| /* | |
| * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) | |
| * Copyright (C) 1998-2002 Linux ATA Development | |
| * Andre Hedrick <andre@linux-ide.org> | |
| * Copyright (C) 2003 Red Hat | |
| * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz | |
| */ | |
| /* | |
| * Mostly written by Mark Lord <mlord@pobox.com> | |
| * and Gadi Oxman <gadio@netvision.net.il> | |
| * and Andre Hedrick <andre@linux-ide.org> | |
| * | |
| * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/timer.h> | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/major.h> | |
| #include <linux/errno.h> | |
| #include <linux/genhd.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/mutex.h> | |
| #include <linux/leds.h> | |
| #include <linux/ide.h> | |
| #include <asm/byteorder.h> | |
| #include <asm/irq.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/io.h> | |
| #include <asm/div64.h> | |
| #include "ide-disk.h" | |
| static const u8 ide_rw_cmds[] = { | |
| ATA_CMD_READ_MULTI, | |
| ATA_CMD_WRITE_MULTI, | |
| ATA_CMD_READ_MULTI_EXT, | |
| ATA_CMD_WRITE_MULTI_EXT, | |
| ATA_CMD_PIO_READ, | |
| ATA_CMD_PIO_WRITE, | |
| ATA_CMD_PIO_READ_EXT, | |
| ATA_CMD_PIO_WRITE_EXT, | |
| ATA_CMD_READ, | |
| ATA_CMD_WRITE, | |
| ATA_CMD_READ_EXT, | |
| ATA_CMD_WRITE_EXT, | |
| }; | |
| static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma) | |
| { | |
| u8 index, lba48, write; | |
| lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0; | |
| write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0; | |
| if (dma) { | |
| cmd->protocol = ATA_PROT_DMA; | |
| index = 8; | |
| } else { | |
| cmd->protocol = ATA_PROT_PIO; | |
| if (drive->mult_count) { | |
| cmd->tf_flags |= IDE_TFLAG_MULTI_PIO; | |
| index = 0; | |
| } else | |
| index = 4; | |
| } | |
| cmd->tf.command = ide_rw_cmds[index + lba48 + write]; | |
| } | |
| /* | |
| * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | |
| * using LBA if supported, or CHS otherwise, to address sectors. | |
| */ | |
| static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, | |
| sector_t block) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u16 nsectors = (u16)blk_rq_sectors(rq); | |
| u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); | |
| u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); | |
| struct ide_cmd cmd; | |
| struct ide_taskfile *tf = &cmd.tf; | |
| ide_startstop_t rc; | |
| if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { | |
| if (block + blk_rq_sectors(rq) > 1ULL << 28) | |
| dma = 0; | |
| else | |
| lba48 = 0; | |
| } | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; | |
| if (drive->dev_flags & IDE_DFLAG_LBA) { | |
| if (lba48) { | |
| pr_debug("%s: LBA=0x%012llx\n", drive->name, | |
| (unsigned long long)block); | |
| tf->nsect = nsectors & 0xff; | |
| tf->lbal = (u8) block; | |
| tf->lbam = (u8)(block >> 8); | |
| tf->lbah = (u8)(block >> 16); | |
| tf->device = ATA_LBA; | |
| tf = &cmd.hob; | |
| tf->nsect = (nsectors >> 8) & 0xff; | |
| tf->lbal = (u8)(block >> 24); | |
| if (sizeof(block) != 4) { | |
| tf->lbam = (u8)((u64)block >> 32); | |
| tf->lbah = (u8)((u64)block >> 40); | |
| } | |
| cmd.valid.out.hob = IDE_VALID_OUT_HOB; | |
| cmd.valid.in.hob = IDE_VALID_IN_HOB; | |
| cmd.tf_flags |= IDE_TFLAG_LBA48; | |
| } else { | |
| tf->nsect = nsectors & 0xff; | |
| tf->lbal = block; | |
| tf->lbam = block >>= 8; | |
| tf->lbah = block >>= 8; | |
| tf->device = ((block >> 8) & 0xf) | ATA_LBA; | |
| } | |
| } else { | |
| unsigned int sect, head, cyl, track; | |
| track = (int)block / drive->sect; | |
| sect = (int)block % drive->sect + 1; | |
| head = track % drive->head; | |
| cyl = track / drive->head; | |
| pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | |
| tf->nsect = nsectors & 0xff; | |
| tf->lbal = sect; | |
| tf->lbam = cyl; | |
| tf->lbah = cyl >> 8; | |
| tf->device = head; | |
| } | |
| cmd.tf_flags |= IDE_TFLAG_FS; | |
| if (rq_data_dir(rq)) | |
| cmd.tf_flags |= IDE_TFLAG_WRITE; | |
| ide_tf_set_cmd(drive, &cmd, dma); | |
| cmd.rq = rq; | |
| if (dma == 0) { | |
| ide_init_sg_cmd(&cmd, nsectors << 9); | |
| ide_map_sg(drive, &cmd); | |
| } | |
| rc = do_rw_taskfile(drive, &cmd); | |
| if (rc == ide_stopped && dma) { | |
| /* fallback to PIO */ | |
| cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK; | |
| ide_tf_set_cmd(drive, &cmd, 0); | |
| ide_init_sg_cmd(&cmd, nsectors << 9); | |
| rc = do_rw_taskfile(drive, &cmd); | |
| } | |
| return rc; | |
| } | |
| /* | |
| * 268435455 == 137439 MB or 28bit limit | |
| * 320173056 == 163929 MB or 48bit addressing | |
| * 1073741822 == 549756 MB or 48bit addressing fake drive | |
| */ | |
| static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, | |
| sector_t block) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED); | |
| BUG_ON(rq->cmd_type != REQ_TYPE_FS); | |
| ledtrig_ide_activity(); | |
| pr_debug("%s: %sing: block=%llu, sectors=%u\n", | |
| drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | |
| (unsigned long long)block, blk_rq_sectors(rq)); | |
| if (hwif->rw_disk) | |
| hwif->rw_disk(drive, rq); | |
| return __ide_do_rw_disk(drive, rq, block); | |
| } | |
| /* | |
| * Queries for true maximum capacity of the drive. | |
| * Returns maximum LBA address (> 0) of the drive, 0 if failed. | |
| */ | |
| static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) | |
| { | |
| struct ide_cmd cmd; | |
| struct ide_taskfile *tf = &cmd.tf; | |
| u64 addr = 0; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| if (lba48) | |
| tf->command = ATA_CMD_READ_NATIVE_MAX_EXT; | |
| else | |
| tf->command = ATA_CMD_READ_NATIVE_MAX; | |
| tf->device = ATA_LBA; | |
| cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; | |
| if (lba48) { | |
| cmd.valid.out.hob = IDE_VALID_OUT_HOB; | |
| cmd.valid.in.hob = IDE_VALID_IN_HOB; | |
| cmd.tf_flags = IDE_TFLAG_LBA48; | |
| } | |
| ide_no_data_taskfile(drive, &cmd); | |
| /* if OK, compute maximum address value */ | |
| if (!(tf->status & ATA_ERR)) | |
| addr = ide_get_lba_addr(&cmd, lba48) + 1; | |
| return addr; | |
| } | |
| /* | |
| * Sets maximum virtual LBA address of the drive. | |
| * Returns new maximum virtual LBA address (> 0) or 0 on failure. | |
| */ | |
| static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) | |
| { | |
| struct ide_cmd cmd; | |
| struct ide_taskfile *tf = &cmd.tf; | |
| u64 addr_set = 0; | |
| addr_req--; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| tf->lbal = (addr_req >> 0) & 0xff; | |
| tf->lbam = (addr_req >>= 8) & 0xff; | |
| tf->lbah = (addr_req >>= 8) & 0xff; | |
| if (lba48) { | |
| cmd.hob.lbal = (addr_req >>= 8) & 0xff; | |
| cmd.hob.lbam = (addr_req >>= 8) & 0xff; | |
| cmd.hob.lbah = (addr_req >>= 8) & 0xff; | |
| tf->command = ATA_CMD_SET_MAX_EXT; | |
| } else { | |
| tf->device = (addr_req >>= 8) & 0x0f; | |
| tf->command = ATA_CMD_SET_MAX; | |
| } | |
| tf->device |= ATA_LBA; | |
| cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; | |
| if (lba48) { | |
| cmd.valid.out.hob = IDE_VALID_OUT_HOB; | |
| cmd.valid.in.hob = IDE_VALID_IN_HOB; | |
| cmd.tf_flags = IDE_TFLAG_LBA48; | |
| } | |
| ide_no_data_taskfile(drive, &cmd); | |
| /* if OK, compute maximum address value */ | |
| if (!(tf->status & ATA_ERR)) | |
| addr_set = ide_get_lba_addr(&cmd, lba48) + 1; | |
| return addr_set; | |
| } | |
| static unsigned long long sectors_to_MB(unsigned long long n) | |
| { | |
| n <<= 9; /* make it bytes */ | |
| do_div(n, 1000000); /* make it MB */ | |
| return n; | |
| } | |
| /* | |
| * Some disks report total number of sectors instead of | |
| * maximum sector address. We list them here. | |
| */ | |
| static const struct drive_list_entry hpa_list[] = { | |
| { "ST340823A", NULL }, | |
| { "ST320413A", NULL }, | |
| { "ST310211A", NULL }, | |
| { NULL, NULL } | |
| }; | |
| static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48) | |
| { | |
| u64 capacity, set_max; | |
| capacity = drive->capacity64; | |
| set_max = idedisk_read_native_max_address(drive, lba48); | |
| if (ide_in_drive_list(drive->id, hpa_list)) { | |
| /* | |
| * Since we are inclusive wrt to firmware revisions do this | |
| * extra check and apply the workaround only when needed. | |
| */ | |
| if (set_max == capacity + 1) | |
| set_max--; | |
| } | |
| return set_max; | |
| } | |
| static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48) | |
| { | |
| set_max = idedisk_set_max_address(drive, set_max, lba48); | |
| if (set_max) | |
| drive->capacity64 = set_max; | |
| return set_max; | |
| } | |
| static void idedisk_check_hpa(ide_drive_t *drive) | |
| { | |
| u64 capacity, set_max; | |
| int lba48 = ata_id_lba48_enabled(drive->id); | |
| capacity = drive->capacity64; | |
| set_max = ide_disk_hpa_get_native_capacity(drive, lba48); | |
| if (set_max <= capacity) | |
| return; | |
| drive->probed_capacity = set_max; | |
| printk(KERN_INFO "%s: Host Protected Area detected.\n" | |
| "\tcurrent capacity is %llu sectors (%llu MB)\n" | |
| "\tnative capacity is %llu sectors (%llu MB)\n", | |
| drive->name, | |
| capacity, sectors_to_MB(capacity), | |
| set_max, sectors_to_MB(set_max)); | |
| if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0) | |
| return; | |
| set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48); | |
| if (set_max) | |
| printk(KERN_INFO "%s: Host Protected Area disabled.\n", | |
| drive->name); | |
| } | |
| static int ide_disk_get_capacity(ide_drive_t *drive) | |
| { | |
| u16 *id = drive->id; | |
| int lba; | |
| if (ata_id_lba48_enabled(id)) { | |
| /* drive speaks 48-bit LBA */ | |
| lba = 1; | |
| drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); | |
| } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) { | |
| /* drive speaks 28-bit LBA */ | |
| lba = 1; | |
| drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY); | |
| } else { | |
| /* drive speaks boring old 28-bit CHS */ | |
| lba = 0; | |
| drive->capacity64 = drive->cyl * drive->head * drive->sect; | |
| } | |
| drive->probed_capacity = drive->capacity64; | |
| if (lba) { | |
| drive->dev_flags |= IDE_DFLAG_LBA; | |
| /* | |
| * If this device supports the Host Protected Area feature set, | |
| * then we may need to change our opinion about its capacity. | |
| */ | |
| if (ata_id_hpa_enabled(id)) | |
| idedisk_check_hpa(drive); | |
| } | |
| /* limit drive capacity to 137GB if LBA48 cannot be used */ | |
| if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 && | |
| drive->capacity64 > 1ULL << 28) { | |
| printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | |
| "%llu sectors (%llu MB)\n", | |
| drive->name, (unsigned long long)drive->capacity64, | |
| sectors_to_MB(drive->capacity64)); | |
| drive->probed_capacity = drive->capacity64 = 1ULL << 28; | |
| } | |
| if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && | |
| (drive->dev_flags & IDE_DFLAG_LBA48)) { | |
| if (drive->capacity64 > 1ULL << 28) { | |
| printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode" | |
| " will be used for accessing sectors " | |
| "> %u\n", drive->name, 1 << 28); | |
| } else | |
| drive->dev_flags &= ~IDE_DFLAG_LBA48; | |
| } | |
| return 0; | |
| } | |
| static void ide_disk_unlock_native_capacity(ide_drive_t *drive) | |
| { | |
| u16 *id = drive->id; | |
| int lba48 = ata_id_lba48_enabled(id); | |
| if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 || | |
| ata_id_hpa_enabled(id) == 0) | |
| return; | |
| /* | |
| * according to the spec the SET MAX ADDRESS command shall be | |
| * immediately preceded by a READ NATIVE MAX ADDRESS command | |
| */ | |
| if (!ide_disk_hpa_get_native_capacity(drive, lba48)) | |
| return; | |
| if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48)) | |
| drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */ | |
| } | |
| static int idedisk_prep_fn(struct request_queue *q, struct request *rq) | |
| { | |
| ide_drive_t *drive = q->queuedata; | |
| struct ide_cmd *cmd; | |
| if (!(rq->cmd_flags & REQ_FLUSH)) | |
| return BLKPREP_OK; | |
| if (rq->special) { | |
| cmd = rq->special; | |
| memset(cmd, 0, sizeof(*cmd)); | |
| } else { | |
| cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC); | |
| } | |
| /* FIXME: map struct ide_taskfile on rq->cmd[] */ | |
| BUG_ON(cmd == NULL); | |
| if (ata_id_flush_ext_enabled(drive->id) && | |
| (drive->capacity64 >= (1UL << 28))) | |
| cmd->tf.command = ATA_CMD_FLUSH_EXT; | |
| else | |
| cmd->tf.command = ATA_CMD_FLUSH; | |
| cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd->tf_flags = IDE_TFLAG_DYN; | |
| cmd->protocol = ATA_PROT_NODATA; | |
| rq->cmd_type = REQ_TYPE_ATA_TASKFILE; | |
| rq->special = cmd; | |
| cmd->rq = rq; | |
| return BLKPREP_OK; | |
| } | |
| ide_devset_get(multcount, mult_count); | |
| /* | |
| * This is tightly woven into the driver->do_special can not touch. | |
| * DON'T do it again until a total personality rewrite is committed. | |
| */ | |
| static int set_multcount(ide_drive_t *drive, int arg) | |
| { | |
| struct request *rq; | |
| int error; | |
| if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff)) | |
| return -EINVAL; | |
| if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) | |
| return -EBUSY; | |
| rq = blk_get_request(drive->queue, READ, __GFP_WAIT); | |
| rq->cmd_type = REQ_TYPE_ATA_TASKFILE; | |
| drive->mult_req = arg; | |
| drive->special_flags |= IDE_SFLAG_SET_MULTMODE; | |
| error = blk_execute_rq(drive->queue, NULL, rq, 0); | |
| blk_put_request(rq); | |
| return (drive->mult_count == arg) ? 0 : -EIO; | |
| } | |
| ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR); | |
| static int set_nowerr(ide_drive_t *drive, int arg) | |
| { | |
| if (arg < 0 || arg > 1) | |
| return -EINVAL; | |
| if (arg) | |
| drive->dev_flags |= IDE_DFLAG_NOWERR; | |
| else | |
| drive->dev_flags &= ~IDE_DFLAG_NOWERR; | |
| drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | |
| return 0; | |
| } | |
| static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) | |
| { | |
| struct ide_cmd cmd; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.tf.feature = feature; | |
| cmd.tf.nsect = nsect; | |
| cmd.tf.command = ATA_CMD_SET_FEATURES; | |
| cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; | |
| return ide_no_data_taskfile(drive, &cmd); | |
| } | |
| static void update_flush(ide_drive_t *drive) | |
| { | |
| u16 *id = drive->id; | |
| unsigned flush = 0; | |
| if (drive->dev_flags & IDE_DFLAG_WCACHE) { | |
| unsigned long long capacity; | |
| int barrier; | |
| /* | |
| * We must avoid issuing commands a drive does not | |
| * understand or we may crash it. We check flush cache | |
| * is supported. We also check we have the LBA48 flush | |
| * cache if the drive capacity is too large. By this | |
| * time we have trimmed the drive capacity if LBA48 is | |
| * not available so we don't need to recheck that. | |
| */ | |
| capacity = ide_gd_capacity(drive); | |
| barrier = ata_id_flush_enabled(id) && | |
| (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 && | |
| ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 || | |
| capacity <= (1ULL << 28) || | |
| ata_id_flush_ext_enabled(id)); | |
| printk(KERN_INFO "%s: cache flushes %ssupported\n", | |
| drive->name, barrier ? "" : "not "); | |
| if (barrier) { | |
| flush = REQ_FLUSH; | |
| blk_queue_prep_rq(drive->queue, idedisk_prep_fn); | |
| } | |
| } | |
| blk_queue_flush(drive->queue, flush); | |
| } | |
| ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); | |
| static int set_wcache(ide_drive_t *drive, int arg) | |
| { | |
| int err = 1; | |
| if (arg < 0 || arg > 1) | |
| return -EINVAL; | |
| if (ata_id_flush_enabled(drive->id)) { | |
| err = ide_do_setfeature(drive, | |
| arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0); | |
| if (err == 0) { | |
| if (arg) | |
| drive->dev_flags |= IDE_DFLAG_WCACHE; | |
| else | |
| drive->dev_flags &= ~IDE_DFLAG_WCACHE; | |
| } | |
| } | |
| update_flush(drive); | |
| return err; | |
| } | |
| static int do_idedisk_flushcache(ide_drive_t *drive) | |
| { | |
| struct ide_cmd cmd; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| if (ata_id_flush_ext_enabled(drive->id)) | |
| cmd.tf.command = ATA_CMD_FLUSH_EXT; | |
| else | |
| cmd.tf.command = ATA_CMD_FLUSH; | |
| cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; | |
| return ide_no_data_taskfile(drive, &cmd); | |
| } | |
| ide_devset_get(acoustic, acoustic); | |
| static int set_acoustic(ide_drive_t *drive, int arg) | |
| { | |
| if (arg < 0 || arg > 254) | |
| return -EINVAL; | |
| ide_do_setfeature(drive, | |
| arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg); | |
| drive->acoustic = arg; | |
| return 0; | |
| } | |
| ide_devset_get_flag(addressing, IDE_DFLAG_LBA48); | |
| /* | |
| * drive->addressing: | |
| * 0: 28-bit | |
| * 1: 48-bit | |
| * 2: 48-bit capable doing 28-bit | |
| */ | |
| static int set_addressing(ide_drive_t *drive, int arg) | |
| { | |
| if (arg < 0 || arg > 2) | |
| return -EINVAL; | |
| if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) || | |
| ata_id_lba48_enabled(drive->id) == 0)) | |
| return -EIO; | |
| if (arg == 2) | |
| arg = 0; | |
| if (arg) | |
| drive->dev_flags |= IDE_DFLAG_LBA48; | |
| else | |
| drive->dev_flags &= ~IDE_DFLAG_LBA48; | |
| return 0; | |
| } | |
| ide_ext_devset_rw(acoustic, acoustic); | |
| ide_ext_devset_rw(address, addressing); | |
| ide_ext_devset_rw(multcount, multcount); | |
| ide_ext_devset_rw(wcache, wcache); | |
| ide_ext_devset_rw_sync(nowerr, nowerr); | |
| static int ide_disk_check(ide_drive_t *drive, const char *s) | |
| { | |
| return 1; | |
| } | |
| static void ide_disk_setup(ide_drive_t *drive) | |
| { | |
| struct ide_disk_obj *idkp = drive->driver_data; | |
| struct request_queue *q = drive->queue; | |
| ide_hwif_t *hwif = drive->hwif; | |
| u16 *id = drive->id; | |
| char *m = (char *)&id[ATA_ID_PROD]; | |
| unsigned long long capacity; | |
| ide_proc_register_driver(drive, idkp->driver); | |
| if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) | |
| return; | |
| if (drive->dev_flags & IDE_DFLAG_REMOVABLE) { | |
| /* | |
| * Removable disks (eg. SYQUEST); ignore 'WD' drives | |
| */ | |
| if (m[0] != 'W' || m[1] != 'D') | |
| drive->dev_flags |= IDE_DFLAG_DOORLOCKING; | |
| } | |
| (void)set_addressing(drive, 1); | |
| if (drive->dev_flags & IDE_DFLAG_LBA48) { | |
| int max_s = 2048; | |
| if (max_s > hwif->rqsize) | |
| max_s = hwif->rqsize; | |
| blk_queue_max_hw_sectors(q, max_s); | |
| } | |
| printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, | |
| queue_max_sectors(q) / 2); | |
| if (ata_id_is_ssd(id)) | |
| queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); | |
| /* calculate drive capacity, and select LBA if possible */ | |
| ide_disk_get_capacity(drive); | |
| /* | |
| * if possible, give fdisk access to more of the drive, | |
| * by correcting bios_cyls: | |
| */ | |
| capacity = ide_gd_capacity(drive); | |
| if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) { | |
| if (ata_id_lba48_enabled(drive->id)) { | |
| /* compatibility */ | |
| drive->bios_sect = 63; | |
| drive->bios_head = 255; | |
| } | |
| if (drive->bios_sect && drive->bios_head) { | |
| unsigned int cap0 = capacity; /* truncate to 32 bits */ | |
| unsigned int cylsz, cyl; | |
| if (cap0 != capacity) | |
| drive->bios_cyl = 65535; | |
| else { | |
| cylsz = drive->bios_sect * drive->bios_head; | |
| cyl = cap0 / cylsz; | |
| if (cyl > 65535) | |
| cyl = 65535; | |
| if (cyl > drive->bios_cyl) | |
| drive->bios_cyl = cyl; | |
| } | |
| } | |
| } | |
| printk(KERN_INFO "%s: %llu sectors (%llu MB)", | |
| drive->name, capacity, sectors_to_MB(capacity)); | |
| /* Only print cache size when it was specified */ | |
| if (id[ATA_ID_BUF_SIZE]) | |
| printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2); | |
| printk(KERN_CONT ", CHS=%d/%d/%d\n", | |
| drive->bios_cyl, drive->bios_head, drive->bios_sect); | |
| /* write cache enabled? */ | |
| if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id)) | |
| drive->dev_flags |= IDE_DFLAG_WCACHE; | |
| set_wcache(drive, 1); | |
| if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 && | |
| (drive->head == 0 || drive->head > 16)) { | |
| printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n", | |
| drive->name, drive->head); | |
| drive->dev_flags &= ~IDE_DFLAG_ATTACH; | |
| } else | |
| drive->dev_flags |= IDE_DFLAG_ATTACH; | |
| } | |
| static void ide_disk_flush(ide_drive_t *drive) | |
| { | |
| if (ata_id_flush_enabled(drive->id) == 0 || | |
| (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) | |
| return; | |
| if (do_idedisk_flushcache(drive)) | |
| printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | |
| } | |
| static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk) | |
| { | |
| return 0; | |
| } | |
| static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, | |
| int on) | |
| { | |
| struct ide_cmd cmd; | |
| int ret; | |
| if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) | |
| return 0; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; | |
| cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; | |
| cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; | |
| ret = ide_no_data_taskfile(drive, &cmd); | |
| if (ret) | |
| drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; | |
| return ret; | |
| } | |
| const struct ide_disk_ops ide_ata_disk_ops = { | |
| .check = ide_disk_check, | |
| .unlock_native_capacity = ide_disk_unlock_native_capacity, | |
| .get_capacity = ide_disk_get_capacity, | |
| .setup = ide_disk_setup, | |
| .flush = ide_disk_flush, | |
| .init_media = ide_disk_init_media, | |
| .set_doorlock = ide_disk_set_doorlock, | |
| .do_request = ide_do_rw_disk, | |
| .ioctl = ide_disk_ioctl, | |
| }; |