| /* |
| * ADS1015 - Texas Instruments Analog-to-Digital Converter |
| * |
| * Copyright (c) 2016, Intel Corporation. |
| * |
| * This file is subject to the terms and conditions of version 2 of |
| * the GNU General Public License. See the file COPYING in the main |
| * directory of this archive for more details. |
| * |
| * IIO driver for ADS1015 ADC 7-bit I2C slave address: |
| * * 0x48 - ADDR connected to Ground |
| * * 0x49 - ADDR connected to Vdd |
| * * 0x4A - ADDR connected to SDA |
| * * 0x4B - ADDR connected to SCL |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| |
| #include <linux/platform_data/ads1015.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/types.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| |
| #define ADS1015_DRV_NAME "ads1015" |
| |
| #define ADS1015_CONV_REG 0x00 |
| #define ADS1015_CFG_REG 0x01 |
| #define ADS1015_LO_THRESH_REG 0x02 |
| #define ADS1015_HI_THRESH_REG 0x03 |
| |
| #define ADS1015_CFG_COMP_QUE_SHIFT 0 |
| #define ADS1015_CFG_COMP_LAT_SHIFT 2 |
| #define ADS1015_CFG_COMP_POL_SHIFT 3 |
| #define ADS1015_CFG_COMP_MODE_SHIFT 4 |
| #define ADS1015_CFG_DR_SHIFT 5 |
| #define ADS1015_CFG_MOD_SHIFT 8 |
| #define ADS1015_CFG_PGA_SHIFT 9 |
| #define ADS1015_CFG_MUX_SHIFT 12 |
| |
| #define ADS1015_CFG_COMP_QUE_MASK GENMASK(1, 0) |
| #define ADS1015_CFG_COMP_LAT_MASK BIT(2) |
| #define ADS1015_CFG_COMP_POL_MASK BIT(3) |
| #define ADS1015_CFG_COMP_MODE_MASK BIT(4) |
| #define ADS1015_CFG_DR_MASK GENMASK(7, 5) |
| #define ADS1015_CFG_MOD_MASK BIT(8) |
| #define ADS1015_CFG_PGA_MASK GENMASK(11, 9) |
| #define ADS1015_CFG_MUX_MASK GENMASK(14, 12) |
| |
| /* Comparator queue and disable field */ |
| #define ADS1015_CFG_COMP_DISABLE 3 |
| |
| /* Comparator polarity field */ |
| #define ADS1015_CFG_COMP_POL_LOW 0 |
| #define ADS1015_CFG_COMP_POL_HIGH 1 |
| |
| /* Comparator mode field */ |
| #define ADS1015_CFG_COMP_MODE_TRAD 0 |
| #define ADS1015_CFG_COMP_MODE_WINDOW 1 |
| |
| /* device operating modes */ |
| #define ADS1015_CONTINUOUS 0 |
| #define ADS1015_SINGLESHOT 1 |
| |
| #define ADS1015_SLEEP_DELAY_MS 2000 |
| #define ADS1015_DEFAULT_PGA 2 |
| #define ADS1015_DEFAULT_DATA_RATE 4 |
| #define ADS1015_DEFAULT_CHAN 0 |
| |
| enum chip_ids { |
| ADS1015, |
| ADS1115, |
| }; |
| |
| enum ads1015_channels { |
| ADS1015_AIN0_AIN1 = 0, |
| ADS1015_AIN0_AIN3, |
| ADS1015_AIN1_AIN3, |
| ADS1015_AIN2_AIN3, |
| ADS1015_AIN0, |
| ADS1015_AIN1, |
| ADS1015_AIN2, |
| ADS1015_AIN3, |
| ADS1015_TIMESTAMP, |
| }; |
| |
| static const unsigned int ads1015_data_rate[] = { |
| 128, 250, 490, 920, 1600, 2400, 3300, 3300 |
| }; |
| |
| static const unsigned int ads1115_data_rate[] = { |
| 8, 16, 32, 64, 128, 250, 475, 860 |
| }; |
| |
| /* |
| * Translation from PGA bits to full-scale positive and negative input voltage |
| * range in mV |
| */ |
| static int ads1015_fullscale_range[] = { |
| 6144, 4096, 2048, 1024, 512, 256, 256, 256 |
| }; |
| |
| /* |
| * Translation from COMP_QUE field value to the number of successive readings |
| * exceed the threshold values before an interrupt is generated |
| */ |
| static const int ads1015_comp_queue[] = { 1, 2, 4 }; |
| |
| static const struct iio_event_spec ads1015_events[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_ENABLE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_EITHER, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE) | |
| BIT(IIO_EV_INFO_PERIOD), |
| }, |
| }; |
| |
| #define ADS1015_V_CHAN(_chan, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .event_spec = ads1015_events, \ |
| .num_event_specs = ARRAY_SIZE(ads1015_events), \ |
| .datasheet_name = "AIN"#_chan, \ |
| } |
| |
| #define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .differential = 1, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .channel2 = _chan2, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .event_spec = ads1015_events, \ |
| .num_event_specs = ARRAY_SIZE(ads1015_events), \ |
| .datasheet_name = "AIN"#_chan"-AIN"#_chan2, \ |
| } |
| |
| #define ADS1115_V_CHAN(_chan, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 16, \ |
| .storagebits = 16, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .event_spec = ads1015_events, \ |
| .num_event_specs = ARRAY_SIZE(ads1015_events), \ |
| .datasheet_name = "AIN"#_chan, \ |
| } |
| |
| #define ADS1115_V_DIFF_CHAN(_chan, _chan2, _addr) { \ |
| .type = IIO_VOLTAGE, \ |
| .differential = 1, \ |
| .indexed = 1, \ |
| .address = _addr, \ |
| .channel = _chan, \ |
| .channel2 = _chan2, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = _addr, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 16, \ |
| .storagebits = 16, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| .event_spec = ads1015_events, \ |
| .num_event_specs = ARRAY_SIZE(ads1015_events), \ |
| .datasheet_name = "AIN"#_chan"-AIN"#_chan2, \ |
| } |
| |
| struct ads1015_thresh_data { |
| unsigned int comp_queue; |
| int high_thresh; |
| int low_thresh; |
| }; |
| |
| struct ads1015_data { |
| struct regmap *regmap; |
| /* |
| * Protects ADC ops, e.g: concurrent sysfs/buffered |
| * data reads, configuration updates |
| */ |
| struct mutex lock; |
| struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; |
| |
| unsigned int event_channel; |
| unsigned int comp_mode; |
| struct ads1015_thresh_data thresh_data[ADS1015_CHANNELS]; |
| |
| unsigned int *data_rate; |
| /* |
| * Set to true when the ADC is switched to the continuous-conversion |
| * mode and exits from a power-down state. This flag is used to avoid |
| * getting the stale result from the conversion register. |
| */ |
| bool conv_invalid; |
| }; |
| |
| static bool ads1015_event_channel_enabled(struct ads1015_data *data) |
| { |
| return (data->event_channel != ADS1015_CHANNELS); |
| } |
| |
| static void ads1015_event_channel_enable(struct ads1015_data *data, int chan, |
| int comp_mode) |
| { |
| WARN_ON(ads1015_event_channel_enabled(data)); |
| |
| data->event_channel = chan; |
| data->comp_mode = comp_mode; |
| } |
| |
| static void ads1015_event_channel_disable(struct ads1015_data *data, int chan) |
| { |
| data->event_channel = ADS1015_CHANNELS; |
| } |
| |
| static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case ADS1015_CFG_REG: |
| case ADS1015_LO_THRESH_REG: |
| case ADS1015_HI_THRESH_REG: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config ads1015_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = ADS1015_HI_THRESH_REG, |
| .writeable_reg = ads1015_is_writeable_reg, |
| }; |
| |
| static const struct iio_chan_spec ads1015_channels[] = { |
| ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), |
| ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), |
| ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), |
| ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), |
| ADS1015_V_CHAN(0, ADS1015_AIN0), |
| ADS1015_V_CHAN(1, ADS1015_AIN1), |
| ADS1015_V_CHAN(2, ADS1015_AIN2), |
| ADS1015_V_CHAN(3, ADS1015_AIN3), |
| IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), |
| }; |
| |
| static const struct iio_chan_spec ads1115_channels[] = { |
| ADS1115_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), |
| ADS1115_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), |
| ADS1115_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), |
| ADS1115_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), |
| ADS1115_V_CHAN(0, ADS1015_AIN0), |
| ADS1115_V_CHAN(1, ADS1015_AIN1), |
| ADS1115_V_CHAN(2, ADS1015_AIN2), |
| ADS1115_V_CHAN(3, ADS1015_AIN3), |
| IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), |
| }; |
| |
| static int ads1015_set_power_state(struct ads1015_data *data, bool on) |
| { |
| int ret; |
| struct device *dev = regmap_get_device(data->regmap); |
| |
| if (on) { |
| ret = pm_runtime_get_sync(dev); |
| if (ret < 0) |
| pm_runtime_put_noidle(dev); |
| } else { |
| pm_runtime_mark_last_busy(dev); |
| ret = pm_runtime_put_autosuspend(dev); |
| } |
| |
| return ret < 0 ? ret : 0; |
| } |
| |
| static |
| int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) |
| { |
| int ret, pga, dr, conv_time; |
| unsigned int old, mask, cfg; |
| |
| if (chan < 0 || chan >= ADS1015_CHANNELS) |
| return -EINVAL; |
| |
| ret = regmap_read(data->regmap, ADS1015_CFG_REG, &old); |
| if (ret) |
| return ret; |
| |
| pga = data->channel_data[chan].pga; |
| dr = data->channel_data[chan].data_rate; |
| mask = ADS1015_CFG_MUX_MASK | ADS1015_CFG_PGA_MASK | |
| ADS1015_CFG_DR_MASK; |
| cfg = chan << ADS1015_CFG_MUX_SHIFT | pga << ADS1015_CFG_PGA_SHIFT | |
| dr << ADS1015_CFG_DR_SHIFT; |
| |
| if (ads1015_event_channel_enabled(data)) { |
| mask |= ADS1015_CFG_COMP_QUE_MASK | ADS1015_CFG_COMP_MODE_MASK; |
| cfg |= data->thresh_data[chan].comp_queue << |
| ADS1015_CFG_COMP_QUE_SHIFT | |
| data->comp_mode << |
| ADS1015_CFG_COMP_MODE_SHIFT; |
| } |
| |
| cfg = (old & ~mask) | (cfg & mask); |
| |
| ret = regmap_write(data->regmap, ADS1015_CFG_REG, cfg); |
| if (ret) |
| return ret; |
| |
| if (old != cfg || data->conv_invalid) { |
| int dr_old = (old & ADS1015_CFG_DR_MASK) >> |
| ADS1015_CFG_DR_SHIFT; |
| |
| conv_time = DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr_old]); |
| conv_time += DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr]); |
| conv_time += conv_time / 10; /* 10% internal clock inaccuracy */ |
| usleep_range(conv_time, conv_time + 1); |
| data->conv_invalid = false; |
| } |
| |
| return regmap_read(data->regmap, ADS1015_CONV_REG, val); |
| } |
| |
| static irqreturn_t ads1015_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct ads1015_data *data = iio_priv(indio_dev); |
| s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding + 4x s16 timestamp */ |
| int chan, ret, res; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| mutex_lock(&data->lock); |
| chan = find_first_bit(indio_dev->active_scan_mask, |
| indio_dev->masklength); |
| ret = ads1015_get_adc_result(data, chan, &res); |
| if (ret < 0) { |
| mutex_unlock(&data->lock); |
| goto err; |
| } |
| |
| buf[0] = res; |
| mutex_unlock(&data->lock); |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, buf, |
| iio_get_time_ns(indio_dev)); |
| |
| err: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ads1015_set_scale(struct ads1015_data *data, |
| struct iio_chan_spec const *chan, |
| int scale, int uscale) |
| { |
| int i; |
| int fullscale = div_s64((scale * 1000000LL + uscale) << |
| (chan->scan_type.realbits - 1), 1000000); |
| |
| for (i = 0; i < ARRAY_SIZE(ads1015_fullscale_range); i++) { |
| if (ads1015_fullscale_range[i] == fullscale) { |
| data->channel_data[chan->address].pga = i; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) { |
| if (data->data_rate[i] == rate) { |
| data->channel_data[chan].data_rate = i; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int ads1015_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| int ret, idx; |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| mutex_lock(&data->lock); |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: { |
| int shift = chan->scan_type.shift; |
| |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| break; |
| |
| if (ads1015_event_channel_enabled(data) && |
| data->event_channel != chan->address) { |
| ret = -EBUSY; |
| goto release_direct; |
| } |
| |
| ret = ads1015_set_power_state(data, true); |
| if (ret < 0) |
| goto release_direct; |
| |
| ret = ads1015_get_adc_result(data, chan->address, val); |
| if (ret < 0) { |
| ads1015_set_power_state(data, false); |
| goto release_direct; |
| } |
| |
| *val = sign_extend32(*val >> shift, 15 - shift); |
| |
| ret = ads1015_set_power_state(data, false); |
| if (ret < 0) |
| goto release_direct; |
| |
| ret = IIO_VAL_INT; |
| release_direct: |
| iio_device_release_direct_mode(indio_dev); |
| break; |
| } |
| case IIO_CHAN_INFO_SCALE: |
| idx = data->channel_data[chan->address].pga; |
| *val = ads1015_fullscale_range[idx]; |
| *val2 = chan->scan_type.realbits - 1; |
| ret = IIO_VAL_FRACTIONAL_LOG2; |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| idx = data->channel_data[chan->address].data_rate; |
| *val = data->data_rate[idx]; |
| ret = IIO_VAL_INT; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int ads1015_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, |
| int val2, long mask) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->lock); |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: |
| ret = ads1015_set_scale(data, chan, val, val2); |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| ret = ads1015_set_data_rate(data, chan->address, val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int ads1015_read_event(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, enum iio_event_info info, int *val, |
| int *val2) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int ret; |
| unsigned int comp_queue; |
| int period; |
| int dr; |
| |
| mutex_lock(&data->lock); |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| *val = (dir == IIO_EV_DIR_RISING) ? |
| data->thresh_data[chan->address].high_thresh : |
| data->thresh_data[chan->address].low_thresh; |
| ret = IIO_VAL_INT; |
| break; |
| case IIO_EV_INFO_PERIOD: |
| dr = data->channel_data[chan->address].data_rate; |
| comp_queue = data->thresh_data[chan->address].comp_queue; |
| period = ads1015_comp_queue[comp_queue] * |
| USEC_PER_SEC / data->data_rate[dr]; |
| |
| *val = period / USEC_PER_SEC; |
| *val2 = period % USEC_PER_SEC; |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int ads1015_write_event(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, enum iio_event_info info, int val, |
| int val2) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int realbits = chan->scan_type.realbits; |
| int ret = 0; |
| long long period; |
| int i; |
| int dr; |
| |
| mutex_lock(&data->lock); |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| if (val >= 1 << (realbits - 1) || val < -1 << (realbits - 1)) { |
| ret = -EINVAL; |
| break; |
| } |
| if (dir == IIO_EV_DIR_RISING) |
| data->thresh_data[chan->address].high_thresh = val; |
| else |
| data->thresh_data[chan->address].low_thresh = val; |
| break; |
| case IIO_EV_INFO_PERIOD: |
| dr = data->channel_data[chan->address].data_rate; |
| period = val * USEC_PER_SEC + val2; |
| |
| for (i = 0; i < ARRAY_SIZE(ads1015_comp_queue) - 1; i++) { |
| if (period <= ads1015_comp_queue[i] * |
| USEC_PER_SEC / data->data_rate[dr]) |
| break; |
| } |
| data->thresh_data[chan->address].comp_queue = i; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int ads1015_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int ret = 0; |
| |
| mutex_lock(&data->lock); |
| if (data->event_channel == chan->address) { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| ret = 1; |
| break; |
| case IIO_EV_DIR_EITHER: |
| ret = (data->comp_mode == ADS1015_CFG_COMP_MODE_WINDOW); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| } |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int ads1015_enable_event_config(struct ads1015_data *data, |
| const struct iio_chan_spec *chan, int comp_mode) |
| { |
| int low_thresh = data->thresh_data[chan->address].low_thresh; |
| int high_thresh = data->thresh_data[chan->address].high_thresh; |
| int ret; |
| unsigned int val; |
| |
| if (ads1015_event_channel_enabled(data)) { |
| if (data->event_channel != chan->address || |
| (data->comp_mode == ADS1015_CFG_COMP_MODE_TRAD && |
| comp_mode == ADS1015_CFG_COMP_MODE_WINDOW)) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| if (comp_mode == ADS1015_CFG_COMP_MODE_TRAD) { |
| low_thresh = max(-1 << (chan->scan_type.realbits - 1), |
| high_thresh - 1); |
| } |
| ret = regmap_write(data->regmap, ADS1015_LO_THRESH_REG, |
| low_thresh << chan->scan_type.shift); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(data->regmap, ADS1015_HI_THRESH_REG, |
| high_thresh << chan->scan_type.shift); |
| if (ret) |
| return ret; |
| |
| ret = ads1015_set_power_state(data, true); |
| if (ret < 0) |
| return ret; |
| |
| ads1015_event_channel_enable(data, chan->address, comp_mode); |
| |
| ret = ads1015_get_adc_result(data, chan->address, &val); |
| if (ret) { |
| ads1015_event_channel_disable(data, chan->address); |
| ads1015_set_power_state(data, false); |
| } |
| |
| return ret; |
| } |
| |
| static int ads1015_disable_event_config(struct ads1015_data *data, |
| const struct iio_chan_spec *chan, int comp_mode) |
| { |
| int ret; |
| |
| if (!ads1015_event_channel_enabled(data)) |
| return 0; |
| |
| if (data->event_channel != chan->address) |
| return 0; |
| |
| if (data->comp_mode == ADS1015_CFG_COMP_MODE_TRAD && |
| comp_mode == ADS1015_CFG_COMP_MODE_WINDOW) |
| return 0; |
| |
| ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_COMP_QUE_MASK, |
| ADS1015_CFG_COMP_DISABLE << |
| ADS1015_CFG_COMP_QUE_SHIFT); |
| if (ret) |
| return ret; |
| |
| ads1015_event_channel_disable(data, chan->address); |
| |
| return ads1015_set_power_state(data, false); |
| } |
| |
| static int ads1015_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, int state) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int ret; |
| int comp_mode = (dir == IIO_EV_DIR_EITHER) ? |
| ADS1015_CFG_COMP_MODE_WINDOW : ADS1015_CFG_COMP_MODE_TRAD; |
| |
| mutex_lock(&data->lock); |
| |
| /* Prevent from enabling both buffer and event at a time */ |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) { |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| if (state) |
| ret = ads1015_enable_event_config(data, chan, comp_mode); |
| else |
| ret = ads1015_disable_event_config(data, chan, comp_mode); |
| |
| iio_device_release_direct_mode(indio_dev); |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static irqreturn_t ads1015_event_handler(int irq, void *priv) |
| { |
| struct iio_dev *indio_dev = priv; |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int val; |
| int ret; |
| |
| /* Clear the latched ALERT/RDY pin */ |
| ret = regmap_read(data->regmap, ADS1015_CONV_REG, &val); |
| if (ret) |
| return IRQ_HANDLED; |
| |
| if (ads1015_event_channel_enabled(data)) { |
| enum iio_event_direction dir; |
| u64 code; |
| |
| dir = data->comp_mode == ADS1015_CFG_COMP_MODE_TRAD ? |
| IIO_EV_DIR_RISING : IIO_EV_DIR_EITHER; |
| code = IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, data->event_channel, |
| IIO_EV_TYPE_THRESH, dir); |
| iio_push_event(indio_dev, code, iio_get_time_ns(indio_dev)); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ads1015_buffer_preenable(struct iio_dev *indio_dev) |
| { |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| /* Prevent from enabling both buffer and event at a time */ |
| if (ads1015_event_channel_enabled(data)) |
| return -EBUSY; |
| |
| return ads1015_set_power_state(iio_priv(indio_dev), true); |
| } |
| |
| static int ads1015_buffer_postdisable(struct iio_dev *indio_dev) |
| { |
| return ads1015_set_power_state(iio_priv(indio_dev), false); |
| } |
| |
| static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = { |
| .preenable = ads1015_buffer_preenable, |
| .postenable = iio_triggered_buffer_postenable, |
| .predisable = iio_triggered_buffer_predisable, |
| .postdisable = ads1015_buffer_postdisable, |
| .validate_scan_mask = &iio_validate_scan_mask_onehot, |
| }; |
| |
| static IIO_CONST_ATTR_NAMED(ads1015_scale_available, scale_available, |
| "3 2 1 0.5 0.25 0.125"); |
| static IIO_CONST_ATTR_NAMED(ads1115_scale_available, scale_available, |
| "0.1875 0.125 0.0625 0.03125 0.015625 0.007813"); |
| |
| static IIO_CONST_ATTR_NAMED(ads1015_sampling_frequency_available, |
| sampling_frequency_available, "128 250 490 920 1600 2400 3300"); |
| static IIO_CONST_ATTR_NAMED(ads1115_sampling_frequency_available, |
| sampling_frequency_available, "8 16 32 64 128 250 475 860"); |
| |
| static struct attribute *ads1015_attributes[] = { |
| &iio_const_attr_ads1015_scale_available.dev_attr.attr, |
| &iio_const_attr_ads1015_sampling_frequency_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group ads1015_attribute_group = { |
| .attrs = ads1015_attributes, |
| }; |
| |
| static struct attribute *ads1115_attributes[] = { |
| &iio_const_attr_ads1115_scale_available.dev_attr.attr, |
| &iio_const_attr_ads1115_sampling_frequency_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group ads1115_attribute_group = { |
| .attrs = ads1115_attributes, |
| }; |
| |
| static const struct iio_info ads1015_info = { |
| .driver_module = THIS_MODULE, |
| .read_raw = ads1015_read_raw, |
| .write_raw = ads1015_write_raw, |
| .read_event_value = ads1015_read_event, |
| .write_event_value = ads1015_write_event, |
| .read_event_config = ads1015_read_event_config, |
| .write_event_config = ads1015_write_event_config, |
| .attrs = &ads1015_attribute_group, |
| }; |
| |
| static const struct iio_info ads1115_info = { |
| .driver_module = THIS_MODULE, |
| .read_raw = ads1015_read_raw, |
| .write_raw = ads1015_write_raw, |
| .read_event_value = ads1015_read_event, |
| .write_event_value = ads1015_write_event, |
| .read_event_config = ads1015_read_event_config, |
| .write_event_config = ads1015_write_event_config, |
| .attrs = &ads1115_attribute_group, |
| }; |
| |
| #ifdef CONFIG_OF |
| static int ads1015_get_channels_config_of(struct i2c_client *client) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| struct device_node *node; |
| |
| if (!client->dev.of_node || |
| !of_get_next_child(client->dev.of_node, NULL)) |
| return -EINVAL; |
| |
| for_each_child_of_node(client->dev.of_node, node) { |
| u32 pval; |
| unsigned int channel; |
| unsigned int pga = ADS1015_DEFAULT_PGA; |
| unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; |
| |
| if (of_property_read_u32(node, "reg", &pval)) { |
| dev_err(&client->dev, "invalid reg on %pOF\n", |
| node); |
| continue; |
| } |
| |
| channel = pval; |
| if (channel >= ADS1015_CHANNELS) { |
| dev_err(&client->dev, |
| "invalid channel index %d on %pOF\n", |
| channel, node); |
| continue; |
| } |
| |
| if (!of_property_read_u32(node, "ti,gain", &pval)) { |
| pga = pval; |
| if (pga > 6) { |
| dev_err(&client->dev, "invalid gain on %pOF\n", |
| node); |
| of_node_put(node); |
| return -EINVAL; |
| } |
| } |
| |
| if (!of_property_read_u32(node, "ti,datarate", &pval)) { |
| data_rate = pval; |
| if (data_rate > 7) { |
| dev_err(&client->dev, |
| "invalid data_rate on %pOF\n", |
| node); |
| of_node_put(node); |
| return -EINVAL; |
| } |
| } |
| |
| data->channel_data[channel].pga = pga; |
| data->channel_data[channel].data_rate = data_rate; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static void ads1015_get_channels_config(struct i2c_client *client) |
| { |
| unsigned int k; |
| |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); |
| |
| /* prefer platform data */ |
| if (pdata) { |
| memcpy(data->channel_data, pdata->channel_data, |
| sizeof(data->channel_data)); |
| return; |
| } |
| |
| #ifdef CONFIG_OF |
| if (!ads1015_get_channels_config_of(client)) |
| return; |
| #endif |
| /* fallback on default configuration */ |
| for (k = 0; k < ADS1015_CHANNELS; ++k) { |
| data->channel_data[k].pga = ADS1015_DEFAULT_PGA; |
| data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; |
| } |
| } |
| |
| static int ads1015_set_conv_mode(struct ads1015_data *data, int mode) |
| { |
| return regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| ADS1015_CFG_MOD_MASK, |
| mode << ADS1015_CFG_MOD_SHIFT); |
| } |
| |
| static int ads1015_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct iio_dev *indio_dev; |
| struct ads1015_data *data; |
| int ret; |
| enum chip_ids chip; |
| int i; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| |
| mutex_init(&data->lock); |
| |
| indio_dev->dev.parent = &client->dev; |
| indio_dev->dev.of_node = client->dev.of_node; |
| indio_dev->name = ADS1015_DRV_NAME; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| if (client->dev.of_node) |
| chip = (enum chip_ids)of_device_get_match_data(&client->dev); |
| else |
| chip = id->driver_data; |
| switch (chip) { |
| case ADS1015: |
| indio_dev->channels = ads1015_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); |
| indio_dev->info = &ads1015_info; |
| data->data_rate = (unsigned int *) &ads1015_data_rate; |
| break; |
| case ADS1115: |
| indio_dev->channels = ads1115_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ads1115_channels); |
| indio_dev->info = &ads1115_info; |
| data->data_rate = (unsigned int *) &ads1115_data_rate; |
| break; |
| } |
| |
| data->event_channel = ADS1015_CHANNELS; |
| /* |
| * Set default lower and upper threshold to min and max value |
| * respectively. |
| */ |
| for (i = 0; i < ADS1015_CHANNELS; i++) { |
| int realbits = indio_dev->channels[i].scan_type.realbits; |
| |
| data->thresh_data[i].low_thresh = -1 << (realbits - 1); |
| data->thresh_data[i].high_thresh = (1 << (realbits - 1)) - 1; |
| } |
| |
| /* we need to keep this ABI the same as used by hwmon ADS1015 driver */ |
| ads1015_get_channels_config(client); |
| |
| data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config); |
| if (IS_ERR(data->regmap)) { |
| dev_err(&client->dev, "Failed to allocate register map\n"); |
| return PTR_ERR(data->regmap); |
| } |
| |
| ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, |
| ads1015_trigger_handler, |
| &ads1015_buffer_setup_ops); |
| if (ret < 0) { |
| dev_err(&client->dev, "iio triggered buffer setup failed\n"); |
| return ret; |
| } |
| |
| if (client->irq) { |
| unsigned long irq_trig = |
| irqd_get_trigger_type(irq_get_irq_data(client->irq)); |
| unsigned int cfg_comp_mask = ADS1015_CFG_COMP_QUE_MASK | |
| ADS1015_CFG_COMP_LAT_MASK | ADS1015_CFG_COMP_POL_MASK; |
| unsigned int cfg_comp = |
| ADS1015_CFG_COMP_DISABLE << ADS1015_CFG_COMP_QUE_SHIFT | |
| 1 << ADS1015_CFG_COMP_LAT_SHIFT; |
| |
| switch (irq_trig) { |
| case IRQF_TRIGGER_LOW: |
| cfg_comp |= ADS1015_CFG_COMP_POL_LOW << |
| ADS1015_CFG_COMP_POL_SHIFT; |
| break; |
| case IRQF_TRIGGER_HIGH: |
| cfg_comp |= ADS1015_CFG_COMP_POL_HIGH << |
| ADS1015_CFG_COMP_POL_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, |
| cfg_comp_mask, cfg_comp); |
| if (ret) |
| return ret; |
| |
| ret = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, ads1015_event_handler, |
| irq_trig | IRQF_ONESHOT, |
| client->name, indio_dev); |
| if (ret) |
| return ret; |
| } |
| |
| ret = ads1015_set_conv_mode(data, ADS1015_CONTINUOUS); |
| if (ret) |
| return ret; |
| |
| data->conv_invalid = true; |
| |
| ret = pm_runtime_set_active(&client->dev); |
| if (ret) |
| return ret; |
| pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS); |
| pm_runtime_use_autosuspend(&client->dev); |
| pm_runtime_enable(&client->dev); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to register IIO device\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ads1015_remove(struct i2c_client *client) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| pm_runtime_put_noidle(&client->dev); |
| |
| /* power down single shot mode */ |
| return ads1015_set_conv_mode(data, ADS1015_SINGLESHOT); |
| } |
| |
| #ifdef CONFIG_PM |
| static int ads1015_runtime_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| |
| return ads1015_set_conv_mode(data, ADS1015_SINGLESHOT); |
| } |
| |
| static int ads1015_runtime_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct ads1015_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| ret = ads1015_set_conv_mode(data, ADS1015_CONTINUOUS); |
| if (!ret) |
| data->conv_invalid = true; |
| |
| return ret; |
| } |
| #endif |
| |
| static const struct dev_pm_ops ads1015_pm_ops = { |
| SET_RUNTIME_PM_OPS(ads1015_runtime_suspend, |
| ads1015_runtime_resume, NULL) |
| }; |
| |
| static const struct i2c_device_id ads1015_id[] = { |
| {"ads1015", ADS1015}, |
| {"ads1115", ADS1115}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ads1015_id); |
| |
| static const struct of_device_id ads1015_of_match[] = { |
| { |
| .compatible = "ti,ads1015", |
| .data = (void *)ADS1015 |
| }, |
| { |
| .compatible = "ti,ads1115", |
| .data = (void *)ADS1115 |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, ads1015_of_match); |
| |
| static struct i2c_driver ads1015_driver = { |
| .driver = { |
| .name = ADS1015_DRV_NAME, |
| .of_match_table = ads1015_of_match, |
| .pm = &ads1015_pm_ops, |
| }, |
| .probe = ads1015_probe, |
| .remove = ads1015_remove, |
| .id_table = ads1015_id, |
| }; |
| |
| module_i2c_driver(ads1015_driver); |
| |
| MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); |
| MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver"); |
| MODULE_LICENSE("GPL v2"); |