| /* |
| * Freescale On-Chip OTP driver |
| * |
| * Copyright (C) 2010-2016 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright 2017 NXP |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kobject.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| |
| #define HW_OCOTP_CTRL 0x00000000 |
| #define HW_OCOTP_CTRL_SET 0x00000004 |
| #define BP_OCOTP_CTRL_WR_UNLOCK 16 |
| #define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000 |
| #define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00000400 |
| #define BM_OCOTP_CTRL_ERROR 0x00000200 |
| #define BM_OCOTP_CTRL_BUSY 0x00000100 |
| #define BP_OCOTP_CTRL_ADDR 0 |
| #define BM_OCOTP_CTRL_ADDR 0x0000007F |
| #define BM_OCOTP_CTRL_ADDR_MX7D 0x0000000F |
| #define BP_OCOTP_CTRL_ADDR_MX7ULP 0 |
| #define BM_OCOTP_CTRL_ADDR_MX7ULP 0x000000FF |
| |
| #define HW_OCOTP_TIMING 0x00000010 |
| #define BP_OCOTP_TIMING_STROBE_READ 16 |
| #define BM_OCOTP_TIMING_STROBE_READ 0x003F0000 |
| #define BP_OCOTP_TIMING_RELAX 12 |
| #define BM_OCOTP_TIMING_RELAX 0x0000F000 |
| #define BP_OCOTP_TIMING_STROBE_PROG 0 |
| #define BM_OCOTP_TIMING_STROBE_PROG 0x00000FFF |
| |
| #define BP_TIMING_FSOURCE 12 |
| #define BM_TIMING_FSOURCE 0x0007F000 |
| #define BV_TIMING_FSOURCE_NS 1001 |
| #define BP_TIMING_PROG 0 |
| #define BM_TIMING_PROG 0x00000FFF |
| #define BV_TIMING_PROG_US 10 |
| |
| #define HW_OCOTP_DATA 0x00000020 |
| |
| #define HW_OCOTP_DATA0_MX7D 0x00000020 |
| #define HW_OCOTP_DATA1_MX7D 0x00000030 |
| #define HW_OCOTP_DATA2_MX7D 0x00000040 |
| #define HW_OCOTP_DATA3_MX7D 0x00000050 |
| |
| #define HW_OCOTP_PDN_ULP 0x00000010 |
| #define HW_OCOTP_OUT_STATUS_ULP 0x00000090 |
| #define HW_OCOTP_OUT_STATUS_CLR_ULP 0x00000098 |
| |
| #define BM_OUT_STATUS_DED_RELOAD_ULP (1 << 20) |
| #define BM_OUT_STATUS_SEC_RELOAD_ULP (1 << 19) |
| #define BM_OUT_STATUS_PROGFAIL (1 << 12) |
| #define BM_OUT_STATUS_LOCKED (1 << 11) |
| #define BM_OUT_STATUS_DED_ULP (1 << 10) |
| |
| #define HW_OCOTP_CUST_N(n) (0x00000400 + (n) * 0x10) |
| #define BF(value, field) (((value) << BP_##field) & BM_##field) |
| |
| #define DEF_RELAX 20 /* > 16.5ns */ |
| |
| #define BANK8(a, b, c, d, e, f, g, h) { \ |
| "HW_OCOTP_"#a, "HW_OCOTP_"#b, "HW_OCOTP_"#c, "HW_OCOTP_"#d, \ |
| "HW_OCOTP_"#e, "HW_OCOTP_"#f, "HW_OCOTP_"#g, "HW_OCOTP_"#h, \ |
| } |
| |
| #define BANK4(a, b, c, d) { \ |
| "HW_OCOTP_"#a, "HW_OCOTP_"#b, "HW_OCOTP_"#c, "HW_OCOTP_"#d, \ |
| } |
| |
| static const char *imx6q_otp_desc[16][8] = { |
| BANK8(LOCK, CFG0, CFG1, CFG2, CFG3, CFG4, CFG5, CFG6), |
| BANK8(MEM0, MEM1, MEM2, MEM3, MEM4, ANA0, ANA1, ANA2), |
| BANK8(OTPMK0, OTPMK1, OTPMK2, OTPMK3, OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK8(SRK0, SRK1, SRK2, SRK3, SRK4, SRK5, SRK6, SRK7), |
| BANK8(RESP0, HSJC_RESP1, MAC0, MAC1, HDCP_KSV0, HDCP_KSV1, GP1, GP2), |
| BANK8(DTCP_KEY0, DTCP_KEY1, DTCP_KEY2, DTCP_KEY3, DTCP_KEY4, MISC_CONF, FIELD_RETURN, SRK_REVOKE), |
| BANK8(HDCP_KEY0, HDCP_KEY1, HDCP_KEY2, HDCP_KEY3, HDCP_KEY4, HDCP_KEY5, HDCP_KEY6, HDCP_KEY7), |
| BANK8(HDCP_KEY8, HDCP_KEY9, HDCP_KEY10, HDCP_KEY11, HDCP_KEY12, HDCP_KEY13, HDCP_KEY14, HDCP_KEY15), |
| BANK8(HDCP_KEY16, HDCP_KEY17, HDCP_KEY18, HDCP_KEY19, HDCP_KEY20, HDCP_KEY21, HDCP_KEY22, HDCP_KEY23), |
| BANK8(HDCP_KEY24, HDCP_KEY25, HDCP_KEY26, HDCP_KEY27, HDCP_KEY28, HDCP_KEY29, HDCP_KEY30, HDCP_KEY31), |
| BANK8(HDCP_KEY32, HDCP_KEY33, HDCP_KEY34, HDCP_KEY35, HDCP_KEY36, HDCP_KEY37, HDCP_KEY38, HDCP_KEY39), |
| BANK8(HDCP_KEY40, HDCP_KEY41, HDCP_KEY42, HDCP_KEY43, HDCP_KEY44, HDCP_KEY45, HDCP_KEY46, HDCP_KEY47), |
| BANK8(HDCP_KEY48, HDCP_KEY49, HDCP_KEY50, HDCP_KEY51, HDCP_KEY52, HDCP_KEY53, HDCP_KEY54, HDCP_KEY55), |
| BANK8(HDCP_KEY56, HDCP_KEY57, HDCP_KEY58, HDCP_KEY59, HDCP_KEY60, HDCP_KEY61, HDCP_KEY62, HDCP_KEY63), |
| BANK8(HDCP_KEY64, HDCP_KEY65, HDCP_KEY66, HDCP_KEY67, HDCP_KEY68, HDCP_KEY69, HDCP_KEY70, HDCP_KEY71), |
| BANK8(CRC0, CRC1, CRC2, CRC3, CRC4, CRC5, CRC6, CRC7), |
| }; |
| |
| static const char *imx6sl_otp_desc[][8] = { |
| BANK8(LOCK, CFG0, CFG1, CFG2, CFG3, CFG4, CFG5, CFG6), |
| BANK8(MEM0, MEM1, MEM2, MEM3, MEM4, ANA0, ANA1, ANA2), |
| BANK8(OTPMK0, OTPMK1, OTPMK2, OTPMK3, OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK8(SRK0, SRK1, SRK2, SRK3, SRK4, SRK5, SRK6, SRK7), |
| BANK8(SJC_RESP0, SJC_RESP1, MAC0, MAC1, CRC0, CRC1, GP1, GP2), |
| BANK8(SW_GP0, SW_GP1, SW_GP2, SW_GP3, SW_GP4, MISC_CONF, FIELD_RETURN, SRK_REVOKE), |
| BANK8(GP_LO0, GP_LO1, GP_LO2, GP_LO3, GP_LO4, GP_LO5, GP_LO6, GP_LO7), |
| BANK8(GP_HI0, GP_HI1, GP_HI2, GP_HI3, GP_HI4, GP_HI5, GP_HI6, GP_HI7), |
| }; |
| |
| static const char *imx6sll_otp_desc[][8] = { |
| BANK8(LOCK, CFG0, CFG1, CFG2, CFG3, CFG4, CFG5, CFG6), |
| BANK8(MEM0, MEM1, MEM2, MEM3, MEM4, ANA0, ANA1, USB), |
| BANK8(OTPMK0, OTPMK1, OTPMK2, OTPMK3, OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK8(SRK0, SRK1, SRK2, SRK3, SRK4, SRK5, SRK6, SRK7), |
| BANK8(SJC_RESP0, SJC_RESP1, MAC0, MAC1, MAC2, CRC0, GP1, GP2), |
| BANK8(SW_GP0, SW_GP1, SW_GP2, SW_GP3, SW_GP4, MISC_CONF, FIELD_RETURN, SRK_REVOKE), |
| BANK8(ROM_PATCH0, ROM_PATCH1, ROM_PATCH2, ROM_PATCH3, ROM_PATCH4, ROM_PATCH5, ROM_PATCH6, ROM_PATCH7), |
| BANK8(GP30, GP31, GP32, GP33, GP40, GP41, GP42, GP43), |
| }; |
| |
| static const char *imx6ul_otp_desc[][8] = { |
| BANK8(LOCK, CFG0, CFG1, CFG2, CFG3, CFG4, CFG5, CFG6), |
| BANK8(MEM0, MEM1, MEM2, MEM3, MEM4, ANA0, ANA1, ANA2), |
| BANK8(OTPMK0, OTPMK1, OTPMK2, OTPMK3, OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK8(SRK0, SRK1, SRK2, SRK3, SRK4, SRK5, SRK6, SRK7), |
| BANK8(SJC_RESP0, SJC_RESP1, MAC0, MAC1, MAC2, CRC, GP1, GP2), |
| BANK8(SW_GP0, SW_GP1, SW_GP2, SW_GP3, SW_GP4, MISC_CONF, FIELD_RETURN, SRK_REVOKE), |
| BANK8(ROM_PATCH0, ROM_PATCH1, ROM_PATCH2, ROM_PATCH3, ROM_PATCH4, ROM_PATCH5, ROM_PATCH6, ROM_PATCH7), |
| BANK8(ROM_PATCH8, ROM_PATCH9, ROM_PATCH10, ROM_PATCH11, ROM_PATCH12, ROM_PATCH13, ROM_PATCH14, ROM_PATCH15), |
| BANK8(GP30, GP31, GP32, GP33, GP34, GP35, GP36, GP37), |
| BANK8(GP38, GP39, GP310, GP311, GP312, GP313, GP314, GP315), |
| BANK8(GP40, GP41, GP42, GP43, GP44, GP45, GP46, GP47), |
| BANK8(GP48, GP49, GP410, GP411, GP412, GP413, GP414, GP415), |
| BANK8(GP50, GP51, GP52, GP53, GP54, GP55, GP56, GP57), |
| BANK8(GP58, GP59, GP510, GP511, GP512, GP513, GP514, GP515), |
| BANK8(GP60, GP61, GP62, GP63, GP64, GP65, GP66, GP67), |
| BANK8(GP70, GP71, GP72, GP73, GP80, GP81, GP82, GP83), |
| }; |
| |
| static const char *imx6ull_otp_desc[][8] = { |
| BANK8(LOCK, CFG0, CFG1, CFG2, CFG3, CFG4, CFG5, CFG6), |
| BANK8(MEM0, MEM1, MEM2, MEM3, MEM4, ANA0, ANA1, ANA2), |
| BANK8(OTPMK0, OTPMK1, OTPMK2, OTPMK3, OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK8(SRK0, SRK1, SRK2, SRK3, SRK4, SRK5, SRK6, SRK7), |
| BANK8(SJC_RESP0, SJC_RESP1, MAC0, MAC1, MAC2, CRC, GP1, GP2), |
| BANK8(SW_GP0, SW_GP1, SW_GP2, SW_GP3, SW_GP4, MISC_CONF, FIELD_RETURN, SRK_REVOKE), |
| BANK8(ROM_PATCH0, ROM_PATCH1, ROM_PATCH2, ROM_PATCH3, ROM_PATCH4, ROM_PATCH5, ROM_PATCH6, ROM_PATCH7), |
| BANK8(GP30, GP31, GP32, GP33, GP40, GP41, GP42, GP43), |
| }; |
| |
| static const char *imx7d_otp_desc[][4] = { |
| BANK4(LOCK, TESTER0, TESTER1, TESTER2), |
| BANK4(TESTER3, TESTER4, TESTER5, BOOT_CFG0), |
| BANK4(BOOT_CFG1, BOOT_CFG2, BOOT_CFG3, BOOT_CFG4), |
| BANK4(MEM_TRIM0, MEM_TRIM1, ANA0, ANA1), |
| BANK4(OTPMK0, OTPMK1, OTPMK2, OTPMK3), |
| BANK4(OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK4(SRK0, SRK1, SRK2, SRK3), |
| BANK4(SRK4, SRK5, SRK6, SRK7), |
| BANK4(SJC_RESP0, SJC_RESP1, USB_ID, FIELD_RETURN), |
| BANK4(MAC_ADDR0, MAC_ADDR1, MAC_ADDR2, SRK_REVOKE), |
| BANK4(MAU_KEY0, MAU_KEY1, MAU_KEY2, MAU_KEY3), |
| BANK4(MAU_KEY4, MAU_KEY5, MAU_KEY6, MAU_KEY7), |
| BANK4(ROM_PATCH0, ROM_PATCH1, ROM_PATCH2, ROM_PATCH3), |
| BANK4(ROM_PATCH4, ROM_PATCH5, ROM_PATCH6, ROM_PATCH7), |
| BANK4(GP10, GP11, GP20, GP21), |
| BANK4(CRC_GP10, CRC_GP11, CRC_GP20, CRC_GP21), |
| }; |
| |
| static const char *imx7ulp_otp_desc[][8] = { |
| BANK8(TESTER0, TESTER1, TESTER2, TESTER3, TESTER4, TESTER5, TESTER6, TESTER7), |
| BANK8(LOCK0, LOCK1, LOCK2, CFG0, CFG1, CFG2, CFG3, CFG4), |
| BANK8(BOOT0, BOOT1, BOOT2, BOOT3, BOOT4, BOOT5, BOOT6, BOOT7), |
| BANK8(MEM0, MEM1, MEM2, MEM3, ANA0, ANA1, ANA2, ANA3), |
| BANK8(OTPMK0, OTPMK1, OTPMK2, OTPMK3, OTPMK4, OTPMK5, OTPMK6, OTPMK7), |
| BANK8(A7_SRK0, A7_SRK1, A7_SRK2, A7_SRK3, A7_SRK4, A7_SRK5, A7_SRK6, A7_SRK7), |
| BANK8(M4_SRK0, M4_SRK1, M4_SRK2, M4_SRK3, M4_SRK4, M4_SRK5, M4_SRK6, M4_SRK7), |
| BANK8(SJC_RESP0, SJC_RESP1, GP0, GP1, GP2, GP3, GP4, GP5), |
| BANK8(MAU_KEY0, MAU_KEY1, MAU_KEY2, MAU_KEY3, MAU_KEY4, MAU_KEY5, MAU_KEY6, MAU_KEY7), |
| BANK8(TESTER10, TESTER11, TESTER12, TESTER13, TESTER14, TESTER15, FIELD_RETURN, SRK_REVOKE), |
| BANK8(PMU0, PMU1, PMU2, PMU3, PMU4, PMU5, PMU6, PMU7), |
| BANK8(A7_PATCH0, A7_PATCH1, A7_PATCH2, A7_PATCH3, A7_PATCH4, A7_PATCH5, A7_PATCH6, A7_PATCH7), |
| BANK8(A7_PATCH10, A7_PATCH11, A7_PATCH12, A7_PATCH13, A7_PATCH14, A7_PATCH15, A7_PATCH16, A7_PATCH17), |
| BANK8(A7_PATCH20, A7_PATCH21, A7_PATCH22, A7_PATCH23, A7_PATCH24, A7_PATCH25, A7_PATCH26, A7_PATCH27), |
| BANK8(A7_PATCH30, A7_PATCH31, A7_PATCH32, A7_PATCH33, A7_PATCH34, A7_PATCH35, A7_PATCH36, A7_PATCH37), |
| BANK8(GP10, GP11, GP12, GP13, GP14, GP15, GP16, GP17), |
| BANK8(GP20, GP21, GP22, GP23, GP24, GP25, GP26, GP27), |
| BANK8(GP30, GP31, GP32, GP33, GP34, GP35, GP36, GP37), |
| BANK8(GP40, GP41, GP42, GP43, GP44, GP45, GP46, GP47), |
| BANK8(GP50, GP51, GP52, GP53, GP54, GP55, GP56, GP57), |
| BANK8(M4_PATCH0, M4_PATCH1, M4_PATCH2, M4_PATCH3, M4_PATCH4, M4_PATCH5, M4_PATCH6, M4_PATCH7), |
| BANK8(M4_PATCH10, M4_PATCH11, M4_PATCH12, M4_PATCH13, M4_PATCH14, M4_PATCH15, M4_PATCH16, M4_PATCH17), |
| BANK8(M4_PATCH20, M4_PATCH21, M4_PATCH22, M4_PATCH23, M4_PATCH24, M4_PATCH25, M4_PATCH26, M4_PATCH27), |
| BANK8(M4_PATCH30, M4_PATCH31, M4_PATCH32, M4_PATCH33, M4_PATCH34, M4_PATCH35, M4_PATCH36, M4_PATCH37), |
| BANK8(GP60, GP61, GP62, GP63, GP64, GP65, GP66, GP67), |
| BANK8(GP70, GP71, GP72, GP73, GP74, GP75, GP76, GP77), |
| BANK8(GP80, GP81, GP82, GP83, GP84, GP85, GP86, GP87), |
| BANK8(GP90, GP91, GP92, GP93, GP94, GP95, GP96, GP97), |
| BANK8(TRIM0, TRIM1, TRIM2, TRIM3, TRIM4, TRIM5, TRIM6, TRIM7), |
| BANK8(OTFAD_KEY0, OTFAD_KEY1, OTFAD_KEY2, OTFAD_KEY3, OTFAD_CFG0, OTFAD_CFG1, OTFAD_CFG2, OTFAD_CFG3), |
| BANK8(CRC0, CRC1, CRC2, CRC3, CRC4, CRC5, CRC6, CRC7), |
| }; |
| |
| static DEFINE_MUTEX(otp_mutex); |
| static void __iomem *otp_base; |
| static struct clk *otp_clk; |
| struct kobject *otp_kobj; |
| struct kobj_attribute *otp_kattr; |
| struct attribute_group *otp_attr_group; |
| |
| enum fsl_otp_devtype { |
| FSL_OTP_MX6Q, |
| FSL_OTP_MX6DL, |
| FSL_OTP_MX6SX, |
| FSL_OTP_MX6SL, |
| FSL_OTP_MX6SLL, |
| FSL_OTP_MX6UL, |
| FSL_OTP_MX6ULL, |
| FSL_OTP_MX7D, |
| FSL_OTP_MX7ULP, |
| }; |
| |
| struct fsl_otp_devtype_data { |
| enum fsl_otp_devtype devtype; |
| const char **bank_desc; |
| int fuse_nums; |
| void (*set_otp_timing)(void); |
| }; |
| |
| static struct fsl_otp_devtype_data *fsl_otp; |
| |
| /* |
| * fsl_otp_bank_physical and fsl_otp_word_physical are used to |
| * find the physical index of the word. Only used for calculating |
| * offset of the word, means only effective when reading fuse. |
| * Do not use the two functions for prog fuse. Always use the word |
| * index from fuse map to prog the fuse. |
| * |
| * Take i.MX6UL for example: |
| * there are holes between bank 5 and bank 6. The hole is 0x100 bytes. |
| * To bank 15, word 7, the word index is 15 * 8 + 7. The physical word |
| * index is 15 * 8 + 0x100 / 0x10 + 7, 0x100 contains 16 words. |
| * So use 15 * 8 + 7 to prog the fuse. And when reading, account the hole |
| * using offset 0x400 + (15 * 8 + 0x100 / 0x10 + 7) * 0x10. |
| * |
| * There is a hole in shadow registers address map of size 0x100 |
| * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. |
| * Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, |
| * account for this hole in address space. |
| * |
| * Similar hole exists between bank 14 and bank 15 of size 0x80 |
| * on iMX6QP, iMX6DQ, iMX6SDL, i.MX6SLL and iMX6SX. |
| * Note: iMX6SL has only 0-7 banks and there is no hole. |
| * Note: iMX6UL doesn't have this one. |
| * |
| * To i.MX6SLL, there are 9 banks. bank 7 and bank8 only contain 4 words |
| * each. Other banks contains 8 words. |
| */ |
| static u32 fsl_otp_bank_physical(struct fsl_otp_devtype_data *d, int bank) |
| { |
| u32 phy_bank; |
| |
| if ((bank == 0) || (d->devtype == FSL_OTP_MX6SL) || |
| (d->devtype == FSL_OTP_MX7D) || (d->devtype == FSL_OTP_MX7ULP)) |
| phy_bank = bank; |
| else if ((d->devtype == FSL_OTP_MX6UL) || |
| (d->devtype == FSL_OTP_MX6ULL) || |
| (d->devtype == FSL_OTP_MX6SLL)) { |
| if (bank >= 6) |
| phy_bank = fsl_otp_bank_physical(d, 5) + bank - 3; |
| else |
| phy_bank = bank; |
| } else { |
| if (bank >= 15) |
| phy_bank = fsl_otp_bank_physical(d, 14) + bank - 13; |
| else if (bank >= 6) |
| phy_bank = fsl_otp_bank_physical(d, 5) + bank - 3; |
| else |
| phy_bank = bank; |
| } |
| |
| return phy_bank; |
| } |
| |
| static u32 fsl_otp_word_physical(struct fsl_otp_devtype_data *d, int index) |
| { |
| u32 phy_bank_off; |
| u32 word_off, bank_off; |
| u32 words_per_bank; |
| |
| if (d->devtype == FSL_OTP_MX7D) |
| words_per_bank = 4; |
| else |
| words_per_bank = 8; |
| |
| bank_off = index / words_per_bank; |
| word_off = index % words_per_bank; |
| phy_bank_off = fsl_otp_bank_physical(d, bank_off); |
| |
| return phy_bank_off * words_per_bank + word_off; |
| } |
| |
| static void imx6_set_otp_timing(void) |
| { |
| unsigned long clk_rate = 0; |
| unsigned long strobe_read, relex, strobe_prog; |
| u32 timing = 0; |
| |
| clk_rate = clk_get_rate(otp_clk); |
| |
| /* do optimization for too many zeros */ |
| relex = clk_rate / (1000000000 / DEF_RELAX) - 1; |
| strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1; |
| strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1; |
| |
| timing = BF(relex, OCOTP_TIMING_RELAX); |
| timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ); |
| timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG); |
| |
| __raw_writel(timing, otp_base + HW_OCOTP_TIMING); |
| } |
| |
| static void imx7_set_otp_timing(void) |
| { |
| unsigned long clk_rate; |
| u32 fsource, prog; |
| u32 timing = 0; |
| u32 reg; |
| |
| clk_rate = clk_get_rate(otp_clk); |
| |
| fsource = DIV_ROUND_UP((clk_rate / 1000) * BV_TIMING_FSOURCE_NS, |
| 1000000) + 1; |
| prog = DIV_ROUND_CLOSEST(clk_rate * BV_TIMING_PROG_US, 1000000) + 1; |
| timing = BF(fsource, TIMING_FSOURCE) | BF(prog, TIMING_PROG); |
| reg = __raw_readl(otp_base + HW_OCOTP_TIMING); |
| reg &= ~(BM_TIMING_FSOURCE | BM_TIMING_PROG); |
| reg |= timing; |
| __raw_writel(reg, otp_base + HW_OCOTP_TIMING); |
| } |
| |
| static void imx7ulp_set_otp_timing(void) |
| { |
| /* No need to setup timing for ULP */ |
| } |
| |
| static struct fsl_otp_devtype_data imx6q_data = { |
| .devtype = FSL_OTP_MX6Q, |
| .bank_desc = (const char **)imx6q_otp_desc, |
| .fuse_nums = 16 * 8, |
| .set_otp_timing = imx6_set_otp_timing, |
| }; |
| |
| static struct fsl_otp_devtype_data imx6sl_data = { |
| .devtype = FSL_OTP_MX6SL, |
| .bank_desc = (const char **)imx6sl_otp_desc, |
| .fuse_nums = 8 * 8, |
| .set_otp_timing = imx6_set_otp_timing, |
| }; |
| |
| static struct fsl_otp_devtype_data imx6sll_data = { |
| .devtype = FSL_OTP_MX6SLL, |
| .bank_desc = (const char **)imx6sll_otp_desc, |
| /* Bank 7 and Bank 8 are 4 words each */ |
| .fuse_nums = 8 * 8, |
| .set_otp_timing = imx6_set_otp_timing, |
| }; |
| |
| static struct fsl_otp_devtype_data imx6ul_data = { |
| .devtype = FSL_OTP_MX6UL, |
| .bank_desc = (const char **)imx6ul_otp_desc, |
| .fuse_nums = 16 * 8, |
| .set_otp_timing = imx6_set_otp_timing, |
| }; |
| |
| static struct fsl_otp_devtype_data imx6ull_data = { |
| .devtype = FSL_OTP_MX6ULL, |
| .bank_desc = (const char **)imx6ull_otp_desc, |
| /* Bank 7 and Bank 8 are 4 words each */ |
| .fuse_nums = 8 * 8, |
| .set_otp_timing = imx6_set_otp_timing, |
| }; |
| |
| static struct fsl_otp_devtype_data imx7d_data = { |
| .devtype = FSL_OTP_MX7D, |
| .bank_desc = (const char **)imx7d_otp_desc, |
| .fuse_nums = 16 * 4, |
| .set_otp_timing = imx7_set_otp_timing, |
| }; |
| |
| static struct fsl_otp_devtype_data imx7ulp_data = { |
| .devtype = FSL_OTP_MX7ULP, |
| .bank_desc = (const char **)imx7ulp_otp_desc, |
| .fuse_nums = 31 * 8, |
| .set_otp_timing = imx7ulp_set_otp_timing, |
| }; |
| |
| static int otp_wait_busy(u32 flags) |
| { |
| int count; |
| u32 c; |
| |
| for (count = 10000; count >= 0; count--) { |
| c = __raw_readl(otp_base + HW_OCOTP_CTRL); |
| if (!(c & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR | flags))) |
| break; |
| cpu_relax(); |
| } |
| |
| if (count < 0) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static ssize_t fsl_otp_show(struct kobject *kobj, struct kobj_attribute *attr, |
| char *buf) |
| { |
| unsigned int index = attr - otp_kattr; |
| unsigned int phy_index; |
| u32 value = 0; |
| int ret; |
| |
| if (!fsl_otp) |
| return -ENODEV; |
| |
| ret = clk_prepare_enable(otp_clk); |
| if (ret) |
| return -ENODEV; |
| |
| mutex_lock(&otp_mutex); |
| |
| phy_index = fsl_otp_word_physical(fsl_otp, index); |
| fsl_otp->set_otp_timing(); |
| ret = otp_wait_busy(0); |
| if (ret) |
| goto out; |
| |
| if (fsl_otp->devtype == FSL_OTP_MX7ULP) { |
| value = __raw_readl(otp_base + HW_OCOTP_OUT_STATUS_ULP); |
| if (value & BM_OUT_STATUS_DED_ULP) { |
| __raw_writel(BM_OUT_STATUS_DED_ULP, otp_base + HW_OCOTP_OUT_STATUS_CLR_ULP); |
| goto out; |
| } |
| } |
| |
| value = __raw_readl(otp_base + HW_OCOTP_CUST_N(phy_index)); |
| |
| if (fsl_otp->devtype == FSL_OTP_MX7ULP) { |
| __raw_writel(1, otp_base + HW_OCOTP_PDN_ULP); |
| } |
| |
| out: |
| mutex_unlock(&otp_mutex); |
| clk_disable_unprepare(otp_clk); |
| return ret ? 0 : sprintf(buf, "0x%x\n", value); |
| } |
| |
| static int imx6_otp_write_bits(int addr, u32 data, u32 magic) |
| { |
| u32 c; /* for control register */ |
| |
| /* init the control register */ |
| c = __raw_readl(otp_base + HW_OCOTP_CTRL); |
| c &= ~BM_OCOTP_CTRL_ADDR; |
| c |= BF(addr, OCOTP_CTRL_ADDR); |
| c |= BF(magic, OCOTP_CTRL_WR_UNLOCK); |
| __raw_writel(c, otp_base + HW_OCOTP_CTRL); |
| |
| /* init the data register */ |
| __raw_writel(data, otp_base + HW_OCOTP_DATA); |
| otp_wait_busy(0); |
| |
| mdelay(2); /* Write Postamble */ |
| |
| return 0; |
| } |
| |
| static int imx7ulp_otp_write_bits(int addr, u32 data, u32 magic) |
| { |
| u32 c; /* for control register */ |
| |
| /* init the control register */ |
| c = __raw_readl(otp_base + HW_OCOTP_CTRL); |
| c &= ~BM_OCOTP_CTRL_ADDR_MX7ULP; |
| c |= BF(addr, OCOTP_CTRL_ADDR_MX7ULP); |
| c |= BF(magic, OCOTP_CTRL_WR_UNLOCK); |
| __raw_writel(c, otp_base + HW_OCOTP_CTRL); |
| |
| /* init the data register */ |
| __raw_writel(data, otp_base + HW_OCOTP_DATA); |
| otp_wait_busy(0); |
| |
| mdelay(2); /* Write Postamble */ |
| |
| return 0; |
| } |
| |
| static int imx7_otp_write_bits(int addr, u32 data, u32 magic) |
| { |
| u32 c; /* for control register */ |
| |
| /* init the control register */ |
| c = __raw_readl(otp_base + HW_OCOTP_CTRL); |
| c &= ~BM_OCOTP_CTRL_ADDR_MX7D; |
| /* convert to bank address */ |
| c |= BF((addr >> 2), OCOTP_CTRL_ADDR); |
| c |= BF(magic, OCOTP_CTRL_WR_UNLOCK); |
| __raw_writel(c, otp_base + HW_OCOTP_CTRL); |
| |
| /* init the data register */ |
| switch (addr & 0x3) { |
| case 0: |
| __raw_writel(0, otp_base + HW_OCOTP_DATA1_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA2_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA3_MX7D); |
| __raw_writel(data, otp_base + HW_OCOTP_DATA0_MX7D); |
| break; |
| case 1: |
| __raw_writel(data, otp_base + HW_OCOTP_DATA1_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA2_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA3_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA0_MX7D); |
| break; |
| case 2: |
| __raw_writel(0, otp_base + HW_OCOTP_DATA1_MX7D); |
| __raw_writel(data, otp_base + HW_OCOTP_DATA2_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA3_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA0_MX7D); |
| break; |
| case 3: |
| __raw_writel(0, otp_base + HW_OCOTP_DATA1_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA2_MX7D); |
| __raw_writel(data, otp_base + HW_OCOTP_DATA3_MX7D); |
| __raw_writel(0, otp_base + HW_OCOTP_DATA0_MX7D); |
| break; |
| } |
| __raw_writel(data, otp_base + HW_OCOTP_DATA); |
| otp_wait_busy(0); |
| |
| mdelay(2); /* Write Postamble */ |
| |
| return 0; |
| |
| } |
| |
| static ssize_t fsl_otp_store(struct kobject *kobj, struct kobj_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned int index = attr - otp_kattr; |
| unsigned int phy_index; |
| unsigned long value; |
| unsigned long tmp; |
| int ret; |
| |
| if (!fsl_otp) |
| return -ENODEV; |
| |
| ret = kstrtoul(buf, 16, &value); |
| if (ret < 0) |
| return -EINVAL; |
| |
| ret = clk_prepare_enable(otp_clk); |
| if (ret) |
| return -ENODEV; |
| |
| mutex_lock(&otp_mutex); |
| |
| phy_index = fsl_otp_word_physical(fsl_otp, index); |
| if ((fsl_otp->devtype == FSL_OTP_MX7ULP) && (phy_index > 15)) { |
| fsl_otp->set_otp_timing(); |
| ret = otp_wait_busy(0); |
| if (ret) |
| goto out; |
| |
| tmp = __raw_readl(otp_base + HW_OCOTP_OUT_STATUS_ULP); |
| if (tmp & BM_OUT_STATUS_DED_ULP) { |
| __raw_writel(BM_OUT_STATUS_DED_ULP, otp_base + HW_OCOTP_OUT_STATUS_CLR_ULP); |
| goto out; |
| } |
| |
| tmp = __raw_readl(otp_base + HW_OCOTP_CUST_N(phy_index)); |
| |
| __raw_writel(1, otp_base + HW_OCOTP_PDN_ULP); |
| |
| if (tmp != 0) { |
| ret = -EPERM; |
| goto out; |
| } |
| } |
| |
| fsl_otp->set_otp_timing(); |
| ret = otp_wait_busy(0); |
| if (ret) |
| goto out; |
| |
| if (fsl_otp->devtype == FSL_OTP_MX7D) |
| imx7_otp_write_bits(index, value, 0x3e77); |
| else if (fsl_otp->devtype == FSL_OTP_MX7ULP) |
| imx7ulp_otp_write_bits(index, value, 0x3e77); |
| else |
| imx6_otp_write_bits(index, value, 0x3e77); |
| |
| if (fsl_otp->devtype == FSL_OTP_MX7ULP) { |
| value = __raw_readl(otp_base + HW_OCOTP_OUT_STATUS_ULP); |
| if (value & (BM_OUT_STATUS_LOCKED | BM_OUT_STATUS_PROGFAIL)) |
| printk("ulp prog fail\n"); |
| |
| otp_wait_busy(0); |
| } |
| |
| /* Reload all the shadow registers */ |
| __raw_writel(BM_OCOTP_CTRL_RELOAD_SHADOWS, |
| otp_base + HW_OCOTP_CTRL_SET); |
| udelay(1); |
| otp_wait_busy(BM_OCOTP_CTRL_RELOAD_SHADOWS); |
| |
| if (fsl_otp->devtype == FSL_OTP_MX7ULP) { |
| __raw_writel(1, otp_base + HW_OCOTP_PDN_ULP); |
| } |
| |
| out: |
| mutex_unlock(&otp_mutex); |
| clk_disable_unprepare(otp_clk); |
| return ret ? ret : count; |
| } |
| |
| static const struct of_device_id fsl_otp_dt_ids[] = { |
| { .compatible = "fsl,imx6q-ocotp", .data = (void *)&imx6q_data, }, |
| { .compatible = "fsl,imx6sl-ocotp", .data = (void *)&imx6sl_data, }, |
| { .compatible = "fsl,imx6sll-ocotp", .data = (void *)&imx6sll_data, }, |
| { .compatible = "fsl,imx6ul-ocotp", .data = (void *)&imx6ul_data, }, |
| { .compatible = "fsl,imx6ull-ocotp", .data = (void *)&imx6ull_data, }, |
| { .compatible = "fsl,imx7d-ocotp", .data = (void *)&imx7d_data, }, |
| { .compatible = "fsl,imx7ulp-ocotp", .data = (void *)&imx7ulp_data, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_otp_dt_ids); |
| |
| static int fsl_otp_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct attribute **attrs; |
| const char **desc; |
| int i, num; |
| int ret; |
| const struct of_device_id *of_id = |
| of_match_device(fsl_otp_dt_ids, &pdev->dev); |
| |
| fsl_otp = (struct fsl_otp_devtype_data *)of_id->data; |
| if (!fsl_otp) { |
| dev_err(&pdev->dev, "No driver data provided!\n"); |
| return -ENODEV; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| otp_base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(otp_base)) { |
| ret = PTR_ERR(otp_base); |
| dev_err(&pdev->dev, "failed to ioremap resource: %d\n", ret); |
| return ret; |
| } |
| |
| otp_clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(otp_clk)) { |
| ret = PTR_ERR(otp_clk); |
| dev_err(&pdev->dev, "failed to get clock: %d\n", ret); |
| return ret; |
| } |
| |
| desc = fsl_otp->bank_desc; |
| num = fsl_otp->fuse_nums; |
| |
| /* The last one is NULL, which is used to detect the end */ |
| attrs = devm_kzalloc(&pdev->dev, (num + 1) * sizeof(*attrs), |
| GFP_KERNEL); |
| otp_kattr = devm_kzalloc(&pdev->dev, num * sizeof(*otp_kattr), |
| GFP_KERNEL); |
| otp_attr_group = devm_kzalloc(&pdev->dev, sizeof(*otp_attr_group), |
| GFP_KERNEL); |
| if (!attrs || !otp_kattr || !otp_attr_group) |
| return -ENOMEM; |
| |
| for (i = 0; i < num; i++) { |
| sysfs_attr_init(&otp_kattr[i].attr); |
| otp_kattr[i].attr.name = desc[i]; |
| otp_kattr[i].attr.mode = 0600; |
| otp_kattr[i].show = fsl_otp_show; |
| otp_kattr[i].store = fsl_otp_store; |
| attrs[i] = &otp_kattr[i].attr; |
| } |
| otp_attr_group->attrs = attrs; |
| |
| otp_kobj = kobject_create_and_add("fsl_otp", NULL); |
| if (!otp_kobj) { |
| dev_err(&pdev->dev, "failed to add kobject\n"); |
| return -ENOMEM; |
| } |
| |
| ret = sysfs_create_group(otp_kobj, otp_attr_group); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to create sysfs group: %d\n", ret); |
| kobject_put(otp_kobj); |
| return ret; |
| } |
| |
| mutex_init(&otp_mutex); |
| |
| return 0; |
| } |
| |
| static int fsl_otp_remove(struct platform_device *pdev) |
| { |
| sysfs_remove_group(otp_kobj, otp_attr_group); |
| kobject_put(otp_kobj); |
| |
| return 0; |
| } |
| |
| static struct platform_driver fsl_otp_driver = { |
| .driver = { |
| .name = "imx-ocotp", |
| .owner = THIS_MODULE, |
| .of_match_table = fsl_otp_dt_ids, |
| }, |
| .probe = fsl_otp_probe, |
| .remove = fsl_otp_remove, |
| }; |
| module_platform_driver(fsl_otp_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Huang Shijie <b32955@freescale.com>"); |
| MODULE_DESCRIPTION("Freescale i.MX OCOTP driver"); |