| /* | 
 |  * SAMSUNG S5P USB HOST EHCI Controller | 
 |  * | 
 |  * Copyright (C) 2011 Samsung Electronics Co.Ltd | 
 |  * Author: Jingoo Han <jg1.han@samsung.com> | 
 |  * Author: Joonyoung Shim <jy0922.shim@samsung.com> | 
 |  * | 
 |  * This program is free software; you can redistribute  it and/or modify it | 
 |  * under  the terms of  the GNU General  Public License as published by the | 
 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  * option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/platform_device.h> | 
 | #include <plat/ehci.h> | 
 | #include <plat/usb-phy.h> | 
 |  | 
 | struct s5p_ehci_hcd { | 
 | 	struct device *dev; | 
 | 	struct usb_hcd *hcd; | 
 | 	struct clk *clk; | 
 | }; | 
 |  | 
 | static const struct hc_driver s5p_ehci_hc_driver = { | 
 | 	.description		= hcd_name, | 
 | 	.product_desc		= "S5P EHCI Host Controller", | 
 | 	.hcd_priv_size		= sizeof(struct ehci_hcd), | 
 |  | 
 | 	.irq			= ehci_irq, | 
 | 	.flags			= HCD_MEMORY | HCD_USB2, | 
 |  | 
 | 	.reset			= ehci_init, | 
 | 	.start			= ehci_run, | 
 | 	.stop			= ehci_stop, | 
 | 	.shutdown		= ehci_shutdown, | 
 |  | 
 | 	.get_frame_number	= ehci_get_frame, | 
 |  | 
 | 	.urb_enqueue		= ehci_urb_enqueue, | 
 | 	.urb_dequeue		= ehci_urb_dequeue, | 
 | 	.endpoint_disable	= ehci_endpoint_disable, | 
 | 	.endpoint_reset		= ehci_endpoint_reset, | 
 |  | 
 | 	.hub_status_data	= ehci_hub_status_data, | 
 | 	.hub_control		= ehci_hub_control, | 
 | 	.bus_suspend		= ehci_bus_suspend, | 
 | 	.bus_resume		= ehci_bus_resume, | 
 |  | 
 | 	.relinquish_port	= ehci_relinquish_port, | 
 | 	.port_handed_over	= ehci_port_handed_over, | 
 |  | 
 | 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete, | 
 | }; | 
 |  | 
 | static int __devinit s5p_ehci_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct s5p_ehci_platdata *pdata; | 
 | 	struct s5p_ehci_hcd *s5p_ehci; | 
 | 	struct usb_hcd *hcd; | 
 | 	struct ehci_hcd *ehci; | 
 | 	struct resource *res; | 
 | 	int irq; | 
 | 	int err; | 
 |  | 
 | 	pdata = pdev->dev.platform_data; | 
 | 	if (!pdata) { | 
 | 		dev_err(&pdev->dev, "No platform data defined\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	s5p_ehci = kzalloc(sizeof(struct s5p_ehci_hcd), GFP_KERNEL); | 
 | 	if (!s5p_ehci) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	s5p_ehci->dev = &pdev->dev; | 
 |  | 
 | 	hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev, | 
 | 					dev_name(&pdev->dev)); | 
 | 	if (!hcd) { | 
 | 		dev_err(&pdev->dev, "Unable to create HCD\n"); | 
 | 		err = -ENOMEM; | 
 | 		goto fail_hcd; | 
 | 	} | 
 |  | 
 | 	s5p_ehci->hcd = hcd; | 
 | 	s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); | 
 |  | 
 | 	if (IS_ERR(s5p_ehci->clk)) { | 
 | 		dev_err(&pdev->dev, "Failed to get usbhost clock\n"); | 
 | 		err = PTR_ERR(s5p_ehci->clk); | 
 | 		goto fail_clk; | 
 | 	} | 
 |  | 
 | 	err = clk_enable(s5p_ehci->clk); | 
 | 	if (err) | 
 | 		goto fail_clken; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		dev_err(&pdev->dev, "Failed to get I/O memory\n"); | 
 | 		err = -ENXIO; | 
 | 		goto fail_io; | 
 | 	} | 
 |  | 
 | 	hcd->rsrc_start = res->start; | 
 | 	hcd->rsrc_len = resource_size(res); | 
 | 	hcd->regs = ioremap(res->start, resource_size(res)); | 
 | 	if (!hcd->regs) { | 
 | 		dev_err(&pdev->dev, "Failed to remap I/O memory\n"); | 
 | 		err = -ENOMEM; | 
 | 		goto fail_io; | 
 | 	} | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (!irq) { | 
 | 		dev_err(&pdev->dev, "Failed to get IRQ\n"); | 
 | 		err = -ENODEV; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	if (pdata->phy_init) | 
 | 		pdata->phy_init(pdev, S5P_USB_PHY_HOST); | 
 |  | 
 | 	ehci = hcd_to_ehci(hcd); | 
 | 	ehci->caps = hcd->regs; | 
 | 	ehci->regs = hcd->regs + | 
 | 		HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); | 
 |  | 
 | 	dbg_hcs_params(ehci, "reset"); | 
 | 	dbg_hcc_params(ehci, "reset"); | 
 |  | 
 | 	/* cache this readonly data; minimize chip reads */ | 
 | 	ehci->hcs_params = readl(&ehci->caps->hcs_params); | 
 |  | 
 | 	ehci_reset(ehci); | 
 |  | 
 | 	err = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Failed to add USB HCD\n"); | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, s5p_ehci); | 
 |  | 
 | 	return 0; | 
 |  | 
 | fail: | 
 | 	iounmap(hcd->regs); | 
 | fail_io: | 
 | 	clk_disable(s5p_ehci->clk); | 
 | fail_clken: | 
 | 	clk_put(s5p_ehci->clk); | 
 | fail_clk: | 
 | 	usb_put_hcd(hcd); | 
 | fail_hcd: | 
 | 	kfree(s5p_ehci); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __devexit s5p_ehci_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; | 
 | 	struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); | 
 | 	struct usb_hcd *hcd = s5p_ehci->hcd; | 
 |  | 
 | 	usb_remove_hcd(hcd); | 
 |  | 
 | 	if (pdata && pdata->phy_exit) | 
 | 		pdata->phy_exit(pdev, S5P_USB_PHY_HOST); | 
 |  | 
 | 	iounmap(hcd->regs); | 
 |  | 
 | 	clk_disable(s5p_ehci->clk); | 
 | 	clk_put(s5p_ehci->clk); | 
 |  | 
 | 	usb_put_hcd(hcd); | 
 | 	kfree(s5p_ehci); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void s5p_ehci_shutdown(struct platform_device *pdev) | 
 | { | 
 | 	struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); | 
 | 	struct usb_hcd *hcd = s5p_ehci->hcd; | 
 |  | 
 | 	if (hcd->driver->shutdown) | 
 | 		hcd->driver->shutdown(hcd); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int s5p_ehci_suspend(struct device *dev) | 
 | { | 
 | 	struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); | 
 | 	struct usb_hcd *hcd = s5p_ehci->hcd; | 
 | 	struct ehci_hcd *ehci = hcd_to_ehci(hcd); | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; | 
 | 	unsigned long flags; | 
 | 	int rc = 0; | 
 |  | 
 | 	if (time_before(jiffies, ehci->next_statechange)) | 
 | 		msleep(20); | 
 |  | 
 | 	/* | 
 | 	 * Root hub was already suspended. Disable irq emission and | 
 | 	 * mark HW unaccessible.  The PM and USB cores make sure that | 
 | 	 * the root hub is either suspended or stopped. | 
 | 	 */ | 
 | 	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); | 
 | 	spin_lock_irqsave(&ehci->lock, flags); | 
 | 	ehci_writel(ehci, 0, &ehci->regs->intr_enable); | 
 | 	(void)ehci_readl(ehci, &ehci->regs->intr_enable); | 
 |  | 
 | 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | 
 | 	spin_unlock_irqrestore(&ehci->lock, flags); | 
 |  | 
 | 	if (pdata && pdata->phy_exit) | 
 | 		pdata->phy_exit(pdev, S5P_USB_PHY_HOST); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int s5p_ehci_resume(struct device *dev) | 
 | { | 
 | 	struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); | 
 | 	struct usb_hcd *hcd = s5p_ehci->hcd; | 
 | 	struct ehci_hcd *ehci = hcd_to_ehci(hcd); | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; | 
 |  | 
 | 	if (pdata && pdata->phy_init) | 
 | 		pdata->phy_init(pdev, S5P_USB_PHY_HOST); | 
 |  | 
 | 	if (time_before(jiffies, ehci->next_statechange)) | 
 | 		msleep(100); | 
 |  | 
 | 	/* Mark hardware accessible again as we are out of D3 state by now */ | 
 | 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | 
 |  | 
 | 	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { | 
 | 		int	mask = INTR_MASK; | 
 |  | 
 | 		ehci_prepare_ports_for_controller_resume(ehci); | 
 | 		if (!hcd->self.root_hub->do_remote_wakeup) | 
 | 			mask &= ~STS_PCD; | 
 | 		ehci_writel(ehci, mask, &ehci->regs->intr_enable); | 
 | 		ehci_readl(ehci, &ehci->regs->intr_enable); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	usb_root_hub_lost_power(hcd->self.root_hub); | 
 |  | 
 | 	(void) ehci_halt(ehci); | 
 | 	(void) ehci_reset(ehci); | 
 |  | 
 | 	/* emptying the schedule aborts any urbs */ | 
 | 	spin_lock_irq(&ehci->lock); | 
 | 	if (ehci->reclaim) | 
 | 		end_unlink_async(ehci); | 
 | 	ehci_work(ehci); | 
 | 	spin_unlock_irq(&ehci->lock); | 
 |  | 
 | 	ehci_writel(ehci, ehci->command, &ehci->regs->command); | 
 | 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); | 
 | 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */ | 
 |  | 
 | 	/* here we "know" root ports should always stay powered */ | 
 | 	ehci_port_power(ehci, 1); | 
 |  | 
 | 	ehci->rh_state = EHCI_RH_SUSPENDED; | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define s5p_ehci_suspend	NULL | 
 | #define s5p_ehci_resume		NULL | 
 | #endif | 
 |  | 
 | static const struct dev_pm_ops s5p_ehci_pm_ops = { | 
 | 	.suspend	= s5p_ehci_suspend, | 
 | 	.resume		= s5p_ehci_resume, | 
 | }; | 
 |  | 
 | static struct platform_driver s5p_ehci_driver = { | 
 | 	.probe		= s5p_ehci_probe, | 
 | 	.remove		= __devexit_p(s5p_ehci_remove), | 
 | 	.shutdown	= s5p_ehci_shutdown, | 
 | 	.driver = { | 
 | 		.name	= "s5p-ehci", | 
 | 		.owner	= THIS_MODULE, | 
 | 		.pm	= &s5p_ehci_pm_ops, | 
 | 	} | 
 | }; | 
 |  | 
 | MODULE_ALIAS("platform:s5p-ehci"); |