arch/x86/kernel/mcount_64.S - linux-imx - Git at Google

 /*
  *  linux/arch/x86_64/mcount_64.S
  *
  *  Copyright (C) 2014  Steven Rostedt, Red Hat Inc
  */

 #include <linux/linkage.h>
 #include <asm/ptrace.h>
 #include <asm/ftrace.h>
 #include <asm/export.h>


 	.code64
 	.section .entry.text, "ax"


 #ifdef CONFIG_FUNCTION_TRACER

 #ifdef CC_USING_FENTRY
 # define function_hook	__fentry__
 EXPORT_SYMBOL(__fentry__)
 #else
 # define function_hook	mcount
 EXPORT_SYMBOL(mcount)
 #endif

 /* All cases save the original rbp (8 bytes) */
 #ifdef CONFIG_FRAME_POINTER
 # ifdef CC_USING_FENTRY
 /* Save parent and function stack frames (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16*2)
 # else
 /* Save just function stack frame (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16)
 # endif
 #else
 /* No need to save a stack frame */
 # define MCOUNT_FRAME_SIZE	8
 #endif /* CONFIG_FRAME_POINTER */

 /* Size of stack used to save mcount regs in save_mcount_regs */
 #define MCOUNT_REG_SIZE		(SS+8 + MCOUNT_FRAME_SIZE)

 /*
  * gcc -pg option adds a call to 'mcount' in most functions.
  * When -mfentry is used, the call is to 'fentry' and not 'mcount'
  * and is done before the function's stack frame is set up.
  * They both require a set of regs to be saved before calling
  * any C code and restored before returning back to the function.
  *
  * On boot up, all these calls are converted into nops. When tracing
  * is enabled, the call can jump to either ftrace_caller or
  * ftrace_regs_caller. Callbacks (tracing functions) that require
  * ftrace_regs_caller (like kprobes) need to have pt_regs passed to
  * it. For this reason, the size of the pt_regs structure will be
  * allocated on the stack and the required mcount registers will
  * be saved in the locations that pt_regs has them in.
  */

 /*
  * @added: the amount of stack added before calling this
  *
  * After this is called, the following registers contain:
  *
  *  %rdi - holds the address that called the trampoline
  *  %rsi - holds the parent function (traced function's return address)
  *  %rdx - holds the original %rbp
  */
 .macro save_mcount_regs added=0

 	/* Always save the original rbp */
 	pushq %rbp

 #ifdef CONFIG_FRAME_POINTER
 	/*
 	 * Stack traces will stop at the ftrace trampoline if the frame pointer
 	 * is not set up properly. If fentry is used, we need to save a frame
 	 * pointer for the parent as well as the function traced, because the
 	 * fentry is called before the stack frame is set up, where as mcount
 	 * is called afterward.
 	 */
 #ifdef CC_USING_FENTRY
 	/* Save the parent pointer (skip orig rbp and our return address) */
 	pushq \added+8*2(%rsp)
 	pushq %rbp
 	movq %rsp, %rbp
 	/* Save the return address (now skip orig rbp, rbp and parent) */
 	pushq \added+8*3(%rsp)
 #else
 	/* Can't assume that rip is before this (unless added was zero) */
 	pushq \added+8(%rsp)
 #endif
 	pushq %rbp
 	movq %rsp, %rbp
 #endif /* CONFIG_FRAME_POINTER */

 	/*
 	 * We add enough stack to save all regs.
 	 */
 	subq $(MCOUNT_REG_SIZE - MCOUNT_FRAME_SIZE), %rsp
 	movq %rax, RAX(%rsp)
 	movq %rcx, RCX(%rsp)
 	movq %rdx, RDX(%rsp)
 	movq %rsi, RSI(%rsp)
 	movq %rdi, RDI(%rsp)
 	movq %r8, R8(%rsp)
 	movq %r9, R9(%rsp)
 	/*
 	 * Save the original RBP. Even though the mcount ABI does not
 	 * require this, it helps out callers.
 	 */
 	movq MCOUNT_REG_SIZE-8(%rsp), %rdx
 	movq %rdx, RBP(%rsp)

 	/* Copy the parent address into %rsi (second parameter) */
 #ifdef CC_USING_FENTRY
 	movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
 #else
 	/* %rdx contains original %rbp */
 	movq 8(%rdx), %rsi
 #endif

 	 /* Move RIP to its proper location */
 	movq MCOUNT_REG_SIZE+\added(%rsp), %rdi
 	movq %rdi, RIP(%rsp)

 	/*
 	 * Now %rdi (the first parameter) has the return address of
 	 * where ftrace_call returns. But the callbacks expect the
 	 * address of the call itself.
 	 */
 	subq $MCOUNT_INSN_SIZE, %rdi
 	.endm

 .macro restore_mcount_regs
 	movq R9(%rsp), %r9
 	movq R8(%rsp), %r8
 	movq RDI(%rsp), %rdi
 	movq RSI(%rsp), %rsi
 	movq RDX(%rsp), %rdx
 	movq RCX(%rsp), %rcx
 	movq RAX(%rsp), %rax

 	/* ftrace_regs_caller can modify %rbp */
 	movq RBP(%rsp), %rbp

 	addq $MCOUNT_REG_SIZE, %rsp

 	.endm

 #ifdef CONFIG_DYNAMIC_FTRACE

 ENTRY(function_hook)
 	retq
 END(function_hook)

 ENTRY(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
 	save_mcount_regs

 GLOBAL(ftrace_caller_op_ptr)
 	/* Load the ftrace_ops into the 3rd parameter */
 	movq function_trace_op(%rip), %rdx

 	/* regs go into 4th parameter (but make it NULL) */
 	movq $0, %rcx

 GLOBAL(ftrace_call)
 	call ftrace_stub

 	restore_mcount_regs

 	/*
 	 * The copied trampoline must call ftrace_epilogue as it
 	 * still may need to call the function graph tracer.
 	 *
 	 * The code up to this label is copied into trampolines so
 	 * think twice before adding any new code or changing the
 	 * layout here.
 	 */
 GLOBAL(ftrace_epilogue)

 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 GLOBAL(ftrace_graph_call)
 	jmp ftrace_stub
 #endif

 /* This is weak to keep gas from relaxing the jumps */
 WEAK(ftrace_stub)
 	retq
 END(ftrace_caller)

 ENTRY(ftrace_regs_caller)
 	/* Save the current flags before any operations that can change them */
 	pushfq

 	/* added 8 bytes to save flags */
 	save_mcount_regs 8
 	/* save_mcount_regs fills in first two parameters */

 GLOBAL(ftrace_regs_caller_op_ptr)
 	/* Load the ftrace_ops into the 3rd parameter */
 	movq function_trace_op(%rip), %rdx

 	/* Save the rest of pt_regs */
 	movq %r15, R15(%rsp)
 	movq %r14, R14(%rsp)
 	movq %r13, R13(%rsp)
 	movq %r12, R12(%rsp)
 	movq %r11, R11(%rsp)
 	movq %r10, R10(%rsp)
 	movq %rbx, RBX(%rsp)
 	/* Copy saved flags */
 	movq MCOUNT_REG_SIZE(%rsp), %rcx
 	movq %rcx, EFLAGS(%rsp)
 	/* Kernel segments */
 	movq $__KERNEL_DS, %rcx
 	movq %rcx, SS(%rsp)
 	movq $__KERNEL_CS, %rcx
 	movq %rcx, CS(%rsp)
 	/* Stack - skipping return address and flags */
 	leaq MCOUNT_REG_SIZE+8*2(%rsp), %rcx
 	movq %rcx, RSP(%rsp)

 	/* regs go into 4th parameter */
 	leaq (%rsp), %rcx

 GLOBAL(ftrace_regs_call)
 	call ftrace_stub

 	/* Copy flags back to SS, to restore them */
 	movq EFLAGS(%rsp), %rax
 	movq %rax, MCOUNT_REG_SIZE(%rsp)

 	/* Handlers can change the RIP */
 	movq RIP(%rsp), %rax
 	movq %rax, MCOUNT_REG_SIZE+8(%rsp)

 	/* restore the rest of pt_regs */
 	movq R15(%rsp), %r15
 	movq R14(%rsp), %r14
 	movq R13(%rsp), %r13
 	movq R12(%rsp), %r12
 	movq R10(%rsp), %r10
 	movq RBX(%rsp), %rbx

 	restore_mcount_regs

 	/* Restore flags */
 	popfq

 	/*
 	 * As this jmp to ftrace_epilogue can be a short jump
 	 * it must not be copied into the trampoline.
 	 * The trampoline will add the code to jump
 	 * to the return.
 	 */
 GLOBAL(ftrace_regs_caller_end)

 	jmp ftrace_epilogue

 END(ftrace_regs_caller)


 #else /* ! CONFIG_DYNAMIC_FTRACE */

 ENTRY(function_hook)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace

 fgraph_trace:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	cmpq $ftrace_stub, ftrace_graph_return
 	jnz ftrace_graph_caller

 	cmpq $ftrace_graph_entry_stub, ftrace_graph_entry
 	jnz ftrace_graph_caller
 #endif

 GLOBAL(ftrace_stub)
 	retq

 trace:
 	/* save_mcount_regs fills in first two parameters */
 	save_mcount_regs

 	/*
 	 * When DYNAMIC_FTRACE is not defined, ARCH_SUPPORTS_FTRACE_OPS is not
 	 * set (see include/asm/ftrace.h and include/linux/ftrace.h).  Only the
 	 * ip and parent ip are used and the list function is called when
 	 * function tracing is enabled.
 	 */
 	call   *ftrace_trace_function

 	restore_mcount_regs

 	jmp fgraph_trace
 END(function_hook)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_TRACER */

 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
 	/* Saves rbp into %rdx and fills first parameter  */
 	save_mcount_regs

 #ifdef CC_USING_FENTRY
 	leaq MCOUNT_REG_SIZE+8(%rsp), %rsi
 	movq $0, %rdx	/* No framepointers needed */
 #else
 	/* Save address of the return address of traced function */
 	leaq 8(%rdx), %rsi
 	/* ftrace does sanity checks against frame pointers */
 	movq (%rdx), %rdx
 #endif
 	call	prepare_ftrace_return

 	restore_mcount_regs

 	retq
 END(ftrace_graph_caller)

 GLOBAL(return_to_handler)
 	subq  $24, %rsp

 	/* Save the return values */
 	movq %rax, (%rsp)
 	movq %rdx, 8(%rsp)
 	movq %rbp, %rdi

 	call ftrace_return_to_handler

 	movq %rax, %rdi
 	movq 8(%rsp), %rdx
 	movq (%rsp), %rax
 	addq $24, %rsp
 	jmp *%rdi
 #endif
	/*
	* linux/arch/x86_64/mcount_64.S
	*
	* Copyright (C) 2014 Steven Rostedt, Red Hat Inc
	*/

	#include <linux/linkage.h>
	#include <asm/ptrace.h>
	#include <asm/ftrace.h>
	#include <asm/export.h>


	.code64
	.section .entry.text, "ax"


	#ifdef CONFIG_FUNCTION_TRACER

	#ifdef CC_USING_FENTRY
	# define function_hook __fentry__
	EXPORT_SYMBOL(__fentry__)
	#else
	# define function_hook mcount
	EXPORT_SYMBOL(mcount)
	#endif

	/* All cases save the original rbp (8 bytes) */
	#ifdef CONFIG_FRAME_POINTER
	# ifdef CC_USING_FENTRY
	/* Save parent and function stack frames (rip and rbp) */
	# define MCOUNT_FRAME_SIZE (8+16*2)
	# else
	/* Save just function stack frame (rip and rbp) */
	# define MCOUNT_FRAME_SIZE (8+16)
	# endif
	#else
	/* No need to save a stack frame */
	# define MCOUNT_FRAME_SIZE 8
	#endif /* CONFIG_FRAME_POINTER */

	/* Size of stack used to save mcount regs in save_mcount_regs */
	#define MCOUNT_REG_SIZE (SS+8 + MCOUNT_FRAME_SIZE)

	/*
	* gcc -pg option adds a call to 'mcount' in most functions.
	* When -mfentry is used, the call is to 'fentry' and not 'mcount'
	* and is done before the function's stack frame is set up.
	* They both require a set of regs to be saved before calling
	* any C code and restored before returning back to the function.
	*
	* On boot up, all these calls are converted into nops. When tracing
	* is enabled, the call can jump to either ftrace_caller or
	* ftrace_regs_caller. Callbacks (tracing functions) that require
	* ftrace_regs_caller (like kprobes) need to have pt_regs passed to
	* it. For this reason, the size of the pt_regs structure will be
	* allocated on the stack and the required mcount registers will
	* be saved in the locations that pt_regs has them in.
	*/

	/*
	* @added: the amount of stack added before calling this
	*
	* After this is called, the following registers contain:
	*
	* %rdi - holds the address that called the trampoline
	* %rsi - holds the parent function (traced function's return address)
	* %rdx - holds the original %rbp
	*/
	.macro save_mcount_regs added=0

	/* Always save the original rbp */
	pushq %rbp

	#ifdef CONFIG_FRAME_POINTER
	/*
	* Stack traces will stop at the ftrace trampoline if the frame pointer
	* is not set up properly. If fentry is used, we need to save a frame
	* pointer for the parent as well as the function traced, because the
	* fentry is called before the stack frame is set up, where as mcount
	* is called afterward.
	*/
	#ifdef CC_USING_FENTRY
	/* Save the parent pointer (skip orig rbp and our return address) */
	pushq \added+8*2(%rsp)
	pushq %rbp
	movq %rsp, %rbp
	/* Save the return address (now skip orig rbp, rbp and parent) */
	pushq \added+8*3(%rsp)
	#else
	/* Can't assume that rip is before this (unless added was zero) */
	pushq \added+8(%rsp)
	#endif
	pushq %rbp
	movq %rsp, %rbp
	#endif /* CONFIG_FRAME_POINTER */

	/*
	* We add enough stack to save all regs.
	*/
	subq $(MCOUNT_REG_SIZE - MCOUNT_FRAME_SIZE), %rsp
	movq %rax, RAX(%rsp)
	movq %rcx, RCX(%rsp)
	movq %rdx, RDX(%rsp)
	movq %rsi, RSI(%rsp)
	movq %rdi, RDI(%rsp)
	movq %r8, R8(%rsp)
	movq %r9, R9(%rsp)
	/*
	* Save the original RBP. Even though the mcount ABI does not
	* require this, it helps out callers.
	*/
	movq MCOUNT_REG_SIZE-8(%rsp), %rdx
	movq %rdx, RBP(%rsp)

	/* Copy the parent address into %rsi (second parameter) */
	#ifdef CC_USING_FENTRY
	movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
	#else
	/* %rdx contains original %rbp */
	movq 8(%rdx), %rsi
	#endif

	/* Move RIP to its proper location */
	movq MCOUNT_REG_SIZE+\added(%rsp), %rdi
	movq %rdi, RIP(%rsp)

	/*
	* Now %rdi (the first parameter) has the return address of
	* where ftrace_call returns. But the callbacks expect the
	* address of the call itself.
	*/
	subq $MCOUNT_INSN_SIZE, %rdi
	.endm

	.macro restore_mcount_regs
	movq R9(%rsp), %r9
	movq R8(%rsp), %r8
	movq RDI(%rsp), %rdi
	movq RSI(%rsp), %rsi
	movq RDX(%rsp), %rdx
	movq RCX(%rsp), %rcx
	movq RAX(%rsp), %rax

	/* ftrace_regs_caller can modify %rbp */
	movq RBP(%rsp), %rbp

	addq $MCOUNT_REG_SIZE, %rsp

	.endm

	#ifdef CONFIG_DYNAMIC_FTRACE

	ENTRY(function_hook)
	retq
	END(function_hook)

	ENTRY(ftrace_caller)
	/* save_mcount_regs fills in first two parameters */
	save_mcount_regs

	GLOBAL(ftrace_caller_op_ptr)
	/* Load the ftrace_ops into the 3rd parameter */
	movq function_trace_op(%rip), %rdx

	/* regs go into 4th parameter (but make it NULL) */
	movq $0, %rcx

	GLOBAL(ftrace_call)
	call ftrace_stub

	restore_mcount_regs

	/*
	* The copied trampoline must call ftrace_epilogue as it
	* still may need to call the function graph tracer.
	*
	* The code up to this label is copied into trampolines so
	* think twice before adding any new code or changing the
	* layout here.
	*/
	GLOBAL(ftrace_epilogue)

	#ifdef CONFIG_FUNCTION_GRAPH_TRACER
	GLOBAL(ftrace_graph_call)
	jmp ftrace_stub
	#endif

	/* This is weak to keep gas from relaxing the jumps */
	WEAK(ftrace_stub)
	retq
	END(ftrace_caller)

	ENTRY(ftrace_regs_caller)
	/* Save the current flags before any operations that can change them */
	pushfq

	/* added 8 bytes to save flags */
	save_mcount_regs 8
	/* save_mcount_regs fills in first two parameters */

	GLOBAL(ftrace_regs_caller_op_ptr)
	/* Load the ftrace_ops into the 3rd parameter */
	movq function_trace_op(%rip), %rdx

	/* Save the rest of pt_regs */
	movq %r15, R15(%rsp)
	movq %r14, R14(%rsp)
	movq %r13, R13(%rsp)
	movq %r12, R12(%rsp)
	movq %r11, R11(%rsp)
	movq %r10, R10(%rsp)
	movq %rbx, RBX(%rsp)
	/* Copy saved flags */
	movq MCOUNT_REG_SIZE(%rsp), %rcx
	movq %rcx, EFLAGS(%rsp)
	/* Kernel segments */
	movq $__KERNEL_DS, %rcx
	movq %rcx, SS(%rsp)
	movq $__KERNEL_CS, %rcx
	movq %rcx, CS(%rsp)
	/* Stack - skipping return address and flags */
	leaq MCOUNT_REG_SIZE+8*2(%rsp), %rcx
	movq %rcx, RSP(%rsp)

	/* regs go into 4th parameter */
	leaq (%rsp), %rcx

	GLOBAL(ftrace_regs_call)
	call ftrace_stub

	/* Copy flags back to SS, to restore them */
	movq EFLAGS(%rsp), %rax
	movq %rax, MCOUNT_REG_SIZE(%rsp)

	/* Handlers can change the RIP */
	movq RIP(%rsp), %rax
	movq %rax, MCOUNT_REG_SIZE+8(%rsp)

	/* restore the rest of pt_regs */
	movq R15(%rsp), %r15
	movq R14(%rsp), %r14
	movq R13(%rsp), %r13
	movq R12(%rsp), %r12
	movq R10(%rsp), %r10
	movq RBX(%rsp), %rbx

	restore_mcount_regs

	/* Restore flags */
	popfq

	/*
	* As this jmp to ftrace_epilogue can be a short jump
	* it must not be copied into the trampoline.
	* The trampoline will add the code to jump
	* to the return.
	*/
	GLOBAL(ftrace_regs_caller_end)

	jmp ftrace_epilogue

	END(ftrace_regs_caller)


	#else /* ! CONFIG_DYNAMIC_FTRACE */

	ENTRY(function_hook)
	cmpq $ftrace_stub, ftrace_trace_function
	jnz trace

	fgraph_trace:
	#ifdef CONFIG_FUNCTION_GRAPH_TRACER
	cmpq $ftrace_stub, ftrace_graph_return
	jnz ftrace_graph_caller

	cmpq $ftrace_graph_entry_stub, ftrace_graph_entry
	jnz ftrace_graph_caller
	#endif

	GLOBAL(ftrace_stub)
	retq

	trace:
	/* save_mcount_regs fills in first two parameters */
	save_mcount_regs

	/*
	* When DYNAMIC_FTRACE is not defined, ARCH_SUPPORTS_FTRACE_OPS is not
	* set (see include/asm/ftrace.h and include/linux/ftrace.h). Only the
	* ip and parent ip are used and the list function is called when
	* function tracing is enabled.
	*/
	call *ftrace_trace_function

	restore_mcount_regs

	jmp fgraph_trace
	END(function_hook)
	#endif /* CONFIG_DYNAMIC_FTRACE */
	#endif /* CONFIG_FUNCTION_TRACER */

	#ifdef CONFIG_FUNCTION_GRAPH_TRACER
	ENTRY(ftrace_graph_caller)
	/* Saves rbp into %rdx and fills first parameter */
	save_mcount_regs

	#ifdef CC_USING_FENTRY
	leaq MCOUNT_REG_SIZE+8(%rsp), %rsi
	movq $0, %rdx /* No framepointers needed */
	#else
	/* Save address of the return address of traced function */
	leaq 8(%rdx), %rsi
	/* ftrace does sanity checks against frame pointers */
	movq (%rdx), %rdx
	#endif
	call prepare_ftrace_return

	restore_mcount_regs

	retq
	END(ftrace_graph_caller)

	GLOBAL(return_to_handler)
	subq $24, %rsp

	/* Save the return values */
	movq %rax, (%rsp)
	movq %rdx, 8(%rsp)
	movq %rbp, %rdi

	call ftrace_return_to_handler

	movq %rax, %rdi
	movq 8(%rsp), %rdx
	movq (%rsp), %rax
	addq $24, %rsp
	jmp *%rdi
	#endif