blob: f1c96aec8c7b2549212b1b8a3db35bdaf5395829 [file] [log] [blame] [edit]
/*
Mantis PCI bridge driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <asm/io.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_uart.h"
#include "mantis_input.h"
struct mantis_uart_params {
enum mantis_baud baud_rate;
enum mantis_parity parity;
};
static struct {
char string[7];
} rates[5] = {
{ "9600" },
{ "19200" },
{ "38400" },
{ "57600" },
{ "115200" }
};
static struct {
char string[5];
} parity[3] = {
{ "NONE" },
{ "ODD" },
{ "EVEN" }
};
static void mantis_uart_read(struct mantis_pci *mantis)
{
struct mantis_hwconfig *config = mantis->hwconfig;
int i, scancode = 0, err = 0;
/* get data */
dprintk(MANTIS_DEBUG, 1, "UART Reading ...");
for (i = 0; i < (config->bytes + 1); i++) {
int data = mmread(MANTIS_UART_RXD);
dprintk(MANTIS_DEBUG, 0, " <%02x>", data);
scancode = (scancode << 8) | (data & 0x3f);
err |= data;
if (data & (1 << 7))
dprintk(MANTIS_ERROR, 1, "UART framing error");
if (data & (1 << 6))
dprintk(MANTIS_ERROR, 1, "UART parity error");
}
dprintk(MANTIS_DEBUG, 0, "\n");
if ((err & 0xC0) == 0)
mantis_input_process(mantis, scancode);
}
static void mantis_uart_work(struct work_struct *work)
{
struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
u32 stat;
stat = mmread(MANTIS_UART_STAT);
if (stat & MANTIS_UART_RXFIFO_FULL)
dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
/*
* MANTIS_UART_RXFIFO_DATA is only set if at least
* config->bytes + 1 bytes are in the FIFO.
*/
while (stat & MANTIS_UART_RXFIFO_DATA) {
mantis_uart_read(mantis);
stat = mmread(MANTIS_UART_STAT);
}
/* re-enable UART (RX) interrupt */
mantis_unmask_ints(mantis, MANTIS_INT_IRQ1);
}
static int mantis_uart_setup(struct mantis_pci *mantis,
struct mantis_uart_params *params)
{
u32 reg;
mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
reg = mmread(MANTIS_UART_BAUD);
switch (params->baud_rate) {
case MANTIS_BAUD_9600:
reg |= 0xd8;
break;
case MANTIS_BAUD_19200:
reg |= 0x6c;
break;
case MANTIS_BAUD_38400:
reg |= 0x36;
break;
case MANTIS_BAUD_57600:
reg |= 0x23;
break;
case MANTIS_BAUD_115200:
reg |= 0x11;
break;
default:
return -EINVAL;
}
mmwrite(reg, MANTIS_UART_BAUD);
return 0;
}
int mantis_uart_init(struct mantis_pci *mantis)
{
struct mantis_hwconfig *config = mantis->hwconfig;
struct mantis_uart_params params;
/* default parity: */
params.baud_rate = config->baud_rate;
params.parity = config->parity;
dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
rates[params.baud_rate].string,
parity[params.parity].string);
INIT_WORK(&mantis->uart_work, mantis_uart_work);
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
mantis_uart_setup(mantis, &params);
/* default 1 byte */
mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
/* flush buffer */
mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
/* enable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
mantis_unmask_ints(mantis, MANTIS_INT_IRQ1);
schedule_work(&mantis->uart_work);
dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
return 0;
}
EXPORT_SYMBOL_GPL(mantis_uart_init);
void mantis_uart_exit(struct mantis_pci *mantis)
{
/* disable interrupt */
mantis_mask_ints(mantis, MANTIS_INT_IRQ1);
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
flush_work(&mantis->uart_work);
}
EXPORT_SYMBOL_GPL(mantis_uart_exit);