| |
| /* |
| Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc. |
| All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, |
| this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright notice, |
| this list of conditions and the following disclaimer in the documentation |
| and/or other materials provided with the distribution. |
| * Neither the name of Trident Microsystems nor Hauppauge Computer Works |
| nor the names of its contributors may be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| POSSIBILITY OF SUCH DAMAGE. |
| |
| DRXJ specific header file |
| |
| Authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen |
| */ |
| |
| #ifndef __DRXJ_H__ |
| #define __DRXJ_H__ |
| /*------------------------------------------------------------------------- |
| INCLUDES |
| -------------------------------------------------------------------------*/ |
| |
| #include "drx_driver.h" |
| #include "drx_dap_fasi.h" |
| |
| /* Check DRX-J specific dap condition */ |
| /* Multi master mode and short addr format only will not work. |
| RMW, CRC reset, broadcast and switching back to single master mode |
| cannot be done with short addr only in multi master mode. */ |
| #if ((DRXDAP_SINGLE_MASTER == 0) && (DRXDAPFASI_LONG_ADDR_ALLOWED == 0)) |
| #error "Multi master mode and short addressing only is an illegal combination" |
| *; /* Generate a fatal compiler error to make sure it stops here, |
| this is necesarry because not all compilers stop after a #error. */ |
| #endif |
| |
| /*------------------------------------------------------------------------- |
| TYPEDEFS |
| -------------------------------------------------------------------------*/ |
| /*============================================================================*/ |
| /*============================================================================*/ |
| /*== code support ============================================================*/ |
| /*============================================================================*/ |
| /*============================================================================*/ |
| |
| /*============================================================================*/ |
| /*============================================================================*/ |
| /*== SCU cmd if =============================================================*/ |
| /*============================================================================*/ |
| /*============================================================================*/ |
| |
| struct drxjscu_cmd { |
| u16 command; |
| /**< Command number */ |
| u16 parameter_len; |
| /**< Data length in byte */ |
| u16 result_len; |
| /**< result length in byte */ |
| u16 *parameter; |
| /**< General purpous param */ |
| u16 *result; |
| /**< General purpous param */}; |
| |
| /*============================================================================*/ |
| /*============================================================================*/ |
| /*== CTRL CFG related data structures ========================================*/ |
| /*============================================================================*/ |
| /*============================================================================*/ |
| |
| /* extra intermediate lock state for VSB,QAM,NTSC */ |
| #define DRXJ_DEMOD_LOCK (DRX_LOCK_STATE_1) |
| |
| /* OOB lock states */ |
| #define DRXJ_OOB_AGC_LOCK (DRX_LOCK_STATE_1) /* analog gain control lock */ |
| #define DRXJ_OOB_SYNC_LOCK (DRX_LOCK_STATE_2) /* digital gain control lock */ |
| |
| /* Intermediate powermodes for DRXJ */ |
| #define DRXJ_POWER_DOWN_MAIN_PATH DRX_POWER_MODE_8 |
| #define DRXJ_POWER_DOWN_CORE DRX_POWER_MODE_9 |
| #define DRXJ_POWER_DOWN_PLL DRX_POWER_MODE_10 |
| |
| /* supstition for GPIO FNC mux */ |
| #define APP_O (0x0000) |
| |
| /*#define DRX_CTRL_BASE (0x0000)*/ |
| |
| #define DRXJ_CTRL_CFG_BASE (0x1000) |
| enum drxj_cfg_type { |
| DRXJ_CFG_AGC_RF = DRXJ_CTRL_CFG_BASE, |
| DRXJ_CFG_AGC_IF, |
| DRXJ_CFG_AGC_INTERNAL, |
| DRXJ_CFG_PRE_SAW, |
| DRXJ_CFG_AFE_GAIN, |
| DRXJ_CFG_SYMBOL_CLK_OFFSET, |
| DRXJ_CFG_ACCUM_CR_RS_CW_ERR, |
| DRXJ_CFG_FEC_MERS_SEQ_COUNT, |
| DRXJ_CFG_OOB_MISC, |
| DRXJ_CFG_SMART_ANT, |
| DRXJ_CFG_OOB_PRE_SAW, |
| DRXJ_CFG_VSB_MISC, |
| DRXJ_CFG_RESET_PACKET_ERR, |
| |
| /* ATV (FM) */ |
| DRXJ_CFG_ATV_OUTPUT, /* also for FM (SIF control) but not likely */ |
| DRXJ_CFG_ATV_MISC, |
| DRXJ_CFG_ATV_EQU_COEF, |
| DRXJ_CFG_ATV_AGC_STATUS, /* also for FM ( IF,RF, audioAGC ) */ |
| |
| DRXJ_CFG_MPEG_OUTPUT_MISC, |
| DRXJ_CFG_HW_CFG, |
| DRXJ_CFG_OOB_LO_POW, |
| |
| DRXJ_CFG_MAX /* dummy, never to be used */}; |
| |
| /** |
| * /struct enum drxj_cfg_smart_ant_io * smart antenna i/o. |
| */ |
| enum drxj_cfg_smart_ant_io { |
| DRXJ_SMT_ANT_OUTPUT = 0, |
| DRXJ_SMT_ANT_INPUT |
| }; |
| |
| /** |
| * /struct struct drxj_cfg_smart_ant * Set smart antenna. |
| */ |
| struct drxj_cfg_smart_ant { |
| enum drxj_cfg_smart_ant_io io; |
| u16 ctrl_data; |
| }; |
| |
| /** |
| * /struct DRXJAGCSTATUS_t |
| * AGC status information from the DRXJ-IQM-AF. |
| */ |
| struct drxj_agc_status { |
| u16 IFAGC; |
| u16 RFAGC; |
| u16 digital_agc; |
| }; |
| |
| /* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */ |
| |
| /** |
| * /struct enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ. |
| */ |
| enum drxj_agc_ctrl_mode { |
| DRX_AGC_CTRL_AUTO = 0, |
| DRX_AGC_CTRL_USER, |
| DRX_AGC_CTRL_OFF}; |
| |
| /** |
| * /struct struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ. |
| */ |
| struct drxj_cfg_agc { |
| enum drx_standard standard; /* standard for which these settings apply */ |
| enum drxj_agc_ctrl_mode ctrl_mode; /* off, user, auto */ |
| u16 output_level; /* range dependent on AGC */ |
| u16 min_output_level; /* range dependent on AGC */ |
| u16 max_output_level; /* range dependent on AGC */ |
| u16 speed; /* range dependent on AGC */ |
| u16 top; /* rf-agc take over point */ |
| u16 cut_off_current; /* rf-agc is accelerated if output current |
| is below cut-off current */}; |
| |
| /* DRXJ_CFG_PRE_SAW */ |
| |
| /** |
| * /struct struct drxj_cfg_pre_saw * Interface to configure pre SAW sense. |
| */ |
| struct drxj_cfg_pre_saw { |
| enum drx_standard standard; /* standard to which these settings apply */ |
| u16 reference; /* pre SAW reference value, range 0 .. 31 */ |
| bool use_pre_saw; /* true algorithms must use pre SAW sense */}; |
| |
| /* DRXJ_CFG_AFE_GAIN */ |
| |
| /** |
| * /struct struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA). |
| */ |
| struct drxj_cfg_afe_gain { |
| enum drx_standard standard; /* standard to which these settings apply */ |
| u16 gain; /* gain in 0.1 dB steps, DRXJ range 140 .. 335 */}; |
| |
| /** |
| * /struct drxjrs_errors |
| * Available failure information in DRXJ_FEC_RS. |
| * |
| * Container for errors that are received in the most recently finished measurment period |
| * |
| */ |
| struct drxjrs_errors { |
| u16 nr_bit_errors; |
| /**< no of pre RS bit errors */ |
| u16 nr_symbol_errors; |
| /**< no of pre RS symbol errors */ |
| u16 nr_packet_errors; |
| /**< no of pre RS packet errors */ |
| u16 nr_failures; |
| /**< no of post RS failures to decode */ |
| u16 nr_snc_par_fail_count; |
| /**< no of post RS bit erros */ |
| }; |
| |
| /** |
| * /struct struct drxj_cfg_vsb_misc * symbol error rate |
| */ |
| struct drxj_cfg_vsb_misc { |
| u32 symb_error; |
| /**< symbol error rate sps */}; |
| |
| /** |
| * /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate. |
| * |
| */ |
| enum drxj_mpeg_start_width { |
| DRXJ_MPEG_START_WIDTH_1CLKCYC, |
| DRXJ_MPEG_START_WIDTH_8CLKCYC}; |
| |
| /** |
| * /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate. |
| * |
| */ |
| enum drxj_mpeg_output_clock_rate { |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO, |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_75973K, |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_50625K, |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_37968K, |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_30375K, |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_25313K, |
| DRXJ_MPEGOUTPUT_CLOCK_RATE_21696K}; |
| |
| /** |
| * /struct DRXJCfgMisc_t |
| * Change TEI bit of MPEG output |
| * reverse MPEG output bit order |
| * set MPEG output clock rate |
| */ |
| struct drxj_cfg_mpeg_output_misc { |
| bool disable_tei_handling; /**< if true pass (not change) TEI bit */ |
| bool bit_reverse_mpeg_outout; /**< if true, parallel: msb on MD0; serial: lsb out first */ |
| enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate; |
| /**< set MPEG output clock rate that overwirtes the derived one from symbol rate */ |
| enum drxj_mpeg_start_width mpeg_start_width; /**< set MPEG output start width */}; |
| |
| /** |
| * /enum enum drxj_xtal_freq * Supported external crystal reference frequency. |
| */ |
| enum drxj_xtal_freq { |
| DRXJ_XTAL_FREQ_RSVD, |
| DRXJ_XTAL_FREQ_27MHZ, |
| DRXJ_XTAL_FREQ_20P25MHZ, |
| DRXJ_XTAL_FREQ_4MHZ}; |
| |
| /** |
| * /enum enum drxj_xtal_freq * Supported external crystal reference frequency. |
| */ |
| enum drxji2c_speed { |
| DRXJ_I2C_SPEED_400KBPS, |
| DRXJ_I2C_SPEED_100KBPS}; |
| |
| /** |
| * /struct struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal reference frequency, I2C speed, etc... |
| */ |
| struct drxj_cfg_hw_cfg { |
| enum drxj_xtal_freq xtal_freq; |
| /**< crystal reference frequency */ |
| enum drxji2c_speed i2c_speed; |
| /**< 100 or 400 kbps */}; |
| |
| /* |
| * DRXJ_CFG_ATV_MISC |
| */ |
| struct drxj_cfg_atv_misc { |
| s16 peak_filter; /* -8 .. 15 */ |
| u16 noise_filter; /* 0 .. 15 */}; |
| |
| /* |
| * struct drxj_cfg_oob_misc */ |
| #define DRXJ_OOB_STATE_RESET 0x0 |
| #define DRXJ_OOB_STATE_AGN_HUNT 0x1 |
| #define DRXJ_OOB_STATE_DGN_HUNT 0x2 |
| #define DRXJ_OOB_STATE_AGC_HUNT 0x3 |
| #define DRXJ_OOB_STATE_FRQ_HUNT 0x4 |
| #define DRXJ_OOB_STATE_PHA_HUNT 0x8 |
| #define DRXJ_OOB_STATE_TIM_HUNT 0x10 |
| #define DRXJ_OOB_STATE_EQU_HUNT 0x20 |
| #define DRXJ_OOB_STATE_EQT_HUNT 0x30 |
| #define DRXJ_OOB_STATE_SYNC 0x40 |
| |
| struct drxj_cfg_oob_misc { |
| struct drxj_agc_status agc; |
| bool eq_lock; |
| bool sym_timing_lock; |
| bool phase_lock; |
| bool freq_lock; |
| bool dig_gain_lock; |
| bool ana_gain_lock; |
| u8 state; |
| }; |
| |
| /* |
| * Index of in array of coef |
| */ |
| enum drxj_cfg_oob_lo_power { |
| DRXJ_OOB_LO_POW_MINUS0DB = 0, |
| DRXJ_OOB_LO_POW_MINUS5DB, |
| DRXJ_OOB_LO_POW_MINUS10DB, |
| DRXJ_OOB_LO_POW_MINUS15DB, |
| DRXJ_OOB_LO_POW_MAX}; |
| |
| /* |
| * DRXJ_CFG_ATV_EQU_COEF |
| */ |
| struct drxj_cfg_atv_equ_coef { |
| s16 coef0; /* -256 .. 255 */ |
| s16 coef1; /* -256 .. 255 */ |
| s16 coef2; /* -256 .. 255 */ |
| s16 coef3; /* -256 .. 255 */}; |
| |
| /* |
| * Index of in array of coef |
| */ |
| enum drxj_coef_array_index { |
| DRXJ_COEF_IDX_MN = 0, |
| DRXJ_COEF_IDX_FM, |
| DRXJ_COEF_IDX_L, |
| DRXJ_COEF_IDX_LP, |
| DRXJ_COEF_IDX_BG, |
| DRXJ_COEF_IDX_DK, |
| DRXJ_COEF_IDX_I, |
| DRXJ_COEF_IDX_MAX}; |
| |
| /* |
| * DRXJ_CFG_ATV_OUTPUT |
| */ |
| |
| /** |
| * /enum DRXJAttenuation_t |
| * Attenuation setting for SIF AGC. |
| * |
| */ |
| enum drxjsif_attenuation { |
| DRXJ_SIF_ATTENUATION_0DB, |
| DRXJ_SIF_ATTENUATION_3DB, |
| DRXJ_SIF_ATTENUATION_6DB, |
| DRXJ_SIF_ATTENUATION_9DB}; |
| |
| /** |
| * /struct struct drxj_cfg_atv_output * SIF attenuation setting. |
| * |
| */ |
| struct drxj_cfg_atv_output { |
| bool enable_cvbs_output; /* true= enabled */ |
| bool enable_sif_output; /* true= enabled */ |
| enum drxjsif_attenuation sif_attenuation; |
| }; |
| |
| /* |
| DRXJ_CFG_ATV_AGC_STATUS (get only) |
| */ |
| /* TODO : AFE interface not yet finished, subject to change */ |
| struct drxj_cfg_atv_agc_status { |
| u16 rf_agc_gain; /* 0 .. 877 uA */ |
| u16 if_agc_gain; /* 0 .. 877 uA */ |
| s16 video_agc_gain; /* -75 .. 1972 in 0.1 dB steps */ |
| s16 audio_agc_gain; /* -4 .. 1020 in 0.1 dB steps */ |
| u16 rf_agc_loop_gain; /* 0 .. 7 */ |
| u16 if_agc_loop_gain; /* 0 .. 7 */ |
| u16 video_agc_loop_gain; /* 0 .. 7 */}; |
| |
| /*============================================================================*/ |
| /*============================================================================*/ |
| /*== CTRL related data structures ============================================*/ |
| /*============================================================================*/ |
| /*============================================================================*/ |
| |
| /* NONE */ |
| |
| /*============================================================================*/ |
| /*============================================================================*/ |
| |
| /*========================================*/ |
| /** |
| * /struct struct drxj_data * DRXJ specific attributes. |
| * |
| * Global data container for DRXJ specific data. |
| * |
| */ |
| struct drxj_data { |
| /* device capabilties (determined during drx_open()) */ |
| bool has_lna; /**< true if LNA (aka PGA) present */ |
| bool has_oob; /**< true if OOB supported */ |
| bool has_ntsc; /**< true if NTSC supported */ |
| bool has_btsc; /**< true if BTSC supported */ |
| bool has_smatx; /**< true if mat_tx is available */ |
| bool has_smarx; /**< true if mat_rx is available */ |
| bool has_gpio; /**< true if GPIO is available */ |
| bool has_irqn; /**< true if IRQN is available */ |
| /* A1/A2/A... */ |
| u8 mfx; /**< metal fix */ |
| |
| /* tuner settings */ |
| bool mirror_freq_spect_oob;/**< tuner inversion (true = tuner mirrors the signal */ |
| |
| /* standard/channel settings */ |
| enum drx_standard standard; /**< current standard information */ |
| enum drx_modulation constellation; |
| /**< current constellation */ |
| s32 frequency; /**< center signal frequency in KHz */ |
| enum drx_bandwidth curr_bandwidth; |
| /**< current channel bandwidth */ |
| enum drx_mirror mirror; /**< current channel mirror */ |
| |
| /* signal quality information */ |
| u32 fec_bits_desired; /**< BER accounting period */ |
| u16 fec_vd_plen; /**< no of trellis symbols: VD SER measurement period */ |
| u16 qam_vd_prescale; /**< Viterbi Measurement Prescale */ |
| u16 qam_vd_period; /**< Viterbi Measurement period */ |
| u16 fec_rs_plen; /**< defines RS BER measurement period */ |
| u16 fec_rs_prescale; /**< ReedSolomon Measurement Prescale */ |
| u16 fec_rs_period; /**< ReedSolomon Measurement period */ |
| bool reset_pkt_err_acc; /**< Set a flag to reset accumulated packet error */ |
| u16 pkt_err_acc_start; /**< Set a flag to reset accumulated packet error */ |
| |
| /* HI configuration */ |
| u16 hi_cfg_timing_div; /**< HI Configure() parameter 2 */ |
| u16 hi_cfg_bridge_delay; /**< HI Configure() parameter 3 */ |
| u16 hi_cfg_wake_up_key; /**< HI Configure() parameter 4 */ |
| u16 hi_cfg_ctrl; /**< HI Configure() parameter 5 */ |
| u16 hi_cfg_transmit; /**< HI Configure() parameter 6 */ |
| |
| /* UIO configuration */ |
| enum drxuio_mode uio_sma_rx_mode;/**< current mode of SmaRx pin */ |
| enum drxuio_mode uio_sma_tx_mode;/**< current mode of SmaTx pin */ |
| enum drxuio_mode uio_gpio_mode; /**< current mode of ASEL pin */ |
| enum drxuio_mode uio_irqn_mode; /**< current mode of IRQN pin */ |
| |
| /* IQM fs frequecy shift and inversion */ |
| u32 iqm_fs_rate_ofs; /**< frequency shifter setting after setchannel */ |
| bool pos_image; /**< Ture: positive image */ |
| /* IQM RC frequecy shift */ |
| u32 iqm_rc_rate_ofs; /**< frequency shifter setting after setchannel */ |
| |
| /* ATV configuration */ |
| u32 atv_cfg_changed_flags; /**< flag: flags cfg changes */ |
| s16 atv_top_equ0[DRXJ_COEF_IDX_MAX]; /**< shadow of ATV_TOP_EQU0__A */ |
| s16 atv_top_equ1[DRXJ_COEF_IDX_MAX]; /**< shadow of ATV_TOP_EQU1__A */ |
| s16 atv_top_equ2[DRXJ_COEF_IDX_MAX]; /**< shadow of ATV_TOP_EQU2__A */ |
| s16 atv_top_equ3[DRXJ_COEF_IDX_MAX]; /**< shadow of ATV_TOP_EQU3__A */ |
| bool phase_correction_bypass;/**< flag: true=bypass */ |
| s16 atv_top_vid_peak; /**< shadow of ATV_TOP_VID_PEAK__A */ |
| u16 atv_top_noise_th; /**< shadow of ATV_TOP_NOISE_TH__A */ |
| bool enable_cvbs_output; /**< flag CVBS ouput enable */ |
| bool enable_sif_output; /**< flag SIF ouput enable */ |
| enum drxjsif_attenuation sif_attenuation; |
| /**< current SIF att setting */ |
| /* Agc configuration for QAM and VSB */ |
| struct drxj_cfg_agc qam_rf_agc_cfg; /**< qam RF AGC config */ |
| struct drxj_cfg_agc qam_if_agc_cfg; /**< qam IF AGC config */ |
| struct drxj_cfg_agc vsb_rf_agc_cfg; /**< vsb RF AGC config */ |
| struct drxj_cfg_agc vsb_if_agc_cfg; /**< vsb IF AGC config */ |
| |
| /* PGA gain configuration for QAM and VSB */ |
| u16 qam_pga_cfg; /**< qam PGA config */ |
| u16 vsb_pga_cfg; /**< vsb PGA config */ |
| |
| /* Pre SAW configuration for QAM and VSB */ |
| struct drxj_cfg_pre_saw qam_pre_saw_cfg; |
| /**< qam pre SAW config */ |
| struct drxj_cfg_pre_saw vsb_pre_saw_cfg; |
| /**< qam pre SAW config */ |
| |
| /* Version information */ |
| char v_text[2][12]; /**< allocated text versions */ |
| struct drx_version v_version[2]; /**< allocated versions structs */ |
| struct drx_version_list v_list_elements[2]; |
| /**< allocated version list */ |
| |
| /* smart antenna configuration */ |
| bool smart_ant_inverted; |
| |
| /* Tracking filter setting for OOB */ |
| u16 oob_trk_filter_cfg[8]; |
| bool oob_power_on; |
| |
| /* MPEG static bitrate setting */ |
| u32 mpeg_ts_static_bitrate; /**< bitrate static MPEG output */ |
| bool disable_te_ihandling; /**< MPEG TS TEI handling */ |
| bool bit_reverse_mpeg_outout;/**< MPEG output bit order */ |
| enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate; |
| /**< MPEG output clock rate */ |
| enum drxj_mpeg_start_width mpeg_start_width; |
| /**< MPEG Start width */ |
| |
| /* Pre SAW & Agc configuration for ATV */ |
| struct drxj_cfg_pre_saw atv_pre_saw_cfg; |
| /**< atv pre SAW config */ |
| struct drxj_cfg_agc atv_rf_agc_cfg; /**< atv RF AGC config */ |
| struct drxj_cfg_agc atv_if_agc_cfg; /**< atv IF AGC config */ |
| u16 atv_pga_cfg; /**< atv pga config */ |
| |
| u32 curr_symbol_rate; |
| |
| /* pin-safe mode */ |
| bool pdr_safe_mode; /**< PDR safe mode activated */ |
| u16 pdr_safe_restore_val_gpio; |
| u16 pdr_safe_restore_val_v_sync; |
| u16 pdr_safe_restore_val_sma_rx; |
| u16 pdr_safe_restore_val_sma_tx; |
| |
| /* OOB pre-saw value */ |
| u16 oob_pre_saw; |
| enum drxj_cfg_oob_lo_power oob_lo_pow; |
| |
| struct drx_aud_data aud_data; |
| /**< audio storage */}; |
| |
| /*------------------------------------------------------------------------- |
| Access MACROS |
| -------------------------------------------------------------------------*/ |
| /** |
| * \brief Compilable references to attributes |
| * \param d pointer to demod instance |
| * |
| * Used as main reference to an attribute field. |
| * Can be used by both macro implementation and function implementation. |
| * These macros are defined to avoid duplication of code in macro and function |
| * definitions that handle access of demod common or extended attributes. |
| * |
| */ |
| |
| #define DRXJ_ATTR_BTSC_DETECT(d) \ |
| (((struct drxj_data *)(d)->my_ext_attr)->aud_data.btsc_detect) |
| |
| /*------------------------------------------------------------------------- |
| DEFINES |
| -------------------------------------------------------------------------*/ |
| |
| /** |
| * \def DRXJ_NTSC_CARRIER_FREQ_OFFSET |
| * \brief Offset from picture carrier to centre frequency in kHz, in RF domain |
| * |
| * For NTSC standard. |
| * NTSC channels are listed by their picture carrier frequency (Fpc). |
| * The function DRX_CTRL_SET_CHANNEL requires the centre frequency as input. |
| * In case the tuner module is not used the DRX-J requires that the tuner is |
| * tuned to the centre frequency of the channel: |
| * |
| * Fcentre = Fpc + DRXJ_NTSC_CARRIER_FREQ_OFFSET |
| * |
| */ |
| #define DRXJ_NTSC_CARRIER_FREQ_OFFSET ((s32)(1750)) |
| |
| /** |
| * \def DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET |
| * \brief Offset from picture carrier to centre frequency in kHz, in RF domain |
| * |
| * For PAL/SECAM - BG standard. This define is needed in case the tuner module |
| * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc). |
| * The DRX-J requires that the tuner is tuned to: |
| * Fpc + DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET |
| * |
| * In case the tuner module is used the drxdriver takes care of this. |
| * In case the tuner module is NOT used the application programmer must take |
| * care of this. |
| * |
| */ |
| #define DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET ((s32)(2375)) |
| |
| /** |
| * \def DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET |
| * \brief Offset from picture carrier to centre frequency in kHz, in RF domain |
| * |
| * For PAL/SECAM - DK, I, L standards. This define is needed in case the tuner module |
| * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc). |
| * The DRX-J requires that the tuner is tuned to: |
| * Fpc + DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET |
| * |
| * In case the tuner module is used the drxdriver takes care of this. |
| * In case the tuner module is NOT used the application programmer must take |
| * care of this. |
| * |
| */ |
| #define DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET ((s32)(2775)) |
| |
| /** |
| * \def DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET |
| * \brief Offset from picture carrier to centre frequency in kHz, in RF domain |
| * |
| * For PAL/SECAM - LP standard. This define is needed in case the tuner module |
| * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc). |
| * The DRX-J requires that the tuner is tuned to: |
| * Fpc + DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET |
| * |
| * In case the tuner module is used the drxdriver takes care of this. |
| * In case the tuner module is NOT used the application programmer must take |
| * care of this. |
| */ |
| #define DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET ((s32)(-3255)) |
| |
| /** |
| * \def DRXJ_FM_CARRIER_FREQ_OFFSET |
| * \brief Offset from sound carrier to centre frequency in kHz, in RF domain |
| * |
| * For FM standard. |
| * FM channels are listed by their sound carrier frequency (Fsc). |
| * The function DRX_CTRL_SET_CHANNEL requires the Ffm frequency (see below) as |
| * input. |
| * In case the tuner module is not used the DRX-J requires that the tuner is |
| * tuned to the Ffm frequency of the channel. |
| * |
| * Ffm = Fsc + DRXJ_FM_CARRIER_FREQ_OFFSET |
| * |
| */ |
| #define DRXJ_FM_CARRIER_FREQ_OFFSET ((s32)(-3000)) |
| |
| /* Revision types -------------------------------------------------------*/ |
| |
| #define DRXJ_TYPE_ID (0x3946000DUL) |
| |
| /* Macros ---------------------------------------------------------------*/ |
| |
| /* Convert OOB lock status to string */ |
| #define DRXJ_STR_OOB_LOCKSTATUS(x) ( \ |
| (x == DRX_NEVER_LOCK) ? "Never" : \ |
| (x == DRX_NOT_LOCKED) ? "No" : \ |
| (x == DRX_LOCKED) ? "Locked" : \ |
| (x == DRX_LOCK_STATE_1) ? "AGC lock" : \ |
| (x == DRX_LOCK_STATE_2) ? "sync lock" : \ |
| "(Invalid)") |
| |
| #endif /* __DRXJ_H__ */ |
