| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| / { |
| regulators { |
| wlreg_on: fixedregulator@100 { |
| compatible = "regulator-fixed"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-name = "wlreg_on"; |
| gpio = <&gpio4 30 0>; |
| startup-delay-us = <100>; |
| enable-active-high; |
| }; |
| }; |
| |
| bcmdhd_wlan_0: bcmdhd_wlan@0 { |
| compatible = "android,bcmdhd_wlan"; |
| wlreg_on-supply = <&wlreg_on>; |
| }; |
| }; |
| |
| &iomuxc { |
| imx6qdl-sabresd-murata-v2 { |
| /* add MUXing entry for SD2 4-bit interface |
| * and configure control pins |
| */ |
| pinctrl_wifi: wifigrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x13069 |
| >; |
| }; |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1f0b1 |
| MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1f0b1 |
| MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x13069 |
| >; |
| }; |
| pinctrl_uart5_1: uart5grp-1 { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| }; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| fsl,uart-has-rtscts; |
| status = "okay"; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode; */ |
| /*pinctrl-0 = <&pinctrl_uart2dte>; */ |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5_1>; |
| fsl,uart-has-rtscts; |
| status = "okay"; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode; */ |
| /* pinctrl-0 = <&pinctrl_uart5dte_1>; */ |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi>; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| cd-post; |
| pm-ignore-notify; |
| wifi-host; |
| }; |
