drivers/media/i2c/ml86v7667.c

/*
 * OKI Semiconductor ML86V7667 video decoder driver
 *
 * Author: Vladimir Barinov <source@cogentembedded.com>
 * Copyright (C) 2013 Cogent Embedded, Inc.
 * Copyright (C) 2013 Renesas Solutions Corp.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-ctrls.h>

#define DRV_NAME "ml86v7667"

/* Subaddresses */
#define MRA_REG			0x00 /* Mode Register A */
#define MRC_REG			0x02 /* Mode Register C */
#define LUMC_REG		0x0C /* Luminance Control */
#define CLC_REG			0x10 /* Contrast level control */
#define SSEPL_REG		0x11 /* Sync separation level */
#define CHRCA_REG		0x12 /* Chrominance Control A */
#define ACCC_REG		0x14 /* ACC Loop filter & Chrominance control */
#define ACCRC_REG		0x15 /* ACC Reference level control */
#define HUE_REG			0x16 /* Hue control */
#define ADC2_REG		0x1F /* ADC Register 2 */
#define PLLR1_REG		0x20 /* PLL Register 1 */
#define STATUS_REG		0x2C /* STATUS Register */

/* Mode Register A register bits */
#define MRA_OUTPUT_MODE_MASK	(3 << 6)
#define MRA_ITUR_BT601		(1 << 6)
#define MRA_ITUR_BT656		(0 << 6)
#define MRA_INPUT_MODE_MASK	(7 << 3)
#define MRA_PAL_BT601		(4 << 3)
#define MRA_NTSC_BT601		(0 << 3)
#define MRA_REGISTER_MODE	(1 << 0)

/* Mode Register C register bits */
#define MRC_AUTOSELECT		(1 << 7)

/* Luminance Control register bits */
#define LUMC_ONOFF_SHIFT	7
#define LUMC_ONOFF_MASK		(1 << 7)

/* Contrast level control register bits */
#define CLC_CONTRAST_ONOFF	(1 << 7)
#define CLC_CONTRAST_MASK	0x0F

/* Sync separation level register bits */
#define SSEPL_LUMINANCE_ONOFF	(1 << 7)
#define SSEPL_LUMINANCE_MASK	0x7F

/* Chrominance Control A register bits */
#define CHRCA_MODE_SHIFT	6
#define CHRCA_MODE_MASK		(1 << 6)

/* ACC Loop filter & Chrominance control register bits */
#define ACCC_CHROMA_CR_SHIFT	3
#define ACCC_CHROMA_CR_MASK	(7 << 3)
#define ACCC_CHROMA_CB_SHIFT	0
#define ACCC_CHROMA_CB_MASK	(7 << 0)

/* ACC Reference level control register bits */
#define ACCRC_CHROMA_MASK	0xfc
#define ACCRC_CHROMA_SHIFT	2

/* ADC Register 2 register bits */
#define ADC2_CLAMP_VOLTAGE_MASK	(7 << 1)
#define ADC2_CLAMP_VOLTAGE(n)	((n & 7) << 1)

/* PLL Register 1 register bits */
#define PLLR1_FIXED_CLOCK	(1 << 7)

/* STATUS Register register bits */
#define STATUS_HLOCK_DETECT	(1 << 3)
#define STATUS_NTSCPAL		(1 << 2)

struct ml86v7667_priv {
	struct v4l2_subdev		sd;
	struct v4l2_ctrl_handler	hdl;
	v4l2_std_id			std;
};

static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev)
{
	return container_of(subdev, struct ml86v7667_priv, sd);
}

static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
{
	return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd;
}

static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg,
			      const u8 mask, const u8 data)
{
	int val = i2c_smbus_read_byte_data(client, reg);
	if (val < 0)
		return val;

	val = (val & ~mask) | (data & mask);
	return i2c_smbus_write_byte_data(client, reg, val);
}

static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl)
{
	struct v4l2_subdev *sd = to_sd(ctrl);
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	int ret = -EINVAL;

	switch (ctrl->id) {
	case V4L2_CID_BRIGHTNESS:
		ret = ml86v7667_mask_set(client, SSEPL_REG,
					 SSEPL_LUMINANCE_MASK, ctrl->val);
		break;
	case V4L2_CID_CONTRAST:
		ret = ml86v7667_mask_set(client, CLC_REG,
					 CLC_CONTRAST_MASK, ctrl->val);
		break;
	case V4L2_CID_CHROMA_GAIN:
		ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK,
					 ctrl->val << ACCRC_CHROMA_SHIFT);
		break;
	case V4L2_CID_HUE:
		ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val);
		break;
	case V4L2_CID_RED_BALANCE:
		ret = ml86v7667_mask_set(client, ACCC_REG,
					 ACCC_CHROMA_CR_MASK,
					 ctrl->val << ACCC_CHROMA_CR_SHIFT);
		break;
	case V4L2_CID_BLUE_BALANCE:
		ret = ml86v7667_mask_set(client, ACCC_REG,
					 ACCC_CHROMA_CB_MASK,
					 ctrl->val << ACCC_CHROMA_CB_SHIFT);
		break;
	case V4L2_CID_SHARPNESS:
		ret = ml86v7667_mask_set(client, LUMC_REG,
					 LUMC_ONOFF_MASK,
					 ctrl->val << LUMC_ONOFF_SHIFT);
		break;
	case V4L2_CID_COLOR_KILLER:
		ret = ml86v7667_mask_set(client, CHRCA_REG,
					 CHRCA_MODE_MASK,
					 ctrl->val << CHRCA_MODE_SHIFT);
		break;
	}

	return ret;
}

static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	int status;

	status = i2c_smbus_read_byte_data(client, STATUS_REG);
	if (status < 0)
		return status;

	if (status & STATUS_HLOCK_DETECT)
		*std &= status & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
	else
		*std = V4L2_STD_UNKNOWN;

	return 0;
}

static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	int status_reg;

	status_reg = i2c_smbus_read_byte_data(client, STATUS_REG);
	if (status_reg < 0)
		return status_reg;

	*status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL;

	return 0;
}

static int ml86v7667_enum_mbus_code(struct v4l2_subdev *sd,
		struct v4l2_subdev_pad_config *cfg,
		struct v4l2_subdev_mbus_code_enum *code)
{
	if (code->pad || code->index > 0)
		return -EINVAL;

	code->code = MEDIA_BUS_FMT_YUYV8_2X8;

	return 0;
}

static int ml86v7667_fill_fmt(struct v4l2_subdev *sd,
		struct v4l2_subdev_pad_config *cfg,
		struct v4l2_subdev_format *format)
{
	struct ml86v7667_priv *priv = to_ml86v7667(sd);
	struct v4l2_mbus_framefmt *fmt = &format->format;

	if (format->pad)
		return -EINVAL;

	fmt->code = MEDIA_BUS_FMT_YUYV8_2X8;
	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
	/* The top field is always transferred first by the chip */
	fmt->field = V4L2_FIELD_INTERLACED_TB;
	fmt->width = 720;
	fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576;

	return 0;
}

static int ml86v7667_g_mbus_config(struct v4l2_subdev *sd,
				   struct v4l2_mbus_config *cfg)
{
	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
		     V4L2_MBUS_DATA_ACTIVE_HIGH;
	cfg->type = V4L2_MBUS_BT656;

	return 0;
}

static int ml86v7667_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
{
	struct ml86v7667_priv *priv = to_ml86v7667(sd);

	*std = priv->std;

	return 0;
}

static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
	struct ml86v7667_priv *priv = to_ml86v7667(sd);
	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
	int ret;
	u8 mode;

	/* PAL/NTSC ITU-R BT.601 input mode */
	mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
	ret = ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, mode);
	if (ret < 0)
		return ret;

	priv->std = std;

	return 0;
}

#ifdef CONFIG_VIDEO_ADV_DEBUG
static int ml86v7667_g_register(struct v4l2_subdev *sd,
				struct v4l2_dbg_register *reg)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	int ret;

	ret = i2c_smbus_read_byte_data(client, (u8)reg->reg);
	if (ret < 0)
		return ret;

	reg->val = ret;
	reg->size = sizeof(u8);

	return 0;
}

static int ml86v7667_s_register(struct v4l2_subdev *sd,
				const struct v4l2_dbg_register *reg)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);

	return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val);
}
#endif

static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = {
	.s_ctrl = ml86v7667_s_ctrl,
};

static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = {
	.g_std = ml86v7667_g_std,
	.s_std = ml86v7667_s_std,
	.querystd = ml86v7667_querystd,
	.g_input_status = ml86v7667_g_input_status,
	.g_mbus_config = ml86v7667_g_mbus_config,
};

static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = {
	.enum_mbus_code = ml86v7667_enum_mbus_code,
	.get_fmt = ml86v7667_fill_fmt,
	.set_fmt = ml86v7667_fill_fmt,
};

static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = {
#ifdef CONFIG_VIDEO_ADV_DEBUG
	.g_register = ml86v7667_g_register,
	.s_register = ml86v7667_s_register,
#endif
};

static struct v4l2_subdev_ops ml86v7667_subdev_ops = {
	.core = &ml86v7667_subdev_core_ops,
	.video = &ml86v7667_subdev_video_ops,
	.pad = &ml86v7667_subdev_pad_ops,
};

static int ml86v7667_init(struct ml86v7667_priv *priv)
{
	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
	int val;
	int ret;

	/* BT.656-4 output mode, register mode */
	ret = ml86v7667_mask_set(client, MRA_REG,
				 MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE,
				 MRA_ITUR_BT656 | MRA_REGISTER_MODE);

	/* PLL circuit fixed clock, 32MHz */
	ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK,
				  PLLR1_FIXED_CLOCK);

	/* ADC2 clamping voltage maximum  */
	ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK,
				  ADC2_CLAMP_VOLTAGE(7));

	/* enable luminance function */
	ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF,
				  SSEPL_LUMINANCE_ONOFF);

	/* enable contrast function */
	ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0);

	/*
	 * PAL/NTSC autodetection is enabled after reset,
	 * set the autodetected std in manual std mode and
	 * disable autodetection
	 */
	val = i2c_smbus_read_byte_data(client, STATUS_REG);
	if (val < 0)
		return val;

	priv->std = val & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
	ret |= ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0);

	val = priv->std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
	ret |= ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, val);

	return ret;
}

static int ml86v7667_probe(struct i2c_client *client,
			   const struct i2c_device_id *did)
{
	struct ml86v7667_priv *priv;
	int ret;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
		return -EIO;

	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops);

	v4l2_ctrl_handler_init(&priv->hdl, 8);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_BRIGHTNESS, -64, 63, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_CONTRAST, -8, 7, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_HUE, -128, 127, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_RED_BALANCE, -4, 3, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_SHARPNESS, 0, 1, 1, 0);
	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
			  V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
	priv->sd.ctrl_handler = &priv->hdl;

	ret = priv->hdl.error;
	if (ret)
		goto cleanup;

	v4l2_ctrl_handler_setup(&priv->hdl);

	ret = ml86v7667_init(priv);
	if (ret)
		goto cleanup;

	v4l_info(client, "chip found @ 0x%02x (%s)\n",
		 client->addr, client->adapter->name);
	return 0;

cleanup:
	v4l2_ctrl_handler_free(&priv->hdl);
	v4l2_device_unregister_subdev(&priv->sd);
	v4l_err(client, "failed to probe @ 0x%02x (%s)\n",
		client->addr, client->adapter->name);
	return ret;
}

static int ml86v7667_remove(struct i2c_client *client)
{
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
	struct ml86v7667_priv *priv = to_ml86v7667(sd);

	v4l2_ctrl_handler_free(&priv->hdl);
	v4l2_device_unregister_subdev(&priv->sd);

	return 0;
}

static const struct i2c_device_id ml86v7667_id[] = {
	{DRV_NAME, 0},
	{},
};
MODULE_DEVICE_TABLE(i2c, ml86v7667_id);

static struct i2c_driver ml86v7667_i2c_driver = {
	.driver = {
		.name	= DRV_NAME,
	},
	.probe		= ml86v7667_probe,
	.remove		= ml86v7667_remove,
	.id_table	= ml86v7667_id,
};

module_i2c_driver(ml86v7667_i2c_driver);

MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver");
MODULE_AUTHOR("Vladimir Barinov");
MODULE_LICENSE("GPL");