blob: cf5812188c3751e12ea66c4f1d3a6f1dea36febc [file] [log] [blame]
/*
* Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com>
* Copyright (c) 2013 Synaptics Incorporated
* Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com>
* Copyright (c) 2014 Red Hat, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/kernel.h>
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/rmi.h>
#include "hid-ids.h"
#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */
#define RMI_WRITE_REPORT_ID 0x09 /* Output Report */
#define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */
#define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */
#define RMI_ATTN_REPORT_ID 0x0c /* Input Report */
#define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */
/* flags */
#define RMI_READ_REQUEST_PENDING 0
#define RMI_READ_DATA_PENDING 1
#define RMI_STARTED 2
/* device flags */
#define RMI_DEVICE BIT(0)
#define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1)
/*
* retrieve the ctrl registers
* the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
* and there is no way to know if the first 20 bytes are here or not.
* We use only the first 12 bytes, so get only them.
*/
#define RMI_F11_CTRL_REG_COUNT 12
enum rmi_mode_type {
RMI_MODE_OFF = 0,
RMI_MODE_ATTN_REPORTS = 1,
RMI_MODE_NO_PACKED_ATTN_REPORTS = 2,
};
/**
* struct rmi_data - stores information for hid communication
*
* @page_mutex: Locks current page to avoid changing pages in unexpected ways.
* @page: Keeps track of the current virtual page
* @xport: transport device to be registered with the RMI4 core.
*
* @wait: Used for waiting for read data
*
* @writeReport: output buffer when writing RMI registers
* @readReport: input buffer when reading RMI registers
*
* @input_report_size: size of an input report (advertised by HID)
* @output_report_size: size of an output report (advertised by HID)
*
* @flags: flags for the current device (started, reading, etc...)
*
* @reset_work: worker which will be called in case of a mouse report
* @hdev: pointer to the struct hid_device
*
* @device_flags: flags which describe the device
*
* @domain: the IRQ domain allocated for this RMI4 device
* @rmi_irq: the irq that will be used to generate events to rmi-core
*/
struct rmi_data {
struct mutex page_mutex;
int page;
struct rmi_transport_dev xport;
wait_queue_head_t wait;
u8 *writeReport;
u8 *readReport;
u32 input_report_size;
u32 output_report_size;
unsigned long flags;
struct work_struct reset_work;
struct hid_device *hdev;
unsigned long device_flags;
struct irq_domain *domain;
int rmi_irq;
};
#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
/**
* rmi_set_page - Set RMI page
* @hdev: The pointer to the hid_device struct
* @page: The new page address.
*
* RMI devices have 16-bit addressing, but some of the physical
* implementations (like SMBus) only have 8-bit addressing. So RMI implements
* a page address at 0xff of every page so we can reliable page addresses
* every 256 registers.
*
* The page_mutex lock must be held when this function is entered.
*
* Returns zero on success, non-zero on failure.
*/
static int rmi_set_page(struct hid_device *hdev, u8 page)
{
struct rmi_data *data = hid_get_drvdata(hdev);
int retval;
data->writeReport[0] = RMI_WRITE_REPORT_ID;
data->writeReport[1] = 1;
data->writeReport[2] = 0xFF;
data->writeReport[4] = page;
retval = rmi_write_report(hdev, data->writeReport,
data->output_report_size);
if (retval != data->output_report_size) {
dev_err(&hdev->dev,
"%s: set page failed: %d.", __func__, retval);
return retval;
}
data->page = page;
return 0;
}
static int rmi_set_mode(struct hid_device *hdev, u8 mode)
{
int ret;
const u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
u8 *buf;
buf = kmemdup(txbuf, sizeof(txbuf), GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, buf,
sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
kfree(buf);
if (ret < 0) {
dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
ret);
return ret;
}
return 0;
}
static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
{
int ret;
ret = hid_hw_output_report(hdev, (void *)report, len);
if (ret < 0) {
dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret);
return ret;
}
return ret;
}
static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
void *buf, size_t len)
{
struct rmi_data *data = container_of(xport, struct rmi_data, xport);
struct hid_device *hdev = data->hdev;
int ret;
int bytes_read;
int bytes_needed;
int retries;
int read_input_count;
mutex_lock(&data->page_mutex);
if (RMI_PAGE(addr) != data->page) {
ret = rmi_set_page(hdev, RMI_PAGE(addr));
if (ret < 0)
goto exit;
}
for (retries = 5; retries > 0; retries--) {
data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
data->writeReport[1] = 0; /* old 1 byte read count */
data->writeReport[2] = addr & 0xFF;
data->writeReport[3] = (addr >> 8) & 0xFF;
data->writeReport[4] = len & 0xFF;
data->writeReport[5] = (len >> 8) & 0xFF;
set_bit(RMI_READ_REQUEST_PENDING, &data->flags);
ret = rmi_write_report(hdev, data->writeReport,
data->output_report_size);
if (ret != data->output_report_size) {
clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
dev_err(&hdev->dev,
"failed to write request output report (%d)\n",
ret);
goto exit;
}
bytes_read = 0;
bytes_needed = len;
while (bytes_read < len) {
if (!wait_event_timeout(data->wait,
test_bit(RMI_READ_DATA_PENDING, &data->flags),
msecs_to_jiffies(1000))) {
hid_warn(hdev, "%s: timeout elapsed\n",
__func__);
ret = -EAGAIN;
break;
}
read_input_count = data->readReport[1];
memcpy(buf + bytes_read, &data->readReport[2],
read_input_count < bytes_needed ?
read_input_count : bytes_needed);
bytes_read += read_input_count;
bytes_needed -= read_input_count;
clear_bit(RMI_READ_DATA_PENDING, &data->flags);
}
if (ret >= 0) {
ret = 0;
break;
}
}
exit:
clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
mutex_unlock(&data->page_mutex);
return ret;
}
static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr,
const void *buf, size_t len)
{
struct rmi_data *data = container_of(xport, struct rmi_data, xport);
struct hid_device *hdev = data->hdev;
int ret;
mutex_lock(&data->page_mutex);
if (RMI_PAGE(addr) != data->page) {
ret = rmi_set_page(hdev, RMI_PAGE(addr));
if (ret < 0)
goto exit;
}
data->writeReport[0] = RMI_WRITE_REPORT_ID;
data->writeReport[1] = len;
data->writeReport[2] = addr & 0xFF;
data->writeReport[3] = (addr >> 8) & 0xFF;
memcpy(&data->writeReport[4], buf, len);
ret = rmi_write_report(hdev, data->writeReport,
data->output_report_size);
if (ret < 0) {
dev_err(&hdev->dev,
"failed to write request output report (%d)\n",
ret);
goto exit;
}
ret = 0;
exit:
mutex_unlock(&data->page_mutex);
return ret;
}
static int rmi_reset_attn_mode(struct hid_device *hdev)
{
struct rmi_data *data = hid_get_drvdata(hdev);
struct rmi_device *rmi_dev = data->xport.rmi_dev;
int ret;
ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
if (ret)
return ret;
if (test_bit(RMI_STARTED, &data->flags))
ret = rmi_dev->driver->reset_handler(rmi_dev);
return ret;
}
static void rmi_reset_work(struct work_struct *work)
{
struct rmi_data *hdata = container_of(work, struct rmi_data,
reset_work);
/* switch the device to RMI if we receive a generic mouse report */
rmi_reset_attn_mode(hdata->hdev);
}
static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
unsigned long flags;
if (!(test_bit(RMI_STARTED, &hdata->flags)))
return 0;
local_irq_save(flags);
rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2);
generic_handle_irq(hdata->rmi_irq);
local_irq_restore(flags);
return 1;
}
static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) {
hid_dbg(hdev, "no read request pending\n");
return 0;
}
memcpy(hdata->readReport, data, size < hdata->input_report_size ?
size : hdata->input_report_size);
set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
wake_up(&hdata->wait);
return 1;
}
static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size)
{
int valid_size = size;
/*
* On the Dell XPS 13 9333, the bus sometimes get confused and fills
* the report with a sentinel value "ff". Synaptics told us that such
* behavior does not comes from the touchpad itself, so we filter out
* such reports here.
*/
while ((data[valid_size - 1] == 0xff) && valid_size > 0)
valid_size--;
return valid_size;
}
static int rmi_raw_event(struct hid_device *hdev,
struct hid_report *report, u8 *data, int size)
{
size = rmi_check_sanity(hdev, data, size);
if (size < 2)
return 0;
switch (data[0]) {
case RMI_READ_DATA_REPORT_ID:
return rmi_read_data_event(hdev, data, size);
case RMI_ATTN_REPORT_ID:
return rmi_input_event(hdev, data, size);
default:
return 1;
}
return 0;
}
static int rmi_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct rmi_data *data = hid_get_drvdata(hdev);
if ((data->device_flags & RMI_DEVICE) &&
(field->application == HID_GD_POINTER ||
field->application == HID_GD_MOUSE)) {
if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) {
if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)
return 0;
if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y)
&& !value)
return 1;
}
schedule_work(&data->reset_work);
return 1;
}
return 0;
}
#ifdef CONFIG_PM
static int rmi_suspend(struct hid_device *hdev, pm_message_t message)
{
struct rmi_data *data = hid_get_drvdata(hdev);
struct rmi_device *rmi_dev = data->xport.rmi_dev;
int ret;
if (!(data->device_flags & RMI_DEVICE))
return 0;
ret = rmi_driver_suspend(rmi_dev, false);
if (ret) {
hid_warn(hdev, "Failed to suspend device: %d\n", ret);
return ret;
}
return 0;
}
static int rmi_post_resume(struct hid_device *hdev)
{
struct rmi_data *data = hid_get_drvdata(hdev);
struct rmi_device *rmi_dev = data->xport.rmi_dev;
int ret;
if (!(data->device_flags & RMI_DEVICE))
return 0;
/* Make sure the HID device is ready to receive events */
ret = hid_hw_open(hdev);
if (ret)
return ret;
ret = rmi_reset_attn_mode(hdev);
if (ret)
goto out;
ret = rmi_driver_resume(rmi_dev, false);
if (ret) {
hid_warn(hdev, "Failed to resume device: %d\n", ret);
goto out;
}
out:
hid_hw_close(hdev);
return ret;
}
#endif /* CONFIG_PM */
static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr)
{
struct rmi_data *data = container_of(xport, struct rmi_data, xport);
struct hid_device *hdev = data->hdev;
return rmi_reset_attn_mode(hdev);
}
static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
struct rmi_data *data = hid_get_drvdata(hdev);
struct input_dev *input = hi->input;
int ret = 0;
if (!(data->device_flags & RMI_DEVICE))
return 0;
data->xport.input = input;
hid_dbg(hdev, "Opening low level driver\n");
ret = hid_hw_open(hdev);
if (ret)
return ret;
/* Allow incoming hid reports */
hid_device_io_start(hdev);
ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
if (ret < 0) {
dev_err(&hdev->dev, "failed to set rmi mode\n");
goto exit;
}
ret = rmi_set_page(hdev, 0);
if (ret < 0) {
dev_err(&hdev->dev, "failed to set page select to 0.\n");
goto exit;
}
ret = rmi_register_transport_device(&data->xport);
if (ret < 0) {
dev_err(&hdev->dev, "failed to register transport driver\n");
goto exit;
}
set_bit(RMI_STARTED, &data->flags);
exit:
hid_device_io_stop(hdev);
hid_hw_close(hdev);
return ret;
}
static int rmi_input_mapping(struct hid_device *hdev,
struct hid_input *hi, struct hid_field *field,
struct hid_usage *usage, unsigned long **bit, int *max)
{
struct rmi_data *data = hid_get_drvdata(hdev);
/*
* we want to make HID ignore the advertised HID collection
* for RMI deivces
*/
if (data->device_flags & RMI_DEVICE) {
if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) &&
((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON))
return 0;
return -1;
}
return 0;
}
static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
unsigned id, struct hid_report **report)
{
int i;
*report = hdev->report_enum[type].report_id_hash[id];
if (*report) {
for (i = 0; i < (*report)->maxfield; i++) {
unsigned app = (*report)->field[i]->application;
if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR)
return 1;
}
}
return 0;
}
static struct rmi_device_platform_data rmi_hid_pdata = {
.sensor_pdata = {
.sensor_type = rmi_sensor_touchpad,
.axis_align.flip_y = true,
.dribble = RMI_REG_STATE_ON,
.palm_detect = RMI_REG_STATE_OFF,
},
};
static const struct rmi_transport_ops hid_rmi_ops = {
.write_block = rmi_hid_write_block,
.read_block = rmi_hid_read_block,
.reset = rmi_hid_reset,
};
static void rmi_irq_teardown(void *data)
{
struct rmi_data *hdata = data;
struct irq_domain *domain = hdata->domain;
if (!domain)
return;
irq_dispose_mapping(irq_find_mapping(domain, 0));
irq_domain_remove(domain);
hdata->domain = NULL;
hdata->rmi_irq = 0;
}
static int rmi_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw_irq_num)
{
irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
return 0;
}
static const struct irq_domain_ops rmi_irq_ops = {
.map = rmi_irq_map,
};
static int rmi_setup_irq_domain(struct hid_device *hdev)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
int ret;
hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1,
&rmi_irq_ops, hdata);
if (!hdata->domain)
return -ENOMEM;
ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata);
if (ret)
return ret;
hdata->rmi_irq = irq_create_mapping(hdata->domain, 0);
if (hdata->rmi_irq <= 0) {
hid_err(hdev, "Can't allocate an IRQ\n");
return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO;
}
return 0;
}
static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct rmi_data *data = NULL;
int ret;
size_t alloc_size;
struct hid_report *input_report;
struct hid_report *output_report;
struct hid_report *feature_report;
data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
INIT_WORK(&data->reset_work, rmi_reset_work);
data->hdev = hdev;
hid_set_drvdata(hdev, data);
hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
return ret;
}
if (id->driver_data)
data->device_flags = id->driver_data;
/*
* Check for the RMI specific report ids. If they are misisng
* simply return and let the events be processed by hid-input
*/
if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT,
RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) {
hid_dbg(hdev, "device does not have set mode feature report\n");
goto start;
}
if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT,
RMI_ATTN_REPORT_ID, &input_report)) {
hid_dbg(hdev, "device does not have attention input report\n");
goto start;
}
data->input_report_size = hid_report_len(input_report);
if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT,
RMI_WRITE_REPORT_ID, &output_report)) {
hid_dbg(hdev,
"device does not have rmi write output report\n");
goto start;
}
data->output_report_size = hid_report_len(output_report);
data->device_flags |= RMI_DEVICE;
alloc_size = data->output_report_size + data->input_report_size;
data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
if (!data->writeReport) {
hid_err(hdev, "failed to allocate buffer for HID reports\n");
return -ENOMEM;
}
data->readReport = data->writeReport + data->output_report_size;
init_waitqueue_head(&data->wait);
mutex_init(&data->page_mutex);
ret = rmi_setup_irq_domain(hdev);
if (ret) {
hid_err(hdev, "failed to allocate IRQ domain\n");
return ret;
}
if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
rmi_hid_pdata.f30_data.disable = true;
data->xport.dev = hdev->dev.parent;
data->xport.pdata = rmi_hid_pdata;
data->xport.pdata.irq = data->rmi_irq;
data->xport.proto_name = "hid";
data->xport.ops = &hid_rmi_ops;
start:
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
hid_err(hdev, "hw start failed\n");
return ret;
}
return 0;
}
static void rmi_remove(struct hid_device *hdev)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
clear_bit(RMI_STARTED, &hdata->flags);
cancel_work_sync(&hdata->reset_work);
rmi_unregister_transport_device(&hdata->xport);
hid_hw_stop(hdev);
}
static const struct hid_device_id rmi_id[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14),
.driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS },
{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) },
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
{ }
};
MODULE_DEVICE_TABLE(hid, rmi_id);
static struct hid_driver rmi_driver = {
.name = "hid-rmi",
.id_table = rmi_id,
.probe = rmi_probe,
.remove = rmi_remove,
.event = rmi_event,
.raw_event = rmi_raw_event,
.input_mapping = rmi_input_mapping,
.input_configured = rmi_input_configured,
#ifdef CONFIG_PM
.suspend = rmi_suspend,
.resume = rmi_post_resume,
.reset_resume = rmi_post_resume,
#endif
};
module_hid_driver(rmi_driver);
MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
MODULE_DESCRIPTION("RMI HID driver");
MODULE_LICENSE("GPL");