| /* | |
| * Sonics Silicon Backplane | |
| * Broadcom EXTIF core driver | |
| * | |
| * Copyright 2005, Broadcom Corporation | |
| * Copyright 2006, 2007, Michael Buesch <m@bues.ch> | |
| * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org> | |
| * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net> | |
| * | |
| * Licensed under the GNU/GPL. See COPYING for details. | |
| */ | |
| #include <linux/serial.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/serial_reg.h> | |
| #include "ssb_private.h" | |
| static inline u32 extif_read32(struct ssb_extif *extif, u16 offset) | |
| { | |
| return ssb_read32(extif->dev, offset); | |
| } | |
| static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value) | |
| { | |
| ssb_write32(extif->dev, offset, value); | |
| } | |
| static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset, | |
| u32 mask, u32 value) | |
| { | |
| value &= mask; | |
| value |= extif_read32(extif, offset) & ~mask; | |
| extif_write32(extif, offset, value); | |
| return value; | |
| } | |
| #ifdef CONFIG_SSB_SERIAL | |
| static bool serial_exists(u8 *regs) | |
| { | |
| u8 save_mcr, msr = 0; | |
| if (regs) { | |
| save_mcr = regs[UART_MCR]; | |
| regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS); | |
| msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI | |
| | UART_MSR_CTS | UART_MSR_DSR); | |
| regs[UART_MCR] = save_mcr; | |
| } | |
| return (msr == (UART_MSR_DCD | UART_MSR_CTS)); | |
| } | |
| int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports) | |
| { | |
| u32 i, nr_ports = 0; | |
| /* Disable GPIO interrupt initially */ | |
| extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0); | |
| extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0); | |
| for (i = 0; i < 2; i++) { | |
| void __iomem *uart_regs; | |
| uart_regs = ioremap_nocache(SSB_EUART, 16); | |
| if (uart_regs) { | |
| uart_regs += (i * 8); | |
| if (serial_exists(uart_regs) && ports) { | |
| extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2); | |
| nr_ports++; | |
| ports[i].regs = uart_regs; | |
| ports[i].irq = 2; | |
| ports[i].baud_base = 13500000; | |
| ports[i].reg_shift = 0; | |
| } | |
| iounmap(uart_regs); | |
| } | |
| } | |
| return nr_ports; | |
| } | |
| #endif /* CONFIG_SSB_SERIAL */ | |
| void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) | |
| { | |
| u32 tmp; | |
| /* Initialize extif so we can get to the LEDs and external UART */ | |
| extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); | |
| /* Set timing for the flash */ | |
| tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; | |
| tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; | |
| tmp |= DIV_ROUND_UP(120, ns); | |
| extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); | |
| /* Set programmable interface timing for external uart */ | |
| tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; | |
| tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; | |
| tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; | |
| tmp |= DIV_ROUND_UP(120, ns); | |
| extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); | |
| } | |
| void ssb_extif_get_clockcontrol(struct ssb_extif *extif, | |
| u32 *pll_type, u32 *n, u32 *m) | |
| { | |
| *pll_type = SSB_PLLTYPE_1; | |
| *n = extif_read32(extif, SSB_EXTIF_CLOCK_N); | |
| *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB); | |
| } | |
| u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) | |
| { | |
| struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); | |
| return ssb_extif_watchdog_timer_set(extif, ticks); | |
| } | |
| u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) | |
| { | |
| struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); | |
| u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms; | |
| ticks = ssb_extif_watchdog_timer_set(extif, ticks); | |
| return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK; | |
| } | |
| u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) | |
| { | |
| if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER) | |
| ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER; | |
| extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks); | |
| return ticks; | |
| } | |
| void ssb_extif_init(struct ssb_extif *extif) | |
| { | |
| if (!extif->dev) | |
| return; /* We don't have a Extif core */ | |
| spin_lock_init(&extif->gpio_lock); | |
| } | |
| u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) | |
| { | |
| return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask; | |
| } | |
| u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) | |
| { | |
| unsigned long flags; | |
| u32 res = 0; | |
| spin_lock_irqsave(&extif->gpio_lock, flags); | |
| res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), | |
| mask, value); | |
| spin_unlock_irqrestore(&extif->gpio_lock, flags); | |
| return res; | |
| } | |
| u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) | |
| { | |
| unsigned long flags; | |
| u32 res = 0; | |
| spin_lock_irqsave(&extif->gpio_lock, flags); | |
| res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), | |
| mask, value); | |
| spin_unlock_irqrestore(&extif->gpio_lock, flags); | |
| return res; | |
| } | |
| u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value) | |
| { | |
| unsigned long flags; | |
| u32 res = 0; | |
| spin_lock_irqsave(&extif->gpio_lock, flags); | |
| res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); | |
| spin_unlock_irqrestore(&extif->gpio_lock, flags); | |
| return res; | |
| } | |
| u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value) | |
| { | |
| unsigned long flags; | |
| u32 res = 0; | |
| spin_lock_irqsave(&extif->gpio_lock, flags); | |
| res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); | |
| spin_unlock_irqrestore(&extif->gpio_lock, flags); | |
| return res; | |
| } |