|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * SAMSUNG EXYNOS USB HOST EHCI Controller | 
|  | * | 
|  | * Copyright (C) 2011 Samsung Electronics Co.Ltd | 
|  | * Author: Jingoo Han <jg1.han@samsung.com> | 
|  | * Author: Joonyoung Shim <jy0922.shim@samsung.com> | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/phy/phy.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/hcd.h> | 
|  |  | 
|  | #include "ehci.h" | 
|  |  | 
|  | #define DRIVER_DESC "EHCI EXYNOS driver" | 
|  |  | 
|  | #define EHCI_INSNREG00(base)			(base + 0x90) | 
|  | #define EHCI_INSNREG00_ENA_INCR16		(0x1 << 25) | 
|  | #define EHCI_INSNREG00_ENA_INCR8		(0x1 << 24) | 
|  | #define EHCI_INSNREG00_ENA_INCR4		(0x1 << 23) | 
|  | #define EHCI_INSNREG00_ENA_INCRX_ALIGN		(0x1 << 22) | 
|  | #define EHCI_INSNREG00_ENABLE_DMA_BURST	\ | 
|  | (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 |	\ | 
|  | EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) | 
|  |  | 
|  | static const char hcd_name[] = "ehci-exynos"; | 
|  | static struct hc_driver __read_mostly exynos_ehci_hc_driver; | 
|  |  | 
|  | #define PHY_NUMBER 3 | 
|  |  | 
|  | struct exynos_ehci_hcd { | 
|  | struct clk *clk; | 
|  | struct phy *phy[PHY_NUMBER]; | 
|  | }; | 
|  |  | 
|  | #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) | 
|  |  | 
|  | static int exynos_ehci_get_phy(struct device *dev, | 
|  | struct exynos_ehci_hcd *exynos_ehci) | 
|  | { | 
|  | struct device_node *child; | 
|  | struct phy *phy; | 
|  | int phy_number; | 
|  | int ret; | 
|  |  | 
|  | /* Get PHYs for the controller */ | 
|  | for_each_available_child_of_node(dev->of_node, child) { | 
|  | ret = of_property_read_u32(child, "reg", &phy_number); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to parse device tree\n"); | 
|  | of_node_put(child); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (phy_number >= PHY_NUMBER) { | 
|  | dev_err(dev, "Invalid number of PHYs\n"); | 
|  | of_node_put(child); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | phy = devm_of_phy_get(dev, child, NULL); | 
|  | exynos_ehci->phy[phy_number] = phy; | 
|  | if (IS_ERR(phy)) { | 
|  | ret = PTR_ERR(phy); | 
|  | if (ret == -EPROBE_DEFER) { | 
|  | of_node_put(child); | 
|  | return ret; | 
|  | } else if (ret != -ENOSYS && ret != -ENODEV) { | 
|  | dev_err(dev, | 
|  | "Error retrieving usb2 phy: %d\n", ret); | 
|  | of_node_put(child); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int exynos_ehci_phy_enable(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); | 
|  | int i; | 
|  | int ret = 0; | 
|  |  | 
|  | for (i = 0; ret == 0 && i < PHY_NUMBER; i++) | 
|  | if (!IS_ERR(exynos_ehci->phy[i])) | 
|  | ret = phy_power_on(exynos_ehci->phy[i]); | 
|  | if (ret) | 
|  | for (i--; i >= 0; i--) | 
|  | if (!IS_ERR(exynos_ehci->phy[i])) | 
|  | phy_power_off(exynos_ehci->phy[i]); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void exynos_ehci_phy_disable(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < PHY_NUMBER; i++) | 
|  | if (!IS_ERR(exynos_ehci->phy[i])) | 
|  | phy_power_off(exynos_ehci->phy[i]); | 
|  | } | 
|  |  | 
|  | static void exynos_setup_vbus_gpio(struct device *dev) | 
|  | { | 
|  | int err; | 
|  | int gpio; | 
|  |  | 
|  | if (!dev->of_node) | 
|  | return; | 
|  |  | 
|  | gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0); | 
|  | if (!gpio_is_valid(gpio)) | 
|  | return; | 
|  |  | 
|  | err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, | 
|  | "ehci_vbus_gpio"); | 
|  | if (err) | 
|  | dev_err(dev, "can't request ehci vbus gpio %d", gpio); | 
|  | } | 
|  |  | 
|  | static int exynos_ehci_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct exynos_ehci_hcd *exynos_ehci; | 
|  | struct usb_hcd *hcd; | 
|  | struct ehci_hcd *ehci; | 
|  | struct resource *res; | 
|  | int irq; | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * Right now device-tree probed devices don't get dma_mask set. | 
|  | * Since shared usb code relies on it, set it here for now. | 
|  | * Once we move to full device tree support this will vanish off. | 
|  | */ | 
|  | err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | exynos_setup_vbus_gpio(&pdev->dev); | 
|  |  | 
|  | hcd = usb_create_hcd(&exynos_ehci_hc_driver, | 
|  | &pdev->dev, dev_name(&pdev->dev)); | 
|  | if (!hcd) { | 
|  | dev_err(&pdev->dev, "Unable to create HCD\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | exynos_ehci = to_exynos_ehci(hcd); | 
|  |  | 
|  | if (of_device_is_compatible(pdev->dev.of_node, | 
|  | "samsung,exynos5440-ehci")) | 
|  | goto skip_phy; | 
|  |  | 
|  | err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci); | 
|  | if (err) | 
|  | goto fail_clk; | 
|  |  | 
|  | skip_phy: | 
|  |  | 
|  | exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); | 
|  |  | 
|  | if (IS_ERR(exynos_ehci->clk)) { | 
|  | dev_err(&pdev->dev, "Failed to get usbhost clock\n"); | 
|  | err = PTR_ERR(exynos_ehci->clk); | 
|  | goto fail_clk; | 
|  | } | 
|  |  | 
|  | err = clk_prepare_enable(exynos_ehci->clk); | 
|  | if (err) | 
|  | goto fail_clk; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | hcd->regs = devm_ioremap_resource(&pdev->dev, res); | 
|  | if (IS_ERR(hcd->regs)) { | 
|  | err = PTR_ERR(hcd->regs); | 
|  | goto fail_io; | 
|  | } | 
|  |  | 
|  | hcd->rsrc_start = res->start; | 
|  | hcd->rsrc_len = resource_size(res); | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (!irq) { | 
|  | dev_err(&pdev->dev, "Failed to get IRQ\n"); | 
|  | err = -ENODEV; | 
|  | goto fail_io; | 
|  | } | 
|  |  | 
|  | err = exynos_ehci_phy_enable(&pdev->dev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Failed to enable USB phy\n"); | 
|  | goto fail_io; | 
|  | } | 
|  |  | 
|  | ehci = hcd_to_ehci(hcd); | 
|  | ehci->caps = hcd->regs; | 
|  |  | 
|  | /* DMA burst Enable */ | 
|  | writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); | 
|  |  | 
|  | err = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Failed to add USB HCD\n"); | 
|  | goto fail_add_hcd; | 
|  | } | 
|  | device_wakeup_enable(hcd->self.controller); | 
|  |  | 
|  | platform_set_drvdata(pdev, hcd); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_add_hcd: | 
|  | exynos_ehci_phy_disable(&pdev->dev); | 
|  | fail_io: | 
|  | clk_disable_unprepare(exynos_ehci->clk); | 
|  | fail_clk: | 
|  | usb_put_hcd(hcd); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int exynos_ehci_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
|  | struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); | 
|  |  | 
|  | usb_remove_hcd(hcd); | 
|  |  | 
|  | exynos_ehci_phy_disable(&pdev->dev); | 
|  |  | 
|  | clk_disable_unprepare(exynos_ehci->clk); | 
|  |  | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int exynos_ehci_suspend(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); | 
|  |  | 
|  | bool do_wakeup = device_may_wakeup(dev); | 
|  | int rc; | 
|  |  | 
|  | rc = ehci_suspend(hcd, do_wakeup); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | exynos_ehci_phy_disable(dev); | 
|  |  | 
|  | clk_disable_unprepare(exynos_ehci->clk); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int exynos_ehci_resume(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); | 
|  | int ret; | 
|  |  | 
|  | ret = clk_prepare_enable(exynos_ehci->clk); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = exynos_ehci_phy_enable(dev); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to enable USB phy\n"); | 
|  | clk_disable_unprepare(exynos_ehci->clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* DMA burst Enable */ | 
|  | writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); | 
|  |  | 
|  | ehci_resume(hcd, false); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define exynos_ehci_suspend	NULL | 
|  | #define exynos_ehci_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static const struct dev_pm_ops exynos_ehci_pm_ops = { | 
|  | .suspend	= exynos_ehci_suspend, | 
|  | .resume		= exynos_ehci_resume, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id exynos_ehci_match[] = { | 
|  | { .compatible = "samsung,exynos4210-ehci" }, | 
|  | { .compatible = "samsung,exynos5440-ehci" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, exynos_ehci_match); | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver exynos_ehci_driver = { | 
|  | .probe		= exynos_ehci_probe, | 
|  | .remove		= exynos_ehci_remove, | 
|  | .shutdown	= usb_hcd_platform_shutdown, | 
|  | .driver = { | 
|  | .name	= "exynos-ehci", | 
|  | .pm	= &exynos_ehci_pm_ops, | 
|  | .of_match_table = of_match_ptr(exynos_ehci_match), | 
|  | } | 
|  | }; | 
|  | static const struct ehci_driver_overrides exynos_overrides __initconst = { | 
|  | .extra_priv_size = sizeof(struct exynos_ehci_hcd), | 
|  | }; | 
|  |  | 
|  | static int __init ehci_exynos_init(void) | 
|  | { | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | pr_info("%s: " DRIVER_DESC "\n", hcd_name); | 
|  | ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides); | 
|  | return platform_driver_register(&exynos_ehci_driver); | 
|  | } | 
|  | module_init(ehci_exynos_init); | 
|  |  | 
|  | static void __exit ehci_exynos_cleanup(void) | 
|  | { | 
|  | platform_driver_unregister(&exynos_ehci_driver); | 
|  | } | 
|  | module_exit(ehci_exynos_cleanup); | 
|  |  | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_ALIAS("platform:exynos-ehci"); | 
|  | MODULE_AUTHOR("Jingoo Han"); | 
|  | MODULE_AUTHOR("Joonyoung Shim"); | 
|  | MODULE_LICENSE("GPL v2"); |