drivers/usb/serial/keyspan_usa28msg.h - linux-imx - Git at Google

 /*
 	usa28msg.h

 	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved
 	This file is available under a BSD-style copyright

 	Keyspan USB Async Message Formats for the USA26X

 	Redistribution and use in source and binary forms, with or without
 	modification, are permitted provided that the following conditions are
 	met:

 	1. Redistributions of source code must retain this licence text
    	without modification, this list of conditions, and the following
    	disclaimer.  The following copyright notice must appear immediately at
    	the beginning of all source files:

         	Copyright (C) 1998-2000 InnoSys Incorporated.  All Rights Reserved

         	This file is available under a BSD-style copyright

 	2. The name of InnoSys Incorporated may not be used to endorse or promote
    	products derived from this software without specific prior written
    	permission.

 	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
 	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
 	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 	SUCH DAMAGE.

 	Note: these message formats are common to USA18, USA19, and USA28;
 	(for USA28X, see usa26msg.h)

 	Buffer formats for RX/TX data messages are not defined by
 	a structure, but are described here:

 	USB OUT (host -> USA28, transmit) messages contain a
 	REQUEST_ACK indicator (set to 0xff to request an ACK at the
 	completion of transmit; 0x00 otherwise), followed by data.
 	If the port is configured for parity, the data will be an
 	alternating string of parity and data bytes, so the message
 	format will be:

 		RQSTACK PAR DAT PAR DAT ...

 	so the maximum length is 63 bytes (1 + 62, or 31 data bytes);
 	always an odd number for the total message length.

 	If there is no parity, the format is simply:

 		RQSTACK DAT DAT DAT ...

 	with a total data length of 63.

 	USB IN (USA28 -> host, receive) messages contain data and parity
 	if parity is configred, thusly:

 		DAT PAR DAT PAR DAT PAR ...

 	for a total of 32 data bytes;

 	If parity is not configured, the format is:

 		DAT DAT DAT ...

 	for a total of 64 data bytes.

 	In the TX messages (USB OUT), the 0x01 bit of the PARity byte is
 	the parity bit.  In the RX messages (USB IN), the PARity byte is
 	the content of the 8051's status register; the parity bit
 	(RX_PARITY_BIT) is the 0x04 bit.

 	revision history:

 	1999may06	add resetDataToggle to control message
 	2000mar21	add rs232invalid to status response message
 	2000apr04	add 230.4Kb definition to setBaudRate
 	2000apr13	add/remove loopbackMode switch
 	2000apr13	change definition of setBaudRate to cover 115.2Kb, too
 	2000jun01	add extended BSD-style copyright text
 */

 #ifndef	__USA28MSG__
 #define	__USA28MSG__


 struct keyspan_usa28_portControlMessage
 {
 	/*
 		there are four types of "commands" sent in the control message:

 		1.	configuration changes which must be requested by setting
 			the corresponding "set" flag (and should only be requested
 			when necessary, to reduce overhead on the USA28):
 	*/
 	u8	setBaudRate,	// 0=don't set, 1=baudLo/Hi, 2=115.2K, 3=230.4K
 		baudLo,			// host does baud divisor calculation
 		baudHi;			// baudHi is only used for first port (gives lower rates)

 	/*
 		2.	configuration changes which are done every time (because it's
 			hardly more trouble to do them than to check whether to do them):
 	*/
 	u8	parity,			// 1=use parity, 0=don't
 		ctsFlowControl,	        // all except 19Q: 1=use CTS flow control, 0=don't
 					// 19Q: 0x08:CTSflowControl 0x10:DSRflowControl
 		xonFlowControl,	// 1=use XON/XOFF flow control, 0=don't
 		rts,			// 1=on, 0=off
 		dtr;			// 1=on, 0=off

 	/*
 		3.	configuration data which is simply used as is (no overhead,
 			but must be correct in every host message).
 	*/
 	u8	forwardingLength,  // forward when this number of chars available
 		forwardMs,		// forward this many ms after last rx data
 		breakThreshold,	// specified in ms, 1-255 (see note below)
 		xonChar,		// specified in current character format
 		xoffChar;		// specified in current character format

 	/*
 		4.	commands which are flags only; these are processed in order
 			(so that, e.g., if both _txOn and _txOff flags are set, the
 			port ends in a TX_OFF state); any non-zero value is respected
 	*/
 	u8	_txOn,			// enable transmitting (and continue if there's data)
 		_txOff,			// stop transmitting
 		txFlush,		// toss outbound data
 		txForceXoff,	// pretend we've received XOFF
 		txBreak,		// turn on break (leave on until txOn clears it)
 		rxOn,			// turn on receiver
 		rxOff,			// turn off receiver
 		rxFlush,		// toss inbound data
 		rxForward,		// forward all inbound data, NOW
 		returnStatus,	// return current status n times (1 or 2)
 		resetDataToggle;// reset data toggle state to DATA0

 };

 struct keyspan_usa28_portStatusMessage
 {
 	u8	port,			// 0=first, 1=second, 2=global (see below)
 		cts,
 		dsr,			// (not used in all products)
 		dcd,

 		ri,				// (not used in all products)
 		_txOff,			// port has been disabled (by host)
 		_txXoff,		// port is in XOFF state (either host or RX XOFF)
 		dataLost,		// count of lost chars; wraps; not guaranteed exact

 		rxEnabled,		// as configured by rxOn/rxOff 1=on, 0=off
 		rxBreak,		// 1=we're in break state
 		rs232invalid,	// 1=no valid signals on rs-232 inputs
 		controlResponse;// 1=a control messages has been processed
 };

 // bit defines in txState
 #define	TX_OFF			0x01	// requested by host txOff command
 #define	TX_XOFF			0x02	// either real, or simulated by host

 struct keyspan_usa28_globalControlMessage
 {
 	u8	sendGlobalStatus,	// 2=request for two status responses
 		resetStatusToggle,	// 1=reset global status toggle
 		resetStatusCount;	// a cycling value
 };

 struct keyspan_usa28_globalStatusMessage
 {
 	u8	port,				// 3
 		sendGlobalStatus,	// from request, decremented
 		resetStatusCount;	// as in request
 };

 struct keyspan_usa28_globalDebugMessage
 {
 	u8	port,				// 2
 		n,					// typically a count/status byte
 		b;					// typically a data byte
 };

 // ie: the maximum length of an EZUSB endpoint buffer
 #define	MAX_DATA_LEN			64

 // the parity bytes have only one significant bit
 #define	RX_PARITY_BIT			0x04
 #define	TX_PARITY_BIT			0x01

 // update status approx. 60 times a second (16.6666 ms)
 #define	STATUS_UPDATE_INTERVAL	16

 #endif
	/*
	usa28msg.h

	Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved
	This file is available under a BSD-style copyright

	Keyspan USB Async Message Formats for the USA26X

	Redistribution and use in source and binary forms, with or without
	modification, are permitted provided that the following conditions are
	met:

	1. Redistributions of source code must retain this licence text
	without modification, this list of conditions, and the following
	disclaimer. The following copyright notice must appear immediately at
	the beginning of all source files:

	Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved

	This file is available under a BSD-style copyright

	2. The name of InnoSys Incorporated may not be used to endorse or promote
	products derived from this software without specific prior written
	permission.

	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
	SUCH DAMAGE.

	Note: these message formats are common to USA18, USA19, and USA28;
	(for USA28X, see usa26msg.h)

	Buffer formats for RX/TX data messages are not defined by
	a structure, but are described here:

	USB OUT (host -> USA28, transmit) messages contain a
	REQUEST_ACK indicator (set to 0xff to request an ACK at the
	completion of transmit; 0x00 otherwise), followed by data.
	If the port is configured for parity, the data will be an
	alternating string of parity and data bytes, so the message
	format will be:

	RQSTACK PAR DAT PAR DAT ...

	so the maximum length is 63 bytes (1 + 62, or 31 data bytes);
	always an odd number for the total message length.

	If there is no parity, the format is simply:

	RQSTACK DAT DAT DAT ...

	with a total data length of 63.

	USB IN (USA28 -> host, receive) messages contain data and parity
	if parity is configred, thusly:

	DAT PAR DAT PAR DAT PAR ...

	for a total of 32 data bytes;

	If parity is not configured, the format is:

	DAT DAT DAT ...

	for a total of 64 data bytes.

	In the TX messages (USB OUT), the 0x01 bit of the PARity byte is
	the parity bit. In the RX messages (USB IN), the PARity byte is
	the content of the 8051's status register; the parity bit
	(RX_PARITY_BIT) is the 0x04 bit.

	revision history:

	1999may06 add resetDataToggle to control message
	2000mar21 add rs232invalid to status response message
	2000apr04 add 230.4Kb definition to setBaudRate
	2000apr13 add/remove loopbackMode switch
	2000apr13 change definition of setBaudRate to cover 115.2Kb, too
	2000jun01 add extended BSD-style copyright text
	*/

	#ifndef __USA28MSG__
	#define __USA28MSG__


	struct keyspan_usa28_portControlMessage
	{
	/*
	there are four types of "commands" sent in the control message:

	1. configuration changes which must be requested by setting
	the corresponding "set" flag (and should only be requested
	when necessary, to reduce overhead on the USA28):
	*/
	u8 setBaudRate, // 0=don't set, 1=baudLo/Hi, 2=115.2K, 3=230.4K
	baudLo, // host does baud divisor calculation
	baudHi; // baudHi is only used for first port (gives lower rates)

	/*
	2. configuration changes which are done every time (because it's
	hardly more trouble to do them than to check whether to do them):
	*/
	u8 parity, // 1=use parity, 0=don't
	ctsFlowControl, // all except 19Q: 1=use CTS flow control, 0=don't
	// 19Q: 0x08:CTSflowControl 0x10:DSRflowControl
	xonFlowControl, // 1=use XON/XOFF flow control, 0=don't
	rts, // 1=on, 0=off
	dtr; // 1=on, 0=off

	/*
	3. configuration data which is simply used as is (no overhead,
	but must be correct in every host message).
	*/
	u8 forwardingLength, // forward when this number of chars available
	forwardMs, // forward this many ms after last rx data
	breakThreshold, // specified in ms, 1-255 (see note below)
	xonChar, // specified in current character format
	xoffChar; // specified in current character format

	/*
	4. commands which are flags only; these are processed in order
	(so that, e.g., if both _txOn and _txOff flags are set, the
	port ends in a TX_OFF state); any non-zero value is respected
	*/
	u8 _txOn, // enable transmitting (and continue if there's data)
	_txOff, // stop transmitting
	txFlush, // toss outbound data
	txForceXoff, // pretend we've received XOFF
	txBreak, // turn on break (leave on until txOn clears it)
	rxOn, // turn on receiver
	rxOff, // turn off receiver
	rxFlush, // toss inbound data
	rxForward, // forward all inbound data, NOW
	returnStatus, // return current status n times (1 or 2)
	resetDataToggle;// reset data toggle state to DATA0

	};

	struct keyspan_usa28_portStatusMessage
	{
	u8 port, // 0=first, 1=second, 2=global (see below)
	cts,
	dsr, // (not used in all products)
	dcd,

	ri, // (not used in all products)
	_txOff, // port has been disabled (by host)
	_txXoff, // port is in XOFF state (either host or RX XOFF)
	dataLost, // count of lost chars; wraps; not guaranteed exact

	rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off
	rxBreak, // 1=we're in break state
	rs232invalid, // 1=no valid signals on rs-232 inputs
	controlResponse;// 1=a control messages has been processed
	};

	// bit defines in txState
	#define TX_OFF 0x01 // requested by host txOff command
	#define TX_XOFF 0x02 // either real, or simulated by host

	struct keyspan_usa28_globalControlMessage
	{
	u8 sendGlobalStatus, // 2=request for two status responses
	resetStatusToggle, // 1=reset global status toggle
	resetStatusCount; // a cycling value
	};

	struct keyspan_usa28_globalStatusMessage
	{
	u8 port, // 3
	sendGlobalStatus, // from request, decremented
	resetStatusCount; // as in request
	};

	struct keyspan_usa28_globalDebugMessage
	{
	u8 port, // 2
	n, // typically a count/status byte
	b; // typically a data byte
	};

	// ie: the maximum length of an EZUSB endpoint buffer
	#define MAX_DATA_LEN 64

	// the parity bytes have only one significant bit
	#define RX_PARITY_BIT 0x04
	#define TX_PARITY_BIT 0x01

	// update status approx. 60 times a second (16.6666 ms)
	#define STATUS_UPDATE_INTERVAL 16

	#endif