| Allwinner Clock Control Unit Binding |
| ------------------------------------ |
| |
| Required properties : |
| - compatible: must contain one of the following compatibles: |
| - "allwinner,sun6i-a31-ccu" |
| - "allwinner,sun8i-a23-ccu" |
| - "allwinner,sun8i-a33-ccu" |
| - "allwinner,sun8i-h3-ccu" |
| |
| - reg: Must contain the registers base address and length |
| - clocks: phandle to the oscillators feeding the CCU. Two are needed: |
| - "hosc": the high frequency oscillator (usually at 24MHz) |
| - "losc": the low frequency oscillator (usually at 32kHz) |
| - clock-names: Must contain the clock names described just above |
| - #clock-cells : must contain 1 |
| - #reset-cells : must contain 1 |
| |
| Example: |
| ccu: clock@01c20000 { |
| compatible = "allwinner,sun8i-h3-ccu"; |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&osc32k>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
