| ITE IT6263 LVDS to HDMI bridge bindings |
| |
| Required properties: |
| - compatible: "ite,it6263" |
| - reg: i2c address of the bridge |
| - video input: this subnode can contain a video input port node |
| to connect the bridge to a LVDS output interface (See this |
| documentation [1]). |
| |
| Optional properties: |
| - split-mode: boolean. if this exists, split mode is enabled, |
| otherwise, single mode is enabled. |
| - reset-gpios: OF device-tree gpio specification for SYSRSTN pin. |
| |
| [1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| lvds-to-hdmi-bridge@4c { |
| compatible = "ite,it6263"; |
| reg = <0x4c>; |
| |
| port { |
| it6263_0_in: endpoint { |
| clock-lanes = <3>; |
| data-lanes = <0 1 2 4 5>; |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| }; |