| Davicom DM9000 Fast Ethernet controller |
| |
| Required properties: |
| - compatible = "davicom,dm9000"; |
| - reg : physical addresses and sizes of registers, must contain 2 entries: |
| first entry : address register, |
| second entry : data register. |
| - interrupt-parent : interrupt controller to which the device is connected |
| - interrupts : interrupt specifier specific to interrupt controller |
| |
| Optional properties: |
| - davicom,no-eeprom : Configuration EEPROM is not available |
| - davicom,ext-phy : Use external PHY |
| - reset-gpios : phandle of gpio that will be used to reset chip during probe |
| - vcc-supply : phandle of regulator that will be used to enable power to chip |
| |
| Example: |
| |
| ethernet@18000000 { |
| compatible = "davicom,dm9000"; |
| reg = <0x18000000 0x2 0x18000004 0x2>; |
| interrupt-parent = <&gpn>; |
| interrupts = <7 4>; |
| local-mac-address = [00 00 de ad be ef]; |
| davicom,no-eeprom; |
| reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; |
| vcc-supply = <ð0_power>; |
| }; |
