| /* |
| * s390 specific pci instructions |
| * |
| * Copyright IBM Corp. 2013 |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <asm/facility.h> |
| #include <asm/pci_insn.h> |
| #include <asm/pci_debug.h> |
| #include <asm/processor.h> |
| |
| #define ZPCI_INSN_BUSY_DELAY 1 /* 1 microsecond */ |
| |
| static inline void zpci_err_insn(u8 cc, u8 status, u64 req, u64 offset) |
| { |
| struct { |
| u64 req; |
| u64 offset; |
| u8 cc; |
| u8 status; |
| } __packed data = {req, offset, cc, status}; |
| |
| zpci_err_hex(&data, sizeof(data)); |
| } |
| |
| /* Modify PCI Function Controls */ |
| static inline u8 __mpcifc(u64 req, struct zpci_fib *fib, u8 *status) |
| { |
| u8 cc; |
| |
| asm volatile ( |
| " .insn rxy,0xe300000000d0,%[req],%[fib]\n" |
| " ipm %[cc]\n" |
| " srl %[cc],28\n" |
| : [cc] "=d" (cc), [req] "+d" (req), [fib] "+Q" (*fib) |
| : : "cc"); |
| *status = req >> 24 & 0xff; |
| return cc; |
| } |
| |
| u8 zpci_mod_fc(u64 req, struct zpci_fib *fib, u8 *status) |
| { |
| u8 cc; |
| |
| do { |
| cc = __mpcifc(req, fib, status); |
| if (cc == 2) |
| msleep(ZPCI_INSN_BUSY_DELAY); |
| } while (cc == 2); |
| |
| if (cc) |
| zpci_err_insn(cc, *status, req, 0); |
| |
| return cc; |
| } |
| |
| /* Refresh PCI Translations */ |
| static inline u8 __rpcit(u64 fn, u64 addr, u64 range, u8 *status) |
| { |
| register u64 __addr asm("2") = addr; |
| register u64 __range asm("3") = range; |
| u8 cc; |
| |
| asm volatile ( |
| " .insn rre,0xb9d30000,%[fn],%[addr]\n" |
| " ipm %[cc]\n" |
| " srl %[cc],28\n" |
| : [cc] "=d" (cc), [fn] "+d" (fn) |
| : [addr] "d" (__addr), "d" (__range) |
| : "cc"); |
| *status = fn >> 24 & 0xff; |
| return cc; |
| } |
| |
| int zpci_refresh_trans(u64 fn, u64 addr, u64 range) |
| { |
| u8 cc, status; |
| |
| do { |
| cc = __rpcit(fn, addr, range, &status); |
| if (cc == 2) |
| udelay(ZPCI_INSN_BUSY_DELAY); |
| } while (cc == 2); |
| |
| if (cc) |
| zpci_err_insn(cc, status, addr, range); |
| |
| return (cc) ? -EIO : 0; |
| } |
| |
| /* Set Interruption Controls */ |
| int zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc) |
| { |
| if (!test_facility(72)) |
| return -EIO; |
| asm volatile ( |
| " .insn rsy,0xeb00000000d1,%[ctl],%[isc],%[u]\n" |
| : : [ctl] "d" (ctl), [isc] "d" (isc << 27), [u] "Q" (*unused)); |
| return 0; |
| } |
| |
| /* PCI Load */ |
| static inline int ____pcilg(u64 *data, u64 req, u64 offset, u8 *status) |
| { |
| register u64 __req asm("2") = req; |
| register u64 __offset asm("3") = offset; |
| int cc = -ENXIO; |
| u64 __data; |
| |
| asm volatile ( |
| " .insn rre,0xb9d20000,%[data],%[req]\n" |
| "0: ipm %[cc]\n" |
| " srl %[cc],28\n" |
| "1:\n" |
| EX_TABLE(0b, 1b) |
| : [cc] "+d" (cc), [data] "=d" (__data), [req] "+d" (__req) |
| : "d" (__offset) |
| : "cc"); |
| *status = __req >> 24 & 0xff; |
| *data = __data; |
| return cc; |
| } |
| |
| static inline int __pcilg(u64 *data, u64 req, u64 offset, u8 *status) |
| { |
| u64 __data; |
| int cc; |
| |
| cc = ____pcilg(&__data, req, offset, status); |
| if (!cc) |
| *data = __data; |
| |
| return cc; |
| } |
| |
| int zpci_load(u64 *data, u64 req, u64 offset) |
| { |
| u8 status; |
| int cc; |
| |
| do { |
| cc = __pcilg(data, req, offset, &status); |
| if (cc == 2) |
| udelay(ZPCI_INSN_BUSY_DELAY); |
| } while (cc == 2); |
| |
| if (cc) |
| zpci_err_insn(cc, status, req, offset); |
| |
| return (cc > 0) ? -EIO : cc; |
| } |
| EXPORT_SYMBOL_GPL(zpci_load); |
| |
| /* PCI Store */ |
| static inline int __pcistg(u64 data, u64 req, u64 offset, u8 *status) |
| { |
| register u64 __req asm("2") = req; |
| register u64 __offset asm("3") = offset; |
| int cc = -ENXIO; |
| |
| asm volatile ( |
| " .insn rre,0xb9d00000,%[data],%[req]\n" |
| "0: ipm %[cc]\n" |
| " srl %[cc],28\n" |
| "1:\n" |
| EX_TABLE(0b, 1b) |
| : [cc] "+d" (cc), [req] "+d" (__req) |
| : "d" (__offset), [data] "d" (data) |
| : "cc"); |
| *status = __req >> 24 & 0xff; |
| return cc; |
| } |
| |
| int zpci_store(u64 data, u64 req, u64 offset) |
| { |
| u8 status; |
| int cc; |
| |
| do { |
| cc = __pcistg(data, req, offset, &status); |
| if (cc == 2) |
| udelay(ZPCI_INSN_BUSY_DELAY); |
| } while (cc == 2); |
| |
| if (cc) |
| zpci_err_insn(cc, status, req, offset); |
| |
| return (cc > 0) ? -EIO : cc; |
| } |
| EXPORT_SYMBOL_GPL(zpci_store); |
| |
| /* PCI Store Block */ |
| static inline int __pcistb(const u64 *data, u64 req, u64 offset, u8 *status) |
| { |
| int cc = -ENXIO; |
| |
| asm volatile ( |
| " .insn rsy,0xeb00000000d0,%[req],%[offset],%[data]\n" |
| "0: ipm %[cc]\n" |
| " srl %[cc],28\n" |
| "1:\n" |
| EX_TABLE(0b, 1b) |
| : [cc] "+d" (cc), [req] "+d" (req) |
| : [offset] "d" (offset), [data] "Q" (*data) |
| : "cc"); |
| *status = req >> 24 & 0xff; |
| return cc; |
| } |
| |
| int zpci_store_block(const u64 *data, u64 req, u64 offset) |
| { |
| u8 status; |
| int cc; |
| |
| do { |
| cc = __pcistb(data, req, offset, &status); |
| if (cc == 2) |
| udelay(ZPCI_INSN_BUSY_DELAY); |
| } while (cc == 2); |
| |
| if (cc) |
| zpci_err_insn(cc, status, req, offset); |
| |
| return (cc > 0) ? -EIO : cc; |
| } |
| EXPORT_SYMBOL_GPL(zpci_store_block); |