blob: 4faea1d9facf1058d6bdcc073a9eafabda893163 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
/ {
model = "QNAP TS219 family";
compatible = "qnap,ts219", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
ocp@f1000000 {
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
s35390a: s35390a@30 {
compatible = "s35390a";
reg = <0x30>;
};
};
serial@12000 {
status = "okay";
};
serial@12100 {
status = "okay";
};
poweroff@12100 {
compatible = "qnap,power-off";
reg = <0x12100 0x100>;
clocks = <&gate_clk 7>;
};
spi@10600 {
status = "okay";
m25p128@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
partition@0000000 {
reg = <0x00000000 0x00080000>;
label = "U-Boot";
};
partition@00200000 {
reg = <0x00200000 0x00200000>;
label = "Kernel";
};
partition@00400000 {
reg = <0x00400000 0x00900000>;
label = "RootFS1";
};
partition@00d00000 {
reg = <0x00d00000 0x00300000>;
label = "RootFS2";
};
partition@00040000 {
reg = <0x00080000 0x00040000>;
label = "U-Boot Config";
};
partition@000c0000 {
reg = <0x000c0000 0x00140000>;
label = "NAS Config";
};
};
};
sata@80000 {
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
pinctrl-names = "default";
status = "okay";
nr-ports = <2>;
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@X {
/* overwrite reg property in board file */
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};