blob: 6f8af2bcc7b77110298b45c7d178066c44abca7d [file] [log] [blame] [edit]
MediaTek display PWM controller
Required properties:
- compatible: should be "mediatek,<name>-disp-pwm":
- "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
- "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
- "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
- reg: physical base address and length of the controller's registers.
- #pwm-cells: must be 2. See pwm.txt in this directory for a description of
the cell format.
- clocks: phandle and clock specifier of the PWM reference clock.
- clock-names: must contain the following:
- "main": clock used to generate PWM signals.
- "mm": sync signals from the modules of mmsys.
- pinctrl-names: Must contain a "default" entry.
- pinctrl-0: One property must exist for each entry in pinctrl-names.
See pinctrl/pinctrl-bindings.txt for details of the property values.
Example:
pwm0: pwm@1401e000 {
compatible = "mediatek,mt8173-disp-pwm",
"mediatek,mt6595-disp-pwm";
reg = <0 0x1401e000 0 0x1000>;
#pwm-cells = <2>;
clocks = <&mmsys CLK_MM_DISP_PWM026M>,
<&mmsys CLK_MM_DISP_PWM0MM>;
clock-names = "main", "mm";
pinctrl-names = "default";
pinctrl-0 = <&disp_pwm0_pins>;
};
backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm0 0 1000000>;
brightness-levels = <
0 16 32 48 64 80 96 112
128 144 160 176 192 208 224 240
255
>;
default-brightness-level = <9>;
power-supply = <&mt6397_vio18_reg>;
enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
};