| Analogix ANX7814 SlimPort (Full-HD Transmitter) |
| ----------------------------------------------- |
| |
| The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter |
| designed for portable devices. |
| |
| Required properties: |
| |
| - compatible : "analogix,anx7814" |
| - reg : I2C address of the device |
| - interrupt-parent : Should be the phandle of the interrupt controller |
| that services interrupts for this device |
| - interrupts : Should contain the INTP interrupt |
| - hpd-gpios : Which GPIO to use for hpd |
| - pd-gpios : Which GPIO to use for power down |
| - reset-gpios : Which GPIO to use for reset |
| |
| Optional properties: |
| |
| - dvdd10-supply : Regulator for 1.0V digital core power. |
| - Video port for HDMI input, using the DT bindings defined in [1]. |
| |
| [1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| |
| anx7814: anx7814@38 { |
| compatible = "analogix,anx7814"; |
| reg = <0x38>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ |
| hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; |
| pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; |
| port { |
| anx7814_in: endpoint { |
| remote-endpoint = <&hdmi0_out>; |
| }; |
| }; |
| }; |
