| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| aliases { |
| mxcfb0 = &mxcfb1; |
| mxcfb1 = &mxcfb2; |
| mxcfb2 = &mxcfb3; |
| mxcfb3 = &mxcfb4; |
| }; |
| |
| soc { |
| busfreq { |
| fsl,max_ddr_freq = <400000000>; |
| status = "okay"; |
| }; |
| }; |
| |
| hannstar_cabc { |
| compatible = "hannstar,cabc"; |
| |
| lvds0 { |
| gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; |
| |
| }; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory: memory { |
| reg = <0x10000000 0x40000000>; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_usb_otg_vbus: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 22 0>; |
| enable-active-high; |
| }; |
| }; |
| |
| sound-hdmi { |
| compatible = "fsl,imx6q-audio-hdmi", |
| "fsl,imx-audio-hdmi"; |
| model = "imx-audio-hdmi"; |
| hdmi-controller = <&hdmi_audio>; |
| }; |
| |
| mxcfb1: fb@0 { |
| compatible = "fsl,mxc_sdc_fb"; |
| disp_dev = "ldb"; |
| interface_pix_fmt = "RGB666"; |
| default_bpp = <16>; |
| int_clk = <0>; |
| late_init = <0>; |
| status = "disabled"; |
| }; |
| |
| mxcfb2: fb@1 { |
| compatible = "fsl,mxc_sdc_fb"; |
| disp_dev = "hdmi"; |
| interface_pix_fmt = "RGB24"; |
| mode_str ="1920x1080M@60"; |
| default_bpp = <24>; |
| int_clk = <0>; |
| late_init = <0>; |
| status = "disabled"; |
| }; |
| |
| mxcfb3: fb@2 { |
| compatible = "fsl,mxc_sdc_fb"; |
| disp_dev = "lcd"; |
| interface_pix_fmt = "RGB565"; |
| mode_str ="CLAA-WVGA"; |
| default_bpp = <16>; |
| int_clk = <0>; |
| late_init = <0>; |
| status = "disabled"; |
| }; |
| |
| mxcfb4: fb@3 { |
| compatible = "fsl,mxc_sdc_fb"; |
| disp_dev = "ldb"; |
| interface_pix_fmt = "RGB666"; |
| default_bpp = <16>; |
| int_clk = <0>; |
| late_init = <0>; |
| status = "disabled"; |
| }; |
| backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm4 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <7>; |
| status = "okay"; |
| }; |
| |
| v4l2_out { |
| compatible = "fsl,mxc_v4l2_output"; |
| status = "okay"; |
| }; |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| power { |
| label = "Power Button"; |
| gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| linux,code = <KEY_POWER>; |
| }; |
| }; |
| |
| }; |
| |
| ®_arm { |
| vin-supply = <&sw1a_reg>; |
| regulator-allow-bypass; |
| }; |
| |
| ®_soc { |
| vin-supply = <&sw1c_reg>; |
| regulator-allow-bypass; |
| }; |
| |
| ®_pu { |
| vin-supply = <&sw1c_reg>; |
| regulator-allow-bypass; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
| <&clks IMX6QDL_CLK_LDB_DI1_SEL>; |
| assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>, |
| <&clks IMX6QDL_CLK_MMDC_CH1_AXI>; |
| }; |
| |
| &ecspi1 { |
| fsl,spi-num-chipselects = <1>; |
| cs-gpios = <&gpio2 30 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "okay"; |
| flash: m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q128a13", "jedec,spi-nor"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| hdmi_edid: edid@50 { |
| compatible = "fsl,imx6-hdmi-i2c"; |
| reg = <0x50>; |
| }; |
| |
| pmic: pfuze100@08 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| egalax_ts@04 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2_egalax_int>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <8 2>; |
| wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| egalax_ts@04 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_egalax_int>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <7 2>; |
| wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| touchscreen@01 { |
| compatible = "vtl,ct365"; |
| reg = <0x01>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <14 0>; |
| gpios = <&gpio4 10 0>; |
| }; |
| |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| imx6qdl-sabresd { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio_keysgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| >; |
| }; |
| |
| pinctrl_i2c2_egalax_int: egalax_i2c2_intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 |
| >; |
| }; |
| |
| pinctrl_i2c3_egalax_int: egalax_i2c3_intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 |
| >; |
| }; |
| |
| pinctrl_hdmi_cec: hdmicecgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_hdcp: hdmihdcpgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__WDOG2_B 0x80000000 |
| >; |
| }; |
| |
| }; |
| }; |
| |
| &dcic1 { |
| dcic_id = <0>; |
| dcic_mux = "dcic-hdmi"; |
| status = "okay"; |
| }; |
| |
| &dcic2 { |
| dcic_id = <1>; |
| dcic_mux = "dcic-lvds1"; |
| status = "okay"; |
| }; |
| |
| &gpc { |
| fsl,ldo-bypass = <1>; |
| }; |
| |
| &hdmi_audio { |
| status = "okay"; |
| }; |
| |
| &hdmi_cec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_cec>; |
| status = "okay"; |
| }; |
| |
| &hdmi_core { |
| ipu_id = <0>; |
| disp_id = <1>; |
| status = "okay"; |
| }; |
| |
| &hdmi_video { |
| fsl,phy_reg_vlev = <0x0294>; |
| fsl,phy_reg_cksymtx = <0x800d>; |
| status = "okay"; |
| }; |
| |
| &ldb { |
| status = "okay"; |
| |
| lvds-channel@0 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| status = "okay"; |
| |
| display-timings { |
| native-mode = <&timing0>; |
| timing0: hsd100pxn1 { |
| clock-frequency = <65000000>; |
| hactive = <1024>; |
| vactive = <768>; |
| hback-porch = <220>; |
| hfront-porch = <40>; |
| vback-porch = <21>; |
| vfront-porch = <7>; |
| hsync-len = <60>; |
| vsync-len = <10>; |
| }; |
| }; |
| }; |
| |
| lvds-channel@1 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| primary; |
| status = "okay"; |
| |
| display-timings { |
| native-mode = <&timing1>; |
| timing1: hsd100pxn1 { |
| clock-frequency = <65000000>; |
| hactive = <1024>; |
| vactive = <768>; |
| hback-porch = <220>; |
| hfront-porch = <40>; |
| vback-porch = <21>; |
| vfront-porch = <7>; |
| hsync-len = <60>; |
| vsync-len = <10>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| status = "okay"; |
| }; |
| |
| &snvs_poweroff { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| disable-over-current; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usbphy1 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usbphy2 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <4>; |
| cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| bus-width = <4>; |
| cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| status = "disabled"; |
| }; |
| |
| &wdog2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
