| * Renesas R-Car PWM Timer Controller |
| |
| Required Properties: |
| - compatible: should be "renesas,pwm-rcar" and one of the following. |
| - "renesas,pwm-r8a7778": for R-Car M1A |
| - "renesas,pwm-r8a7779": for R-Car H1 |
| - "renesas,pwm-r8a7790": for R-Car H2 |
| - "renesas,pwm-r8a7791": for R-Car M2-W |
| - "renesas,pwm-r8a7794": for R-Car E2 |
| - "renesas,pwm-r8a7795": for R-Car H3 |
| - "renesas,pwm-r8a7796": for R-Car M3-W |
| - reg: base address and length of the registers block for the PWM. |
| - #pwm-cells: should be 2. See pwm.txt in this directory for a description of |
| the cells format. |
| - clocks: clock phandle and specifier pair. |
| - pinctrl-0: phandle, referring to a default pin configuration node. |
| - pinctrl-names: Set to "default". |
| |
| Example: R8A7790 (R-Car H2) PWM Timer node |
| |
| pwm0: pwm@e6e30000 { |
| compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; |
| reg = <0 0xe6e30000 0 0x8>; |
| #pwm-cells = <2>; |
| clocks = <&mstp5_clks R8A7790_CLK_PWM>; |
| pinctrl-0 = <&pwm0_pins>; |
| pinctrl-names = "default"; |
| }; |
