */ |
| val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK; |
| writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| |
| val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| } |
| |
| static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| struct usb_charger *charger = data->charger; |
| unsigned long flags; |
| u32 val; |
| int i, data_pin_contact_count = 0; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| |
| /* check if vbus is valid */ |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); |
| if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) { |
| dev_err(charger->dev, "vbus is error\n"); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| return -EINVAL; |
| } |
| |
| /* |
| * - Do not check whether a charger is connected to the USB port |
| * - Check whether the USB plug has been in contact with each other |
| */ |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); |
| writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB, |
| usbmisc->base + MX7D_USB_OTG_PHY_CFG2); |
| |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| /* Check if plug is connected */ |
| for (i = 0; i < 100; i = i + 1) { |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); |
| if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) { |
| if (data_pin_contact_count++ > 5) |
| /* Data pin makes contact */ |
| break; |
| else |
| usleep_range(5000, 10000); |
| } else { |
| data_pin_contact_count = 0; |
| usleep_range(5000, 6000); |
| } |
| } |
| |
| if (i == 100) { |
| dev_err(charger->dev, |
| "VBUS is coming from a dedicated power supply.\n"); |
| imx7_disable_charger_detector(data); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| struct usb_charger *charger = data->charger; |
| unsigned long flags; |
| u32 val; |
| int ret; |
| |
| ret = imx7d_charger_data_contact_detect(data); |
| if (ret) |
| return ret; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| /* Set OPMODE to be non-driving mode */ |
| val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK; |
| val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING; |
| writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| |
| val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| |
| /* |
| * - Do check whether a charger is connected to the USB port |
| * - Do not Check whether the USB plug has been in contact with |
| * each other |
| */ |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); |
| writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 | |
| MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0, |
| usbmisc->base + MX7D_USB_OTG_PHY_CFG2); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| usleep_range(1000, 2000); |
| |
| /* Check if it is a charger */ |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); |
| if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) { |
| dev_dbg(charger->dev, "It is a stardard downstream port\n"); |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_USB; |
| charger->max_current = 500; |
| } |
| |
| imx7_disable_charger_detector(data); |
| |
| return 0; |
| } |
| |
| /* |
| * It must be called after dp is pulled up (from USB controller driver), |
| * That is used to differentiate DCP and CDP |
| */ |
| int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| struct usb_charger *charger = data->charger; |
| int val; |
| |
| msleep(80); |
| |
| mutex_lock(&charger->lock); |
| val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); |
| if (val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE1) { |
| dev_dbg(charger->dev, "It is a dedicate charging port\n"); |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP; |
| charger->max_current = 1500; |
| } else { |
| dev_dbg(charger->dev, "It is a charging downstream port\n"); |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP; |
| charger->max_current = 900; |
| } |
| |
| usb_charger_is_present(charger, true); |
| mutex_unlock(&charger->lock); |
| |
| return 0; |
| } |
| |
| static int usbmisc_term_select_override(struct imx_usbmisc_data *data, |
| bool enable, int val) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 reg; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| |
| reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| if (enable) { |
| if (val) |
| writel(reg | MX7D_USB_TERMSEL_OVERRIDE, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| else |
| writel(reg & ~MX7D_USB_TERMSEL_OVERRIDE, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| |
| reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| writel(reg | MX7D_USB_TERMSEL_OVERRIDE_EN, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| } else { |
| writel(reg & ~MX7D_USB_TERMSEL_OVERRIDE_EN, |
| usbmisc->base + MX7D_USBNC_USB_CTRL2); |
| } |
| |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static const struct usbmisc_ops imx25_usbmisc_ops = { |
| .init = usbmisc_imx25_init, |
| .post = usbmisc_imx25_post, |
| }; |
| |
| static const struct usbmisc_ops imx27_usbmisc_ops = { |
| .init = usbmisc_imx27_init, |
| }; |
| |
| static const struct usbmisc_ops imx53_usbmisc_ops = { |
| .init = usbmisc_imx53_init, |
| }; |
| |
| static const struct usbmisc_ops imx6q_usbmisc_ops = { |
| .set_wakeup = usbmisc_imx6q_set_wakeup, |
| .init = usbmisc_imx6q_init, |
| .charger_primary_detection = imx6_charger_primary_detection, |
| .charger_secondary_detection = imx6_charger_secondary_detection, |
| .hsic_set_connect = usbmisc_imx6_hsic_set_connect, |
| .hsic_set_clk = usbmisc_imx6_hsic_set_clk, |
| }; |
| |
| static const struct usbmisc_ops vf610_usbmisc_ops = { |
| .init = usbmisc_vf610_init, |
| }; |
| |
| static const struct usbmisc_ops imx6sx_usbmisc_ops = { |
| .set_wakeup = usbmisc_imx6q_set_wakeup, |
| .init = usbmisc_imx6sx_init, |
| .charger_primary_detection = imx6_charger_primary_detection, |
| .charger_secondary_detection = imx6_charger_secondary_detection, |
| .power_lost_check = usbmisc_imx6sx_power_lost_check, |
| .hsic_set_connect = usbmisc_imx6_hsic_set_connect, |
| .hsic_set_clk = usbmisc_imx6_hsic_set_clk, |
| }; |
| |
| static const struct usbmisc_ops imx7d_usbmisc_ops = { |
| .init = usbmisc_imx7d_init, |
| .set_wakeup = usbmisc_imx7d_set_wakeup, |
| .power_lost_check = usbmisc_imx7d_power_lost_check, |
| .charger_primary_detection = imx7d_charger_primary_detection, |
| .charger_secondary_detection = imx7d_charger_secondary_detection, |
| .term_select_override = usbmisc_term_select_override, |
| .hsic_set_connect = usbmisc_imx6_hsic_set_connect, |
| .hsic_set_clk = usbmisc_imx6_hsic_set_clk, |
| }; |
| |
| static const struct usbmisc_ops imx7ulp_usbmisc_ops = { |
| .init = usbmisc_imx7d_init, |
| .set_wakeup = usbmisc_imx7d_set_wakeup, |
| .power_lost_check = usbmisc_imx7d_power_lost_check, |
| .hsic_set_connect = usbmisc_imx6_hsic_set_connect, |
| .hsic_set_clk = usbmisc_imx6_hsic_set_clk, |
| }; |
| |
| int imx_usbmisc_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->init) |
| return 0; |
| return usbmisc->ops->init(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_init); |
| |
| int imx_usbmisc_init_post(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->post) |
| return 0; |
| return usbmisc->ops->post(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_init_post); |
| |
| int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->set_wakeup) |
| return 0; |
| return usbmisc->ops->set_wakeup(data, enabled); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); |
| |
| int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect) |
| { |
| struct imx_usbmisc *usbmisc; |
| struct usb_charger *charger; |
| int ret = 0; |
| |
| if (!data) |
| return -EINVAL; |
| |
| charger = data->charger; |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->charger_primary_detection) |
| return -ENOTSUPP; |
| |
| mutex_lock(&charger->lock); |
| if (connect) { |
| charger->online = 1; |
| ret = usbmisc->ops->charger_primary_detection(data); |
| if (ret) { |
| dev_err(charger->dev, |
| "Error occurs during detection: %d\n", |
| ret); |
| } else { |
| if (charger->psy_desc.type == POWER_SUPPLY_TYPE_USB) |
| usb_charger_is_present(charger, true); |
| } |
| } else { |
| charger->online = 0; |
| charger->max_current = 0; |
| charger->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; |
| |
| usb_charger_is_present(charger, false); |
| } |
| mutex_unlock(&charger->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection); |
| |
| int imx_usbmisc_charger_secondary_detection(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->charger_secondary_detection) |
| return 0; |
| return usbmisc->ops->charger_secondary_detection(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_charger_secondary_detection); |
| |
| int imx_usbmisc_power_lost_check(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->power_lost_check) |
| return 0; |
| return usbmisc->ops->power_lost_check(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_power_lost_check); |
| |
| int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->hsic_set_connect || !data->hsic) |
| return 0; |
| return usbmisc->ops->hsic_set_connect(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect); |
| |
| int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->hsic_set_clk || !data->hsic) |
| return 0; |
| return usbmisc->ops->hsic_set_clk(data, on); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk); |
| |
| int imx_usbmisc_term_select_override(struct imx_usbmisc_data *data, |
| bool enable, int val) |
| { |
| struct imx_usbmisc *usbmisc; |
| |
| if (!data) |
| return 0; |
| |
| usbmisc = dev_get_drvdata(data->dev); |
| if (!usbmisc->ops->term_select_override) |
| return 0; |
| return usbmisc->ops->term_select_override(data, enable, val); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_term_select_override); |
| |
| static const struct of_device_id usbmisc_imx_dt_ids[] = { |
| { |
| .compatible = "fsl,imx25-usbmisc", |
| .data = &imx25_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx35-usbmisc", |
| .data = &imx25_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx27-usbmisc", |
| .data = &imx27_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx51-usbmisc", |
| .data = &imx53_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx53-usbmisc", |
| .data = &imx53_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx6q-usbmisc", |
| .data = &imx6q_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,vf610-usbmisc", |
| .data = &vf610_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx6sx-usbmisc", |
| .data = &imx6sx_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx6ul-usbmisc", |
| .data = &imx6sx_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx7d-usbmisc", |
| .data = &imx7d_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx7ulp-usbmisc", |
| .data = &imx7ulp_usbmisc_ops, |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); |
| |
| static int usbmisc_imx_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct imx_usbmisc *data; |
| const struct of_device_id *of_id; |
| |
| of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev); |
| if (!of_id) |
| return -ENODEV; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| spin_lock_init(&data->lock); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| data->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(data->base)) |
| return PTR_ERR(data->base); |
| |
| data->ops = (const struct usbmisc_ops *)of_id->data; |
| platform_set_drvdata(pdev, data); |
| |
| vbus_wakeup_reg = devm_regulator_get(&pdev->dev, "vbus-wakeup"); |
| if (PTR_ERR(vbus_wakeup_reg) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| else if (PTR_ERR(vbus_wakeup_reg) == -ENODEV) |
| /* no vbus regualator is needed */ |
| vbus_wakeup_reg = NULL; |
| else if (IS_ERR(vbus_wakeup_reg)) { |
| dev_err(&pdev->dev, "Getting regulator error: %ld\n", |
| PTR_ERR(vbus_wakeup_reg)); |
| return PTR_ERR(vbus_wakeup_reg); |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx_remove(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| static struct platform_driver usbmisc_imx_driver = { |
| .probe = usbmisc_imx_probe, |
| .remove = usbmisc_imx_remove, |
| .driver = { |
| .name = "usbmisc_imx", |
| .of_match_table = usbmisc_imx_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(usbmisc_imx_driver); |
| |
| MODULE_ALIAS("platform:usbmisc-imx"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("driver for imx usb non-core registers"); |
| MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); |