|  | /* | 
|  | * Support Infineon TLE62x0 driver chips | 
|  | * | 
|  | * Copyright (c) 2007 Simtec Electronics | 
|  | *	Ben Dooks, <ben@simtec.co.uk> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/spi/tle62x0.h> | 
|  |  | 
|  |  | 
|  | #define CMD_READ	0x00 | 
|  | #define CMD_SET		0xff | 
|  |  | 
|  | #define DIAG_NORMAL	0x03 | 
|  | #define DIAG_OVERLOAD	0x02 | 
|  | #define DIAG_OPEN	0x01 | 
|  | #define DIAG_SHORTGND	0x00 | 
|  |  | 
|  | struct tle62x0_state { | 
|  | struct spi_device	*us; | 
|  | struct mutex		lock; | 
|  | unsigned int		nr_gpio; | 
|  | unsigned int		gpio_state; | 
|  |  | 
|  | unsigned char		tx_buff[4]; | 
|  | unsigned char		rx_buff[4]; | 
|  | }; | 
|  |  | 
|  | static int to_gpio_num(struct device_attribute *attr); | 
|  |  | 
|  | static inline int tle62x0_write(struct tle62x0_state *st) | 
|  | { | 
|  | unsigned char *buff = st->tx_buff; | 
|  | unsigned int gpio_state = st->gpio_state; | 
|  |  | 
|  | buff[0] = CMD_SET; | 
|  |  | 
|  | if (st->nr_gpio == 16) { | 
|  | buff[1] = gpio_state >> 8; | 
|  | buff[2] = gpio_state; | 
|  | } else { | 
|  | buff[1] = gpio_state; | 
|  | } | 
|  |  | 
|  | dev_dbg(&st->us->dev, "buff %3ph\n", buff); | 
|  |  | 
|  | return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2); | 
|  | } | 
|  |  | 
|  | static inline int tle62x0_read(struct tle62x0_state *st) | 
|  | { | 
|  | unsigned char *txbuff = st->tx_buff; | 
|  | struct spi_transfer xfer = { | 
|  | .tx_buf		= txbuff, | 
|  | .rx_buf		= st->rx_buff, | 
|  | .len		= (st->nr_gpio * 2) / 8, | 
|  | }; | 
|  | struct spi_message msg; | 
|  |  | 
|  | txbuff[0] = CMD_READ; | 
|  | txbuff[1] = 0x00; | 
|  | txbuff[2] = 0x00; | 
|  | txbuff[3] = 0x00; | 
|  |  | 
|  | spi_message_init(&msg); | 
|  | spi_message_add_tail(&xfer, &msg); | 
|  |  | 
|  | return spi_sync(st->us, &msg); | 
|  | } | 
|  |  | 
|  | static unsigned char *decode_fault(unsigned int fault_code) | 
|  | { | 
|  | fault_code &= 3; | 
|  |  | 
|  | switch (fault_code) { | 
|  | case DIAG_NORMAL: | 
|  | return "N"; | 
|  | case DIAG_OVERLOAD: | 
|  | return "V"; | 
|  | case DIAG_OPEN: | 
|  | return "O"; | 
|  | case DIAG_SHORTGND: | 
|  | return "G"; | 
|  | } | 
|  |  | 
|  | return "?"; | 
|  | } | 
|  |  | 
|  | static ssize_t tle62x0_status_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct tle62x0_state *st = dev_get_drvdata(dev); | 
|  | char *bp = buf; | 
|  | unsigned char *buff = st->rx_buff; | 
|  | unsigned long fault = 0; | 
|  | int ptr; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&st->lock); | 
|  | ret = tle62x0_read(st); | 
|  | dev_dbg(dev, "tle62x0_read() returned %d\n", ret); | 
|  | if (ret < 0) { | 
|  | mutex_unlock(&st->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) { | 
|  | fault <<= 8; | 
|  | fault  |= ((unsigned long)buff[ptr]); | 
|  |  | 
|  | dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]); | 
|  | } | 
|  |  | 
|  | for (ptr = 0; ptr < st->nr_gpio; ptr++) { | 
|  | bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2))); | 
|  | } | 
|  |  | 
|  | *bp++ = '\n'; | 
|  |  | 
|  | mutex_unlock(&st->lock); | 
|  | return bp - buf; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL); | 
|  |  | 
|  | static ssize_t tle62x0_gpio_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct tle62x0_state *st = dev_get_drvdata(dev); | 
|  | int gpio_num = to_gpio_num(attr); | 
|  | int value; | 
|  |  | 
|  | mutex_lock(&st->lock); | 
|  | value = (st->gpio_state >> gpio_num) & 1; | 
|  | mutex_unlock(&st->lock); | 
|  |  | 
|  | return snprintf(buf, PAGE_SIZE, "%d", value); | 
|  | } | 
|  |  | 
|  | static ssize_t tle62x0_gpio_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct tle62x0_state *st = dev_get_drvdata(dev); | 
|  | int gpio_num = to_gpio_num(attr); | 
|  | unsigned long val; | 
|  | char *endp; | 
|  |  | 
|  | val = simple_strtoul(buf, &endp, 0); | 
|  | if (buf == endp) | 
|  | return -EINVAL; | 
|  |  | 
|  | dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val); | 
|  |  | 
|  | mutex_lock(&st->lock); | 
|  |  | 
|  | if (val) | 
|  | st->gpio_state |= 1 << gpio_num; | 
|  | else | 
|  | st->gpio_state &= ~(1 << gpio_num); | 
|  |  | 
|  | tle62x0_write(st); | 
|  | mutex_unlock(&st->lock); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  | static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO, | 
|  | tle62x0_gpio_show, tle62x0_gpio_store); | 
|  |  | 
|  | static struct device_attribute *gpio_attrs[] = { | 
|  | [0]		= &dev_attr_gpio1, | 
|  | [1]		= &dev_attr_gpio2, | 
|  | [2]		= &dev_attr_gpio3, | 
|  | [3]		= &dev_attr_gpio4, | 
|  | [4]		= &dev_attr_gpio5, | 
|  | [5]		= &dev_attr_gpio6, | 
|  | [6]		= &dev_attr_gpio7, | 
|  | [7]		= &dev_attr_gpio8, | 
|  | [8]		= &dev_attr_gpio9, | 
|  | [9]		= &dev_attr_gpio10, | 
|  | [10]		= &dev_attr_gpio11, | 
|  | [11]		= &dev_attr_gpio12, | 
|  | [12]		= &dev_attr_gpio13, | 
|  | [13]		= &dev_attr_gpio14, | 
|  | [14]		= &dev_attr_gpio15, | 
|  | [15]		= &dev_attr_gpio16 | 
|  | }; | 
|  |  | 
|  | static int to_gpio_num(struct device_attribute *attr) | 
|  | { | 
|  | int ptr; | 
|  |  | 
|  | for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) { | 
|  | if (gpio_attrs[ptr] == attr) | 
|  | return ptr; | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int tle62x0_probe(struct spi_device *spi) | 
|  | { | 
|  | struct tle62x0_state *st; | 
|  | struct tle62x0_pdata *pdata; | 
|  | int ptr; | 
|  | int ret; | 
|  |  | 
|  | pdata = dev_get_platdata(&spi->dev); | 
|  | if (pdata == NULL) { | 
|  | dev_err(&spi->dev, "no device data specified\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL); | 
|  | if (st == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | st->us = spi; | 
|  | st->nr_gpio = pdata->gpio_count; | 
|  | st->gpio_state = pdata->init_state; | 
|  |  | 
|  | mutex_init(&st->lock); | 
|  |  | 
|  | ret = device_create_file(&spi->dev, &dev_attr_status_show); | 
|  | if (ret) { | 
|  | dev_err(&spi->dev, "cannot create status attribute\n"); | 
|  | goto err_status; | 
|  | } | 
|  |  | 
|  | for (ptr = 0; ptr < pdata->gpio_count; ptr++) { | 
|  | ret = device_create_file(&spi->dev, gpio_attrs[ptr]); | 
|  | if (ret) { | 
|  | dev_err(&spi->dev, "cannot create gpio attribute\n"); | 
|  | goto err_gpios; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* tle62x0_write(st); */ | 
|  | spi_set_drvdata(spi, st); | 
|  | return 0; | 
|  |  | 
|  | err_gpios: | 
|  | while (--ptr >= 0) | 
|  | device_remove_file(&spi->dev, gpio_attrs[ptr]); | 
|  |  | 
|  | device_remove_file(&spi->dev, &dev_attr_status_show); | 
|  |  | 
|  | err_status: | 
|  | kfree(st); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tle62x0_remove(struct spi_device *spi) | 
|  | { | 
|  | struct tle62x0_state *st = spi_get_drvdata(spi); | 
|  | int ptr; | 
|  |  | 
|  | for (ptr = 0; ptr < st->nr_gpio; ptr++) | 
|  | device_remove_file(&spi->dev, gpio_attrs[ptr]); | 
|  |  | 
|  | device_remove_file(&spi->dev, &dev_attr_status_show); | 
|  | kfree(st); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct spi_driver tle62x0_driver = { | 
|  | .driver = { | 
|  | .name	= "tle62x0", | 
|  | }, | 
|  | .probe		= tle62x0_probe, | 
|  | .remove		= tle62x0_remove, | 
|  | }; | 
|  |  | 
|  | module_spi_driver(tle62x0_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | 
|  | MODULE_DESCRIPTION("TLE62x0 SPI driver"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("spi:tle62x0"); |