| /* |
| * fs/fs-writeback.c |
| * |
| * Copyright (C) 2002, Linus Torvalds. |
| * |
| * Contains all the functions related to writing back and waiting |
| * upon dirty inodes against superblocks, and writing back dirty |
| * pages against inodes. ie: data writeback. Writeout of the |
| * inode itself is not handled here. |
| * |
| * 10Apr2002 Andrew Morton |
| * Split out of fs/inode.c |
| * Additions for address_space-based writeback |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/pagemap.h> |
| #include <linux/kthread.h> |
| #include <linux/writeback.h> |
| #include <linux/blkdev.h> |
| #include <linux/backing-dev.h> |
| #include <linux/tracepoint.h> |
| #include <linux/device.h> |
| #include <linux/memcontrol.h> |
| #include "internal.h" |
| |
| /* |
| * 4MB minimal write chunk size |
| */ |
| #define MIN_WRITEBACK_PAGES (4096UL >> (PAGE_SHIFT - 10)) |
| |
| struct wb_completion { |
| atomic_t cnt; |
| }; |
| |
| /* |
| * Passed into wb_writeback(), essentially a subset of writeback_control |
| */ |
| struct wb_writeback_work { |
| long nr_pages; |
| struct super_block *sb; |
| unsigned long *older_than_this; |
| enum writeback_sync_modes sync_mode; |
| unsigned int tagged_writepages:1; |
| unsigned int for_kupdate:1; |
| unsigned int range_cyclic:1; |
| unsigned int for_background:1; |
| unsigned int for_sync:1; /* sync(2) WB_SYNC_ALL writeback */ |
| unsigned int auto_free:1; /* free on completion */ |
| enum wb_reason reason; /* why was writeback initiated? */ |
| |
| struct list_head list; /* pending work list */ |
| struct wb_completion *done; /* set if the caller waits */ |
| }; |
| |
| /* |
| * If one wants to wait for one or more wb_writeback_works, each work's |
| * ->done should be set to a wb_completion defined using the following |
| * macro. Once all work items are issued with wb_queue_work(), the caller |
| * can wait for the completion of all using wb_wait_for_completion(). Work |
| * items which are waited upon aren't freed automatically on completion. |
| */ |
| #define DEFINE_WB_COMPLETION_ONSTACK(cmpl) \ |
| struct wb_completion cmpl = { \ |
| .cnt = ATOMIC_INIT(1), \ |
| } |
| |
| |
| /* |
| * If an inode is constantly having its pages dirtied, but then the |
| * updates stop dirtytime_expire_interval seconds in the past, it's |
| * possible for the worst case time between when an inode has its |
| * timestamps updated and when they finally get written out to be two |
| * dirtytime_expire_intervals. We set the default to 12 hours (in |
| * seconds), which means most of the time inodes will have their |
| * timestamps written to disk after 12 hours, but in the worst case a |
| * few inodes might not their timestamps updated for 24 hours. |
| */ |
| unsigned int dirtytime_expire_interval = 12 * 60 * 60; |
| |
| static inline struct inode *wb_inode(struct list_head *head) |
| { |
| return list_entry(head, struct inode, i_io_list); |
| } |
| |
| /* |
| * Include the creation of the trace points after defining the |
| * wb_writeback_work structure and inline functions so that the definition |
| * remains local to this file. |
| */ |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/writeback.h> |
| |
| EXPORT_TRACEPOINT_SYMBOL_GPL(wbc_writepage); |
| |
| static bool wb_io_lists_populated(struct bdi_writeback *wb) |
| { |
| if (wb_has_dirty_io(wb)) { |
| return false; |
| } else { |
| set_bit(WB_has_dirty_io, &wb->state); |
| WARN_ON_ONCE(!wb->avg_write_bandwidth); |
| atomic_long_add(wb->avg_write_bandwidth, |
| &wb->bdi->tot_write_bandwidth); |
| return true; |
| } |
| } |
| |
| static void wb_io_lists_depopulated(struct bdi_writeback *wb) |
| { |
| if (wb_has_dirty_io(wb) && list_empty(&wb->b_dirty) && |
| list_empty(&wb->b_io) && list_empty(&wb->b_more_io)) { |
| clear_bit(WB_has_dirty_io, &wb->state); |
| WARN_ON_ONCE(atomic_long_sub_return(wb->avg_write_bandwidth, |
| &wb->bdi->tot_write_bandwidth) < 0); |
| } |
| } |
| |
| /** |
| * inode_io_list_move_locked - move an inode onto a bdi_writeback IO list |
| * @inode: inode to be moved |
| * @wb: target bdi_writeback |
| * @head: one of @wb->b_{dirty|io|more_io} |
| * |
| * Move @inode->i_io_list to @list of @wb and set %WB_has_dirty_io. |
| * Returns %true if @inode is the first occupant of the !dirty_time IO |
| * lists; otherwise, %false. |
| */ |
| static bool inode_io_list_move_locked(struct inode *inode, |
| struct bdi_writeback *wb, |
| struct list_head *head) |
| { |
| assert_spin_locked(&wb->list_lock); |
| |
| list_move(&inode->i_io_list, head); |
| |
| /* dirty_time doesn't count as dirty_io until expiration */ |
| if (head != &wb->b_dirty_time) |
| return wb_io_lists_populated(wb); |
| |
| wb_io_lists_depopulated(wb); |
| return false; |
| } |
| |
| /** |
| * inode_io_list_del_locked - remove an inode from its bdi_writeback IO list |
| * @inode: inode to be removed |
| * @wb: bdi_writeback @inode is being removed from |
| * |
| * Remove @inode which may be on one of @wb->b_{dirty|io|more_io} lists and |
| * clear %WB_has_dirty_io if all are empty afterwards. |
| */ |
| static void inode_io_list_del_locked(struct inode *inode, |
| struct bdi_writeback *wb) |
| { |
| assert_spin_locked(&wb->list_lock); |
| |
| list_del_init(&inode->i_io_list); |
| wb_io_lists_depopulated(wb); |
| } |
| |
| static void wb_wakeup(struct bdi_writeback *wb) |
| { |
| spin_lock_bh(&wb->work_lock); |
| if (test_bit(WB_registered, &wb->state)) |
| mod_delayed_work(bdi_wq, &wb->dwork, 0); |
| spin_unlock_bh(&wb->work_lock); |
| } |
| |
| static void finish_writeback_work(struct bdi_writeback *wb, |
| struct wb_writeback_work *work) |
| { |
| struct wb_completion *done = work->done; |
| |
| if (work->auto_free) |
| kfree(work); |
| if (done && atomic_dec_and_test(&done->cnt)) |
| wake_up_all(&wb->bdi->wb_waitq); |
| } |
| |
| static void wb_queue_work(struct bdi_writeback *wb, |
| struct wb_writeback_work *work) |
| { |
| trace_writeback_queue(wb, work); |
| |
| if (work->done) |
| atomic_inc(&work->done->cnt); |
| |
| spin_lock_bh(&wb->work_lock); |
| |
| if (test_bit(WB_registered, &wb->state)) { |
| list_add_tail(&work->list, &wb->work_list); |
| mod_delayed_work(bdi_wq, &wb->dwork, 0); |
| } else |
| finish_writeback_work(wb, work); |
| |
| spin_unlock_bh(&wb->work_lock); |
| } |
| |
| /** |
| * wb_wait_for_completion - wait for completion of bdi_writeback_works |
| * @bdi: bdi work items were issued to |
| * @done: target wb_completion |
| * |
| * Wait for one or more work items issued to @bdi with their ->done field |
| * set to @done, which should have been defined with |
| * DEFINE_WB_COMPLETION_ONSTACK(). This function returns after all such |
| * work items are completed. Work items which are waited upon aren't freed |
| * automatically on completion. |
| */ |
| static void wb_wait_for_completion(struct backing_dev_info *bdi, |
| struct wb_completion *done) |
| { |
| atomic_dec(&done->cnt); /* put down the initial count */ |
| wait_event(bdi->wb_waitq, !atomic_read(&done->cnt)); |
| } |
| |
| #ifdef CONFIG_CGROUP_WRITEBACK |
| |
| /* parameters for foreign inode detection, see wb_detach_inode() */ |
| #define WB_FRN_TIME_SHIFT 13 /* 1s = 2^13, upto 8 secs w/ 16bit */ |
| #define WB_FRN_TIME_AVG_SHIFT 3 /* avg = avg * 7/8 + new * 1/8 */ |
| #define WB_FRN_TIME_CUT_DIV 2 /* ignore rounds < avg / 2 */ |
| #define WB_FRN_TIME_PERIOD (2 * (1 << WB_FRN_TIME_SHIFT)) /* 2s */ |
| |
| #define WB_FRN_HIST_SLOTS 16 /* inode->i_wb_frn_history is 16bit */ |
| #define WB_FRN_HIST_UNIT (WB_FRN_TIME_PERIOD / WB_FRN_HIST_SLOTS) |
| /* each slot's duration is 2s / 16 */ |
| #define WB_FRN_HIST_THR_SLOTS (WB_FRN_HIST_SLOTS / 2) |
| /* if foreign slots >= 8, switch */ |
| #define WB_FRN_HIST_MAX_SLOTS (WB_FRN_HIST_THR_SLOTS / 2 + 1) |
| /* one round can affect upto 5 slots */ |
| |
| static atomic_t isw_nr_in_flight = ATOMIC_INIT(0); |
| static struct workqueue_struct *isw_wq; |
| |
| void __inode_attach_wb(struct inode *inode, struct page *page) |
| { |
| struct backing_dev_info *bdi = inode_to_bdi(inode); |
| struct bdi_writeback *wb = NULL; |
| |
| if (inode_cgwb_enabled(inode)) { |
| struct cgroup_subsys_state *memcg_css; |
| |
| if (page) { |
| memcg_css = mem_cgroup_css_from_page(page); |
| wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC); |
| } else { |
| /* must pin memcg_css, see wb_get_create() */ |
| memcg_css = task_get_css(current, memory_cgrp_id); |
| wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC); |
| css_put(memcg_css); |
| } |
| } |
| |
| if (!wb) |
| wb = &bdi->wb; |
| |
| /* |
| * There may be multiple instances of this function racing to |
| * update the same inode. Use cmpxchg() to tell the winner. |
| */ |
| if (unlikely(cmpxchg(&inode->i_wb, NULL, wb))) |
| wb_put(wb); |
| } |
| |
| /** |
| * locked_inode_to_wb_and_lock_list - determine a locked inode's wb and lock it |
| * @inode: inode of interest with i_lock held |
| * |
| * Returns @inode's wb with its list_lock held. @inode->i_lock must be |
| * held on entry and is released on return. The returned wb is guaranteed |
| * to stay @inode's associated wb until its list_lock is released. |
| */ |
| static struct bdi_writeback * |
| locked_inode_to_wb_and_lock_list(struct inode *inode) |
| __releases(&inode->i_lock) |
| __acquires(&wb->list_lock) |
| { |
| while (true) { |
| struct bdi_writeback *wb = inode_to_wb(inode); |
| |
| /* |
| * inode_to_wb() association is protected by both |
| * @inode->i_lock and @wb->list_lock but list_lock nests |
| * outside i_lock. Drop i_lock and verify that the |
| * association hasn't changed after acquiring list_lock. |
| */ |
| wb_get(wb); |
| spin_unlock(&inode->i_lock); |
| spin_lock(&wb->list_lock); |
| |
| /* i_wb may have changed inbetween, can't use inode_to_wb() */ |
| if (likely(wb == inode->i_wb)) { |
| wb_put(wb); /* @inode already has ref */ |
| return wb; |
| } |
| |
| spin_unlock(&wb->list_lock); |
| wb_put(wb); |
| cpu_relax(); |
| spin_lock(&inode->i_lock); |
| } |
| } |
| |
| /** |
| * inode_to_wb_and_lock_list - determine an inode's wb and lock it |
| * @inode: inode of interest |
| * |
| * Same as locked_inode_to_wb_and_lock_list() but @inode->i_lock isn't held |
| * on entry. |
| */ |
| static struct bdi_writeback *inode_to_wb_and_lock_list(struct inode *inode) |
| __acquires(&wb->list_lock) |
| { |
| spin_lock(&inode->i_lock); |
| return locked_inode_to_wb_and_lock_list(inode); |
| } |
| |
| struct inode_switch_wbs_context { |
| struct inode *inode; |
| struct bdi_writeback *new_wb; |
| |
| struct rcu_head rcu_head; |
| struct work_struct work; |
| }; |
| |
| static void inode_switch_wbs_work_fn(struct work_struct *work) |
| { |
| struct inode_switch_wbs_context *isw = |
| container_of(work, struct inode_switch_wbs_context, work); |
| struct inode *inode = isw->inode; |
| struct address_space *mapping = inode->i_mapping; |
| struct bdi_writeback *old_wb = inode->i_wb; |
| struct bdi_writeback *new_wb = isw->new_wb; |
| struct radix_tree_iter iter; |
| bool switched = false; |
| void **slot; |
| |
| /* |
| * By the time control reaches here, RCU grace period has passed |
| * since I_WB_SWITCH assertion and all wb stat update transactions |
| * between unlocked_inode_to_wb_begin/end() are guaranteed to be |
| * synchronizing against mapping->tree_lock. |
| * |
| * Grabbing old_wb->list_lock, inode->i_lock and mapping->tree_lock |
| * gives us exclusion against all wb related operations on @inode |
| * including IO list manipulations and stat updates. |
| */ |
| if (old_wb < new_wb) { |
| spin_lock(&old_wb->list_lock); |
| spin_lock_nested(&new_wb->list_lock, SINGLE_DEPTH_NESTING); |
| } else { |
| spin_lock(&new_wb->list_lock); |
| spin_lock_nested(&old_wb->list_lock, SINGLE_DEPTH_NESTING); |
| } |
| spin_lock(&inode->i_lock); |
| spin_lock_irq(&mapping->tree_lock); |
| |
| /* |
| * Once I_FREEING is visible under i_lock, the eviction path owns |
| * the inode and we shouldn't modify ->i_io_list. |
| */ |
| if (unlikely(inode->i_state & I_FREEING)) |
| goto skip_switch; |
| |
| /* |
| * Count and transfer stats. Note that PAGECACHE_TAG_DIRTY points |
| * to possibly dirty pages while PAGECACHE_TAG_WRITEBACK points to |
| * pages actually under underwriteback. |
| */ |
| radix_tree_for_each_tagged(slot, &mapping->page_tree, &iter, 0, |
| PAGECACHE_TAG_DIRTY) { |
| struct page *page = radix_tree_deref_slot_protected(slot, |
| &mapping->tree_lock); |
| if (likely(page) && PageDirty(page)) { |
| dec_wb_stat(old_wb, WB_RECLAIMABLE); |
| inc_wb_stat(new_wb, WB_RECLAIMABLE); |
| } |
| } |
| |
| radix_tree_for_each_tagged(slot, &mapping->page_tree, &iter, 0, |
| PAGECACHE_TAG_WRITEBACK) { |
| struct page *page = radix_tree_deref_slot_protected(slot, |
| &mapping->tree_lock); |
| if (likely(page)) { |
| WARN_ON_ONCE(!PageWriteback(page)); |
| dec_wb_stat(old_wb, WB_WRITEBACK); |
| inc_wb_stat(new_wb, WB_WRITEBACK); |
| } |
| } |
| |
| wb_get(new_wb); |
| |
| /* |
| * Transfer to @new_wb's IO list if necessary. The specific list |
| * @inode was on is ignored and the inode is put on ->b_dirty which |
| * is always correct including from ->b_dirty_time. The transfer |
| * preserves @inode->dirtied_when ordering. |
| */ |
| if (!list_empty(&inode->i_io_list)) { |
| struct inode *pos; |
| |
| inode_io_list_del_locked(inode, old_wb); |
| inode->i_wb = new_wb; |
| list_for_each_entry(pos, &new_wb->b_dirty, i_io_list) |
| if (time_after_eq(inode->dirtied_when, |
| pos->dirtied_when)) |
| break; |
| inode_io_list_move_locked(inode, new_wb, pos->i_io_list.prev); |
| } else { |
| inode->i_wb = new_wb; |
| } |
| |
| /* ->i_wb_frn updates may race wbc_detach_inode() but doesn't matter */ |
| inode->i_wb_frn_winner = 0; |
| inode->i_wb_frn_avg_time = 0; |
| inode->i_wb_frn_history = 0; |
| switched = true; |
| skip_switch: |
| /* |
| * Paired with load_acquire in unlocked_inode_to_wb_begin() and |
| * ensures that the new wb is visible if they see !I_WB_SWITCH. |
| */ |
| smp_store_release(&inode->i_state, inode->i_state & ~I_WB_SWITCH); |
| |
| spin_unlock_irq(&mapping->tree_lock); |
| spin_unlock(&inode->i_lock); |
| spin_unlock(&new_wb->list_lock); |
| spin_unlock(&old_wb->list_lock); |
| |
| if (switched) { |
| wb_wakeup(new_wb); |
| wb_put(old_wb); |
| } |
| wb_put(new_wb); |
| |
| iput(inode); |
| kfree(isw); |
| |
| atomic_dec(&isw_nr_in_flight); |
| } |
| |
| static void inode_switch_wbs_rcu_fn(struct rcu_head *rcu_head) |
| { |
| struct inode_switch_wbs_context *isw = container_of(rcu_head, |
| struct inode_switch_wbs_context, rcu_head); |
| |
| /* needs to grab bh-unsafe locks, bounce to work item */ |
| INIT_WORK(&isw->work, inode_switch_wbs_work_fn); |
| queue_work(isw_wq, &isw->work); |
| } |
| |
| /** |
| * inode_switch_wbs - change the wb association of an inode |
| * @inode: target inode |
| * @new_wb_id: ID of the new wb |
| * |
| * Switch @inode's wb association to the wb identified by @new_wb_id. The |
| * switching is performed asynchronously and may fail silently. |
| */ |
| static void inode_switch_wbs(struct inode *inode, int new_wb_id) |
| { |
| struct backing_dev_info *bdi = inode_to_bdi(inode); |
| struct cgroup_subsys_state *memcg_css; |
| struct inode_switch_wbs_context *isw; |
| |
| /* noop if seems to be already in progress */ |
| if (inode->i_state & I_WB_SWITCH) |
| return; |
| |
| isw = kzalloc(sizeof(*isw), GFP_ATOMIC); |
| if (!isw) |
| return; |
| |
| /* find and pin the new wb */ |
| rcu_read_lock(); |
| memcg_css = css_from_id(new_wb_id, &memory_cgrp_subsys); |
| if (memcg_css) |
| isw->new_wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC); |
| rcu_read_unlock(); |
| if (!isw->new_wb) |
| goto out_free; |
| |
| /* while holding I_WB_SWITCH, no one else can update the association */ |
| spin_lock(&inode->i_lock); |
| if (!(inode->i_sb->s_flags & MS_ACTIVE) || |
| inode->i_state & (I_WB_SWITCH | I_FREEING) || |
| inode_to_wb(inode) == isw->new_wb) { |
| spin_unlock(&inode->i_lock); |
| goto out_free; |
| } |
| inode->i_state |= I_WB_SWITCH; |
| __iget(inode); |
| spin_unlock(&inode->i_lock); |
| |
| isw->inode = inode; |
| |
| atomic_inc(&isw_nr_in_flight); |
| |
| /* |
| * In addition to synchronizing among switchers, I_WB_SWITCH tells |
| * the RCU protected stat update paths to grab the mapping's |
| * tree_lock so that stat transfer can synchronize against them. |
| * Let's continue after I_WB_SWITCH is guaranteed to be visible. |
| */ |
| call_rcu(&isw->rcu_head, inode_switch_wbs_rcu_fn); |
| return; |
| |
| out_free: |
| if (isw->new_wb) |
| wb_put(isw->new_wb); |
| kfree(isw); |
| } |
| |
| /** |
| * wbc_attach_and_unlock_inode - associate wbc with target inode and unlock it |
| * @wbc: writeback_control of interest |
| * @inode: target inode |
| * |
| * @inode is locked and about to be written back under the control of @wbc. |
| * Record @inode's writeback context into @wbc and unlock the i_lock. On |
| * writeback completion, wbc_detach_inode() should be called. This is used |
| * to track the cgroup writeback context. |
| */ |
| void wbc_attach_and_unlock_inode(struct writeback_control *wbc, |
| struct inode *inode) |
| { |
| if (!inode_cgwb_enabled(inode)) { |
| spin_unlock(&inode->i_lock); |
| return; |
| } |
| |
| wbc->wb = inode_to_wb(inode); |
| wbc->inode = inode; |
| |
| wbc->wb_id = wbc->wb->memcg_css->id; |
| wbc->wb_lcand_id = inode->i_wb_frn_winner; |
| wbc->wb_tcand_id = 0; |
| wbc->wb_bytes = 0; |
| wbc->wb_lcand_bytes = 0; |
| wbc->wb_tcand_bytes = 0; |
| |
| wb_get(wbc->wb); |
| spin_unlock(&inode->i_lock); |
| |
| /* |
| * A dying wb indicates that the memcg-blkcg mapping has changed |
| * and a new wb is already serving the memcg. Switch immediately. |
| */ |
| if (unlikely(wb_dying(wbc->wb))) |
| inode_switch_wbs(inode, wbc->wb_id); |
| } |
| |
| /** |
| * wbc_detach_inode - disassociate wbc from inode and perform foreign detection |
| * @wbc: writeback_control of the just finished writeback |
| * |
| * To be called after a writeback attempt of an inode finishes and undoes |
| * wbc_attach_and_unlock_inode(). Can be called under any context. |
| * |
| * As concurrent write sharing of an inode is expected to be very rare and |
| * memcg only tracks page ownership on first-use basis severely confining |
| * the usefulness of such sharing, cgroup writeback tracks ownership |
| * per-inode. While the support for concurrent write sharing of an inode |
| * is deemed unnecessary, an inode being written to by different cgroups at |
| * different points in time is a lot more common, and, more importantly, |
| * charging only by first-use can too readily lead to grossly incorrect |
| * behaviors (single foreign page can lead to gigabytes of writeback to be |
| * incorrectly attributed). |
| * |
| * To resolve this issue, cgroup writeback detects the majority dirtier of |
| * an inode and transfers the ownership to it. To avoid unnnecessary |
| * oscillation, the detection mechanism keeps track of history and gives |
| * out the switch verdict only if the foreign usage pattern is stable over |
| * a certain amount of time and/or writeback attempts. |
| * |
| * On each writeback attempt, @wbc tries to detect the majority writer |
| * using Boyer-Moore majority vote algorithm. In addition to the byte |
| * count from the majority voting, it also counts the bytes written for the |
| * current wb and the last round's winner wb (max of last round's current |
| * wb, the winner from two rounds ago, and the last round's majority |
| * candidate). Keeping track of the historical winner helps the algorithm |
| * to semi-reliably detect the most active writer even when it's not the |
| * absolute majority. |
| * |
| * Once the winner of the round is determined, whether the winner is |
| * foreign or not and how much IO time the round consumed is recorded in |
| * inode->i_wb_frn_history. If the amount of recorded foreign IO time is |
| * over a certain threshold, the switch verdict is given. |
| */ |
| void wbc_detach_inode(struct writeback_control *wbc) |
| { |
| struct bdi_writeback *wb = wbc->wb; |
| struct inode *inode = wbc->inode; |
| unsigned long avg_time, max_bytes, max_time; |
| u16 history; |
| int max_id; |
| |
| if (!wb) |
| return; |
| |
| history = inode->i_wb_frn_history; |
| avg_time = inode->i_wb_frn_avg_time; |
| |
| /* pick the winner of this round */ |
| if (wbc->wb_bytes >= wbc->wb_lcand_bytes && |
| wbc->wb_bytes >= wbc->wb_tcand_bytes) { |
| max_id = wbc->wb_id; |
| max_bytes = wbc->wb_bytes; |
| } else if (wbc->wb_lcand_bytes >= wbc->wb_tcand_bytes) { |
| max_id = wbc->wb_lcand_id; |
| max_bytes = wbc->wb_lcand_bytes; |
| } else { |
| max_id = wbc->wb_tcand_id; |
| max_bytes = wbc->wb_tcand_bytes; |
| } |
| |
| /* |
| * Calculate the amount of IO time the winner consumed and fold it |
| * into the running average kept per inode. If the consumed IO |
| * time is lower than avag / WB_FRN_TIME_CUT_DIV, ignore it for |
| * deciding whether to switch or not. This is to prevent one-off |
| * small dirtiers from skewing the verdict. |
| */ |
| max_time = DIV_ROUND_UP((max_bytes >> PAGE_SHIFT) << WB_FRN_TIME_SHIFT, |
| wb->avg_write_bandwidth); |
| if (avg_time) |
| avg_time += (max_time >> WB_FRN_TIME_AVG_SHIFT) - |
| (avg_time >> WB_FRN_TIME_AVG_SHIFT); |
| else |
| avg_time = max_time; /* immediate catch up on first run */ |
| |
| if (max_time >= avg_time / WB_FRN_TIME_CUT_DIV) { |
| int slots; |
| |
| /* |
| * The switch verdict is reached if foreign wb's consume |
| * more than a certain proportion of IO time in a |
| * WB_FRN_TIME_PERIOD. This is loosely tracked by 16 slot |
| * history mask where each bit represents one sixteenth of |
| * the period. Determine the number of slots to shift into |
| * history from @max_time. |
| */ |
| slots = min(DIV_ROUND_UP(max_time, WB_FRN_HIST_UNIT), |
| (unsigned long)WB_FRN_HIST_MAX_SLOTS); |
| history <<= slots; |
| if (wbc->wb_id != max_id) |
| history |= (1U << slots) - 1; |
| |
| /* |
| * Switch if the current wb isn't the consistent winner. |
| * If there are multiple closely competing dirtiers, the |
| * inode may switch across them repeatedly over time, which |
| * is okay. The main goal is avoiding keeping an inode on |
| * the wrong wb for an extended period of time. |
| */ |
| if (hweight32(history) > WB_FRN_HIST_THR_SLOTS) |
| inode_switch_wbs(inode, max_id); |
| } |
| |
| /* |
| * Multiple instances of this function may race to update the |
| * following fields but we don't mind occassional inaccuracies. |
| */ |
| inode->i_wb_frn_winner = max_id; |
| inode->i_wb_frn_avg_time = min(avg_time, (unsigned long)U16_MAX); |
| inode->i_wb_frn_history = history; |
| |
| wb_put(wbc->wb); |
| wbc->wb = NULL; |
| } |
| |
| /** |
| * wbc_account_io - account IO issued during writeback |
| * @wbc: writeback_control of the writeback in progress |
| * @page: page being written out |
| * @bytes: number of bytes being written out |
| * |
| * @bytes from @page are about to written out during the writeback |
| * controlled by @wbc. Keep the book for foreign inode detection. See |
| * wbc_detach_inode(). |
| */ |
| void wbc_account_io(struct writeback_control *wbc, struct page *page, |
| size_t bytes) |
| { |
| int id; |
| |
| /* |
| * pageout() path doesn't attach @wbc to the inode being written |
| * out. This is intentional as we don't want the function to block |
| * behind a slow cgroup. Ultimately, we want pageout() to kick off |
| * regular writeback instead of writing things out itself. |
| */ |
| if (!wbc->wb) |
| return; |
| |
| id = mem_cgroup_css_from_page(page)->id; |
| |
| if (id == wbc->wb_id) { |
| wbc->wb_bytes += bytes; |
| return; |
| } |
| |
| if (id == wbc->wb_lcand_id) |
| wbc->wb_lcand_bytes += bytes; |
| |
| /* Boyer-Moore majority vote algorithm */ |
| if (!wbc->wb_tcand_bytes) |
| wbc->wb_tcand_id = id; |
| if (id == wbc->wb_tcand_id) |
| wbc->wb_tcand_bytes += bytes; |
| else |
| wbc->wb_tcand_bytes -= min(bytes, wbc->wb_tcand_bytes); |
| } |
| EXPORT_SYMBOL_GPL(wbc_account_io); |
| |
| /** |
| * inode_congested - test whether an inode is congested |
| * @inode: inode to test for congestion (may be NULL) |
| * @cong_bits: mask of WB_[a]sync_congested bits to test |
| * |
| * Tests whether @inode is congested. @cong_bits is the mask of congestion |
| * bits to test and the return value is the mask of set bits. |
| * |
| * If cgroup writeback is enabled for @inode, the congestion state is |
| * determined by whether the cgwb (cgroup bdi_writeback) for the blkcg |
| * associated with @inode is congested; otherwise, the root wb's congestion |
| * state is used. |
| * |
| * @inode is allowed to be NULL as this function is often called on |
| * mapping->host which is NULL for the swapper space. |
| */ |
| int inode_congested(struct inode *inode, int cong_bits) |
| { |
| /* |
| * Once set, ->i_wb never becomes NULL while the inode is alive. |
| * Start transaction iff ->i_wb is visible. |
| */ |
| if (inode && inode_to_wb_is_valid(inode)) { |
| struct bdi_writeback *wb; |
| struct wb_lock_cookie lock_cookie = {}; |
| bool congested; |
| |
| wb = unlocked_inode_to_wb_begin(inode, &lock_cookie); |
| congested = wb_congested(wb, cong_bits); |
| unlocked_inode_to_wb_end(inode, &lock_cookie); |
| return congested; |
| } |
| |
| return wb_congested(&inode_to_bdi(inode)->wb, cong_bits); |
| } |
| EXPORT_SYMBOL_GPL(inode_congested); |
| |
| /** |
| * wb_split_bdi_pages - split nr_pages to write according to bandwidth |
| * @wb: target bdi_writeback to split @nr_pages to |
| * @nr_pages: number of pages to write for the whole bdi |
| * |
| * Split @wb's portion of @nr_pages according to @wb's write bandwidth in |
| * relation to the total write bandwidth of all wb's w/ dirty inodes on |
| * @wb->bdi. |
| */ |
| static long wb_split_bdi_pages(struct bdi_writeback *wb, long nr_pages) |
| { |
| unsigned long this_bw = wb->avg_write_bandwidth; |
| unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth); |
| |
| if (nr_pages == LONG_MAX) |
| return LONG_MAX; |
| |
| /* |
| * This may be called on clean wb's and proportional distribution |
| * may not make sense, just use the original @nr_pages in those |
| * cases. In general, we wanna err on the side of writing more. |
| */ |
| if (!tot_bw || this_bw >= tot_bw) |
| return nr_pages; |
| else |
| return DIV_ROUND_UP_ULL((u64)nr_pages * this_bw, tot_bw); |
| } |
| |
| /** |
| * bdi_split_work_to_wbs - split a wb_writeback_work to all wb's of a bdi |
| * @bdi: target backing_dev_info |
| * @base_work: wb_writeback_work to issue |
| * @skip_if_busy: skip wb's which already have writeback in progress |
| * |
| * Split and issue @base_work to all wb's (bdi_writeback's) of @bdi which |
| * have dirty inodes. If @base_work->nr_page isn't %LONG_MAX, it's |
| * distributed to the busy wbs according to each wb's proportion in the |
| * total active write bandwidth of @bdi. |
| */ |
| static void bdi_split_work_to_wbs(struct backing_dev_info *bdi, |
| struct wb_writeback_work *base_work, |
| bool skip_if_busy) |
| { |
| struct bdi_writeback *last_wb = NULL; |
| struct bdi_writeback *wb = list_entry(&bdi->wb_list, |
| struct bdi_writeback, bdi_node); |
| |
| might_sleep(); |
| restart: |
| rcu_read_lock(); |
| list_for_each_entry_continue_rcu(wb, &bdi->wb_list, bdi_node) { |
| DEFINE_WB_COMPLETION_ONSTACK(fallback_work_done); |
| struct wb_writeback_work fallback_work; |
| struct wb_writeback_work *work; |
| long nr_pages; |
| |
| if (last_wb) { |
| wb_put(last_wb); |
| last_wb = NULL; |
| } |
| |
| /* SYNC_ALL writes out I_DIRTY_TIME too */ |
| if (!wb_has_dirty_io(wb) && |
| (base_work->sync_mode == WB_SYNC_NONE || |
| list_empty(&wb->b_dirty_time))) |
| continue; |
| if (skip_if_busy && writeback_in_progress(wb)) |
| continue; |
| |
| nr_pages = wb_split_bdi_pages(wb, base_work->nr_pages); |
| |
| work = kmalloc(sizeof(*work), GFP_ATOMIC); |
| if (work) { |
| *work = *base_work; |
| work->nr_pages = nr_pages; |
| work->auto_free = 1; |
| wb_queue_work(wb, work); |
| continue; |
| } |
| |
| /* alloc failed, execute synchronously using on-stack fallback */ |
| work = &fallback_work; |
| *work = *base_work; |
| work->nr_pages = nr_pages; |
| work->auto_free = 0; |
| work->done = &fallback_work_done; |
| |
| wb_queue_work(wb, work); |
| |
| /* |
| * Pin @wb so that it stays on @bdi->wb_list. This allows |
| * continuing iteration from @wb after dropping and |
| * regrabbing rcu read lock. |
| */ |
| wb_get(wb); |
| last_wb = wb; |
| |
| rcu_read_unlock(); |
| wb_wait_for_completion(bdi, &fallback_work_done); |
| goto restart; |
| } |
| rcu_read_unlock(); |
| |
| if (last_wb) |
| wb_put(last_wb); |
| } |
| |
| /** |
| * cgroup_writeback_umount - flush inode wb switches for umount |
| * |
| * This function is called when a super_block is about to be destroyed and |
| * flushes in-flight inode wb switches. An inode wb switch goes through |
| * RCU and then workqueue, so the two need to be flushed in order to ensure |
| * that all previously scheduled switches are finished. As wb switches are |
| * rare occurrences and synchronize_rcu() can take a while, perform |
| * flushing iff wb switches are in flight. |
| */ |
| void cgroup_writeback_umount(void) |
| { |
| if (atomic_read(&isw_nr_in_flight)) { |
| synchronize_rcu(); |
| flush_workqueue(isw_wq); |
| } |
| } |
| |
| static int __init cgroup_writeback_init(void) |
| { |
| isw_wq = alloc_workqueue("inode_switch_wbs", 0, 0); |
| if (!isw_wq) |
| return -ENOMEM; |
| return 0; |
| } |
| fs_initcall(cgroup_writeback_init); |
| |
| #else /* CONFIG_CGROUP_WRITEBACK */ |
| |
| static struct bdi_writeback * |
| locked_inode_to_wb_and_lock_list(struct inode *inode) |
| __releases(&inode->i_lock) |
| __acquires(&wb->list_lock) |
| { |
| struct bdi_writeback *wb = inode_to_wb(inode); |
| |
| spin_unlock(&inode->i_lock); |
| spin_lock(&wb->list_lock); |
| return wb; |
| } |
| |
| static struct bdi_writeback *inode_to_wb_and_lock_list(struct inode *inode) |
| __acquires(&wb->list_lock) |
| { |
| struct bdi_writeback *wb = inode_to_wb(inode); |
| |
| spin_lock(&wb->list_lock); |
| return wb; |
| } |
| |
| static long wb_split_bdi_pages(struct bdi_writeback *wb, long nr_pages) |
| { |
| return nr_pages; |
| } |
| |
| static void bdi_split_work_to_wbs(struct backing_dev_info *bdi, |
| struct wb_writeback_work *base_work, |
| bool skip_if_busy) |
| { |
| might_sleep(); |
| |
| if (!skip_if_busy || !writeback_in_progress(&bdi->wb)) { |
| base_work->auto_free = 0; |
| wb_queue_work(&bdi->wb, base_work); |
| } |
| } |
| |
| #endif /* CONFIG_CGROUP_WRITEBACK */ |
| |
| void wb_start_writeback(struct bdi_writeback *wb, long nr_pages, |
| bool range_cyclic, enum wb_reason reason) |
| { |
| struct wb_writeback_work *work; |
| |
| if (!wb_has_dirty_io(wb)) |
| return; |
| |
| /* |
| * This is WB_SYNC_NONE writeback, so if allocation fails just |
| * wakeup the thread for old dirty data writeback |
| */ |
| work = kzalloc(sizeof(*work), |
| GFP_NOWAIT | __GFP_NOMEMALLOC | __GFP_NOWARN); |
| if (!work) { |
| trace_writeback_nowork(wb); |
| wb_wakeup(wb); |
| return; |
| } |
| |
| work->sync_mode = WB_SYNC_NONE; |
| work->nr_pages = nr_pages; |
| work->range_cyclic = range_cyclic; |
| work->reason = reason; |
| work->auto_free = 1; |
| |
| wb_queue_work(wb, work); |
| } |
| |
| /** |
| * wb_start_background_writeback - start background writeback |
| * @wb: bdi_writback to write from |
| * |
| * Description: |
| * This makes sure WB_SYNC_NONE background writeback happens. When |
| * this function returns, it is only guaranteed that for given wb |
| * some IO is happening if we are over background dirty threshold. |
| * Caller need not hold sb s_umount semaphore. |
| */ |
| void wb_start_background_writeback(struct bdi_writeback *wb) |
| { |
| /* |
| * We just wake up the flusher thread. It will perform background |
| * writeback as soon as there is no other work to do. |
| */ |
| trace_writeback_wake_background(wb); |
| wb_wakeup(wb); |
| } |
| |
| /* |
| * Remove the inode from the writeback list it is on. |
| */ |
| void inode_io_list_del(struct inode *inode) |
| { |
| struct bdi_writeback *wb; |
| |
| wb = inode_to_wb_and_lock_list(inode); |
| inode_io_list_del_locked(inode, wb); |
| spin_unlock(&wb->list_lock); |
| } |
| |
| /* |
| * mark an inode as under writeback on the sb |
| */ |
| void sb_mark_inode_writeback(struct inode *inode) |
| { |
| struct super_block *sb = inode->i_sb; |
| unsigned long flags; |
| |
| if (list_empty(&inode->i_wb_list)) { |
| spin_lock_irqsave(&sb->s_inode_wblist_lock, flags); |
| if (list_empty(&inode->i_wb_list)) { |
| list_add_tail(&inode->i_wb_list, &sb->s_inodes_wb); |
| trace_sb_mark_inode_writeback(inode); |
| } |
| spin_unlock_irqrestore(&sb->s_inode_wblist_lock, flags); |
| } |
| } |
| |
| /* |
| * clear an inode as under writeback on the sb |
| */ |
| void sb_clear_inode_writeback(struct inode *inode) |
| { |
| struct super_block *sb = inode->i_sb; |
| unsigned long flags; |
| |
| if (!list_empty(&inode->i_wb_list)) { |
| spin_lock_irqsave(&sb->s_inode_wblist_lock, flags); |
| if (!list_empty(&inode->i_wb_list)) { |
| list_del_init(&inode->i_wb_list); |
| trace_sb_clear_inode_writeback(inode); |
| } |
| spin_unlock_irqrestore(&sb->s_inode_wblist_lock, flags); |
| } |
| } |
| |
| /* |
| * Redirty an inode: set its when-it-was dirtied timestamp and move it to the |
| * furthest end of its superblock's dirty-inode list. |
| * |
| * Before stamping the inode's ->dirtied_when, we check to see whether it is |
| * already the most-recently-dirtied inode on the b_dirty list. If that is |
| * the case then the inode must have been redirtied while it was being written |
| * out and we don't reset its dirtied_when. |
| */ |
| static void redirty_tail(struct inode *inode, struct bdi_writeback *wb) |
| { |
| if (!list_empty(&wb->b_dirty)) { |
| struct inode *tail; |
| |
| tail = wb_inode(wb->b_dirty.next); |
| if (time_before(inode->dirtied_when, tail->dirtied_when)) |
| inode->dirtied_when = jiffies; |
| } |
| inode_io_list_move_locked(inode, wb, &wb->b_dirty); |
| } |
| |
| /* |
| * requeue inode for re-scanning after bdi->b_io list is exhausted. |
| */ |
| static void requeue_io(struct inode *inode, struct bdi_writeback *wb) |
| { |
| inode_io_list_move_locked(inode, wb, &wb->b_more_io); |
| } |
| |
| static void inode_sync_complete(struct inode *inode) |
| { |
| inode->i_state &= ~I_SYNC; |
| /* If inode is clean an unused, put it into LRU now... */ |
| inode_add_lru(inode); |
| /* Waiters must see I_SYNC cleared before being woken up */ |
| smp_mb(); |
| wake_up_bit(&inode->i_state, __I_SYNC); |
| } |
| |
| static bool inode_dirtied_after(struct inode *inode, unsigned long t) |
| { |
| bool ret = time_after(inode->dirtied_when, t); |
| #ifndef CONFIG_64BIT |
| /* |
| * For inodes being constantly redirtied, dirtied_when can get stuck. |
| * It _appears_ to be in the future, but is actually in distant past. |
| * This test is necessary to prevent such wrapped-around relative times |
| * from permanently stopping the whole bdi writeback. |
| */ |
| ret = ret && time_before_eq(inode->dirtied_when, jiffies); |
| #endif |
| return ret; |
| } |
| |
| #define EXPIRE_DIRTY_ATIME 0x0001 |
| |
| /* |
| * Move expired (dirtied before work->older_than_this) dirty inodes from |
| * @delaying_queue to @dispatch_queue. |
| */ |
| static int move_expired_inodes(struct list_head *delaying_queue, |
| struct list_head *dispatch_queue, |
| int flags, |
| struct wb_writeback_work *work) |
| { |
| unsigned long *older_than_this = NULL; |
| unsigned long expire_time; |
| LIST_HEAD(tmp); |
| struct list_head *pos, *node; |
| struct super_block *sb = NULL; |
| struct inode *inode; |
| int do_sb_sort = 0; |
| int moved = 0; |
| |
| if ((flags & EXPIRE_DIRTY_ATIME) == 0) |
| older_than_this = work->older_than_this; |
| else if (!work->for_sync) { |
| expire_time = jiffies - (dirtytime_expire_interval * HZ); |
| older_than_this = &expire_time; |
| } |
| while (!list_empty(delaying_queue)) { |
| inode = wb_inode(delaying_queue->prev); |
| if (older_than_this && |
| inode_dirtied_after(inode, *older_than_this)) |
| break; |
| list_move(&inode->i_io_list, &tmp); |
| moved++; |
| if (flags & EXPIRE_DIRTY_ATIME) |
| set_bit(__I_DIRTY_TIME_EXPIRED, &inode->i_state); |
| if (sb_is_blkdev_sb(inode->i_sb)) |
| continue; |
| if (sb && sb != inode->i_sb) |
| do_sb_sort = 1; |
| sb = inode->i_sb; |
| } |
| |
| /* just one sb in list, splice to dispatch_queue and we're done */ |
| if (!do_sb_sort) { |
| list_splice(&tmp, dispatch_queue); |
| goto out; |
| } |
| |
| /* Move inodes from one superblock together */ |
| while (!list_empty(&tmp)) { |
| sb = wb_inode(tmp.prev)->i_sb; |
| list_for_each_prev_safe(pos, node, &tmp) { |
| inode = wb_inode(pos); |
| if (inode->i_sb == sb) |
| list_move(&inode->i_io_list, dispatch_queue); |
| } |
| } |
| out: |
| return moved; |
| } |
| |
| /* |
| * Queue all expired dirty inodes for io, eldest first. |
| * Before |
| * newly dirtied b_dirty b_io b_more_io |
| * =============> gf edc BA |
| * After |
| * newly dirtied b_dirty b_io b_more_io |
| * =============> g fBAedc |
| * | |
| * +--> dequeue for IO |
| */ |
| static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work) |
| { |
| int moved; |
| |
| assert_spin_locked(&wb->list_lock); |
| list_splice_init(&wb->b_more_io, &wb->b_io); |
| moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, 0, work); |
| moved += move_expired_inodes(&wb->b_dirty_time, &wb->b_io, |
| EXPIRE_DIRTY_ATIME, work); |
| if (moved) |
| wb_io_lists_populated(wb); |
| trace_writeback_queue_io(wb, work, moved); |
| } |
| |
| static int write_inode(struct inode *inode, struct writeback_control *wbc) |
| { |
| int ret; |
| |
| if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode)) { |
| trace_writeback_write_inode_start(inode, wbc); |
| ret = inode->i_sb->s_op->write_inode(inode, wbc); |
| trace_writeback_write_inode(inode, wbc); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /* |
| * Wait for writeback on an inode to complete. Called with i_lock held. |
| * Caller must make sure inode cannot go away when we drop i_lock. |
| */ |
| static void __inode_wait_for_writeback(struct inode *inode) |
| __releases(inode->i_lock) |
| __acquires(inode->i_lock) |
| { |
| DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC); |
| wait_queue_head_t *wqh; |
| |
| wqh = bit_waitqueue(&inode->i_state, __I_SYNC); |
| while (inode->i_state & I_SYNC) { |
| spin_unlock(&inode->i_lock); |
| __wait_on_bit(wqh, &wq, bit_wait, |
| TASK_UNINTERRUPTIBLE); |
| spin_lock(&inode->i_lock); |
| } |
| } |
| |
| /* |
| * Wait for writeback on an inode to complete. Caller must have inode pinned. |
| */ |
| void inode_wait_for_writeback(struct inode *inode) |
| { |
| spin_lock(&inode->i_lock); |
| __inode_wait_for_writeback(inode); |
| spin_unlock(&inode->i_lock); |
| } |
| |
| /* |
| * Sleep until I_SYNC is cleared. This function must be called with i_lock |
| * held and drops it. It is aimed for callers not holding any inode reference |
| * so once i_lock is dropped, inode can go away. |
| */ |
| static void inode_sleep_on_writeback(struct inode *inode) |
| __releases(inode->i_lock) |
| { |
| DEFINE_WAIT(wait); |
| wait_queue_head_t *wqh = bit_waitqueue(&inode->i_state, __I_SYNC); |
| int sleep; |
| |
| prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE); |
| sleep = inode->i_state & I_SYNC; |
| spin_unlock(&inode->i_lock); |
| if (sleep) |
| schedule(); |
| finish_wait(wqh, &wait); |
| } |
| |
| /* |
| * Find proper writeback list for the inode depending on its current state and |
| * possibly also change of its state while we were doing writeback. Here we |
| * handle things such as livelock prevention or fairness of writeback among |
| * inodes. This function can be called only by flusher thread - noone else |
| * processes all inodes in writeback lists and requeueing inodes behind flusher |
| * thread's back can have unexpected consequences. |
| */ |
| static void requeue_inode(struct inode *inode, struct bdi_writeback *wb, |
| struct writeback_control *wbc) |
| { |
| if (inode->i_state & I_FREEING) |
| return; |
| |
| /* |
| * Sync livelock prevention. Each inode is tagged and synced in one |
| * shot. If still dirty, it will be redirty_tail()'ed below. Update |
| * the dirty time to prevent enqueue and sync it again. |
| */ |
| if ((inode->i_state & I_DIRTY) && |
| (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)) |
| inode->dirtied_when = jiffies; |
| |
| if (wbc->pages_skipped) { |
| /* |
| * writeback is not making progress due to locked |
| * buffers. Skip this inode for now. |
| */ |
| redirty_tail(inode, wb); |
| return; |
| } |
| |
| if (mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) { |
| /* |
| * We didn't write back all the pages. nfs_writepages() |
| * sometimes bales out without doing anything. |
| */ |
| if (wbc->nr_to_write <= 0) { |
| /* Slice used up. Queue for next turn. */ |
| requeue_io(inode, wb); |
| } else { |
| /* |
| * Writeback blocked by something other than |
| * congestion. Delay the inode for some time to |
| * avoid spinning on the CPU (100% iowait) |
| * retrying writeback of the dirty page/inode |
| * that cannot be performed immediately. |
| */ |
| redirty_tail(inode, wb); |
| } |
| } else if (inode->i_state & I_DIRTY) { |
| /* |
| * Filesystems can dirty the inode during writeback operations, |
| * such as delayed allocation during submission or metadata |
| * updates after data IO completion. |
| */ |
| redirty_tail(inode, wb); |
| } else if (inode->i_state & I_DIRTY_TIME) { |
| inode->dirtied_when = jiffies; |
| inode_io_list_move_locked(inode, wb, &wb->b_dirty_time); |
| } else { |
| /* The inode is clean. Remove from writeback lists. */ |
| inode_io_list_del_locked(inode, wb); |
| } |
| } |
| |
| /* |
| * Write out an inode and its dirty pages. Do not update the writeback list |
| * linkage. That is left to the caller. The caller is also responsible for |
| * setting I_SYNC flag and calling inode_sync_complete() to clear it. |
| */ |
| static int |
| __writeback_single_inode(struct inode *inode, struct writeback_control *wbc) |
| { |
| struct address_space *mapping = inode->i_mapping; |
| long nr_to_write = wbc->nr_to_write; |
| unsigned dirty; |
| int ret; |
| |
| WARN_ON(!(inode->i_state & I_SYNC)); |
| |
| trace_writeback_single_inode_start(inode, wbc, nr_to_write); |
| |
| ret = do_writepages(mapping, wbc); |
| |
| /* |
| * Make sure to wait on the data before writing out the metadata. |
| * This is important for filesystems that modify metadata on data |
| * I/O completion. We don't do it for sync(2) writeback because it has a |
| * separate, external IO completion path and ->sync_fs for guaranteeing |
| * inode metadata is written back correctly. |
| */ |
| if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync) { |
| int err = filemap_fdatawait(mapping); |
| if (ret == 0) |
| ret = err; |
| } |
| |
| /* |
| * Some filesystems may redirty the inode during the writeback |
| * due to delalloc, clear dirty metadata flags right before |
| * write_inode() |
| */ |
| spin_lock(&inode->i_lock); |
| |
| dirty = inode->i_state & I_DIRTY; |
| if (inode->i_state & I_DIRTY_TIME) { |
| if ((dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) || |
| wbc->sync_mode == WB_SYNC_ALL || |
| unlikely(inode->i_state & I_DIRTY_TIME_EXPIRED) || |
| unlikely(time_after(jiffies, |
| (inode->dirtied_time_when + |
| dirtytime_expire_interval * HZ)))) { |
| dirty |= I_DIRTY_TIME | I_DIRTY_TIME_EXPIRED; |
| trace_writeback_lazytime(inode); |
| } |
| } else |
| inode->i_state &= ~I_DIRTY_TIME_EXPIRED; |
| inode->i_state &= ~dirty; |
| |
| /* |
| * Paired with smp_mb() in __mark_inode_dirty(). This allows |
| * __mark_inode_dirty() to test i_state without grabbing i_lock - |
| * either they see the I_DIRTY bits cleared or we see the dirtied |
| * inode. |
| * |
| * I_DIRTY_PAGES is always cleared together above even if @mapping |
| * still has dirty pages. The flag is reinstated after smp_mb() if |
| * necessary. This guarantees that either __mark_inode_dirty() |
| * sees clear I_DIRTY_PAGES or we see PAGECACHE_TAG_DIRTY. |
| */ |
| smp_mb(); |
| |
| if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) |
| inode->i_state |= I_DIRTY_PAGES; |
| |
| spin_unlock(&inode->i_lock); |
| |
| if (dirty & I_DIRTY_TIME) |
| mark_inode_dirty_sync(inode); |
| /* Don't write the inode if only I_DIRTY_PAGES was set */ |
| if (dirty & ~I_DIRTY_PAGES) { |
| int err = write_inode(inode, wbc); |
| if (ret == 0) |
| ret = err; |
| } |
| trace_writeback_single_inode(inode, wbc, nr_to_write); |
| return ret; |
| } |
| |
| /* |
| * Write out an inode's dirty pages. Either the caller has an active reference |
| * on the inode or the inode has I_WILL_FREE set. |
| * |
| * This function is designed to be called for writing back one inode which |
| * we go e.g. from filesystem. Flusher thread uses __writeback_single_inode() |
| * and does more profound writeback list handling in writeback_sb_inodes(). |
| */ |
| static int writeback_single_inode(struct inode *inode, |
| struct writeback_control *wbc) |
| { |
| struct bdi_writeback *wb; |
| int ret = 0; |
| |
| spin_lock(&inode->i_lock); |
| if (!atomic_read(&inode->i_count)) |
| WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING))); |
| else |
| WARN_ON(inode->i_state & I_WILL_FREE); |
| |
| if (inode->i_state & I_SYNC) { |
| if (wbc->sync_mode != WB_SYNC_ALL) |
| goto out; |
| /* |
| * It's a data-integrity sync. We must wait. Since callers hold |
| * inode reference or inode has I_WILL_FREE set, it cannot go |
| * away under us. |
| */ |
| __inode_wait_for_writeback(inode); |
| } |
| WARN_ON(inode->i_state & I_SYNC); |
| /* |
| * Skip inode if it is clean and we have no outstanding writeback in |
| * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this |
| * function since flusher thread may be doing for example sync in |
| * parallel and if we move the inode, it could get skipped. So here we |
| * make sure inode is on some writeback list and leave it there unless |
| * we have completely cleaned the inode. |
| */ |
| if (!(inode->i_state & I_DIRTY_ALL) && |
| (wbc->sync_mode != WB_SYNC_ALL || |
| !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK))) |
| goto out; |
| inode->i_state |= I_SYNC; |
| wbc_attach_and_unlock_inode(wbc, inode); |
| |
| ret = __writeback_single_inode(inode, wbc); |
| |
| wbc_detach_inode(wbc); |
| |
| wb = inode_to_wb_and_lock_list(inode); |
| spin_lock(&inode->i_lock); |
| /* |
| * If inode is clean, remove it from writeback lists. Otherwise don't |
| * touch it. See comment above for explanation. |
| */ |
| if (!(inode->i_state & I_DIRTY_ALL)) |
| inode_io_list_del_locked(inode, wb); |
| spin_unlock(&wb->list_lock); |
| inode_sync_complete(inode); |
| out: |
| spin_unlock(&inode->i_lock); |
| return ret; |
| } |
| |
| static long writeback_chunk_size(struct bdi_writeback *wb, |
| struct wb_writeback_work *work) |
| { |
| long pages; |
| |
| /* |
| * WB_SYNC_ALL mode does livelock avoidance by syncing dirty |
| * inodes/pages in one big loop. Setting wbc.nr_to_write=LONG_MAX |
| * here avoids calling into writeback_inodes_wb() more than once. |
| * |
| * The intended call sequence for WB_SYNC_ALL writeback is: |
| * |
| * wb_writeback() |
| * writeback_sb_inodes() <== called only once |
| * write_cache_pages() <== called once for each inode |
| * (quickly) tag currently dirty pages |
| * (maybe slowly) sync all tagged pages |
| */ |
| if (work->sync_mode == WB_SYNC_ALL || work->tagged_writepages) |
| pages = LONG_MAX; |
| else { |
| pages = min(wb->avg_write_bandwidth / 2, |
| global_wb_domain.dirty_limit / DIRTY_SCOPE); |
| pages = min(pages, work->nr_pages); |
| pages = round_down(pages + MIN_WRITEBACK_PAGES, |
| MIN_WRITEBACK_PAGES); |
| } |
| |
| return pages; |
| } |
| |
| /* |
| * Write a portion of b_io inodes which belong to @sb. |
| * |
| * Return the number of pages and/or inodes written. |
| * |
| * NOTE! This is called with wb->list_lock held, and will |
| * unlock and relock that for each inode it ends up doing |
| * IO for. |
| */ |
| static long writeback_sb_inodes(struct super_block *sb, |
| struct bdi_writeback *wb, |
| struct wb_writeback_work *work) |
| { |
| struct writeback_control wbc = { |
| .sync_mode = work->sync_mode, |
| .tagged_writepages = work->tagged_writepages, |
| .for_kupdate = work->for_kupdate, |
| .for_background = work->for_background, |
| .for_sync = work->for_sync, |
| .range_cyclic = work->range_cyclic, |
| .range_start = 0, |
| .range_end = LLONG_MAX, |
| }; |
| unsigned long start_time = jiffies; |
| long write_chunk; |
| long wrote = 0; /* count both pages and inodes */ |
| |
| while (!list_empty(&wb->b_io)) { |
| struct inode *inode = wb_inode(wb->b_io.prev); |
| struct bdi_writeback *tmp_wb; |
| |
| if (inode->i_sb != sb) { |
| if (work->sb) { |
| /* |
| * We only want to write back data for this |
| * superblock, move all inodes not belonging |
| * to it back onto the dirty list. |
| */ |
| redirty_tail(inode, wb); |
| continue; |
| } |
| |
| /* |
| * The inode belongs to a different superblock. |
| * Bounce back to the caller to unpin this and |
| * pin the next superblock. |
| */ |
| break; |
| } |
| |
| /* |
| * Don't bother with new inodes or inodes being freed, first |
| * kind does not need periodic writeout yet, and for the latter |
| * kind writeout is handled by the freer. |
| */ |
| spin_lock(&inode->i_lock); |
| if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) { |
| spin_unlock(&inode->i_lock); |
| redirty_tail(inode, wb); |
| continue; |
| } |
| if ((inode->i_state & I_SYNC) && wbc.sync_mode != WB_SYNC_ALL) { |
| /* |
| * If this inode is locked for writeback and we are not |
| * doing writeback-for-data-integrity, move it to |
| * b_more_io so that writeback can proceed with the |
| * other inodes on s_io. |
| * |
| * We'll have another go at writing back this inode |
| * when we completed a full scan of b_io. |
| */ |
| spin_unlock(&inode->i_lock); |
| requeue_io(inode, wb); |
| trace_writeback_sb_inodes_requeue(inode); |
| continue; |
| } |
| spin_unlock(&wb->list_lock); |
| |
| /* |
| * We already requeued the inode if it had I_SYNC set and we |
| * are doing WB_SYNC_NONE writeback. So this catches only the |
| * WB_SYNC_ALL case. |
| */ |
| if (inode->i_state & I_SYNC) { |
| /* Wait for I_SYNC. This function drops i_lock... */ |
| inode_sleep_on_writeback(inode); |
| /* Inode may be gone, start again */ |
| spin_lock(&wb->list_lock); |
| continue; |
| } |
| inode->i_state |= I_SYNC; |
| wbc_attach_and_unlock_inode(&wbc, inode); |
| |
| write_chunk = writeback_chunk_size(wb, work); |
| wbc.nr_to_write = write_chunk; |
| wbc.pages_skipped = 0; |
| |
| /* |
| * We use I_SYNC to pin the inode in memory. While it is set |
| * evict_inode() will wait so the inode cannot be freed. |
| */ |
| __writeback_single_inode(inode, &wbc); |
| |
| wbc_detach_inode(&wbc); |
| work->nr_pages -= write_chunk - wbc.nr_to_write; |
| wrote += write_chunk - wbc.nr_to_write; |
| |
| if (need_resched()) { |
| /* |
| * We're trying to balance between building up a nice |
| * long list of IOs to improve our merge rate, and |
| * getting those IOs out quickly for anyone throttling |
| * in balance_dirty_pages(). cond_resched() doesn't |
| * unplug, so get our IOs out the door before we |
| * give up the CPU. |
| */ |
| blk_flush_plug(current); |
| cond_resched(); |
| } |
| |
| /* |
| * Requeue @inode if still dirty. Be careful as @inode may |
| * have been switched to another wb in the meantime. |
| */ |
| tmp_wb = inode_to_wb_and_lock_list(inode); |
| spin_lock(&inode->i_lock); |
| if (!(inode->i_state & I_DIRTY_ALL)) |
| wrote++; |
| requeue_inode(inode, tmp_wb, &wbc); |
| inode_sync_complete(inode); |
| spin_unlock(&inode->i_lock); |
| |
| if (unlikely(tmp_wb != wb)) { |
| spin_unlock(&tmp_wb->list_lock); |
| spin_lock(&wb->list_lock); |
| } |
| |
| /* |
| * bail out to wb_writeback() often enough to check |
| * background threshold and other termination conditions. |
| */ |
| if (wrote) { |
| if (time_is_before_jiffies(start_time + HZ / 10UL)) |
| break; |
| if (work->nr_pages <= 0) |
| break; |
| } |
| } |
| return wrote; |
| } |
| |
| static long __writeback_inodes_wb(struct bdi_writeback *wb, |
| struct wb_writeback_work *work) |
| { |
| unsigned long start_time = jiffies; |
| long wrote = 0; |
| |
| while (!list_empty(&wb->b_io)) { |
| struct inode *inode = wb_inode(wb->b_io.prev); |
| struct super_block *sb = inode->i_sb; |
| |
| if (!trylock_super(sb)) { |
| /* |
| * trylock_super() may fail consistently due to |
| * s_umount being grabbed by someone else. Don't use |
| * requeue_io() to avoid busy retrying the inode/sb. |
| */ |
| redirty_tail(inode, wb); |
| continue; |
| } |
| wrote += writeback_sb_inodes(sb, wb, work); |
| up_read(&sb->s_umount); |
| |
| /* refer to the same tests at the end of writeback_sb_inodes */ |
| if (wrote) { |
| if (time_is_before_jiffies(start_time + HZ / 10UL)) |
| break; |
| if (work->nr_pages <= 0) |
| break; |
| } |
| } |
| /* Leave any unwritten inodes on b_io */ |
| return wrote; |
| } |
| |
| static long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages, |
| enum wb_reason reason) |
| { |
| struct wb_writeback_work work = { |
| .nr_pages = nr_pages, |
| .sync_mode = WB_SYNC_NONE, |
| .range_cyclic = 1, |
| .reason = reason, |
| }; |
| struct blk_plug plug; |
| |
| blk_start_plug(&plug); |
| spin_lock(&wb->list_lock); |
| if (list_empty(&wb->b_io)) |
| queue_io(wb, &work); |
| __writeback_inodes_wb(wb, &work); |
| spin_unlock(&wb->list_lock); |
| blk_finish_plug(&plug); |
| |
| return nr_pages - work.nr_pages; |
| } |
| |
| /* |
| * Explicit flushing or periodic writeback of "old" data. |
| * |
| * Define "old": the first time one of an inode's pages is dirtied, we mark the |
| * dirtying-time in the inode's address_space. So this periodic writeback code |
| * just walks the superblock inode list, writing back any inodes which are |
| * older than a specific point in time. |
| * |
| * Try to run once per dirty_writeback_interval. But if a writeback event |
| * takes longer than a dirty_writeback_interval interval, then leave a |
| * one-second gap. |
| * |
| * older_than_this takes precedence over nr_to_write. So we'll only write back |
| * all dirty pages if they are all attached to "old" mappings. |
| */ |
| static long wb_writeback(struct bdi_writeback *wb, |
| struct wb_writeback_work *work) |
| { |
| unsigned long wb_start = jiffies; |
| long nr_pages = work->nr_pages; |
| unsigned long oldest_jif; |
| struct inode *inode; |
| long progress; |
| struct blk_plug plug; |
| |
| oldest_jif = jiffies; |
| work->older_than_this = &oldest_jif; |
| |
| blk_start_plug(&plug); |
| spin_lock(&wb->list_lock); |
| for (;;) { |
| /* |
| * Stop writeback when nr_pages has been consumed |
| */ |
| if (work->nr_pages <= 0) |
| break; |
| |
| /* |
| * Background writeout and kupdate-style writeback may |
| * run forever. Stop them if there is other work to do |
| * so that e.g. sync can proceed. They'll be restarted |
| * after the other works are all done. |
| */ |
| if ((work->for_background || work->for_kupdate) && |
| !list_empty(&wb->work_list)) |
| break; |
| |
| /* |
| * For background writeout, stop when we are below the |
| * background dirty threshold |
| */ |
| if (work->for_background && !wb_over_bg_thresh(wb)) |
| break; |
| |
| /* |
| * Kupdate and background works are special and we want to |
| * include all inodes that need writing. Livelock avoidance is |
| * handled by these works yielding to any other work so we are |
| * safe. |
| */ |
| if (work->for_kupdate) { |
| oldest_jif = jiffies - |
| msecs_to_jiffies(dirty_expire_interval * 10); |
| } else if (work->for_background) |
| oldest_jif = jiffies; |
| |
| trace_writeback_start(wb, work); |
| if (list_empty(&wb->b_io)) |
| queue_io(wb, work); |
| if (work->sb) |
| progress = writeback_sb_inodes(work->sb, wb, work); |
| else |
| progress = __writeback_inodes_wb(wb, work); |
| trace_writeback_written(wb, work); |
| |
| wb_update_bandwidth(wb, wb_start); |
| |
| /* |
| * Did we write something? Try for more |
| * |
| * Dirty inodes are moved to b_io for writeback in batches. |
| * The completion of the current batch does not necessarily |
| * mean the overall work is done. So we keep looping as long |
| * as made some progress on cleaning pages or inodes. |
| */ |
| if (progress) |
| continue; |
| /* |
| * No more inodes for IO, bail |
| */ |
| if (list_empty(&wb->b_more_io)) |
| break; |
| /* |
| * Nothing written. Wait for some inode to |
| * become available for writeback. Otherwise |
| * we'll just busyloop. |
| */ |
| trace_writeback_wait(wb, work); |
| inode = wb_inode(wb->b_more_io.prev); |
| spin_lock(&inode->i_lock); |
| spin_unlock(&wb->list_lock); |
| /* This function drops i_lock... */ |
| inode_sleep_on_writeback(inode); |
| spin_lock(&wb->list_lock); |
| } |
| spin_unlock(&wb->list_lock); |
| blk_finish_plug(&plug); |
| |
| return nr_pages - work->nr_pages; |
| } |
| |
| /* |
| * Return the next wb_writeback_work struct that hasn't been processed yet. |
| */ |
| static struct wb_writeback_work *get_next_work_item(struct bdi_writeback *wb) |
| { |
| struct wb_writeback_work *work = NULL; |
| |
| spin_lock_bh(&wb->work_lock); |
| if (!list_empty(&wb->work_list)) { |
| work = list_entry(wb->work_list.next, |
| struct wb_writeback_work, list); |
| list_del_init(&work->list); |
| } |
| spin_unlock_bh(&wb->work_lock); |
| return work; |
| } |
| |
| /* |
| * Add in the number of potentially dirty inodes, because each inode |
| * write can dirty pagecache in the underlying blockdev. |
| */ |
| static unsigned long get_nr_dirty_pages(void) |
| { |
| return global_node_page_state(NR_FILE_DIRTY) + |
| global_node_page_state(NR_UNSTABLE_NFS) + |
| get_nr_dirty_inodes(); |
| } |
| |
| static long wb_check_background_flush(struct bdi_writeback *wb) |
| { |
| if (wb_over_bg_thresh(wb)) { |
| |
| struct wb_writeback_work work = { |
| .nr_pages = LONG_MAX, |
| .sync_mode = WB_SYNC_NONE, |
| .for_background = 1, |
| .range_cyclic = 1, |
| .reason = WB_REASON_BACKGROUND, |
| }; |
| |
| return wb_writeback(wb, &work); |
| } |
| |
| return 0; |
| } |
| |
| static long wb_check_old_data_flush(struct bdi_writeback *wb) |
| { |
| unsigned long expired; |
| long nr_pages; |
| |
| /* |
| * When set to zero, disable periodic writeback |
| */ |
| if (!dirty_writeback_interval) |
| return 0; |
| |
| expired = wb->last_old_flush + |
| msecs_to_jiffies(dirty_writeback_interval * 10); |
| if (time_before(jiffies, expired)) |
| return 0; |
| |
| wb->last_old_flush = jiffies; |
| nr_pages = get_nr_dirty_pages(); |
| |
| if (nr_pages) { |
| struct wb_writeback_work work = { |
| .nr_pages = nr_pages, |
| .sync_mode = WB_SYNC_NONE, |
| .for_kupdate = 1, |
| .range_cyclic = 1, |
| .reason = WB_REASON_PERIODIC, |
| }; |
| |
| return wb_writeback(wb, &work); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Retrieve work items and do the writeback they describe |
| */ |
| static long wb_do_writeback(struct bdi_writeback *wb) |
| { |
| struct wb_writeback_work *work; |
| long wrote = 0; |
| |
| set_bit(WB_writeback_running, &wb->state); |
| while ((work = get_next_work_item(wb)) != NULL) { |
| trace_writeback_exec(wb, work); |
| wrote += wb_writeback(wb, work); |
| finish_writeback_work(wb, work); |
| } |
| |
| /* |
| * Check for periodic writeback, kupdated() style |
| */ |
| wrote += wb_check_old_data_flush(wb); |
| wrote += wb_check_background_flush(wb); |
| clear_bit(WB_writeback_running, &wb->state); |
| |
| return wrote; |
| } |
| |
| /* |
| * Handle writeback of dirty data for the device backed by this bdi. Also |
| * reschedules periodically and does kupdated style flushing. |
| */ |
| void wb_workfn(struct work_struct *work) |
| { |
| struct bdi_writeback *wb = container_of(to_delayed_work(work), |
| struct bdi_writeback, dwork); |
| long pages_written; |
| |
| set_worker_desc("flush-%s", dev_name(wb->bdi->dev)); |
| current->flags |= PF_SWAPWRITE; |
| |
| if (likely(!current_is_workqueue_rescuer() || |
| !test_bit(WB_registered, &wb->state))) { |
| /* |
| * The normal path. Keep writing back @wb until its |
| * work_list is empty. Note that this path is also taken |
| * if @wb is shutting down even when we're running off the |
| * rescuer as work_list needs to be drained. |
| */ |
| do { |
| pages_written = wb_do_writeback(wb); |
| trace_writeback_pages_written(pages_written); |
| } while (!list_empty(&wb->work_list)); |
| } else { |
| /* |
| * bdi_wq can't get enough workers and we're running off |
| * the emergency worker. Don't hog it. Hopefully, 1024 is |
| * enough for efficient IO. |
| */ |
| pages_written = writeback_inodes_wb(wb, 1024, |
| WB_REASON_FORKER_THREAD); |
| trace_writeback_pages_written(pages_written); |
| } |
| |
| if (!list_empty(&wb->work_list)) |
| wb_wakeup(wb); |
| else if (wb_has_dirty_io(wb) && dirty_writeback_interval) |
| wb_wakeup_delayed(wb); |
| |
| current->flags &= ~PF_SWAPWRITE; |
| } |
| |
| /* |
| * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back |
| * the whole world. |
| */ |
| void wakeup_flusher_threads(long nr_pages, enum wb_reason reason) |
| { |
| struct backing_dev_info *bdi; |
| |
| /* |
| * If we are expecting writeback progress we must submit plugged IO. |
| */ |
| if (blk_needs_flush_plug(current)) |
| blk_schedule_flush_plug(current); |
| |
| if (!nr_pages) |
| nr_pages = get_nr_dirty_pages(); |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) { |
| struct bdi_writeback *wb; |
| |
| if (!bdi_has_dirty_io(bdi)) |
| continue; |
| |
| list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node) |
| wb_start_writeback(wb, wb_split_bdi_pages(wb, nr_pages), |
| false, reason); |
| } |
| rcu_read_unlock(); |
| } |
| |
| /* |
| * Wake up bdi's periodically to make sure dirtytime inodes gets |
| * written back periodically. We deliberately do *not* check the |
| * b_dirtytime list in wb_has_dirty_io(), since this would cause the |
| * kernel to be constantly waking up once there are any dirtytime |
| * inodes on the system. So instead we define a separate delayed work |
| * function which gets called much more rarely. (By default, only |
| * once every 12 hours.) |
| * |
| * If there is any other write activity going on in the file system, |
| * this function won't be necessary. But if the only thing that has |
| * happened on the file system is a dirtytime inode caused by an atime |
| * update, we need this infrastructure below to make sure that inode |
| * eventually gets pushed out to disk. |
| */ |
| static void wakeup_dirtytime_writeback(struct work_struct *w); |
| static DECLARE_DELAYED_WORK(dirtytime_work, wakeup_dirtytime_writeback); |
| |
| static void wakeup_dirtytime_writeback(struct work_struct *w) |
| { |
| struct backing_dev_info *bdi; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) { |
| struct bdi_writeback *wb; |
| |
| list_for_each_entry_rcu(wb, &bdi->wb_list, bdi_node) |
| if (!list_empty(&wb->b_dirty_time)) |
| wb_wakeup(wb); |
| } |
| rcu_read_unlock(); |
| schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ); |
| } |
| |
| static int __init start_dirtytime_writeback(void) |
| { |
| schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ); |
| return 0; |
| } |
| __initcall(start_dirtytime_writeback); |
| |
| int dirtytime_interval_handler(struct ctl_table *table, int write, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); |
| if (ret == 0 && write) |
| mod_delayed_work(system_wq, &dirtytime_work, 0); |
| return ret; |
| } |
| |
| static noinline void block_dump___mark_inode_dirty(struct inode *inode) |
| { |
| if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) { |
| struct dentry *dentry; |
| const char *name = "?"; |
| |
| dentry = d_find_alias(inode); |
| if (dentry) { |
| spin_lock(&dentry->d_lock); |
| name = (const char *) dentry->d_name.name; |
| } |
| printk(KERN_DEBUG |
| "%s(%d): dirtied inode %lu (%s) on %s\n", |
| current->comm, task_pid_nr(current), inode->i_ino, |
| name, inode->i_sb->s_id); |
| if (dentry) { |
| spin_unlock(&dentry->d_lock); |
| dput(dentry); |
| } |
| } |
| } |
| |
| /** |
| * __mark_inode_dirty - internal function |
| * |
| * @inode: inode to mark |
| * @flags: what kind of dirty (i.e. I_DIRTY_SYNC) |
| * |
| * Mark an inode as dirty. Callers should use mark_inode_dirty or |
| * mark_inode_dirty_sync. |
| * |
| * Put the inode on the super block's dirty list. |
| * |
| * CAREFUL! We mark it dirty unconditionally, but move it onto the |
| * dirty list only if it is hashed or if it refers to a blockdev. |
| * If it was not hashed, it will never be added to the dirty list |
| * even if it is later hashed, as it will have been marked dirty already. |
| * |
| * In short, make sure you hash any inodes _before_ you start marking |
| * them dirty. |
| * |
| * Note that for blockdevs, inode->dirtied_when represents the dirtying time of |
| * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of |
| * the kernel-internal blockdev inode represents the dirtying time of the |
| * blockdev's pages. This is why for I_DIRTY_PAGES we always use |
| * page->mapping->host, so the page-dirtying time is recorded in the internal |
| * blockdev inode. |
| */ |
| void __mark_inode_dirty(struct inode *inode, int flags) |
| { |
| #define I_DIRTY_INODE (I_DIRTY_SYNC | I_DIRTY_DATASYNC) |
| struct super_block *sb = inode->i_sb; |
| int dirtytime; |
| |
| trace_writeback_mark_inode_dirty(inode, flags); |
| |
| /* |
| * Don't do this for I_DIRTY_PAGES - that doesn't actually |
| * dirty the inode itself |
| */ |
| if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_TIME)) { |
| trace_writeback_dirty_inode_start(inode, flags); |
| |
| if (sb->s_op->dirty_inode) |
| sb->s_op->dirty_inode(inode, flags); |
| |
| trace_writeback_dirty_inode(inode, flags); |
| } |
| if (flags & I_DIRTY_INODE) |
| flags &= ~I_DIRTY_TIME; |
| dirtytime = flags & I_DIRTY_TIME; |
| |
| /* |
| * Paired with smp_mb() in __writeback_single_inode() for the |
| * following lockless i_state test. See there for details. |
| */ |
| smp_mb(); |
| |
| if (((inode->i_state & flags) == flags) || |
| (dirtytime && (inode->i_state & I_DIRTY_INODE))) |
| return; |
| |
| if (unlikely(block_dump)) |
| block_dump___mark_inode_dirty(inode); |
| |
| spin_lock(&inode->i_lock); |
| if (dirtytime && (inode->i_state & I_DIRTY_INODE)) |
| goto out_unlock_inode; |
| if ((inode->i_state & flags) != flags) { |
| const int was_dirty = inode->i_state & I_DIRTY; |
| |
| inode_attach_wb(inode, NULL); |
| |
| if (flags & I_DIRTY_INODE) |
| inode->i_state &= ~I_DIRTY_TIME; |
| inode->i_state |= flags; |
| |
| /* |
| * If the inode is being synced, just update its dirty state. |
| * The unlocker will place the inode on the appropriate |
| * superblock list, based upon its state. |
| */ |
| if (inode->i_state & I_SYNC) |
| goto out_unlock_inode; |
| |
| /* |
| * Only add valid (hashed) inodes to the superblock's |
| * dirty list. Add blockdev inodes as well. |
| */ |
| if (!S_ISBLK(inode->i_mode)) { |
| if (inode_unhashed(inode)) |
| goto out_unlock_inode; |
| } |
| if (inode->i_state & I_FREEING) |
| goto out_unlock_inode; |
| |
| /* |
| * If the inode was already on b_dirty/b_io/b_more_io, don't |
| * reposition it (that would break b_dirty time-ordering). |
| */ |
| if (!was_dirty) { |
| struct bdi_writeback *wb; |
| struct list_head *dirty_list; |
| bool wakeup_bdi = false; |
| |
| wb = locked_inode_to_wb_and_lock_list(inode); |
| |
| WARN(bdi_cap_writeback_dirty(wb->bdi) && |
| !test_bit(WB_registered, &wb->state), |
| "bdi-%s not registered\n", wb->bdi->name); |
| |
| inode->dirtied_when = jiffies; |
| if (dirtytime) |
| inode->dirtied_time_when = jiffies; |
| |
| if (inode->i_state & (I_DIRTY_INODE | I_DIRTY_PAGES)) |
| dirty_list = &wb->b_dirty; |
| else |
| dirty_list = &wb->b_dirty_time; |
| |
| wakeup_bdi = inode_io_list_move_locked(inode, wb, |
| dirty_list); |
| |
| spin_unlock(&wb->list_lock); |
| trace_writeback_dirty_inode_enqueue(inode); |
| |
| /* |
| * If this is the first dirty inode for this bdi, |
| * we have to wake-up the corresponding bdi thread |
| * to make sure background write-back happens |
| * later. |
| */ |
| if (bdi_cap_writeback_dirty(wb->bdi) && wakeup_bdi) |
| wb_wakeup_delayed(wb); |
| return; |
| } |
| } |
| out_unlock_inode: |
| spin_unlock(&inode->i_lock); |
| |
| #undef I_DIRTY_INODE |
| } |
| EXPORT_SYMBOL(__mark_inode_dirty); |
| |
| /* |
| * The @s_sync_lock is used to serialise concurrent sync operations |
| * to avoid lock contention problems with concurrent wait_sb_inodes() calls. |
| * Concurrent callers will block on the s_sync_lock rather than doing contending |
| * walks. The queueing maintains sync(2) required behaviour as all the IO that |
| * has been issued up to the time this function is enter is guaranteed to be |
| * completed by the time we have gained the lock and waited for all IO that is |
| * in progress regardless of the order callers are granted the lock. |
| */ |
| static void wait_sb_inodes(struct super_block *sb) |
| { |
| LIST_HEAD(sync_list); |
| |
| /* |
| * We need to be protected against the filesystem going from |
| * r/o to r/w or vice versa. |
| */ |
| WARN_ON(!rwsem_is_locked(&sb->s_umount)); |
| |
| mutex_lock(&sb->s_sync_lock); |
| |
| /* |
| * Splice the writeback list onto a temporary list to avoid waiting on |
| * inodes that have started writeback after this point. |
| * |
| * Use rcu_read_lock() to keep the inodes around until we have a |
| * reference. s_inode_wblist_lock protects sb->s_inodes_wb as well as |
| * the local list because inodes can be dropped from either by writeback |
| * completion. |
| */ |
| rcu_read_lock(); |
| spin_lock_irq(&sb->s_inode_wblist_lock); |
| list_splice_init(&sb->s_inodes_wb, &sync_list); |
| |
| /* |
| * Data integrity sync. Must wait for all pages under writeback, because |
| * there may have been pages dirtied before our sync call, but which had |
| * writeout started before we write it out. In which case, the inode |
| * may not be on the dirty list, but we still have to wait for that |
| * writeout. |
| */ |
| while (!list_empty(&sync_list)) { |
| struct inode *inode = list_first_entry(&sync_list, struct inode, |
| i_wb_list); |
| struct address_space *mapping = inode->i_mapping; |
| |
| /* |
| * Move each inode back to the wb list before we drop the lock |
| * to preserve consistency between i_wb_list and the mapping |
| * writeback tag. Writeback completion is responsible to remove |
| * the inode from either list once the writeback tag is cleared. |
| */ |
| list_move_tail(&inode->i_wb_list, &sb->s_inodes_wb); |
| |
| /* |
| * The mapping can appear untagged while still on-list since we |
| * do not have the mapping lock. Skip it here, wb completion |
| * will remove it. |
| */ |
| if (!mapping_tagged(mapping, PAGECACHE_TAG_WRITEBACK)) |
| continue; |
| |
| spin_unlock_irq(&sb->s_inode_wblist_lock); |
| |
| spin_lock(&inode->i_lock); |
| if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { |
| spin_unlock(&inode->i_lock); |
| |
| spin_lock_irq(&sb->s_inode_wblist_lock); |
| continue; |
| } |
| __iget(inode); |
| spin_unlock(&inode->i_lock); |
| rcu_read_unlock(); |
| |
| /* |
| * We keep the error status of individual mapping so that |
| * applications can catch the writeback error using fsync(2). |
| * See filemap_fdatawait_keep_errors() for details. |
| */ |
| filemap_fdatawait_keep_errors(mapping); |
| |
| cond_resched(); |
| |
| iput(inode); |
| |
| rcu_read_lock(); |
| spin_lock_irq(&sb->s_inode_wblist_lock); |
| } |
| spin_unlock_irq(&sb->s_inode_wblist_lock); |
| rcu_read_unlock(); |
| mutex_unlock(&sb->s_sync_lock); |
| } |
| |
| static void __writeback_inodes_sb_nr(struct super_block *sb, unsigned long nr, |
| enum wb_reason reason, bool skip_if_busy) |
| { |
| DEFINE_WB_COMPLETION_ONSTACK(done); |
| struct wb_writeback_work work = { |
| .sb = sb, |
| .sync_mode = WB_SYNC_NONE, |
| .tagged_writepages = 1, |
| .done = &done, |
| .nr_pages = nr, |
| .reason = reason, |
| }; |
| struct backing_dev_info *bdi = sb->s_bdi; |
| |
| if (!bdi_has_dirty_io(bdi) || bdi == &noop_backing_dev_info) |
| return; |
| WARN_ON(!rwsem_is_locked(&sb->s_umount)); |
| |
| bdi_split_work_to_wbs(sb->s_bdi, &work, skip_if_busy); |
| wb_wait_for_completion(bdi, &done); |
| } |
| |
| /** |
| * writeback_inodes_sb_nr - writeback dirty inodes from given super_block |
| * @sb: the superblock |
| * @nr: the number of pages to write |
| * @reason: reason why some writeback work initiated |
| * |
| * Start writeback on some inodes on this super_block. No guarantees are made |
| * on how many (if any) will be written, and this function does not wait |
| * for IO completion of submitted IO. |
| */ |
| void writeback_inodes_sb_nr(struct super_block *sb, |
| unsigned long nr, |
| enum wb_reason reason) |
| { |
| __writeback_inodes_sb_nr(sb, nr, reason, false); |
| } |
| EXPORT_SYMBOL(writeback_inodes_sb_nr); |
| |
| /** |
| * writeback_inodes_sb - writeback dirty inodes from given super_block |
| * @sb: the superblock |
| * @reason: reason why some writeback work was initiated |
| * |
| * Start writeback on some inodes on this super_block. No guarantees are made |
| * on how many (if any) will be written, and this function does not wait |
| * for IO completion of submitted IO. |
| */ |
| void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason) |
| { |
| return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason); |
| } |
| EXPORT_SYMBOL(writeback_inodes_sb); |
| |
| /** |
| * try_to_writeback_inodes_sb_nr - try to start writeback if none underway |
| * @sb: the superblock |
| * @nr: the number of pages to write |
| * @reason: the reason of writeback |
| * |
| * Invoke writeback_inodes_sb_nr if no writeback is currently underway. |
| * Returns 1 if writeback was started, 0 if not. |
| */ |
| bool try_to_writeback_inodes_sb_nr(struct super_block *sb, unsigned long nr, |
| enum wb_reason reason) |
| { |
| if (!down_read_trylock(&sb->s_umount)) |
| return false; |
| |
| __writeback_inodes_sb_nr(sb, nr, reason, true); |
| up_read(&sb->s_umount); |
| return true; |
| } |
| EXPORT_SYMBOL(try_to_writeback_inodes_sb_nr); |
| |
| /** |
| * try_to_writeback_inodes_sb - try to start writeback if none underway |
| * @sb: the superblock |
| * @reason: reason why some writeback work was initiated |
| * |
| * Implement by try_to_writeback_inodes_sb_nr() |
| * Returns 1 if writeback was started, 0 if not. |
| */ |
| bool try_to_writeback_inodes_sb(struct super_block *sb, enum wb_reason reason) |
| { |
| return try_to_writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason); |
| } |
| EXPORT_SYMBOL(try_to_writeback_inodes_sb); |
| |
| /** |
| * sync_inodes_sb - sync sb inode pages |
| * @sb: the superblock |
| * |
| * This function writes and waits on any dirty inode belonging to this |
| * super_block. |
| */ |
| void sync_inodes_sb(struct super_block *sb) |
| { |
| DEFINE_WB_COMPLETION_ONSTACK(done); |
| struct wb_writeback_work work = { |
| .sb = sb, |
| .sync_mode = WB_SYNC_ALL, |
| .nr_pages = LONG_MAX, |
| .range_cyclic = 0, |
| .done = &done, |
| .reason = WB_REASON_SYNC, |
| .for_sync = 1, |
| }; |
| struct backing_dev_info *bdi = sb->s_bdi; |
| |
| /* |
| * Can't skip on !bdi_has_dirty() because we should wait for !dirty |
| * inodes under writeback and I_DIRTY_TIME inodes ignored by |
| * bdi_has_dirty() need to be written out too. |
| */ |
| if (bdi == &noop_backing_dev_info) |
| return; |
| WARN_ON(!rwsem_is_locked(&sb->s_umount)); |
| |
| bdi_split_work_to_wbs(bdi, &work, false); |
| wb_wait_for_completion(bdi, &done); |
| |
| wait_sb_inodes(sb); |
| } |
| EXPORT_SYMBOL(sync_inodes_sb); |
| |
| /** |
| * write_inode_now - write an inode to disk |
| * @inode: inode to write to disk |
| * @sync: whether the write should be synchronous or not |
| * |
| * This function commits an inode to disk immediately if it is dirty. This is |
| * primarily needed by knfsd. |
| * |
| * The caller must either have a ref on the inode or must have set I_WILL_FREE. |
| */ |
| int write_inode_now(struct inode *inode, int sync) |
| { |
| struct writeback_control wbc = { |
| .nr_to_write = LONG_MAX, |
| .sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE, |
| .range_start = 0, |
| .range_end = LLONG_MAX, |
| }; |
| |
| if (!mapping_cap_writeback_dirty(inode->i_mapping)) |
| wbc.nr_to_write = 0; |
| |
| might_sleep(); |
| return writeback_single_inode(inode, &wbc); |
| } |
| EXPORT_SYMBOL(write_inode_now); |
| |
| /** |
| * sync_inode - write an inode and its pages to disk. |
| * @inode: the inode to sync |
| * @wbc: controls the writeback mode |
| * |
| * sync_inode() will write an inode and its pages to disk. It will also |
| * correctly update the inode on its superblock's dirty inode lists and will |
| * update inode->i_state. |
| * |
| * The caller must have a ref on the inode. |
| */ |
| int sync_inode(struct inode *inode, struct writeback_control *wbc) |
| { |
| return writeback_single_inode(inode, wbc); |
| } |
| EXPORT_SYMBOL(sync_inode); |
| |
| /** |
| * sync_inode_metadata - write an inode to disk |
| * @inode: the inode to sync |
| * @wait: wait for I/O to complete. |
| * |
| * Write an inode to disk and adjust its dirty state after completion. |
| * |
| * Note: only writes the actual inode, no associated data or other metadata. |
| */ |
| int sync_inode_metadata(struct inode *inode, int wait) |
| { |
| struct writeback_control wbc = { |
| .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE, |
| .nr_to_write = 0, /* metadata-only */ |
| }; |
| |
| return sync_inode(inode, &wbc); |
| } |
| EXPORT_SYMBOL(sync_inode_metadata); |