| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* |
| * NOTE: This DTS file is written for plugging in Murata Wi-Fi/BT EVK into Slot |
| * SD1 and using Murata i.MX InterConnect Ver 2.0 Adapter. Bluetooth UART & |
| * control signals are connected via ribbon cable (J4 connector). |
| */ |
| |
| #include "imx6sll-evk.dts" |
| |
| / { |
| modem_reset: modem-reset { |
| compatible = "gpio-reset"; |
| reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; |
| reset-delay-us = <1000>; |
| #reset-cells = <0>; |
| }; |
| |
| usdhc1_pwrseq: usdhc1_pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &iomuxc { |
| imx6sll-evk-murata-v2 { |
| pinctrl_wifi: wifigrp { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130b9 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 |
| |
| MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x17059 /* WL_REG_ON */ |
| MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x17059 /* WL_HOST_WAKE */ |
| >; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| status = "disabled"; |
| }; |
| |
| ®_sd3_vmmc { |
| regulator-always-on; |
| }; |
| |
| &uart5 { |
| resets = <&modem_reset>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi>; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| mmc-pwrseq = <&usdhc1_pwrseq>; |
| pm-ignore-notify; |
| cap-power-off-card; |
| |
| brcmf: bcrmf@1 { |
| reg = <1>; |
| compatible = "brcm,bcm4329-fmac"; |
| }; |
| }; |
