|  | /* | 
|  | * Atmel Nand Flash Controller (NFC) - System peripherals regsters. | 
|  | * Based on SAMA5D3 datasheet. | 
|  | * | 
|  | * © Copyright 2013 Atmel Corporation. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the | 
|  | * Free Software Foundation; either version 2 of the License, or (at your | 
|  | * option) any later version. | 
|  | */ | 
|  |  | 
|  | #ifndef ATMEL_NAND_NFC_H | 
|  | #define ATMEL_NAND_NFC_H | 
|  |  | 
|  | /* | 
|  | * HSMC NFC registers | 
|  | */ | 
|  | #define ATMEL_HSMC_NFC_CFG	0x00		/* NFC Configuration Register */ | 
|  | #define		NFC_CFG_PAGESIZE	(7 << 0) | 
|  | #define			NFC_CFG_PAGESIZE_512	(0 << 0) | 
|  | #define			NFC_CFG_PAGESIZE_1024	(1 << 0) | 
|  | #define			NFC_CFG_PAGESIZE_2048	(2 << 0) | 
|  | #define			NFC_CFG_PAGESIZE_4096	(3 << 0) | 
|  | #define			NFC_CFG_PAGESIZE_8192	(4 << 0) | 
|  | #define		NFC_CFG_WSPARE		(1 << 8) | 
|  | #define		NFC_CFG_RSPARE		(1 << 9) | 
|  | #define		NFC_CFG_NFC_DTOCYC	(0xf << 16) | 
|  | #define		NFC_CFG_NFC_DTOMUL	(0x7 << 20) | 
|  | #define		NFC_CFG_NFC_SPARESIZE	(0x7f << 24) | 
|  | #define		NFC_CFG_NFC_SPARESIZE_BIT_POS	24 | 
|  |  | 
|  | #define ATMEL_HSMC_NFC_CTRL	0x04		/* NFC Control Register */ | 
|  | #define		NFC_CTRL_ENABLE		(1 << 0) | 
|  | #define		NFC_CTRL_DISABLE	(1 << 1) | 
|  |  | 
|  | #define ATMEL_HSMC_NFC_SR	0x08		/* NFC Status Register */ | 
|  | #define		NFC_SR_BUSY		(1 << 8) | 
|  | #define		NFC_SR_XFR_DONE		(1 << 16) | 
|  | #define		NFC_SR_CMD_DONE		(1 << 17) | 
|  | #define		NFC_SR_DTOE		(1 << 20) | 
|  | #define		NFC_SR_UNDEF		(1 << 21) | 
|  | #define		NFC_SR_AWB		(1 << 22) | 
|  | #define		NFC_SR_ASE		(1 << 23) | 
|  | #define		NFC_SR_RB_EDGE		(1 << 24) | 
|  |  | 
|  | #define ATMEL_HSMC_NFC_IER	0x0c | 
|  | #define ATMEL_HSMC_NFC_IDR	0x10 | 
|  | #define ATMEL_HSMC_NFC_IMR	0x14 | 
|  | #define ATMEL_HSMC_NFC_CYCLE0	0x18		/* NFC Address Cycle Zero */ | 
|  | #define		ATMEL_HSMC_NFC_ADDR_CYCLE0	(0xff) | 
|  |  | 
|  | #define ATMEL_HSMC_NFC_BANK	0x1c		/* NFC Bank Register */ | 
|  | #define		ATMEL_HSMC_NFC_BANK0		(0 << 0) | 
|  | #define		ATMEL_HSMC_NFC_BANK1		(1 << 0) | 
|  |  | 
|  | #define nfc_writel(addr, reg, value) \ | 
|  | writel((value), (addr) + ATMEL_HSMC_NFC_##reg) | 
|  |  | 
|  | #define nfc_readl(addr, reg) \ | 
|  | readl_relaxed((addr) + ATMEL_HSMC_NFC_##reg) | 
|  |  | 
|  | /* | 
|  | * NFC Address Command definitions | 
|  | */ | 
|  | #define NFCADDR_CMD_CMD1	(0xff << 2)	/* Command for Cycle 1 */ | 
|  | #define NFCADDR_CMD_CMD1_BIT_POS	2 | 
|  | #define NFCADDR_CMD_CMD2	(0xff << 10)	/* Command for Cycle 2 */ | 
|  | #define NFCADDR_CMD_CMD2_BIT_POS	10 | 
|  | #define NFCADDR_CMD_VCMD2	(0x1 << 18)	/* Valid Cycle 2 Command */ | 
|  | #define NFCADDR_CMD_ACYCLE	(0x7 << 19)	/* Number of Address required */ | 
|  | #define		NFCADDR_CMD_ACYCLE_NONE		(0x0 << 19) | 
|  | #define		NFCADDR_CMD_ACYCLE_1		(0x1 << 19) | 
|  | #define		NFCADDR_CMD_ACYCLE_2		(0x2 << 19) | 
|  | #define		NFCADDR_CMD_ACYCLE_3		(0x3 << 19) | 
|  | #define		NFCADDR_CMD_ACYCLE_4		(0x4 << 19) | 
|  | #define		NFCADDR_CMD_ACYCLE_5		(0x5 << 19) | 
|  | #define NFCADDR_CMD_ACYCLE_BIT_POS	19 | 
|  | #define NFCADDR_CMD_CSID	(0x7 << 22)	/* Chip Select Identifier */ | 
|  | #define		NFCADDR_CMD_CSID_0		(0x0 << 22) | 
|  | #define		NFCADDR_CMD_CSID_1		(0x1 << 22) | 
|  | #define		NFCADDR_CMD_CSID_2		(0x2 << 22) | 
|  | #define		NFCADDR_CMD_CSID_3		(0x3 << 22) | 
|  | #define		NFCADDR_CMD_CSID_4		(0x4 << 22) | 
|  | #define		NFCADDR_CMD_CSID_5		(0x5 << 22) | 
|  | #define		NFCADDR_CMD_CSID_6		(0x6 << 22) | 
|  | #define		NFCADDR_CMD_CSID_7		(0x7 << 22) | 
|  | #define NFCADDR_CMD_DATAEN	(0x1 << 25)	/* Data Transfer Enable */ | 
|  | #define NFCADDR_CMD_DATADIS	(0x0 << 25)	/* Data Transfer Disable */ | 
|  | #define NFCADDR_CMD_NFCRD	(0x0 << 26)	/* NFC Read Enable */ | 
|  | #define NFCADDR_CMD_NFCWR	(0x1 << 26)	/* NFC Write Enable */ | 
|  | #define NFCADDR_CMD_NFCBUSY	(0x1 << 27)	/* NFC Busy */ | 
|  |  | 
|  | #define nfc_cmd_addr1234_writel(cmd, addr1234, nfc_base) \ | 
|  | writel((addr1234), (cmd) + nfc_base) | 
|  |  | 
|  | #define nfc_cmd_readl(bitstatus, nfc_base) \ | 
|  | readl_relaxed((bitstatus) + nfc_base) | 
|  |  | 
|  | #define NFC_TIME_OUT_MS		100 | 
|  | #define	NFC_SRAM_BANK1_OFFSET	0x1200 | 
|  |  | 
|  | #endif |