|  | /* | 
|  | * linux/drivers/video/stifb.c - | 
|  | * Low level Frame buffer driver for HP workstations with | 
|  | * STI (standard text interface) video firmware. | 
|  | * | 
|  | * Copyright (C) 2001-2004 Helge Deller <deller@gmx.de> | 
|  | * Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 
|  | * | 
|  | * Based on: | 
|  | * - linux/drivers/video/artistfb.c -- Artist frame buffer driver | 
|  | *	Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> | 
|  | *   - based on skeletonfb, which was | 
|  | *	Created 28 Dec 1997 by Geert Uytterhoeven | 
|  | * - HP Xhp cfb-based X11 window driver for XFree86 | 
|  | *	(c)Copyright 1992 Hewlett-Packard Co. | 
|  | * | 
|  | * | 
|  | *  The following graphics display devices (NGLE family) are supported by this driver: | 
|  | * | 
|  | *  HPA4070A	known as "HCRX", a 1280x1024 color device with 8 planes | 
|  | *  HPA4071A	known as "HCRX24", a 1280x1024 color device with 24 planes, | 
|  | *		optionally available with a hardware accelerator as HPA4071A_Z | 
|  | *  HPA1659A	known as "CRX", a 1280x1024 color device with 8 planes | 
|  | *  HPA1439A	known as "CRX24", a 1280x1024 color device with 24 planes, | 
|  | *		optionally available with a hardware accelerator. | 
|  | *  HPA1924A	known as "GRX", a 1280x1024 grayscale device with 8 planes | 
|  | *  HPA2269A	known as "Dual CRX", a 1280x1024 color device with 8 planes, | 
|  | *		implements support for two displays on a single graphics card. | 
|  | *  HP710C	internal graphics support optionally available on the HP9000s710 SPU, | 
|  | *		supports 1280x1024 color displays with 8 planes. | 
|  | *  HP710G	same as HP710C, 1280x1024 grayscale only | 
|  | *  HP710L	same as HP710C, 1024x768 color only | 
|  | *  HP712	internal graphics support on HP9000s712 SPU, supports 640x480, | 
|  | *		1024x768 or 1280x1024 color displays on 8 planes (Artist) | 
|  | * | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file COPYING in the main directory of this archive | 
|  | * for more details. | 
|  | */ | 
|  |  | 
|  | /* TODO: | 
|  | *	- 1bpp mode is completely untested | 
|  | *	- add support for h/w acceleration | 
|  | *	- add hardware cursor | 
|  | *	- automatically disable double buffering (e.g. on RDI precisionbook laptop) | 
|  | */ | 
|  |  | 
|  |  | 
|  | /* on supported graphic devices you may: | 
|  | * #define FALLBACK_TO_1BPP to fall back to 1 bpp, or | 
|  | * #undef  FALLBACK_TO_1BPP to reject support for unsupported cards */ | 
|  | #undef FALLBACK_TO_1BPP | 
|  |  | 
|  | #undef DEBUG_STIFB_REGS		/* debug sti register accesses */ | 
|  |  | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/fb.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/pci.h> | 
|  |  | 
|  | #include <asm/grfioctl.h>	/* for HP-UX compatibility */ | 
|  | #include <asm/uaccess.h> | 
|  |  | 
|  | #include "sticore.h" | 
|  |  | 
|  | /* REGION_BASE(fb_info, index) returns the virtual address for region <index> */ | 
|  | #ifdef __LP64__ | 
|  | #define REGION_BASE(fb_info, index) \ | 
|  | (fb_info->sti->glob_cfg->region_ptrs[index] | 0xffffffff00000000) | 
|  | #else | 
|  | #define REGION_BASE(fb_info, index) \ | 
|  | fb_info->sti->glob_cfg->region_ptrs[index] | 
|  | #endif | 
|  |  | 
|  | #define NGLEDEVDEPROM_CRT_REGION 1 | 
|  |  | 
|  | typedef struct { | 
|  | __s32	video_config_reg; | 
|  | __s32	misc_video_start; | 
|  | __s32	horiz_timing_fmt; | 
|  | __s32	serr_timing_fmt; | 
|  | __s32	vert_timing_fmt; | 
|  | __s32	horiz_state; | 
|  | __s32	vert_state; | 
|  | __s32	vtg_state_elements; | 
|  | __s32	pipeline_delay; | 
|  | __s32	misc_video_end; | 
|  | } video_setup_t; | 
|  |  | 
|  | typedef struct { | 
|  | __s16	sizeof_ngle_data; | 
|  | __s16	x_size_visible;	    /* visible screen dim in pixels  */ | 
|  | __s16	y_size_visible; | 
|  | __s16	pad2[15]; | 
|  | __s16	cursor_pipeline_delay; | 
|  | __s16	video_interleaves; | 
|  | __s32	pad3[11]; | 
|  | } ngle_rom_t; | 
|  |  | 
|  | struct stifb_info { | 
|  | struct fb_info info; | 
|  | unsigned int id; | 
|  | ngle_rom_t ngle_rom; | 
|  | struct sti_struct *sti; | 
|  | int deviceSpecificConfig; | 
|  | u32 pseudo_palette[256]; | 
|  | }; | 
|  |  | 
|  | static int __initdata stifb_bpp_pref[MAX_STI_ROMS]; | 
|  |  | 
|  | /* ------------------- chipset specific functions -------------------------- */ | 
|  |  | 
|  | /* offsets to graphic-chip internal registers */ | 
|  |  | 
|  | #define REG_1		0x000118 | 
|  | #define REG_2		0x000480 | 
|  | #define REG_3		0x0004a0 | 
|  | #define REG_4		0x000600 | 
|  | #define REG_6		0x000800 | 
|  | #define REG_8		0x000820 | 
|  | #define REG_9		0x000a04 | 
|  | #define REG_10		0x018000 | 
|  | #define REG_11		0x018004 | 
|  | #define REG_12		0x01800c | 
|  | #define REG_13		0x018018 | 
|  | #define REG_14  	0x01801c | 
|  | #define REG_15		0x200000 | 
|  | #define REG_15b0	0x200000 | 
|  | #define REG_16b1	0x200005 | 
|  | #define REG_16b3	0x200007 | 
|  | #define REG_21		0x200218 | 
|  | #define REG_22		0x0005a0 | 
|  | #define REG_23		0x0005c0 | 
|  | #define REG_26		0x200118 | 
|  | #define REG_27		0x200308 | 
|  | #define REG_32		0x21003c | 
|  | #define REG_33		0x210040 | 
|  | #define REG_34		0x200008 | 
|  | #define REG_35		0x018010 | 
|  | #define REG_38		0x210020 | 
|  | #define REG_39		0x210120 | 
|  | #define REG_40		0x210130 | 
|  | #define REG_42		0x210028 | 
|  | #define REG_43		0x21002c | 
|  | #define REG_44		0x210030 | 
|  | #define REG_45		0x210034 | 
|  |  | 
|  | #define READ_BYTE(fb,reg)		gsc_readb((fb)->info.fix.mmio_start + (reg)) | 
|  | #define READ_WORD(fb,reg)		gsc_readl((fb)->info.fix.mmio_start + (reg)) | 
|  |  | 
|  |  | 
|  | #ifndef DEBUG_STIFB_REGS | 
|  | # define  DEBUG_OFF() | 
|  | # define  DEBUG_ON() | 
|  | # define WRITE_BYTE(value,fb,reg)	gsc_writeb((value),(fb)->info.fix.mmio_start + (reg)) | 
|  | # define WRITE_WORD(value,fb,reg)	gsc_writel((value),(fb)->info.fix.mmio_start + (reg)) | 
|  | #else | 
|  | static int debug_on = 1; | 
|  | # define  DEBUG_OFF() debug_on=0 | 
|  | # define  DEBUG_ON()  debug_on=1 | 
|  | # define WRITE_BYTE(value,fb,reg)	do { if (debug_on) \ | 
|  | printk(KERN_DEBUG "%30s: WRITE_BYTE(0x%06x) = 0x%02x (old=0x%02x)\n", \ | 
|  | __FUNCTION__, reg, value, READ_BYTE(fb,reg)); 		  \ | 
|  | gsc_writeb((value),(fb)->info.fix.mmio_start + (reg)); } while (0) | 
|  | # define WRITE_WORD(value,fb,reg)	do { if (debug_on) \ | 
|  | printk(KERN_DEBUG "%30s: WRITE_WORD(0x%06x) = 0x%08x (old=0x%08x)\n", \ | 
|  | __FUNCTION__, reg, value, READ_WORD(fb,reg)); 		  \ | 
|  | gsc_writel((value),(fb)->info.fix.mmio_start + (reg)); } while (0) | 
|  | #endif /* DEBUG_STIFB_REGS */ | 
|  |  | 
|  |  | 
|  | #define ENABLE	1	/* for enabling/disabling screen */ | 
|  | #define DISABLE 0 | 
|  |  | 
|  | #define NGLE_LOCK(fb_info)	do { } while (0) | 
|  | #define NGLE_UNLOCK(fb_info)	do { } while (0) | 
|  |  | 
|  | static void | 
|  | SETUP_HW(struct stifb_info *fb) | 
|  | { | 
|  | char stat; | 
|  |  | 
|  | do { | 
|  | stat = READ_BYTE(fb, REG_15b0); | 
|  | if (!stat) | 
|  | stat = READ_BYTE(fb, REG_15b0); | 
|  | } while (stat); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | SETUP_FB(struct stifb_info *fb) | 
|  | { | 
|  | unsigned int reg10_value = 0; | 
|  |  | 
|  | SETUP_HW(fb); | 
|  | switch (fb->id) | 
|  | { | 
|  | case CRT_ID_VISUALIZE_EG: | 
|  | case S9000_ID_ARTIST: | 
|  | case S9000_ID_A1659A: | 
|  | reg10_value = 0x13601000; | 
|  | break; | 
|  | case S9000_ID_A1439A: | 
|  | if (fb->info.var.bits_per_pixel == 32) | 
|  | reg10_value = 0xBBA0A000; | 
|  | else | 
|  | reg10_value = 0x13601000; | 
|  | break; | 
|  | case S9000_ID_HCRX: | 
|  | if (fb->info.var.bits_per_pixel == 32) | 
|  | reg10_value = 0xBBA0A000; | 
|  | else | 
|  | reg10_value = 0x13602000; | 
|  | break; | 
|  | case S9000_ID_TIMBER: | 
|  | case CRX24_OVERLAY_PLANES: | 
|  | reg10_value = 0x13602000; | 
|  | break; | 
|  | } | 
|  | if (reg10_value) | 
|  | WRITE_WORD(reg10_value, fb, REG_10); | 
|  | WRITE_WORD(0x83000300, fb, REG_14); | 
|  | SETUP_HW(fb); | 
|  | WRITE_BYTE(1, fb, REG_16b1); | 
|  | } | 
|  |  | 
|  | static void | 
|  | START_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0xBBE0F000, fb, REG_10); | 
|  | WRITE_WORD(0x03000300, fb, REG_14); | 
|  | WRITE_WORD(~0, fb, REG_13); | 
|  | } | 
|  |  | 
|  | static void | 
|  | WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(((0x100+index)<<2), fb, REG_3); | 
|  | WRITE_WORD(color, fb, REG_4); | 
|  | } | 
|  |  | 
|  | static void | 
|  | FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb) | 
|  | { | 
|  | WRITE_WORD(0x400, fb, REG_2); | 
|  | if (fb->info.var.bits_per_pixel == 32) { | 
|  | WRITE_WORD(0x83000100, fb, REG_1); | 
|  | } else { | 
|  | if (fb->id == S9000_ID_ARTIST || fb->id == CRT_ID_VISUALIZE_EG) | 
|  | WRITE_WORD(0x80000100, fb, REG_26); | 
|  | else | 
|  | WRITE_WORD(0x80000100, fb, REG_1); | 
|  | } | 
|  | SETUP_FB(fb); | 
|  | } | 
|  |  | 
|  | static void | 
|  | SETUP_RAMDAC(struct stifb_info *fb) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x04000000, fb, 0x1020); | 
|  | WRITE_WORD(0xff000000, fb, 0x1028); | 
|  | } | 
|  |  | 
|  | static void | 
|  | CRX24_SETUP_RAMDAC(struct stifb_info *fb) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x04000000, fb, 0x1000); | 
|  | WRITE_WORD(0x02000000, fb, 0x1004); | 
|  | WRITE_WORD(0xff000000, fb, 0x1008); | 
|  | WRITE_WORD(0x05000000, fb, 0x1000); | 
|  | WRITE_WORD(0x02000000, fb, 0x1004); | 
|  | WRITE_WORD(0x03000000, fb, 0x1008); | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | static void | 
|  | HCRX_SETUP_RAMDAC(struct stifb_info *fb) | 
|  | { | 
|  | WRITE_WORD(0xffffffff, fb, REG_32); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void | 
|  | CRX24_SET_OVLY_MASK(struct stifb_info *fb) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x13a02000, fb, REG_11); | 
|  | WRITE_WORD(0x03000300, fb, REG_14); | 
|  | WRITE_WORD(0x000017f0, fb, REG_3); | 
|  | WRITE_WORD(0xffffffff, fb, REG_13); | 
|  | WRITE_WORD(0xffffffff, fb, REG_22); | 
|  | WRITE_WORD(0x00000000, fb, REG_23); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) | 
|  | { | 
|  | unsigned int value = enable ? 0x43000000 : 0x03000000; | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x06000000,	fb, 0x1030); | 
|  | WRITE_WORD(value, 	fb, 0x1038); | 
|  | } | 
|  |  | 
|  | static void | 
|  | CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) | 
|  | { | 
|  | unsigned int value = enable ? 0x10000000 : 0x30000000; | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x01000000,	fb, 0x1000); | 
|  | WRITE_WORD(0x02000000,	fb, 0x1004); | 
|  | WRITE_WORD(value,	fb, 0x1008); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) | 
|  | { | 
|  | u32 DregsMiscVideo = REG_21; | 
|  | u32 DregsMiscCtl = REG_27; | 
|  |  | 
|  | SETUP_HW(fb); | 
|  | if (enable) { | 
|  | WRITE_WORD(READ_WORD(fb, DregsMiscVideo) | 0x0A000000, fb, DregsMiscVideo); | 
|  | WRITE_WORD(READ_WORD(fb, DregsMiscCtl)   | 0x00800000, fb, DregsMiscCtl); | 
|  | } else { | 
|  | WRITE_WORD(READ_WORD(fb, DregsMiscVideo) & ~0x0A000000, fb, DregsMiscVideo); | 
|  | WRITE_WORD(READ_WORD(fb, DregsMiscCtl)   & ~0x00800000, fb, DregsMiscCtl); | 
|  | } | 
|  | } | 
|  |  | 
|  | #define GET_ROMTABLE_INDEX(fb) \ | 
|  | (READ_BYTE(fb, REG_16b3) - 1) | 
|  |  | 
|  | #define HYPER_CONFIG_PLANES_24 0x00000100 | 
|  |  | 
|  | #define IS_24_DEVICE(fb) \ | 
|  | (fb->deviceSpecificConfig & HYPER_CONFIG_PLANES_24) | 
|  |  | 
|  | #define IS_888_DEVICE(fb) \ | 
|  | (!(IS_24_DEVICE(fb))) | 
|  |  | 
|  | #define GET_FIFO_SLOTS(fb, cnt, numslots)			\ | 
|  | {	while (cnt < numslots) 					\ | 
|  | cnt = READ_WORD(fb, REG_34);	\ | 
|  | cnt -= numslots;					\ | 
|  | } | 
|  |  | 
|  | #define	    IndexedDcd	0	/* Pixel data is indexed (pseudo) color */ | 
|  | #define	    Otc04	2	/* Pixels in each longword transfer (4) */ | 
|  | #define	    Otc32	5	/* Pixels in each longword transfer (32) */ | 
|  | #define	    Ots08	3	/* Each pixel is size (8)d transfer (1) */ | 
|  | #define	    OtsIndirect	6	/* Each bit goes through FG/BG color(8) */ | 
|  | #define	    AddrLong	5	/* FB address is Long aligned (pixel) */ | 
|  | #define	    BINovly	0x2	/* 8 bit overlay */ | 
|  | #define	    BINapp0I	0x0	/* Application Buffer 0, Indexed */ | 
|  | #define	    BINapp1I	0x1	/* Application Buffer 1, Indexed */ | 
|  | #define	    BINapp0F8	0xa	/* Application Buffer 0, Fractional 8-8-8 */ | 
|  | #define	    BINattr	0xd	/* Attribute Bitmap */ | 
|  | #define	    RopSrc 	0x3 | 
|  | #define	    BitmapExtent08  3	/* Each write hits ( 8) bits in depth */ | 
|  | #define	    BitmapExtent32  5	/* Each write hits (32) bits in depth */ | 
|  | #define	    DataDynamic	    0	/* Data register reloaded by direct access */ | 
|  | #define	    MaskDynamic	    1	/* Mask register reloaded by direct access */ | 
|  | #define	    MaskOtc	    0	/* Mask contains Object Count valid bits */ | 
|  |  | 
|  | #define MaskAddrOffset(offset) (offset) | 
|  | #define StaticReg(en) (en) | 
|  | #define BGx(en) (en) | 
|  | #define FGx(en) (en) | 
|  |  | 
|  | #define BAJustPoint(offset) (offset) | 
|  | #define BAIndexBase(base) (base) | 
|  | #define BA(F,C,S,A,J,B,I) \ | 
|  | (((F)<<31)|((C)<<27)|((S)<<24)|((A)<<21)|((J)<<16)|((B)<<12)|(I)) | 
|  |  | 
|  | #define IBOvals(R,M,X,S,D,L,B,F) \ | 
|  | (((R)<<8)|((M)<<16)|((X)<<24)|((S)<<29)|((D)<<28)|((L)<<31)|((B)<<1)|(F)) | 
|  |  | 
|  | #define NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, val) \ | 
|  | WRITE_WORD(val, fb, REG_14) | 
|  |  | 
|  | #define NGLE_QUICK_SET_DST_BM_ACCESS(fb, val) \ | 
|  | WRITE_WORD(val, fb, REG_11) | 
|  |  | 
|  | #define NGLE_QUICK_SET_CTL_PLN_REG(fb, val) \ | 
|  | WRITE_WORD(val, fb, REG_12) | 
|  |  | 
|  | #define NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, plnmsk32) \ | 
|  | WRITE_WORD(plnmsk32, fb, REG_13) | 
|  |  | 
|  | #define NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, fg32) \ | 
|  | WRITE_WORD(fg32, fb, REG_35) | 
|  |  | 
|  | #define NGLE_SET_TRANSFERDATA(fb, val) \ | 
|  | WRITE_WORD(val, fb, REG_8) | 
|  |  | 
|  | #define NGLE_SET_DSTXY(fb, val) \ | 
|  | WRITE_WORD(val, fb, REG_6) | 
|  |  | 
|  | #define NGLE_LONG_FB_ADDRESS(fbaddrbase, x, y) (		\ | 
|  | (u32) (fbaddrbase) +					\ | 
|  | (	(unsigned int)  ( (y) << 13      ) |		\ | 
|  | (unsigned int)  ( (x) << 2       )	)	\ | 
|  | ) | 
|  |  | 
|  | #define NGLE_BINC_SET_DSTADDR(fb, addr) \ | 
|  | WRITE_WORD(addr, fb, REG_3) | 
|  |  | 
|  | #define NGLE_BINC_SET_SRCADDR(fb, addr) \ | 
|  | WRITE_WORD(addr, fb, REG_2) | 
|  |  | 
|  | #define NGLE_BINC_SET_DSTMASK(fb, mask) \ | 
|  | WRITE_WORD(mask, fb, REG_22) | 
|  |  | 
|  | #define NGLE_BINC_WRITE32(fb, data32) \ | 
|  | WRITE_WORD(data32, fb, REG_23) | 
|  |  | 
|  | #define START_COLORMAPLOAD(fb, cmapBltCtlData32) \ | 
|  | WRITE_WORD((cmapBltCtlData32), fb, REG_38) | 
|  |  | 
|  | #define SET_LENXY_START_RECFILL(fb, lenxy) \ | 
|  | WRITE_WORD(lenxy, fb, REG_9) | 
|  |  | 
|  | static void | 
|  | HYPER_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable) | 
|  | { | 
|  | u32 DregsHypMiscVideo = REG_33; | 
|  | unsigned int value; | 
|  | SETUP_HW(fb); | 
|  | value = READ_WORD(fb, DregsHypMiscVideo); | 
|  | if (enable) | 
|  | value |= 0x0A000000; | 
|  | else | 
|  | value &= ~0x0A000000; | 
|  | WRITE_WORD(value, fb, DregsHypMiscVideo); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* BufferNumbers used by SETUP_ATTR_ACCESS() */ | 
|  | #define BUFF0_CMAP0	0x00001e02 | 
|  | #define BUFF1_CMAP0	0x02001e02 | 
|  | #define BUFF1_CMAP3	0x0c001e02 | 
|  | #define ARTIST_CMAP0	0x00000102 | 
|  | #define HYPER_CMAP8	0x00000100 | 
|  | #define HYPER_CMAP24	0x00000800 | 
|  |  | 
|  | static void | 
|  | SETUP_ATTR_ACCESS(struct stifb_info *fb, unsigned BufferNumber) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x2EA0D000, fb, REG_11); | 
|  | WRITE_WORD(0x23000302, fb, REG_14); | 
|  | WRITE_WORD(BufferNumber, fb, REG_12); | 
|  | WRITE_WORD(0xffffffff, fb, REG_8); | 
|  | } | 
|  |  | 
|  | static void | 
|  | SET_ATTR_SIZE(struct stifb_info *fb, int width, int height) | 
|  | { | 
|  | /* REG_6 seems to have special values when run on a | 
|  | RDI precisionbook parisc laptop (INTERNAL_EG_DX1024 or | 
|  | INTERNAL_EG_X1024).  The values are: | 
|  | 0x2f0: internal (LCD) & external display enabled | 
|  | 0x2a0: external display only | 
|  | 0x000: zero on standard artist graphic cards | 
|  | */ | 
|  | WRITE_WORD(0x00000000, fb, REG_6); | 
|  | WRITE_WORD((width<<16) | height, fb, REG_9); | 
|  | WRITE_WORD(0x05000000, fb, REG_6); | 
|  | WRITE_WORD(0x00040001, fb, REG_9); | 
|  | } | 
|  |  | 
|  | static void | 
|  | FINISH_ATTR_ACCESS(struct stifb_info *fb) | 
|  | { | 
|  | SETUP_HW(fb); | 
|  | WRITE_WORD(0x00000000, fb, REG_12); | 
|  | } | 
|  |  | 
|  | static void | 
|  | elkSetupPlanes(struct stifb_info *fb) | 
|  | { | 
|  | SETUP_RAMDAC(fb); | 
|  | SETUP_FB(fb); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber) | 
|  | { | 
|  | SETUP_ATTR_ACCESS(fb, BufferNumber); | 
|  | SET_ATTR_SIZE(fb, fb->info.var.xres, fb->info.var.yres); | 
|  | FINISH_ATTR_ACCESS(fb); | 
|  | SETUP_FB(fb); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | rattlerSetupPlanes(struct stifb_info *fb) | 
|  | { | 
|  | CRX24_SETUP_RAMDAC(fb); | 
|  |  | 
|  | /* replacement for: SETUP_FB(fb, CRX24_OVERLAY_PLANES); */ | 
|  | WRITE_WORD(0x83000300, fb, REG_14); | 
|  | SETUP_HW(fb); | 
|  | WRITE_BYTE(1, fb, REG_16b1); | 
|  |  | 
|  | fb_memset(fb->info.fix.smem_start, 0xff, | 
|  | fb->info.var.yres*fb->info.fix.line_length); | 
|  |  | 
|  | CRX24_SET_OVLY_MASK(fb); | 
|  | SETUP_FB(fb); | 
|  | } | 
|  |  | 
|  |  | 
|  | #define HYPER_CMAP_TYPE				0 | 
|  | #define NGLE_CMAP_INDEXED0_TYPE			0 | 
|  | #define NGLE_CMAP_OVERLAY_TYPE			3 | 
|  |  | 
|  | /* typedef of LUT (Colormap) BLT Control Register */ | 
|  | typedef union	/* Note assumption that fields are packed left-to-right */ | 
|  | {	u32 all; | 
|  | struct | 
|  | { | 
|  | unsigned enable              :  1; | 
|  | unsigned waitBlank           :  1; | 
|  | unsigned reserved1           :  4; | 
|  | unsigned lutOffset           : 10;   /* Within destination LUT */ | 
|  | unsigned lutType             :  2;   /* Cursor, image, overlay */ | 
|  | unsigned reserved2           :  4; | 
|  | unsigned length              : 10; | 
|  | } fields; | 
|  | } NgleLutBltCtl; | 
|  |  | 
|  |  | 
|  | #if 0 | 
|  | static NgleLutBltCtl | 
|  | setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) | 
|  | { | 
|  | NgleLutBltCtl lutBltCtl; | 
|  |  | 
|  | /* set enable, zero reserved fields */ | 
|  | lutBltCtl.all           = 0x80000000; | 
|  | lutBltCtl.fields.length = length; | 
|  |  | 
|  | switch (fb->id) | 
|  | { | 
|  | case S9000_ID_A1439A:		/* CRX24 */ | 
|  | if (fb->var.bits_per_pixel == 8) { | 
|  | lutBltCtl.fields.lutType = NGLE_CMAP_OVERLAY_TYPE; | 
|  | lutBltCtl.fields.lutOffset = 0; | 
|  | } else { | 
|  | lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE; | 
|  | lutBltCtl.fields.lutOffset = 0 * 256; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case S9000_ID_ARTIST: | 
|  | lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE; | 
|  | lutBltCtl.fields.lutOffset = 0 * 256; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE; | 
|  | lutBltCtl.fields.lutOffset = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Offset points to start of LUT.  Adjust for within LUT */ | 
|  | lutBltCtl.fields.lutOffset += offsetWithinLut; | 
|  |  | 
|  | return lutBltCtl; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static NgleLutBltCtl | 
|  | setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length) | 
|  | { | 
|  | NgleLutBltCtl lutBltCtl; | 
|  |  | 
|  | /* set enable, zero reserved fields */ | 
|  | lutBltCtl.all = 0x80000000; | 
|  |  | 
|  | lutBltCtl.fields.length = length; | 
|  | lutBltCtl.fields.lutType = HYPER_CMAP_TYPE; | 
|  |  | 
|  | /* Expect lutIndex to be 0 or 1 for image cmaps, 2 or 3 for overlay cmaps */ | 
|  | if (fb->info.var.bits_per_pixel == 8) | 
|  | lutBltCtl.fields.lutOffset = 2 * 256; | 
|  | else | 
|  | lutBltCtl.fields.lutOffset = 0 * 256; | 
|  |  | 
|  | /* Offset points to start of LUT.  Adjust for within LUT */ | 
|  | lutBltCtl.fields.lutOffset += offsetWithinLut; | 
|  |  | 
|  | return lutBltCtl; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void hyperUndoITE(struct stifb_info *fb) | 
|  | { | 
|  | int nFreeFifoSlots = 0; | 
|  | u32 fbAddr; | 
|  |  | 
|  | NGLE_LOCK(fb); | 
|  |  | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1); | 
|  | WRITE_WORD(0xffffffff, fb, REG_32); | 
|  |  | 
|  | /* Write overlay transparency mask so only entry 255 is transparent */ | 
|  |  | 
|  | /* Hardware setup for full-depth write to "magic" location */ | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7); | 
|  | NGLE_QUICK_SET_DST_BM_ACCESS(fb, | 
|  | BA(IndexedDcd, Otc04, Ots08, AddrLong, | 
|  | BAJustPoint(0), BINovly, BAIndexBase(0))); | 
|  | NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, | 
|  | IBOvals(RopSrc, MaskAddrOffset(0), | 
|  | BitmapExtent08, StaticReg(0), | 
|  | DataDynamic, MaskOtc, BGx(0), FGx(0))); | 
|  |  | 
|  | /* Now prepare to write to the "magic" location */ | 
|  | fbAddr = NGLE_LONG_FB_ADDRESS(0, 1532, 0); | 
|  | NGLE_BINC_SET_DSTADDR(fb, fbAddr); | 
|  | NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffff); | 
|  | NGLE_BINC_SET_DSTMASK(fb, 0xffffffff); | 
|  |  | 
|  | /* Finally, write a zero to clear the mask */ | 
|  | NGLE_BINC_WRITE32(fb, 0); | 
|  |  | 
|  | NGLE_UNLOCK(fb); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ngleDepth8_ClearImagePlanes(struct stifb_info *fb) | 
|  | { | 
|  | /* FIXME! */ | 
|  | } | 
|  |  | 
|  | static void | 
|  | ngleDepth24_ClearImagePlanes(struct stifb_info *fb) | 
|  | { | 
|  | /* FIXME! */ | 
|  | } | 
|  |  | 
|  | static void | 
|  | ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg) | 
|  | { | 
|  | int nFreeFifoSlots = 0; | 
|  | u32 packed_dst; | 
|  | u32 packed_len; | 
|  |  | 
|  | NGLE_LOCK(fb); | 
|  |  | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 4); | 
|  | NGLE_QUICK_SET_DST_BM_ACCESS(fb, | 
|  | BA(IndexedDcd, Otc32, OtsIndirect, | 
|  | AddrLong, BAJustPoint(0), | 
|  | BINattr, BAIndexBase(0))); | 
|  | NGLE_QUICK_SET_CTL_PLN_REG(fb, ctlPlaneReg); | 
|  | NGLE_SET_TRANSFERDATA(fb, 0xffffffff); | 
|  |  | 
|  | NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, | 
|  | IBOvals(RopSrc, MaskAddrOffset(0), | 
|  | BitmapExtent08, StaticReg(1), | 
|  | DataDynamic, MaskOtc, | 
|  | BGx(0), FGx(0))); | 
|  | packed_dst = 0; | 
|  | packed_len = (fb->info.var.xres << 16) | fb->info.var.yres; | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2); | 
|  | NGLE_SET_DSTXY(fb, packed_dst); | 
|  | SET_LENXY_START_RECFILL(fb, packed_len); | 
|  |  | 
|  | /* | 
|  | * In order to work around an ELK hardware problem (Buffy doesn't | 
|  | * always flush it's buffers when writing to the attribute | 
|  | * planes), at least 4 pixels must be written to the attribute | 
|  | * planes starting at (X == 1280) and (Y != to the last Y written | 
|  | * by BIF): | 
|  | */ | 
|  |  | 
|  | if (fb->id == S9000_ID_A1659A) {   /* ELK_DEVICE_ID */ | 
|  | /* It's safe to use scanline zero: */ | 
|  | packed_dst = (1280 << 16); | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2); | 
|  | NGLE_SET_DSTXY(fb, packed_dst); | 
|  | packed_len = (4 << 16) | 1; | 
|  | SET_LENXY_START_RECFILL(fb, packed_len); | 
|  | }   /* ELK Hardware Kludge */ | 
|  |  | 
|  | /**** Finally, set the Control Plane Register back to zero: ****/ | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1); | 
|  | NGLE_QUICK_SET_CTL_PLN_REG(fb, 0); | 
|  |  | 
|  | NGLE_UNLOCK(fb); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data) | 
|  | { | 
|  | int nFreeFifoSlots = 0; | 
|  | u32 packed_dst; | 
|  | u32 packed_len; | 
|  |  | 
|  | NGLE_LOCK(fb); | 
|  |  | 
|  | /* Hardware setup */ | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 8); | 
|  | NGLE_QUICK_SET_DST_BM_ACCESS(fb, | 
|  | BA(IndexedDcd, Otc04, Ots08, AddrLong, | 
|  | BAJustPoint(0), BINovly, BAIndexBase(0))); | 
|  |  | 
|  | NGLE_SET_TRANSFERDATA(fb, 0xffffffff);  /* Write foreground color */ | 
|  |  | 
|  | NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, data); | 
|  | NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, mask); | 
|  |  | 
|  | packed_dst = 0; | 
|  | packed_len = (fb->info.var.xres << 16) | fb->info.var.yres; | 
|  | NGLE_SET_DSTXY(fb, packed_dst); | 
|  |  | 
|  | /* Write zeroes to overlay planes */ | 
|  | NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, | 
|  | IBOvals(RopSrc, MaskAddrOffset(0), | 
|  | BitmapExtent08, StaticReg(0), | 
|  | DataDynamic, MaskOtc, BGx(0), FGx(0))); | 
|  |  | 
|  | SET_LENXY_START_RECFILL(fb, packed_len); | 
|  |  | 
|  | NGLE_UNLOCK(fb); | 
|  | } | 
|  |  | 
|  | static void | 
|  | hyperResetPlanes(struct stifb_info *fb, int enable) | 
|  | { | 
|  | unsigned int controlPlaneReg; | 
|  |  | 
|  | NGLE_LOCK(fb); | 
|  |  | 
|  | if (IS_24_DEVICE(fb)) | 
|  | if (fb->info.var.bits_per_pixel == 32) | 
|  | controlPlaneReg = 0x04000F00; | 
|  | else | 
|  | controlPlaneReg = 0x00000F00;   /* 0x00000800 should be enought, but lets clear all 4 bits */ | 
|  | else | 
|  | controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */ | 
|  |  | 
|  | switch (enable) { | 
|  | case ENABLE: | 
|  | /* clear screen */ | 
|  | if (IS_24_DEVICE(fb)) | 
|  | ngleDepth24_ClearImagePlanes(fb); | 
|  | else | 
|  | ngleDepth8_ClearImagePlanes(fb); | 
|  |  | 
|  | /* Paint attribute planes for default case. | 
|  | * On Hyperdrive, this means all windows using overlay cmap 0. */ | 
|  | ngleResetAttrPlanes(fb, controlPlaneReg); | 
|  |  | 
|  | /* clear overlay planes */ | 
|  | ngleClearOverlayPlanes(fb, 0xff, 255); | 
|  |  | 
|  | /************************************************** | 
|  | ** Also need to counteract ITE settings | 
|  | **************************************************/ | 
|  | hyperUndoITE(fb); | 
|  | break; | 
|  |  | 
|  | case DISABLE: | 
|  | /* clear screen */ | 
|  | if (IS_24_DEVICE(fb)) | 
|  | ngleDepth24_ClearImagePlanes(fb); | 
|  | else | 
|  | ngleDepth8_ClearImagePlanes(fb); | 
|  | ngleResetAttrPlanes(fb, controlPlaneReg); | 
|  | ngleClearOverlayPlanes(fb, 0xff, 0); | 
|  | break; | 
|  |  | 
|  | case -1:	/* RESET */ | 
|  | hyperUndoITE(fb); | 
|  | ngleResetAttrPlanes(fb, controlPlaneReg); | 
|  | break; | 
|  | } | 
|  |  | 
|  | NGLE_UNLOCK(fb); | 
|  | } | 
|  |  | 
|  | /* Return pointer to in-memory structure holding ELK device-dependent ROM values. */ | 
|  |  | 
|  | static void | 
|  | ngleGetDeviceRomData(struct stifb_info *fb) | 
|  | { | 
|  | #if 0 | 
|  | XXX: FIXME: !!! | 
|  | int	*pBytePerLongDevDepData;/* data byte == LSB */ | 
|  | int 	*pRomTable; | 
|  | NgleDevRomData	*pPackedDevRomData; | 
|  | int	sizePackedDevRomData = sizeof(*pPackedDevRomData); | 
|  | char	*pCard8; | 
|  | int	i; | 
|  | char	*mapOrigin = NULL; | 
|  |  | 
|  | int romTableIdx; | 
|  |  | 
|  | pPackedDevRomData = fb->ngle_rom; | 
|  |  | 
|  | SETUP_HW(fb); | 
|  | if (fb->id == S9000_ID_ARTIST) { | 
|  | pPackedDevRomData->cursor_pipeline_delay = 4; | 
|  | pPackedDevRomData->video_interleaves     = 4; | 
|  | } else { | 
|  | /* Get pointer to unpacked byte/long data in ROM */ | 
|  | pBytePerLongDevDepData = fb->sti->regions[NGLEDEVDEPROM_CRT_REGION]; | 
|  |  | 
|  | /* Tomcat supports several resolutions: 1280x1024, 1024x768, 640x480 */ | 
|  | if (fb->id == S9000_ID_TOMCAT) | 
|  | { | 
|  | /*  jump to the correct ROM table  */ | 
|  | GET_ROMTABLE_INDEX(romTableIdx); | 
|  | while  (romTableIdx > 0) | 
|  | { | 
|  | pCard8 = (Card8 *) pPackedDevRomData; | 
|  | pRomTable = pBytePerLongDevDepData; | 
|  | /* Pack every fourth byte from ROM into structure */ | 
|  | for (i = 0; i < sizePackedDevRomData; i++) | 
|  | { | 
|  | *pCard8++ = (Card8) (*pRomTable++); | 
|  | } | 
|  |  | 
|  | pBytePerLongDevDepData = (Card32 *) | 
|  | ((Card8 *) pBytePerLongDevDepData + | 
|  | pPackedDevRomData->sizeof_ngle_data); | 
|  |  | 
|  | romTableIdx--; | 
|  | } | 
|  | } | 
|  |  | 
|  | pCard8 = (Card8 *) pPackedDevRomData; | 
|  |  | 
|  | /* Pack every fourth byte from ROM into structure */ | 
|  | for (i = 0; i < sizePackedDevRomData; i++) | 
|  | { | 
|  | *pCard8++ = (Card8) (*pBytePerLongDevDepData++); | 
|  | } | 
|  | } | 
|  |  | 
|  | SETUP_FB(fb); | 
|  | #endif | 
|  | } | 
|  |  | 
|  |  | 
|  | #define HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES	4 | 
|  | #define HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE	8 | 
|  | #define HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE		10 | 
|  | #define HYPERBOWL_MODE2_8_24					15 | 
|  |  | 
|  | /* HCRX specific boot-time initialization */ | 
|  | static void __init | 
|  | SETUP_HCRX(struct stifb_info *fb) | 
|  | { | 
|  | int	hyperbowl; | 
|  | int	nFreeFifoSlots = 0; | 
|  |  | 
|  | if (fb->id != S9000_ID_HCRX) | 
|  | return; | 
|  |  | 
|  | /* Initialize Hyperbowl registers */ | 
|  | GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7); | 
|  |  | 
|  | if (IS_24_DEVICE(fb)) { | 
|  | hyperbowl = (fb->info.var.bits_per_pixel == 32) ? | 
|  | HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE : | 
|  | HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE; | 
|  |  | 
|  | /* First write to Hyperbowl must happen twice (bug) */ | 
|  | WRITE_WORD(hyperbowl, fb, REG_40); | 
|  | WRITE_WORD(hyperbowl, fb, REG_40); | 
|  |  | 
|  | WRITE_WORD(HYPERBOWL_MODE2_8_24, fb, REG_39); | 
|  |  | 
|  | WRITE_WORD(0x014c0148, fb, REG_42); /* Set lut 0 to be the direct color */ | 
|  | WRITE_WORD(0x404c4048, fb, REG_43); | 
|  | WRITE_WORD(0x034c0348, fb, REG_44); | 
|  | WRITE_WORD(0x444c4448, fb, REG_45); | 
|  | } else { | 
|  | hyperbowl = HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES; | 
|  |  | 
|  | /* First write to Hyperbowl must happen twice (bug) */ | 
|  | WRITE_WORD(hyperbowl, fb, REG_40); | 
|  | WRITE_WORD(hyperbowl, fb, REG_40); | 
|  |  | 
|  | WRITE_WORD(0x00000000, fb, REG_42); | 
|  | WRITE_WORD(0x00000000, fb, REG_43); | 
|  | WRITE_WORD(0x00000000, fb, REG_44); | 
|  | WRITE_WORD(0x444c4048, fb, REG_45); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* ------------------- driver specific functions --------------------------- */ | 
|  |  | 
|  | #define TMPBUFLEN 2048 | 
|  |  | 
|  | static ssize_t | 
|  | stifb_read(struct file *file, char *buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | unsigned long p = *ppos; | 
|  | struct inode *inode = file->f_dentry->d_inode; | 
|  | int fbidx = iminor(inode); | 
|  | struct fb_info *info = registered_fb[fbidx]; | 
|  | char tmpbuf[TMPBUFLEN]; | 
|  |  | 
|  | if (!info || ! info->screen_base) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (p >= info->fix.smem_len) | 
|  | return 0; | 
|  | if (count >= info->fix.smem_len) | 
|  | count = info->fix.smem_len; | 
|  | if (count + p > info->fix.smem_len) | 
|  | count = info->fix.smem_len - p; | 
|  | if (count > sizeof(tmpbuf)) | 
|  | count = sizeof(tmpbuf); | 
|  | if (count) { | 
|  | char *base_addr; | 
|  |  | 
|  | base_addr = info->screen_base; | 
|  | memcpy_fromio(&tmpbuf, base_addr+p, count); | 
|  | count -= copy_to_user(buf, &tmpbuf, count); | 
|  | if (!count) | 
|  | return -EFAULT; | 
|  | *ppos += count; | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | stifb_write(struct file *file, const char *buf, size_t count, loff_t *ppos) | 
|  | { | 
|  | struct inode *inode = file->f_dentry->d_inode; | 
|  | int fbidx = iminor(inode); | 
|  | struct fb_info *info = registered_fb[fbidx]; | 
|  | unsigned long p = *ppos; | 
|  | size_t c; | 
|  | int err; | 
|  | char tmpbuf[TMPBUFLEN]; | 
|  |  | 
|  | if (!info || !info->screen_base) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (p > info->fix.smem_len) | 
|  | return -ENOSPC; | 
|  | if (count >= info->fix.smem_len) | 
|  | count = info->fix.smem_len; | 
|  | err = 0; | 
|  | if (count + p > info->fix.smem_len) { | 
|  | count = info->fix.smem_len - p; | 
|  | err = -ENOSPC; | 
|  | } | 
|  |  | 
|  | p += (unsigned long)info->screen_base; | 
|  | c = count; | 
|  | while (c) { | 
|  | int len = c > sizeof(tmpbuf) ? sizeof(tmpbuf) : c; | 
|  | err = -EFAULT; | 
|  | if (copy_from_user(&tmpbuf, buf, len)) | 
|  | break; | 
|  | memcpy_toio(p, &tmpbuf, len); | 
|  | c -= len; | 
|  | p += len; | 
|  | buf += len; | 
|  | *ppos += len; | 
|  | } | 
|  | if (count-c) | 
|  | return (count-c); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int | 
|  | stifb_setcolreg(u_int regno, u_int red, u_int green, | 
|  | u_int blue, u_int transp, struct fb_info *info) | 
|  | { | 
|  | struct stifb_info *fb = (struct stifb_info *) info; | 
|  | u32 color; | 
|  |  | 
|  | if (regno >= 256)  /* no. of hw registers */ | 
|  | return 1; | 
|  |  | 
|  | red   >>= 8; | 
|  | green >>= 8; | 
|  | blue  >>= 8; | 
|  |  | 
|  | DEBUG_OFF(); | 
|  |  | 
|  | START_IMAGE_COLORMAP_ACCESS(fb); | 
|  |  | 
|  | if (fb->info.var.grayscale) { | 
|  | /* gray = 0.30*R + 0.59*G + 0.11*B */ | 
|  | color = ((red * 77) + | 
|  | (green * 151) + | 
|  | (blue * 28)) >> 8; | 
|  | } else { | 
|  | color = ((red << 16) | | 
|  | (green << 8) | | 
|  | (blue)); | 
|  | } | 
|  |  | 
|  | if (info->var.bits_per_pixel == 32) { | 
|  | ((u32 *)(info->pseudo_palette))[regno] = | 
|  | (red   << info->var.red.offset)   | | 
|  | (green << info->var.green.offset) | | 
|  | (blue  << info->var.blue.offset); | 
|  | } else { | 
|  | ((u32 *)(info->pseudo_palette))[regno] = regno; | 
|  | } | 
|  |  | 
|  | WRITE_IMAGE_COLOR(fb, regno, color); | 
|  |  | 
|  | if (fb->id == S9000_ID_HCRX) { | 
|  | NgleLutBltCtl lutBltCtl; | 
|  |  | 
|  | lutBltCtl = setHyperLutBltCtl(fb, | 
|  | 0,	/* Offset w/i LUT */ | 
|  | 256);	/* Load entire LUT */ | 
|  | NGLE_BINC_SET_SRCADDR(fb, | 
|  | NGLE_LONG_FB_ADDRESS(0, 0x100, 0)); | 
|  | /* 0x100 is same as used in WRITE_IMAGE_COLOR() */ | 
|  | START_COLORMAPLOAD(fb, lutBltCtl.all); | 
|  | SETUP_FB(fb); | 
|  | } else { | 
|  | /* cleanup colormap hardware */ | 
|  | FINISH_IMAGE_COLORMAP_ACCESS(fb); | 
|  | } | 
|  |  | 
|  | DEBUG_ON(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | stifb_blank(int blank_mode, struct fb_info *info) | 
|  | { | 
|  | struct stifb_info *fb = (struct stifb_info *) info; | 
|  | int enable = (blank_mode == 0) ? ENABLE : DISABLE; | 
|  |  | 
|  | switch (fb->id) { | 
|  | case S9000_ID_A1439A: | 
|  | CRX24_ENABLE_DISABLE_DISPLAY(fb, enable); | 
|  | break; | 
|  | case CRT_ID_VISUALIZE_EG: | 
|  | case S9000_ID_ARTIST: | 
|  | ARTIST_ENABLE_DISABLE_DISPLAY(fb, enable); | 
|  | break; | 
|  | case S9000_ID_HCRX: | 
|  | HYPER_ENABLE_DISABLE_DISPLAY(fb, enable); | 
|  | break; | 
|  | case S9000_ID_A1659A:;	/* fall through */ | 
|  | case S9000_ID_TIMBER:; | 
|  | case CRX24_OVERLAY_PLANES:; | 
|  | default: | 
|  | ENABLE_DISABLE_DISPLAY(fb, enable); | 
|  | break; | 
|  | } | 
|  |  | 
|  | SETUP_FB(fb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __init | 
|  | stifb_init_display(struct stifb_info *fb) | 
|  | { | 
|  | int id = fb->id; | 
|  |  | 
|  | SETUP_FB(fb); | 
|  |  | 
|  | /* HCRX specific initialization */ | 
|  | SETUP_HCRX(fb); | 
|  |  | 
|  | /* | 
|  | if (id == S9000_ID_HCRX) | 
|  | hyperInitSprite(fb); | 
|  | else | 
|  | ngleInitSprite(fb); | 
|  | */ | 
|  |  | 
|  | /* Initialize the image planes. */ | 
|  | switch (id) { | 
|  | case S9000_ID_HCRX: | 
|  | hyperResetPlanes(fb, ENABLE); | 
|  | break; | 
|  | case S9000_ID_A1439A: | 
|  | rattlerSetupPlanes(fb); | 
|  | break; | 
|  | case S9000_ID_A1659A: | 
|  | case S9000_ID_ARTIST: | 
|  | case CRT_ID_VISUALIZE_EG: | 
|  | elkSetupPlanes(fb); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Clear attribute planes on non HCRX devices. */ | 
|  | switch (id) { | 
|  | case S9000_ID_A1659A: | 
|  | case S9000_ID_A1439A: | 
|  | if (fb->info.var.bits_per_pixel == 32) | 
|  | ngleSetupAttrPlanes(fb, BUFF1_CMAP3); | 
|  | else { | 
|  | ngleSetupAttrPlanes(fb, BUFF1_CMAP0); | 
|  | } | 
|  | if (id == S9000_ID_A1439A) | 
|  | ngleClearOverlayPlanes(fb, 0xff, 0); | 
|  | break; | 
|  | case S9000_ID_ARTIST: | 
|  | case CRT_ID_VISUALIZE_EG: | 
|  | if (fb->info.var.bits_per_pixel == 32) | 
|  | ngleSetupAttrPlanes(fb, BUFF1_CMAP3); | 
|  | else { | 
|  | ngleSetupAttrPlanes(fb, ARTIST_CMAP0); | 
|  | } | 
|  | break; | 
|  | } | 
|  | stifb_blank(0, (struct fb_info *)fb);	/* 0=enable screen */ | 
|  |  | 
|  | SETUP_FB(fb); | 
|  | } | 
|  |  | 
|  | /* ------------ Interfaces to hardware functions ------------ */ | 
|  |  | 
|  | static struct fb_ops stifb_ops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .fb_read	= stifb_read, | 
|  | .fb_write	= stifb_write, | 
|  | .fb_setcolreg	= stifb_setcolreg, | 
|  | .fb_blank	= stifb_blank, | 
|  | .fb_fillrect	= cfb_fillrect, | 
|  | .fb_copyarea	= cfb_copyarea, | 
|  | .fb_imageblit	= cfb_imageblit, | 
|  | .fb_cursor      = soft_cursor, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* | 
|  | *  Initialization | 
|  | */ | 
|  |  | 
|  | int __init | 
|  | stifb_init_fb(struct sti_struct *sti, int bpp_pref) | 
|  | { | 
|  | struct fb_fix_screeninfo *fix; | 
|  | struct fb_var_screeninfo *var; | 
|  | struct stifb_info *fb; | 
|  | struct fb_info *info; | 
|  | unsigned long sti_rom_address; | 
|  | char *dev_name; | 
|  | int bpp, xres, yres; | 
|  |  | 
|  | fb = kmalloc(sizeof(*fb), GFP_ATOMIC); | 
|  | if (!fb) { | 
|  | printk(KERN_ERR "stifb: Could not allocate stifb structure\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | info = &fb->info; | 
|  |  | 
|  | /* set struct to a known state */ | 
|  | memset(fb, 0, sizeof(*fb)); | 
|  | fix = &info->fix; | 
|  | var = &info->var; | 
|  |  | 
|  | fb->sti = sti; | 
|  | /* store upper 32bits of the graphics id */ | 
|  | fb->id = fb->sti->graphics_id[0]; | 
|  |  | 
|  | /* only supported cards are allowed */ | 
|  | switch (fb->id) { | 
|  | case CRT_ID_VISUALIZE_EG: | 
|  | /* look for a double buffering device like e.g. the | 
|  | "INTERNAL_EG_DX1024" in the RDI precisionbook laptop | 
|  | which won't work. The same device in non-double | 
|  | buffering mode returns "INTERNAL_EG_X1024". */ | 
|  | if (strstr(sti->outptr.dev_name, "EG_DX")) { | 
|  | printk(KERN_WARNING | 
|  | "stifb: ignoring '%s'. Disable double buffering in IPL menu.\n", | 
|  | sti->outptr.dev_name); | 
|  | goto out_err0; | 
|  | } | 
|  | /* fall though */ | 
|  | case S9000_ID_ARTIST: | 
|  | case S9000_ID_HCRX: | 
|  | case S9000_ID_TIMBER: | 
|  | case S9000_ID_A1659A: | 
|  | case S9000_ID_A1439A: | 
|  | break; | 
|  | default: | 
|  | printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n", | 
|  | sti->outptr.dev_name, fb->id); | 
|  | goto out_err0; | 
|  | } | 
|  |  | 
|  | /* default to 8 bpp on most graphic chips */ | 
|  | bpp = 8; | 
|  | xres = sti_onscreen_x(fb->sti); | 
|  | yres = sti_onscreen_y(fb->sti); | 
|  |  | 
|  | ngleGetDeviceRomData(fb); | 
|  |  | 
|  | /* get (virtual) io region base addr */ | 
|  | fix->mmio_start = REGION_BASE(fb,2); | 
|  | fix->mmio_len   = 0x400000; | 
|  |  | 
|  | /* Reject any device not in the NGLE family */ | 
|  | switch (fb->id) { | 
|  | case S9000_ID_A1659A:	/* CRX/A1659A */ | 
|  | break; | 
|  | case S9000_ID_ELM:	/* GRX, grayscale but else same as A1659A */ | 
|  | var->grayscale = 1; | 
|  | fb->id = S9000_ID_A1659A; | 
|  | break; | 
|  | case S9000_ID_TIMBER:	/* HP9000/710 Any (may be a grayscale device) */ | 
|  | dev_name = fb->sti->outptr.dev_name; | 
|  | if (strstr(dev_name, "GRAYSCALE") || | 
|  | strstr(dev_name, "Grayscale") || | 
|  | strstr(dev_name, "grayscale")) | 
|  | var->grayscale = 1; | 
|  | break; | 
|  | case S9000_ID_TOMCAT:	/* Dual CRX, behaves else like a CRX */ | 
|  | /* FIXME: TomCat supports two heads: | 
|  | * fb.iobase = REGION_BASE(fb_info,3); | 
|  | * fb.screen_base = (void*) REGION_BASE(fb_info,2); | 
|  | * for now we only support the left one ! */ | 
|  | xres = fb->ngle_rom.x_size_visible; | 
|  | yres = fb->ngle_rom.y_size_visible; | 
|  | fb->id = S9000_ID_A1659A; | 
|  | break; | 
|  | case S9000_ID_A1439A:	/* CRX24/A1439A */ | 
|  | bpp = 32; | 
|  | break; | 
|  | case S9000_ID_HCRX:	/* Hyperdrive/HCRX */ | 
|  | memset(&fb->ngle_rom, 0, sizeof(fb->ngle_rom)); | 
|  | if ((fb->sti->regions_phys[0] & 0xfc000000) == | 
|  | (fb->sti->regions_phys[2] & 0xfc000000)) | 
|  | sti_rom_address = fb->sti->regions_phys[0]; | 
|  | else | 
|  | sti_rom_address = fb->sti->regions_phys[1]; | 
|  | #ifdef __LP64__ | 
|  | sti_rom_address |= 0xffffffff00000000; | 
|  | #endif | 
|  | fb->deviceSpecificConfig = gsc_readl(sti_rom_address); | 
|  | if (IS_24_DEVICE(fb)) { | 
|  | if (bpp_pref == 8 || bpp_pref == 32) | 
|  | bpp = bpp_pref; | 
|  | else | 
|  | bpp = 32; | 
|  | } else | 
|  | bpp = 8; | 
|  | READ_WORD(fb, REG_15); | 
|  | SETUP_HW(fb); | 
|  | break; | 
|  | case CRT_ID_VISUALIZE_EG: | 
|  | case S9000_ID_ARTIST:	/* Artist */ | 
|  | break; | 
|  | default: | 
|  | #ifdef FALLBACK_TO_1BPP | 
|  | printk(KERN_WARNING | 
|  | "stifb: Unsupported graphics card (id=0x%08x) " | 
|  | "- now trying 1bpp mode instead\n", | 
|  | fb->id); | 
|  | bpp = 1;	/* default to 1 bpp */ | 
|  | break; | 
|  | #else | 
|  | printk(KERN_WARNING | 
|  | "stifb: Unsupported graphics card (id=0x%08x) " | 
|  | "- skipping.\n", | 
|  | fb->id); | 
|  | goto out_err0; | 
|  | #endif | 
|  | } | 
|  |  | 
|  |  | 
|  | /* get framebuffer physical and virtual base addr & len (64bit ready) */ | 
|  | fix->smem_start = F_EXTEND(fb->sti->regions_phys[1]); | 
|  | fix->smem_len = fb->sti->regions[1].region_desc.length * 4096; | 
|  |  | 
|  | fix->line_length = (fb->sti->glob_cfg->total_x * bpp) / 8; | 
|  | if (!fix->line_length) | 
|  | fix->line_length = 2048; /* default */ | 
|  |  | 
|  | /* limit fbsize to max visible screen size */ | 
|  | if (fix->smem_len > yres*fix->line_length) | 
|  | fix->smem_len = yres*fix->line_length; | 
|  |  | 
|  | fix->accel = FB_ACCEL_NONE; | 
|  |  | 
|  | switch (bpp) { | 
|  | case 1: | 
|  | fix->type = FB_TYPE_PLANES;	/* well, sort of */ | 
|  | fix->visual = FB_VISUAL_MONO10; | 
|  | var->red.length = var->green.length = var->blue.length = 1; | 
|  | break; | 
|  | case 8: | 
|  | fix->type = FB_TYPE_PACKED_PIXELS; | 
|  | fix->visual = FB_VISUAL_PSEUDOCOLOR; | 
|  | var->red.length = var->green.length = var->blue.length = 8; | 
|  | break; | 
|  | case 32: | 
|  | fix->type = FB_TYPE_PACKED_PIXELS; | 
|  | fix->visual = FB_VISUAL_TRUECOLOR; | 
|  | var->red.length = var->green.length = var->blue.length = var->transp.length = 8; | 
|  | var->blue.offset = 0; | 
|  | var->green.offset = 8; | 
|  | var->red.offset = 16; | 
|  | var->transp.offset = 24; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | var->xres = var->xres_virtual = xres; | 
|  | var->yres = var->yres_virtual = yres; | 
|  | var->bits_per_pixel = bpp; | 
|  |  | 
|  | strcpy(fix->id, "stifb"); | 
|  | info->fbops = &stifb_ops; | 
|  | info->screen_base = (void*) REGION_BASE(fb,1); | 
|  | info->flags = FBINFO_DEFAULT; | 
|  | info->pseudo_palette = &fb->pseudo_palette; | 
|  |  | 
|  | /* This has to been done !!! */ | 
|  | fb_alloc_cmap(&info->cmap, 256, 0); | 
|  | stifb_init_display(fb); | 
|  |  | 
|  | if (!request_mem_region(fix->smem_start, fix->smem_len, "stifb fb")) { | 
|  | printk(KERN_ERR "stifb: cannot reserve fb region 0x%04lx-0x%04lx\n", | 
|  | fix->smem_start, fix->smem_start+fix->smem_len); | 
|  | goto out_err1; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(fix->mmio_start, fix->mmio_len, "stifb mmio")) { | 
|  | printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n", | 
|  | fix->mmio_start, fix->mmio_start+fix->mmio_len); | 
|  | goto out_err2; | 
|  | } | 
|  |  | 
|  | if (register_framebuffer(&fb->info) < 0) | 
|  | goto out_err3; | 
|  |  | 
|  | sti->info = info; /* save for unregister_framebuffer() */ | 
|  |  | 
|  | printk(KERN_INFO | 
|  | "fb%d: %s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n", | 
|  | fb->info.node, | 
|  | fix->id, | 
|  | var->xres, | 
|  | var->yres, | 
|  | var->bits_per_pixel, | 
|  | sti->outptr.dev_name, | 
|  | fb->id, | 
|  | fix->mmio_start); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  |  | 
|  | out_err3: | 
|  | release_mem_region(fix->mmio_start, fix->mmio_len); | 
|  | out_err2: | 
|  | release_mem_region(fix->smem_start, fix->smem_len); | 
|  | out_err1: | 
|  | fb_dealloc_cmap(&info->cmap); | 
|  | out_err0: | 
|  | kfree(fb); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | static int stifb_disabled __initdata; | 
|  |  | 
|  | int __init | 
|  | stifb_setup(char *options); | 
|  |  | 
|  | int __init | 
|  | stifb_init(void) | 
|  | { | 
|  | struct sti_struct *sti; | 
|  | struct sti_struct *def_sti; | 
|  | int i; | 
|  |  | 
|  | #ifndef MODULE | 
|  | char *option = NULL; | 
|  |  | 
|  | if (fb_get_options("stifb", &option)) | 
|  | return -ENODEV; | 
|  | stifb_setup(option); | 
|  | #endif | 
|  | if (stifb_disabled) { | 
|  | printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | def_sti = sti_get_rom(0); | 
|  | if (def_sti) { | 
|  | for (i = 1; i <= MAX_STI_ROMS; i++) { | 
|  | sti = sti_get_rom(i); | 
|  | if (!sti) | 
|  | break; | 
|  | if (sti == def_sti) { | 
|  | stifb_init_fb(sti, stifb_bpp_pref[i - 1]); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 1; i <= MAX_STI_ROMS; i++) { | 
|  | sti = sti_get_rom(i); | 
|  | if (!sti) | 
|  | break; | 
|  | if (sti == def_sti) | 
|  | continue; | 
|  | stifb_init_fb(sti, stifb_bpp_pref[i - 1]); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  Cleanup | 
|  | */ | 
|  |  | 
|  | static void __exit | 
|  | stifb_cleanup(void) | 
|  | { | 
|  | struct sti_struct *sti; | 
|  | int i; | 
|  |  | 
|  | for (i = 1; i <= MAX_STI_ROMS; i++) { | 
|  | sti = sti_get_rom(i); | 
|  | if (!sti) | 
|  | break; | 
|  | if (sti->info) { | 
|  | struct fb_info *info = sti->info; | 
|  | unregister_framebuffer(sti->info); | 
|  | release_mem_region(info->fix.mmio_start, info->fix.mmio_len); | 
|  | release_mem_region(info->fix.smem_start, info->fix.smem_len); | 
|  | fb_dealloc_cmap(&info->cmap); | 
|  | kfree(info); | 
|  | } | 
|  | sti->info = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | int __init | 
|  | stifb_setup(char *options) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!options || !*options) | 
|  | return 0; | 
|  |  | 
|  | if (strncmp(options, "off", 3) == 0) { | 
|  | stifb_disabled = 1; | 
|  | options += 3; | 
|  | } | 
|  |  | 
|  | if (strncmp(options, "bpp", 3) == 0) { | 
|  | options += 3; | 
|  | for (i = 0; i < MAX_STI_ROMS; i++) { | 
|  | if (*options++ != ':') | 
|  | break; | 
|  | stifb_bpp_pref[i] = simple_strtoul(options, &options, 10); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | __setup("stifb=", stifb_setup); | 
|  |  | 
|  | module_init(stifb_init); | 
|  | module_exit(stifb_cleanup); | 
|  |  | 
|  | MODULE_AUTHOR("Helge Deller <deller@gmx.de>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>"); | 
|  | MODULE_DESCRIPTION("Framebuffer driver for HP's NGLE series graphics cards in HP PARISC machines"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  |  | 
|  | MODULE_PARM(bpp, "i"); | 
|  | MODULE_PARM_DESC(mem, "Bits per pixel (default: 8)"); | 
|  |  |