| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * BPF Jit compiler for s390. |
| * |
| * Minimum build requirements: |
| * |
| * - HAVE_MARCH_Z196_FEATURES: laal, laalg |
| * - HAVE_MARCH_Z10_FEATURES: msfi, cgrj, clgrj |
| * - HAVE_MARCH_Z9_109_FEATURES: alfi, llilf, clfi, oilf, nilf |
| * - PACK_STACK |
| * - 64BIT |
| * |
| * Copyright IBM Corp. 2012,2015 |
| * |
| * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Michael Holzheu <holzheu@linux.vnet.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "bpf_jit" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/netdevice.h> |
| #include <linux/filter.h> |
| #include <linux/init.h> |
| #include <linux/bpf.h> |
| #include <asm/cacheflush.h> |
| #include <asm/dis.h> |
| #include <asm/facility.h> |
| #include <asm/nospec-branch.h> |
| #include <asm/set_memory.h> |
| #include "bpf_jit.h" |
| |
| int bpf_jit_enable __read_mostly; |
| |
| struct bpf_jit { |
| u32 seen; /* Flags to remember seen eBPF instructions */ |
| u32 seen_reg[16]; /* Array to remember which registers are used */ |
| u32 *addrs; /* Array with relative instruction addresses */ |
| u8 *prg_buf; /* Start of program */ |
| int size; /* Size of program and literal pool */ |
| int size_prg; /* Size of program */ |
| int prg; /* Current position in program */ |
| int lit_start; /* Start of literal pool */ |
| int lit; /* Current position in literal pool */ |
| int base_ip; /* Base address for literal pool */ |
| int ret0_ip; /* Address of return 0 */ |
| int exit_ip; /* Address of exit */ |
| int r1_thunk_ip; /* Address of expoline thunk for 'br %r1' */ |
| int r14_thunk_ip; /* Address of expoline thunk for 'br %r14' */ |
| int tail_call_start; /* Tail call start offset */ |
| int labels[1]; /* Labels for local jumps */ |
| }; |
| |
| #define BPF_SIZE_MAX 0xffff /* Max size for program (16 bit branches) */ |
| |
| #define SEEN_SKB 1 /* skb access */ |
| #define SEEN_MEM 2 /* use mem[] for temporary storage */ |
| #define SEEN_RET0 4 /* ret0_ip points to a valid return 0 */ |
| #define SEEN_LITERAL 8 /* code uses literals */ |
| #define SEEN_FUNC 16 /* calls C functions */ |
| #define SEEN_TAIL_CALL 32 /* code uses tail calls */ |
| #define SEEN_REG_AX 64 /* code uses constant blinding */ |
| #define SEEN_STACK (SEEN_FUNC | SEEN_MEM | SEEN_SKB) |
| |
| /* |
| * s390 registers |
| */ |
| #define REG_W0 (MAX_BPF_JIT_REG + 0) /* Work register 1 (even) */ |
| #define REG_W1 (MAX_BPF_JIT_REG + 1) /* Work register 2 (odd) */ |
| #define REG_SKB_DATA (MAX_BPF_JIT_REG + 2) /* SKB data register */ |
| #define REG_L (MAX_BPF_JIT_REG + 3) /* Literal pool register */ |
| #define REG_15 (MAX_BPF_JIT_REG + 4) /* Register 15 */ |
| #define REG_0 REG_W0 /* Register 0 */ |
| #define REG_1 REG_W1 /* Register 1 */ |
| #define REG_2 BPF_REG_1 /* Register 2 */ |
| #define REG_14 BPF_REG_0 /* Register 14 */ |
| |
| /* |
| * Mapping of BPF registers to s390 registers |
| */ |
| static const int reg2hex[] = { |
| /* Return code */ |
| [BPF_REG_0] = 14, |
| /* Function parameters */ |
| [BPF_REG_1] = 2, |
| [BPF_REG_2] = 3, |
| [BPF_REG_3] = 4, |
| [BPF_REG_4] = 5, |
| [BPF_REG_5] = 6, |
| /* Call saved registers */ |
| [BPF_REG_6] = 7, |
| [BPF_REG_7] = 8, |
| [BPF_REG_8] = 9, |
| [BPF_REG_9] = 10, |
| /* BPF stack pointer */ |
| [BPF_REG_FP] = 13, |
| /* Register for blinding (shared with REG_SKB_DATA) */ |
| [BPF_REG_AX] = 12, |
| /* SKB data pointer */ |
| [REG_SKB_DATA] = 12, |
| /* Work registers for s390x backend */ |
| [REG_W0] = 0, |
| [REG_W1] = 1, |
| [REG_L] = 11, |
| [REG_15] = 15, |
| }; |
| |
| static inline u32 reg(u32 dst_reg, u32 src_reg) |
| { |
| return reg2hex[dst_reg] << 4 | reg2hex[src_reg]; |
| } |
| |
| static inline u32 reg_high(u32 reg) |
| { |
| return reg2hex[reg] << 4; |
| } |
| |
| static inline void reg_set_seen(struct bpf_jit *jit, u32 b1) |
| { |
| u32 r1 = reg2hex[b1]; |
| |
| if (!jit->seen_reg[r1] && r1 >= 6 && r1 <= 15) |
| jit->seen_reg[r1] = 1; |
| } |
| |
| #define REG_SET_SEEN(b1) \ |
| ({ \ |
| reg_set_seen(jit, b1); \ |
| }) |
| |
| #define REG_SEEN(b1) jit->seen_reg[reg2hex[(b1)]] |
| |
| /* |
| * EMIT macros for code generation |
| */ |
| |
| #define _EMIT2(op) \ |
| ({ \ |
| if (jit->prg_buf) \ |
| *(u16 *) (jit->prg_buf + jit->prg) = op; \ |
| jit->prg += 2; \ |
| }) |
| |
| #define EMIT2(op, b1, b2) \ |
| ({ \ |
| _EMIT2(op | reg(b1, b2)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define _EMIT4(op) \ |
| ({ \ |
| if (jit->prg_buf) \ |
| *(u32 *) (jit->prg_buf + jit->prg) = op; \ |
| jit->prg += 4; \ |
| }) |
| |
| #define EMIT4(op, b1, b2) \ |
| ({ \ |
| _EMIT4(op | reg(b1, b2)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT4_RRF(op, b1, b2, b3) \ |
| ({ \ |
| _EMIT4(op | reg_high(b3) << 8 | reg(b1, b2)); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| REG_SET_SEEN(b3); \ |
| }) |
| |
| #define _EMIT4_DISP(op, disp) \ |
| ({ \ |
| unsigned int __disp = (disp) & 0xfff; \ |
| _EMIT4(op | __disp); \ |
| }) |
| |
| #define EMIT4_DISP(op, b1, b2, disp) \ |
| ({ \ |
| _EMIT4_DISP(op | reg_high(b1) << 16 | \ |
| reg_high(b2) << 8, disp); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT4_IMM(op, b1, imm) \ |
| ({ \ |
| unsigned int __imm = (imm) & 0xffff; \ |
| _EMIT4(op | reg_high(b1) << 16 | __imm); \ |
| REG_SET_SEEN(b1); \ |
| }) |
| |
| #define EMIT4_PCREL(op, pcrel) \ |
| ({ \ |
| long __pcrel = ((pcrel) >> 1) & 0xffff; \ |
| _EMIT4(op | __pcrel); \ |
| }) |
| |
| #define _EMIT6(op1, op2) \ |
| ({ \ |
| if (jit->prg_buf) { \ |
| *(u32 *) (jit->prg_buf + jit->prg) = op1; \ |
| *(u16 *) (jit->prg_buf + jit->prg + 4) = op2; \ |
| } \ |
| jit->prg += 6; \ |
| }) |
| |
| #define _EMIT6_DISP(op1, op2, disp) \ |
| ({ \ |
| unsigned int __disp = (disp) & 0xfff; \ |
| _EMIT6(op1 | __disp, op2); \ |
| }) |
| |
| #define _EMIT6_DISP_LH(op1, op2, disp) \ |
| ({ \ |
| u32 _disp = (u32) disp; \ |
| unsigned int __disp_h = _disp & 0xff000; \ |
| unsigned int __disp_l = _disp & 0x00fff; \ |
| _EMIT6(op1 | __disp_l, op2 | __disp_h >> 4); \ |
| }) |
| |
| #define EMIT6_DISP_LH(op1, op2, b1, b2, b3, disp) \ |
| ({ \ |
| _EMIT6_DISP_LH(op1 | reg(b1, b2) << 16 | \ |
| reg_high(b3) << 8, op2, disp); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| REG_SET_SEEN(b3); \ |
| }) |
| |
| #define EMIT6_PCREL_LABEL(op1, op2, b1, b2, label, mask) \ |
| ({ \ |
| int rel = (jit->labels[label] - jit->prg) >> 1; \ |
| _EMIT6(op1 | reg(b1, b2) << 16 | (rel & 0xffff), \ |
| op2 | mask << 12); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT6_PCREL_IMM_LABEL(op1, op2, b1, imm, label, mask) \ |
| ({ \ |
| int rel = (jit->labels[label] - jit->prg) >> 1; \ |
| _EMIT6(op1 | (reg_high(b1) | mask) << 16 | \ |
| (rel & 0xffff), op2 | (imm & 0xff) << 8); \ |
| REG_SET_SEEN(b1); \ |
| BUILD_BUG_ON(((unsigned long) imm) > 0xff); \ |
| }) |
| |
| #define EMIT6_PCREL(op1, op2, b1, b2, i, off, mask) \ |
| ({ \ |
| /* Branch instruction needs 6 bytes */ \ |
| int rel = (addrs[i + off + 1] - (addrs[i + 1] - 6)) / 2;\ |
| _EMIT6(op1 | reg(b1, b2) << 16 | (rel & 0xffff), op2 | mask); \ |
| REG_SET_SEEN(b1); \ |
| REG_SET_SEEN(b2); \ |
| }) |
| |
| #define EMIT6_PCREL_RILB(op, b, target) \ |
| ({ \ |
| int rel = (target - jit->prg) / 2; \ |
| _EMIT6(op | reg_high(b) << 16 | rel >> 16, rel & 0xffff); \ |
| REG_SET_SEEN(b); \ |
| }) |
| |
| #define EMIT6_PCREL_RIL(op, target) \ |
| ({ \ |
| int rel = (target - jit->prg) / 2; \ |
| _EMIT6(op | rel >> 16, rel & 0xffff); \ |
| }) |
| |
| #define _EMIT6_IMM(op, imm) \ |
| ({ \ |
| unsigned int __imm = (imm); \ |
| _EMIT6(op | (__imm >> 16), __imm & 0xffff); \ |
| }) |
| |
| #define EMIT6_IMM(op, b1, imm) \ |
| ({ \ |
| _EMIT6_IMM(op | reg_high(b1) << 16, imm); \ |
| REG_SET_SEEN(b1); \ |
| }) |
| |
| #define EMIT_CONST_U32(val) \ |
| ({ \ |
| unsigned int ret; \ |
| ret = jit->lit - jit->base_ip; \ |
| jit->seen |= SEEN_LITERAL; \ |
| if (jit->prg_buf) \ |
| *(u32 *) (jit->prg_buf + jit->lit) = (u32) val; \ |
| jit->lit += 4; \ |
| ret; \ |
| }) |
| |
| #define EMIT_CONST_U64(val) \ |
| ({ \ |
| unsigned int ret; \ |
| ret = jit->lit - jit->base_ip; \ |
| jit->seen |= SEEN_LITERAL; \ |
| if (jit->prg_buf) \ |
| *(u64 *) (jit->prg_buf + jit->lit) = (u64) val; \ |
| jit->lit += 8; \ |
| ret; \ |
| }) |
| |
| #define EMIT_ZERO(b1) \ |
| ({ \ |
| /* llgfr %dst,%dst (zero extend to 64 bit) */ \ |
| EMIT4(0xb9160000, b1, b1); \ |
| REG_SET_SEEN(b1); \ |
| }) |
| |
| /* |
| * Fill whole space with illegal instructions |
| */ |
| static void jit_fill_hole(void *area, unsigned int size) |
| { |
| memset(area, 0, size); |
| } |
| |
| /* |
| * Save registers from "rs" (register start) to "re" (register end) on stack |
| */ |
| static void save_regs(struct bpf_jit *jit, u32 rs, u32 re) |
| { |
| u32 off = STK_OFF_R6 + (rs - 6) * 8; |
| |
| if (rs == re) |
| /* stg %rs,off(%r15) */ |
| _EMIT6(0xe300f000 | rs << 20 | off, 0x0024); |
| else |
| /* stmg %rs,%re,off(%r15) */ |
| _EMIT6_DISP(0xeb00f000 | rs << 20 | re << 16, 0x0024, off); |
| } |
| |
| /* |
| * Restore registers from "rs" (register start) to "re" (register end) on stack |
| */ |
| static void restore_regs(struct bpf_jit *jit, u32 rs, u32 re) |
| { |
| u32 off = STK_OFF_R6 + (rs - 6) * 8; |
| |
| if (jit->seen & SEEN_STACK) |
| off += STK_OFF; |
| |
| if (rs == re) |
| /* lg %rs,off(%r15) */ |
| _EMIT6(0xe300f000 | rs << 20 | off, 0x0004); |
| else |
| /* lmg %rs,%re,off(%r15) */ |
| _EMIT6_DISP(0xeb00f000 | rs << 20 | re << 16, 0x0004, off); |
| } |
| |
| /* |
| * Return first seen register (from start) |
| */ |
| static int get_start(struct bpf_jit *jit, int start) |
| { |
| int i; |
| |
| for (i = start; i <= 15; i++) { |
| if (jit->seen_reg[i]) |
| return i; |
| } |
| return 0; |
| } |
| |
| /* |
| * Return last seen register (from start) (gap >= 2) |
| */ |
| static int get_end(struct bpf_jit *jit, int start) |
| { |
| int i; |
| |
| for (i = start; i < 15; i++) { |
| if (!jit->seen_reg[i] && !jit->seen_reg[i + 1]) |
| return i - 1; |
| } |
| return jit->seen_reg[15] ? 15 : 14; |
| } |
| |
| #define REGS_SAVE 1 |
| #define REGS_RESTORE 0 |
| /* |
| * Save and restore clobbered registers (6-15) on stack. |
| * We save/restore registers in chunks with gap >= 2 registers. |
| */ |
| static void save_restore_regs(struct bpf_jit *jit, int op) |
| { |
| |
| int re = 6, rs; |
| |
| do { |
| rs = get_start(jit, re); |
| if (!rs) |
| break; |
| re = get_end(jit, rs + 1); |
| if (op == REGS_SAVE) |
| save_regs(jit, rs, re); |
| else |
| restore_regs(jit, rs, re); |
| re++; |
| } while (re <= 15); |
| } |
| |
| /* |
| * For SKB access %b1 contains the SKB pointer. For "bpf_jit.S" |
| * we store the SKB header length on the stack and the SKB data |
| * pointer in REG_SKB_DATA if BPF_REG_AX is not used. |
| */ |
| static void emit_load_skb_data_hlen(struct bpf_jit *jit) |
| { |
| /* Header length: llgf %w1,<len>(%b1) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_1, |
| offsetof(struct sk_buff, len)); |
| /* s %w1,<data_len>(%b1) */ |
| EMIT4_DISP(0x5b000000, REG_W1, BPF_REG_1, |
| offsetof(struct sk_buff, data_len)); |
| /* stg %w1,ST_OFF_HLEN(%r0,%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, STK_OFF_HLEN); |
| if (!(jit->seen & SEEN_REG_AX)) |
| /* lg %skb_data,data_off(%b1) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0, |
| BPF_REG_1, offsetof(struct sk_buff, data)); |
| } |
| |
| /* |
| * Emit function prologue |
| * |
| * Save registers and create stack frame if necessary. |
| * See stack frame layout desription in "bpf_jit.h"! |
| */ |
| static void bpf_jit_prologue(struct bpf_jit *jit) |
| { |
| if (jit->seen & SEEN_TAIL_CALL) { |
| /* xc STK_OFF_TCCNT(4,%r15),STK_OFF_TCCNT(%r15) */ |
| _EMIT6(0xd703f000 | STK_OFF_TCCNT, 0xf000 | STK_OFF_TCCNT); |
| } else { |
| /* j tail_call_start: NOP if no tail calls are used */ |
| EMIT4_PCREL(0xa7f40000, 6); |
| _EMIT2(0); |
| } |
| /* Tail calls have to skip above initialization */ |
| jit->tail_call_start = jit->prg; |
| /* Save registers */ |
| save_restore_regs(jit, REGS_SAVE); |
| /* Setup literal pool */ |
| if (jit->seen & SEEN_LITERAL) { |
| /* basr %r13,0 */ |
| EMIT2(0x0d00, REG_L, REG_0); |
| jit->base_ip = jit->prg; |
| } |
| /* Setup stack and backchain */ |
| if (jit->seen & SEEN_STACK) { |
| if (jit->seen & SEEN_FUNC) |
| /* lgr %w1,%r15 (backchain) */ |
| EMIT4(0xb9040000, REG_W1, REG_15); |
| /* la %bfp,STK_160_UNUSED(%r15) (BPF frame pointer) */ |
| EMIT4_DISP(0x41000000, BPF_REG_FP, REG_15, STK_160_UNUSED); |
| /* aghi %r15,-STK_OFF */ |
| EMIT4_IMM(0xa70b0000, REG_15, -STK_OFF); |
| if (jit->seen & SEEN_FUNC) |
| /* stg %w1,152(%r15) (backchain) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, |
| REG_15, 152); |
| } |
| if (jit->seen & SEEN_SKB) { |
| emit_load_skb_data_hlen(jit); |
| /* stg %b1,ST_OFF_SKBP(%r0,%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15, |
| STK_OFF_SKBP); |
| } |
| } |
| |
| /* |
| * Function epilogue |
| */ |
| static void bpf_jit_epilogue(struct bpf_jit *jit) |
| { |
| /* Return 0 */ |
| if (jit->seen & SEEN_RET0) { |
| jit->ret0_ip = jit->prg; |
| /* lghi %b0,0 */ |
| EMIT4_IMM(0xa7090000, BPF_REG_0, 0); |
| } |
| jit->exit_ip = jit->prg; |
| /* Load exit code: lgr %r2,%b0 */ |
| EMIT4(0xb9040000, REG_2, BPF_REG_0); |
| /* Restore registers */ |
| save_restore_regs(jit, REGS_RESTORE); |
| if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) { |
| jit->r14_thunk_ip = jit->prg; |
| /* Generate __s390_indirect_jump_r14 thunk */ |
| if (test_facility(35)) { |
| /* exrl %r0,.+10 */ |
| EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10); |
| } else { |
| /* larl %r1,.+14 */ |
| EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14); |
| /* ex 0,0(%r1) */ |
| EMIT4_DISP(0x44000000, REG_0, REG_1, 0); |
| } |
| /* j . */ |
| EMIT4_PCREL(0xa7f40000, 0); |
| } |
| /* br %r14 */ |
| _EMIT2(0x07fe); |
| |
| if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable && |
| (jit->seen & SEEN_FUNC)) { |
| jit->r1_thunk_ip = jit->prg; |
| /* Generate __s390_indirect_jump_r1 thunk */ |
| if (test_facility(35)) { |
| /* exrl %r0,.+10 */ |
| EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10); |
| /* j . */ |
| EMIT4_PCREL(0xa7f40000, 0); |
| /* br %r1 */ |
| _EMIT2(0x07f1); |
| } else { |
| /* ex 0,S390_lowcore.br_r1_tampoline */ |
| EMIT4_DISP(0x44000000, REG_0, REG_0, |
| offsetof(struct lowcore, br_r1_trampoline)); |
| /* j . */ |
| EMIT4_PCREL(0xa7f40000, 0); |
| } |
| } |
| } |
| |
| /* |
| * Compile one eBPF instruction into s390x code |
| * |
| * NOTE: Use noinline because for gcov (-fprofile-arcs) gcc allocates a lot of |
| * stack space for the large switch statement. |
| */ |
| static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) |
| { |
| struct bpf_insn *insn = &fp->insnsi[i]; |
| int jmp_off, last, insn_count = 1; |
| unsigned int func_addr, mask; |
| u32 dst_reg = insn->dst_reg; |
| u32 src_reg = insn->src_reg; |
| u32 *addrs = jit->addrs; |
| s32 imm = insn->imm; |
| s16 off = insn->off; |
| |
| if (dst_reg == BPF_REG_AX || src_reg == BPF_REG_AX) |
| jit->seen |= SEEN_REG_AX; |
| switch (insn->code) { |
| /* |
| * BPF_MOV |
| */ |
| case BPF_ALU | BPF_MOV | BPF_X: /* dst = (u32) src */ |
| /* llgfr %dst,%src */ |
| EMIT4(0xb9160000, dst_reg, src_reg); |
| break; |
| case BPF_ALU64 | BPF_MOV | BPF_X: /* dst = src */ |
| /* lgr %dst,%src */ |
| EMIT4(0xb9040000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_MOV | BPF_K: /* dst = (u32) imm */ |
| /* llilf %dst,imm */ |
| EMIT6_IMM(0xc00f0000, dst_reg, imm); |
| break; |
| case BPF_ALU64 | BPF_MOV | BPF_K: /* dst = imm */ |
| /* lgfi %dst,imm */ |
| EMIT6_IMM(0xc0010000, dst_reg, imm); |
| break; |
| /* |
| * BPF_LD 64 |
| */ |
| case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */ |
| { |
| /* 16 byte instruction that uses two 'struct bpf_insn' */ |
| u64 imm64; |
| |
| imm64 = (u64)(u32) insn[0].imm | ((u64)(u32) insn[1].imm) << 32; |
| /* lg %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm64)); |
| insn_count = 2; |
| break; |
| } |
| /* |
| * BPF_ADD |
| */ |
| case BPF_ALU | BPF_ADD | BPF_X: /* dst = (u32) dst + (u32) src */ |
| /* ar %dst,%src */ |
| EMIT2(0x1a00, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_ADD | BPF_X: /* dst = dst + src */ |
| /* agr %dst,%src */ |
| EMIT4(0xb9080000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_ADD | BPF_K: /* dst = (u32) dst + (u32) imm */ |
| if (!imm) |
| break; |
| /* alfi %dst,imm */ |
| EMIT6_IMM(0xc20b0000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_ADD | BPF_K: /* dst = dst + imm */ |
| if (!imm) |
| break; |
| /* agfi %dst,imm */ |
| EMIT6_IMM(0xc2080000, dst_reg, imm); |
| break; |
| /* |
| * BPF_SUB |
| */ |
| case BPF_ALU | BPF_SUB | BPF_X: /* dst = (u32) dst - (u32) src */ |
| /* sr %dst,%src */ |
| EMIT2(0x1b00, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_SUB | BPF_X: /* dst = dst - src */ |
| /* sgr %dst,%src */ |
| EMIT4(0xb9090000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_SUB | BPF_K: /* dst = (u32) dst - (u32) imm */ |
| if (!imm) |
| break; |
| /* alfi %dst,-imm */ |
| EMIT6_IMM(0xc20b0000, dst_reg, -imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ |
| if (!imm) |
| break; |
| /* agfi %dst,-imm */ |
| EMIT6_IMM(0xc2080000, dst_reg, -imm); |
| break; |
| /* |
| * BPF_MUL |
| */ |
| case BPF_ALU | BPF_MUL | BPF_X: /* dst = (u32) dst * (u32) src */ |
| /* msr %dst,%src */ |
| EMIT4(0xb2520000, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_MUL | BPF_X: /* dst = dst * src */ |
| /* msgr %dst,%src */ |
| EMIT4(0xb90c0000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_MUL | BPF_K: /* dst = (u32) dst * (u32) imm */ |
| if (imm == 1) |
| break; |
| /* msfi %r5,imm */ |
| EMIT6_IMM(0xc2010000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_MUL | BPF_K: /* dst = dst * imm */ |
| if (imm == 1) |
| break; |
| /* msgfi %dst,imm */ |
| EMIT6_IMM(0xc2000000, dst_reg, imm); |
| break; |
| /* |
| * BPF_DIV / BPF_MOD |
| */ |
| case BPF_ALU | BPF_DIV | BPF_X: /* dst = (u32) dst / (u32) src */ |
| case BPF_ALU | BPF_MOD | BPF_X: /* dst = (u32) dst % (u32) src */ |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| jit->seen |= SEEN_RET0; |
| /* ltr %src,%src (if src == 0 goto fail) */ |
| EMIT2(0x1200, src_reg, src_reg); |
| /* jz <ret0> */ |
| EMIT4_PCREL(0xa7840000, jit->ret0_ip - jit->prg); |
| /* lhi %w0,0 */ |
| EMIT4_IMM(0xa7080000, REG_W0, 0); |
| /* lr %w1,%dst */ |
| EMIT2(0x1800, REG_W1, dst_reg); |
| /* dlr %w0,%src */ |
| EMIT4(0xb9970000, REG_W0, src_reg); |
| /* llgfr %dst,%rc */ |
| EMIT4(0xb9160000, dst_reg, rc_reg); |
| break; |
| } |
| case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / src */ |
| case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % src */ |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| jit->seen |= SEEN_RET0; |
| /* ltgr %src,%src (if src == 0 goto fail) */ |
| EMIT4(0xb9020000, src_reg, src_reg); |
| /* jz <ret0> */ |
| EMIT4_PCREL(0xa7840000, jit->ret0_ip - jit->prg); |
| /* lghi %w0,0 */ |
| EMIT4_IMM(0xa7090000, REG_W0, 0); |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* dlgr %w0,%dst */ |
| EMIT4(0xb9870000, REG_W0, src_reg); |
| /* lgr %dst,%rc */ |
| EMIT4(0xb9040000, dst_reg, rc_reg); |
| break; |
| } |
| case BPF_ALU | BPF_DIV | BPF_K: /* dst = (u32) dst / (u32) imm */ |
| case BPF_ALU | BPF_MOD | BPF_K: /* dst = (u32) dst % (u32) imm */ |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| if (imm == 1) { |
| if (BPF_OP(insn->code) == BPF_MOD) |
| /* lhgi %dst,0 */ |
| EMIT4_IMM(0xa7090000, dst_reg, 0); |
| break; |
| } |
| /* lhi %w0,0 */ |
| EMIT4_IMM(0xa7080000, REG_W0, 0); |
| /* lr %w1,%dst */ |
| EMIT2(0x1800, REG_W1, dst_reg); |
| /* dl %w0,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0097, REG_W0, REG_0, REG_L, |
| EMIT_CONST_U32(imm)); |
| /* llgfr %dst,%rc */ |
| EMIT4(0xb9160000, dst_reg, rc_reg); |
| break; |
| } |
| case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / imm */ |
| case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % imm */ |
| { |
| int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; |
| |
| if (imm == 1) { |
| if (BPF_OP(insn->code) == BPF_MOD) |
| /* lhgi %dst,0 */ |
| EMIT4_IMM(0xa7090000, dst_reg, 0); |
| break; |
| } |
| /* lghi %w0,0 */ |
| EMIT4_IMM(0xa7090000, REG_W0, 0); |
| /* lgr %w1,%dst */ |
| EMIT4(0xb9040000, REG_W1, dst_reg); |
| /* dlg %w0,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0087, REG_W0, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| /* lgr %dst,%rc */ |
| EMIT4(0xb9040000, dst_reg, rc_reg); |
| break; |
| } |
| /* |
| * BPF_AND |
| */ |
| case BPF_ALU | BPF_AND | BPF_X: /* dst = (u32) dst & (u32) src */ |
| /* nr %dst,%src */ |
| EMIT2(0x1400, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_AND | BPF_X: /* dst = dst & src */ |
| /* ngr %dst,%src */ |
| EMIT4(0xb9800000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_AND | BPF_K: /* dst = (u32) dst & (u32) imm */ |
| /* nilf %dst,imm */ |
| EMIT6_IMM(0xc00b0000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_AND | BPF_K: /* dst = dst & imm */ |
| /* ng %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0080, dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| break; |
| /* |
| * BPF_OR |
| */ |
| case BPF_ALU | BPF_OR | BPF_X: /* dst = (u32) dst | (u32) src */ |
| /* or %dst,%src */ |
| EMIT2(0x1600, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_OR | BPF_X: /* dst = dst | src */ |
| /* ogr %dst,%src */ |
| EMIT4(0xb9810000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_OR | BPF_K: /* dst = (u32) dst | (u32) imm */ |
| /* oilf %dst,imm */ |
| EMIT6_IMM(0xc00d0000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_OR | BPF_K: /* dst = dst | imm */ |
| /* og %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0081, dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| break; |
| /* |
| * BPF_XOR |
| */ |
| case BPF_ALU | BPF_XOR | BPF_X: /* dst = (u32) dst ^ (u32) src */ |
| /* xr %dst,%src */ |
| EMIT2(0x1700, dst_reg, src_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_XOR | BPF_X: /* dst = dst ^ src */ |
| /* xgr %dst,%src */ |
| EMIT4(0xb9820000, dst_reg, src_reg); |
| break; |
| case BPF_ALU | BPF_XOR | BPF_K: /* dst = (u32) dst ^ (u32) imm */ |
| if (!imm) |
| break; |
| /* xilf %dst,imm */ |
| EMIT6_IMM(0xc0070000, dst_reg, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_XOR | BPF_K: /* dst = dst ^ imm */ |
| /* xg %dst,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0082, dst_reg, REG_0, REG_L, |
| EMIT_CONST_U64(imm)); |
| break; |
| /* |
| * BPF_LSH |
| */ |
| case BPF_ALU | BPF_LSH | BPF_X: /* dst = (u32) dst << (u32) src */ |
| /* sll %dst,0(%src) */ |
| EMIT4_DISP(0x89000000, dst_reg, src_reg, 0); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_LSH | BPF_X: /* dst = dst << src */ |
| /* sllg %dst,%dst,0(%src) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, src_reg, 0); |
| break; |
| case BPF_ALU | BPF_LSH | BPF_K: /* dst = (u32) dst << (u32) imm */ |
| if (imm == 0) |
| break; |
| /* sll %dst,imm(%r0) */ |
| EMIT4_DISP(0x89000000, dst_reg, REG_0, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_LSH | BPF_K: /* dst = dst << imm */ |
| if (imm == 0) |
| break; |
| /* sllg %dst,%dst,imm(%r0) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, REG_0, imm); |
| break; |
| /* |
| * BPF_RSH |
| */ |
| case BPF_ALU | BPF_RSH | BPF_X: /* dst = (u32) dst >> (u32) src */ |
| /* srl %dst,0(%src) */ |
| EMIT4_DISP(0x88000000, dst_reg, src_reg, 0); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_RSH | BPF_X: /* dst = dst >> src */ |
| /* srlg %dst,%dst,0(%src) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, src_reg, 0); |
| break; |
| case BPF_ALU | BPF_RSH | BPF_K: /* dst = (u32) dst >> (u32) imm */ |
| if (imm == 0) |
| break; |
| /* srl %dst,imm(%r0) */ |
| EMIT4_DISP(0x88000000, dst_reg, REG_0, imm); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_RSH | BPF_K: /* dst = dst >> imm */ |
| if (imm == 0) |
| break; |
| /* srlg %dst,%dst,imm(%r0) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, REG_0, imm); |
| break; |
| /* |
| * BPF_ARSH |
| */ |
| case BPF_ALU64 | BPF_ARSH | BPF_X: /* ((s64) dst) >>= src */ |
| /* srag %dst,%dst,0(%src) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000a, dst_reg, dst_reg, src_reg, 0); |
| break; |
| case BPF_ALU64 | BPF_ARSH | BPF_K: /* ((s64) dst) >>= imm */ |
| if (imm == 0) |
| break; |
| /* srag %dst,%dst,imm(%r0) */ |
| EMIT6_DISP_LH(0xeb000000, 0x000a, dst_reg, dst_reg, REG_0, imm); |
| break; |
| /* |
| * BPF_NEG |
| */ |
| case BPF_ALU | BPF_NEG: /* dst = (u32) -dst */ |
| /* lcr %dst,%dst */ |
| EMIT2(0x1300, dst_reg, dst_reg); |
| EMIT_ZERO(dst_reg); |
| break; |
| case BPF_ALU64 | BPF_NEG: /* dst = -dst */ |
| /* lcgr %dst,%dst */ |
| EMIT4(0xb9130000, dst_reg, dst_reg); |
| break; |
| /* |
| * BPF_FROM_BE/LE |
| */ |
| case BPF_ALU | BPF_END | BPF_FROM_BE: |
| /* s390 is big endian, therefore only clear high order bytes */ |
| switch (imm) { |
| case 16: /* dst = (u16) cpu_to_be16(dst) */ |
| /* llghr %dst,%dst */ |
| EMIT4(0xb9850000, dst_reg, dst_reg); |
| break; |
| case 32: /* dst = (u32) cpu_to_be32(dst) */ |
| /* llgfr %dst,%dst */ |
| EMIT4(0xb9160000, dst_reg, dst_reg); |
| break; |
| case 64: /* dst = (u64) cpu_to_be64(dst) */ |
| break; |
| } |
| break; |
| case BPF_ALU | BPF_END | BPF_FROM_LE: |
| switch (imm) { |
| case 16: /* dst = (u16) cpu_to_le16(dst) */ |
| /* lrvr %dst,%dst */ |
| EMIT4(0xb91f0000, dst_reg, dst_reg); |
| /* srl %dst,16(%r0) */ |
| EMIT4_DISP(0x88000000, dst_reg, REG_0, 16); |
| /* llghr %dst,%dst */ |
| EMIT4(0xb9850000, dst_reg, dst_reg); |
| break; |
| case 32: /* dst = (u32) cpu_to_le32(dst) */ |
| /* lrvr %dst,%dst */ |
| EMIT4(0xb91f0000, dst_reg, dst_reg); |
| /* llgfr %dst,%dst */ |
| EMIT4(0xb9160000, dst_reg, dst_reg); |
| break; |
| case 64: /* dst = (u64) cpu_to_le64(dst) */ |
| /* lrvgr %dst,%dst */ |
| EMIT4(0xb90f0000, dst_reg, dst_reg); |
| break; |
| } |
| break; |
| /* |
| * BPF_ST(X) |
| */ |
| case BPF_STX | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = src_reg */ |
| /* stcy %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0072, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = src */ |
| /* sthy %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0070, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = src */ |
| /* sty %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0050, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_MEM | BPF_DW: /* (u64 *)(dst + off) = src */ |
| /* stg %src,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, src_reg, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = imm */ |
| /* lhi %w0,imm */ |
| EMIT4_IMM(0xa7080000, REG_W0, (u8) imm); |
| /* stcy %w0,off(dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0072, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = imm */ |
| /* lhi %w0,imm */ |
| EMIT4_IMM(0xa7080000, REG_W0, (u16) imm); |
| /* sthy %w0,off(dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0070, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = imm */ |
| /* llilf %w0,imm */ |
| EMIT6_IMM(0xc00f0000, REG_W0, (u32) imm); |
| /* sty %w0,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0050, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_ST | BPF_MEM | BPF_DW: /* *(u64 *)(dst + off) = imm */ |
| /* lgfi %w0,imm */ |
| EMIT6_IMM(0xc0010000, REG_W0, imm); |
| /* stg %w0,off(%dst) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W0, dst_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| /* |
| * BPF_STX XADD (atomic_add) |
| */ |
| case BPF_STX | BPF_XADD | BPF_W: /* *(u32 *)(dst + off) += src */ |
| /* laal %w0,%src,off(%dst) */ |
| EMIT6_DISP_LH(0xeb000000, 0x00fa, REG_W0, src_reg, |
| dst_reg, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */ |
| /* laalg %w0,%src,off(%dst) */ |
| EMIT6_DISP_LH(0xeb000000, 0x00ea, REG_W0, src_reg, |
| dst_reg, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| /* |
| * BPF_LDX |
| */ |
| case BPF_LDX | BPF_MEM | BPF_B: /* dst = *(u8 *)(ul) (src + off) */ |
| /* llgc %dst,0(off,%src) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0090, dst_reg, src_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_LDX | BPF_MEM | BPF_H: /* dst = *(u16 *)(ul) (src + off) */ |
| /* llgh %dst,0(off,%src) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0091, dst_reg, src_reg, REG_0, off); |
| jit->seen |= SEEN_MEM; |
| break; |
| case BPF_LDX | BPF_MEM | BPF_W: /* dst = *(u32 *)(ul) (src + off) */ |
| /* llgf %dst,off(%src) */ |
| jit->seen |= SEEN_MEM; |
| EMIT6_DISP_LH(0xe3000000, 0x0016, dst_reg, src_reg, REG_0, off); |
| break; |
| case BPF_LDX | BPF_MEM | BPF_DW: /* dst = *(u64 *)(ul) (src + off) */ |
| /* lg %dst,0(off,%src) */ |
| jit->seen |= SEEN_MEM; |
| EMIT6_DISP_LH(0xe3000000, 0x0004, dst_reg, src_reg, REG_0, off); |
| break; |
| /* |
| * BPF_JMP / CALL |
| */ |
| case BPF_JMP | BPF_CALL: |
| { |
| /* |
| * b0 = (__bpf_call_base + imm)(b1, b2, b3, b4, b5) |
| */ |
| const u64 func = (u64)__bpf_call_base + imm; |
| |
| REG_SET_SEEN(BPF_REG_5); |
| jit->seen |= SEEN_FUNC; |
| /* lg %w1,<d(imm)>(%l) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_W1, REG_0, REG_L, |
| EMIT_CONST_U64(func)); |
| if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) { |
| /* brasl %r14,__s390_indirect_jump_r1 */ |
| EMIT6_PCREL_RILB(0xc0050000, REG_14, jit->r1_thunk_ip); |
| } else { |
| /* basr %r14,%w1 */ |
| EMIT2(0x0d00, REG_14, REG_W1); |
| } |
| /* lgr %b0,%r2: load return value into %b0 */ |
| EMIT4(0xb9040000, BPF_REG_0, REG_2); |
| if ((jit->seen & SEEN_SKB) && |
| bpf_helper_changes_pkt_data((void *)func)) { |
| /* lg %b1,ST_OFF_SKBP(%r15) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, BPF_REG_1, REG_0, |
| REG_15, STK_OFF_SKBP); |
| emit_load_skb_data_hlen(jit); |
| } |
| break; |
| } |
| case BPF_JMP | BPF_TAIL_CALL: |
| /* |
| * Implicit input: |
| * B1: pointer to ctx |
| * B2: pointer to bpf_array |
| * B3: index in bpf_array |
| */ |
| jit->seen |= SEEN_TAIL_CALL; |
| |
| /* |
| * if (index >= array->map.max_entries) |
| * goto out; |
| */ |
| |
| /* llgf %w1,map.max_entries(%b2) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2, |
| offsetof(struct bpf_array, map.max_entries)); |
| /* clgrj %b3,%w1,0xa,label0: if %b3 >= %w1 goto out */ |
| EMIT6_PCREL_LABEL(0xec000000, 0x0065, BPF_REG_3, |
| REG_W1, 0, 0xa); |
| |
| /* |
| * if (tail_call_cnt++ > MAX_TAIL_CALL_CNT) |
| * goto out; |
| */ |
| |
| if (jit->seen & SEEN_STACK) |
| off = STK_OFF_TCCNT + STK_OFF; |
| else |
| off = STK_OFF_TCCNT; |
| /* lhi %w0,1 */ |
| EMIT4_IMM(0xa7080000, REG_W0, 1); |
| /* laal %w1,%w0,off(%r15) */ |
| EMIT6_DISP_LH(0xeb000000, 0x00fa, REG_W1, REG_W0, REG_15, off); |
| /* clij %w1,MAX_TAIL_CALL_CNT,0x2,label0 */ |
| EMIT6_PCREL_IMM_LABEL(0xec000000, 0x007f, REG_W1, |
| MAX_TAIL_CALL_CNT, 0, 0x2); |
| |
| /* |
| * prog = array->ptrs[index]; |
| * if (prog == NULL) |
| * goto out; |
| */ |
| |
| /* sllg %r1,%b3,3: %r1 = index * 8 */ |
| EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, BPF_REG_3, REG_0, 3); |
| /* lg %r1,prog(%b2,%r1) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, BPF_REG_2, |
| REG_1, offsetof(struct bpf_array, ptrs)); |
| /* clgij %r1,0,0x8,label0 */ |
| EMIT6_PCREL_IMM_LABEL(0xec000000, 0x007d, REG_1, 0, 0, 0x8); |
| |
| /* |
| * Restore registers before calling function |
| */ |
| save_restore_regs(jit, REGS_RESTORE); |
| |
| /* |
| * goto *(prog->bpf_func + tail_call_start); |
| */ |
| |
| /* lg %r1,bpf_func(%r1) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, REG_1, REG_0, |
| offsetof(struct bpf_prog, bpf_func)); |
| /* bc 0xf,tail_call_start(%r1) */ |
| _EMIT4(0x47f01000 + jit->tail_call_start); |
| /* out: */ |
| jit->labels[0] = jit->prg; |
| break; |
| case BPF_JMP | BPF_EXIT: /* return b0 */ |
| last = (i == fp->len - 1) ? 1 : 0; |
| if (last && !(jit->seen & SEEN_RET0)) |
| break; |
| /* j <exit> */ |
| EMIT4_PCREL(0xa7f40000, jit->exit_ip - jit->prg); |
| break; |
| /* |
| * Branch relative (number of skipped instructions) to offset on |
| * condition. |
| * |
| * Condition code to mask mapping: |
| * |
| * CC | Description | Mask |
| * ------------------------------ |
| * 0 | Operands equal | 8 |
| * 1 | First operand low | 4 |
| * 2 | First operand high | 2 |
| * 3 | Unused | 1 |
| * |
| * For s390x relative branches: ip = ip + off_bytes |
| * For BPF relative branches: insn = insn + off_insns + 1 |
| * |
| * For example for s390x with offset 0 we jump to the branch |
| * instruction itself (loop) and for BPF with offset 0 we |
| * branch to the instruction behind the branch. |
| */ |
| case BPF_JMP | BPF_JA: /* if (true) */ |
| mask = 0xf000; /* j */ |
| goto branch_oc; |
| case BPF_JMP | BPF_JSGT | BPF_K: /* ((s64) dst > (s64) imm) */ |
| mask = 0x2000; /* jh */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JSLT | BPF_K: /* ((s64) dst < (s64) imm) */ |
| mask = 0x4000; /* jl */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JSGE | BPF_K: /* ((s64) dst >= (s64) imm) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JSLE | BPF_K: /* ((s64) dst <= (s64) imm) */ |
| mask = 0xc000; /* jle */ |
| goto branch_ks; |
| case BPF_JMP | BPF_JGT | BPF_K: /* (dst_reg > imm) */ |
| mask = 0x2000; /* jh */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JLT | BPF_K: /* (dst_reg < imm) */ |
| mask = 0x4000; /* jl */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JGE | BPF_K: /* (dst_reg >= imm) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JLE | BPF_K: /* (dst_reg <= imm) */ |
| mask = 0xc000; /* jle */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JNE | BPF_K: /* (dst_reg != imm) */ |
| mask = 0x7000; /* jne */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JEQ | BPF_K: /* (dst_reg == imm) */ |
| mask = 0x8000; /* je */ |
| goto branch_ku; |
| case BPF_JMP | BPF_JSET | BPF_K: /* (dst_reg & imm) */ |
| mask = 0x7000; /* jnz */ |
| /* lgfi %w1,imm (load sign extend imm) */ |
| EMIT6_IMM(0xc0010000, REG_W1, imm); |
| /* ngr %w1,%dst */ |
| EMIT4(0xb9800000, REG_W1, dst_reg); |
| goto branch_oc; |
| |
| case BPF_JMP | BPF_JSGT | BPF_X: /* ((s64) dst > (s64) src) */ |
| mask = 0x2000; /* jh */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JSLT | BPF_X: /* ((s64) dst < (s64) src) */ |
| mask = 0x4000; /* jl */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JSGE | BPF_X: /* ((s64) dst >= (s64) src) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JSLE | BPF_X: /* ((s64) dst <= (s64) src) */ |
| mask = 0xc000; /* jle */ |
| goto branch_xs; |
| case BPF_JMP | BPF_JGT | BPF_X: /* (dst > src) */ |
| mask = 0x2000; /* jh */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JLT | BPF_X: /* (dst < src) */ |
| mask = 0x4000; /* jl */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JGE | BPF_X: /* (dst >= src) */ |
| mask = 0xa000; /* jhe */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JLE | BPF_X: /* (dst <= src) */ |
| mask = 0xc000; /* jle */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JNE | BPF_X: /* (dst != src) */ |
| mask = 0x7000; /* jne */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JEQ | BPF_X: /* (dst == src) */ |
| mask = 0x8000; /* je */ |
| goto branch_xu; |
| case BPF_JMP | BPF_JSET | BPF_X: /* (dst & src) */ |
| mask = 0x7000; /* jnz */ |
| /* ngrk %w1,%dst,%src */ |
| EMIT4_RRF(0xb9e40000, REG_W1, dst_reg, src_reg); |
| goto branch_oc; |
| branch_ks: |
| /* lgfi %w1,imm (load sign extend imm) */ |
| EMIT6_IMM(0xc0010000, REG_W1, imm); |
| /* cgrj %dst,%w1,mask,off */ |
| EMIT6_PCREL(0xec000000, 0x0064, dst_reg, REG_W1, i, off, mask); |
| break; |
| branch_ku: |
| /* lgfi %w1,imm (load sign extend imm) */ |
| EMIT6_IMM(0xc0010000, REG_W1, imm); |
| /* clgrj %dst,%w1,mask,off */ |
| EMIT6_PCREL(0xec000000, 0x0065, dst_reg, REG_W1, i, off, mask); |
| break; |
| branch_xs: |
| /* cgrj %dst,%src,mask,off */ |
| EMIT6_PCREL(0xec000000, 0x0064, dst_reg, src_reg, i, off, mask); |
| break; |
| branch_xu: |
| /* clgrj %dst,%src,mask,off */ |
| EMIT6_PCREL(0xec000000, 0x0065, dst_reg, src_reg, i, off, mask); |
| break; |
| branch_oc: |
| /* brc mask,jmp_off (branch instruction needs 4 bytes) */ |
| jmp_off = addrs[i + off + 1] - (addrs[i + 1] - 4); |
| EMIT4_PCREL(0xa7040000 | mask << 8, jmp_off); |
| break; |
| /* |
| * BPF_LD |
| */ |
| case BPF_LD | BPF_ABS | BPF_B: /* b0 = *(u8 *) (skb->data+imm) */ |
| case BPF_LD | BPF_IND | BPF_B: /* b0 = *(u8 *) (skb->data+imm+src) */ |
| if ((BPF_MODE(insn->code) == BPF_ABS) && (imm >= 0)) |
| func_addr = __pa(sk_load_byte_pos); |
| else |
| func_addr = __pa(sk_load_byte); |
| goto call_fn; |
| case BPF_LD | BPF_ABS | BPF_H: /* b0 = *(u16 *) (skb->data+imm) */ |
| case BPF_LD | BPF_IND | BPF_H: /* b0 = *(u16 *) (skb->data+imm+src) */ |
| if ((BPF_MODE(insn->code) == BPF_ABS) && (imm >= 0)) |
| func_addr = __pa(sk_load_half_pos); |
| else |
| func_addr = __pa(sk_load_half); |
| goto call_fn; |
| case BPF_LD | BPF_ABS | BPF_W: /* b0 = *(u32 *) (skb->data+imm) */ |
| case BPF_LD | BPF_IND | BPF_W: /* b0 = *(u32 *) (skb->data+imm+src) */ |
| if ((BPF_MODE(insn->code) == BPF_ABS) && (imm >= 0)) |
| func_addr = __pa(sk_load_word_pos); |
| else |
| func_addr = __pa(sk_load_word); |
| goto call_fn; |
| call_fn: |
| jit->seen |= SEEN_SKB | SEEN_RET0 | SEEN_FUNC; |
| REG_SET_SEEN(REG_14); /* Return address of possible func call */ |
| |
| /* |
| * Implicit input: |
| * BPF_REG_6 (R7) : skb pointer |
| * REG_SKB_DATA (R12): skb data pointer (if no BPF_REG_AX) |
| * |
| * Calculated input: |
| * BPF_REG_2 (R3) : offset of byte(s) to fetch in skb |
| * BPF_REG_5 (R6) : return address |
| * |
| * Output: |
| * BPF_REG_0 (R14): data read from skb |
| * |
| * Scratch registers (BPF_REG_1-5) |
| */ |
| |
| /* Call function: llilf %w1,func_addr */ |
| EMIT6_IMM(0xc00f0000, REG_W1, func_addr); |
| |
| /* Offset: lgfi %b2,imm */ |
| EMIT6_IMM(0xc0010000, BPF_REG_2, imm); |
| if (BPF_MODE(insn->code) == BPF_IND) |
| /* agfr %b2,%src (%src is s32 here) */ |
| EMIT4(0xb9180000, BPF_REG_2, src_reg); |
| |
| /* Reload REG_SKB_DATA if BPF_REG_AX is used */ |
| if (jit->seen & SEEN_REG_AX) |
| /* lg %skb_data,data_off(%b6) */ |
| EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0, |
| BPF_REG_6, offsetof(struct sk_buff, data)); |
| /* basr %b5,%w1 (%b5 is call saved) */ |
| EMIT2(0x0d00, BPF_REG_5, REG_W1); |
| |
| /* |
| * Note: For fast access we jump directly after the |
| * jnz instruction from bpf_jit.S |
| */ |
| /* jnz <ret0> */ |
| EMIT4_PCREL(0xa7740000, jit->ret0_ip - jit->prg); |
| break; |
| default: /* too complex, give up */ |
| pr_err("Unknown opcode %02x\n", insn->code); |
| return -1; |
| } |
| return insn_count; |
| } |
| |
| /* |
| * Compile eBPF program into s390x code |
| */ |
| static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp) |
| { |
| int i, insn_count; |
| |
| jit->lit = jit->lit_start; |
| jit->prg = 0; |
| |
| bpf_jit_prologue(jit); |
| for (i = 0; i < fp->len; i += insn_count) { |
| insn_count = bpf_jit_insn(jit, fp, i); |
| if (insn_count < 0) |
| return -1; |
| /* Next instruction address */ |
| jit->addrs[i + insn_count] = jit->prg; |
| } |
| bpf_jit_epilogue(jit); |
| |
| jit->lit_start = jit->prg; |
| jit->size = jit->lit; |
| jit->size_prg = jit->prg; |
| return 0; |
| } |
| |
| /* |
| * Compile eBPF program "fp" |
| */ |
| struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) |
| { |
| struct bpf_prog *tmp, *orig_fp = fp; |
| struct bpf_binary_header *header; |
| bool tmp_blinded = false; |
| struct bpf_jit jit; |
| int pass; |
| |
| if (!bpf_jit_enable) |
| return orig_fp; |
| |
| tmp = bpf_jit_blind_constants(fp); |
| /* |
| * If blinding was requested and we failed during blinding, |
| * we must fall back to the interpreter. |
| */ |
| if (IS_ERR(tmp)) |
| return orig_fp; |
| if (tmp != fp) { |
| tmp_blinded = true; |
| fp = tmp; |
| } |
| |
| memset(&jit, 0, sizeof(jit)); |
| jit.addrs = kcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL); |
| if (jit.addrs == NULL) { |
| fp = orig_fp; |
| goto out; |
| } |
| /* |
| * Three initial passes: |
| * - 1/2: Determine clobbered registers |
| * - 3: Calculate program size and addrs arrray |
| */ |
| for (pass = 1; pass <= 3; pass++) { |
| if (bpf_jit_prog(&jit, fp)) { |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| } |
| /* |
| * Final pass: Allocate and generate program |
| */ |
| if (jit.size >= BPF_SIZE_MAX) { |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| header = bpf_jit_binary_alloc(jit.size, &jit.prg_buf, 2, jit_fill_hole); |
| if (!header) { |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| if (bpf_jit_prog(&jit, fp)) { |
| bpf_jit_binary_free(header); |
| fp = orig_fp; |
| goto free_addrs; |
| } |
| if (bpf_jit_enable > 1) { |
| bpf_jit_dump(fp->len, jit.size, pass, jit.prg_buf); |
| print_fn_code(jit.prg_buf, jit.size_prg); |
| } |
| bpf_jit_binary_lock_ro(header); |
| fp->bpf_func = (void *) jit.prg_buf; |
| fp->jited = 1; |
| fp->jited_len = jit.size; |
| free_addrs: |
| kfree(jit.addrs); |
| out: |
| if (tmp_blinded) |
| bpf_jit_prog_release_other(fp, fp == orig_fp ? |
| tmp : orig_fp); |
| return fp; |
| } |