| /* | |
| * cpufreq driver for the cell processor | |
| * | |
| * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 | |
| * | |
| * Author: Christian Krafft <krafft@de.ibm.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/cpufreq.h> | |
| #include <linux/module.h> | |
| #include <linux/of_platform.h> | |
| #include <asm/machdep.h> | |
| #include <asm/prom.h> | |
| #include <asm/cell-regs.h> | |
| #include "ppc_cbe_cpufreq.h" | |
| /* the CBE supports an 8 step frequency scaling */ | |
| static struct cpufreq_frequency_table cbe_freqs[] = { | |
| {0, 1, 0}, | |
| {0, 2, 0}, | |
| {0, 3, 0}, | |
| {0, 4, 0}, | |
| {0, 5, 0}, | |
| {0, 6, 0}, | |
| {0, 8, 0}, | |
| {0, 10, 0}, | |
| {0, 0, CPUFREQ_TABLE_END}, | |
| }; | |
| /* | |
| * hardware specific functions | |
| */ | |
| static int set_pmode(unsigned int cpu, unsigned int slow_mode) | |
| { | |
| int rc; | |
| if (cbe_cpufreq_has_pmi) | |
| rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); | |
| else | |
| rc = cbe_cpufreq_set_pmode(cpu, slow_mode); | |
| pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); | |
| return rc; | |
| } | |
| /* | |
| * cpufreq functions | |
| */ | |
| static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) | |
| { | |
| struct cpufreq_frequency_table *pos; | |
| const u32 *max_freqp; | |
| u32 max_freq; | |
| int cur_pmode; | |
| struct device_node *cpu; | |
| cpu = of_get_cpu_node(policy->cpu, NULL); | |
| if (!cpu) | |
| return -ENODEV; | |
| pr_debug("init cpufreq on CPU %d\n", policy->cpu); | |
| /* | |
| * Let's check we can actually get to the CELL regs | |
| */ | |
| if (!cbe_get_cpu_pmd_regs(policy->cpu) || | |
| !cbe_get_cpu_mic_tm_regs(policy->cpu)) { | |
| pr_info("invalid CBE regs pointers for cpufreq\n"); | |
| return -EINVAL; | |
| } | |
| max_freqp = of_get_property(cpu, "clock-frequency", NULL); | |
| of_node_put(cpu); | |
| if (!max_freqp) | |
| return -EINVAL; | |
| /* we need the freq in kHz */ | |
| max_freq = *max_freqp / 1000; | |
| pr_debug("max clock-frequency is at %u kHz\n", max_freq); | |
| pr_debug("initializing frequency table\n"); | |
| /* initialize frequency table */ | |
| cpufreq_for_each_entry(pos, cbe_freqs) { | |
| pos->frequency = max_freq / pos->driver_data; | |
| pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency); | |
| } | |
| /* if DEBUG is enabled set_pmode() measures the latency | |
| * of a transition */ | |
| policy->cpuinfo.transition_latency = 25000; | |
| cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); | |
| pr_debug("current pmode is at %d\n",cur_pmode); | |
| policy->cur = cbe_freqs[cur_pmode].frequency; | |
| #ifdef CONFIG_SMP | |
| cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); | |
| #endif | |
| /* this ensures that policy->cpuinfo_min | |
| * and policy->cpuinfo_max are set correctly */ | |
| return cpufreq_table_validate_and_show(policy, cbe_freqs); | |
| } | |
| static int cbe_cpufreq_target(struct cpufreq_policy *policy, | |
| unsigned int cbe_pmode_new) | |
| { | |
| pr_debug("setting frequency for cpu %d to %d kHz, " \ | |
| "1/%d of max frequency\n", | |
| policy->cpu, | |
| cbe_freqs[cbe_pmode_new].frequency, | |
| cbe_freqs[cbe_pmode_new].driver_data); | |
| return set_pmode(policy->cpu, cbe_pmode_new); | |
| } | |
| static struct cpufreq_driver cbe_cpufreq_driver = { | |
| .verify = cpufreq_generic_frequency_table_verify, | |
| .target_index = cbe_cpufreq_target, | |
| .init = cbe_cpufreq_cpu_init, | |
| .name = "cbe-cpufreq", | |
| .flags = CPUFREQ_CONST_LOOPS, | |
| }; | |
| /* | |
| * module init and destoy | |
| */ | |
| static int __init cbe_cpufreq_init(void) | |
| { | |
| if (!machine_is(cell)) | |
| return -ENODEV; | |
| return cpufreq_register_driver(&cbe_cpufreq_driver); | |
| } | |
| static void __exit cbe_cpufreq_exit(void) | |
| { | |
| cpufreq_unregister_driver(&cbe_cpufreq_driver); | |
| } | |
| module_init(cbe_cpufreq_init); | |
| module_exit(cbe_cpufreq_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); |