| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * core.c - ChipIdea USB IP core family device controller |
| * |
| * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. |
| * |
| * Author: David Lopo |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* |
| * Description: ChipIdea USB IP core family device controller |
| * |
| * This driver is composed of several blocks: |
| * - HW: hardware interface |
| * - DBG: debug facilities (optional) |
| * - UTIL: utilities |
| * - ISR: interrupts handling |
| * - ENDPT: endpoint operations (Gadget API) |
| * - GADGET: gadget operations (Gadget API) |
| * - BUS: bus glue code, bus abstraction layer |
| * |
| * Compile Options |
| * - STALL_IN: non-empty bulk-in pipes cannot be halted |
| * if defined mass storage compliance succeeds but with warnings |
| * => case 4: Hi > Dn |
| * => case 5: Hi > Di |
| * => case 8: Hi <> Do |
| * if undefined usbtest 13 fails |
| * - TRACE: enable function tracing (depends on DEBUG) |
| * |
| * Main Features |
| * - Chapter 9 & Mass Storage Compliance with Gadget File Storage |
| * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) |
| * - Normal & LPM support |
| * |
| * USBTEST Report |
| * - OK: 0-12, 13 (STALL_IN defined) & 14 |
| * - Not Supported: 15 & 16 (ISO) |
| * |
| * TODO List |
| * - Suspend & Remote Wakeup |
| */ |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/extcon.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/chipidea.h> |
| #include <linux/usb/of.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/usb/ehci_def.h> |
| |
| #include "ci.h" |
| #include "udc.h" |
| #include "bits.h" |
| #include "host.h" |
| #include "otg.h" |
| #include "otg_fsm.h" |
| |
| /* Controller register map */ |
| static const u8 ci_regs_nolpm[] = { |
| [CAP_CAPLENGTH] = 0x00U, |
| [CAP_HCCPARAMS] = 0x08U, |
| [CAP_DCCPARAMS] = 0x24U, |
| [CAP_TESTMODE] = 0x38U, |
| [OP_USBCMD] = 0x00U, |
| [OP_USBSTS] = 0x04U, |
| [OP_USBINTR] = 0x08U, |
| [OP_DEVICEADDR] = 0x14U, |
| [OP_ENDPTLISTADDR] = 0x18U, |
| [OP_TTCTRL] = 0x1CU, |
| [OP_BURSTSIZE] = 0x20U, |
| [OP_ULPI_VIEWPORT] = 0x30U, |
| [OP_PORTSC] = 0x44U, |
| [OP_DEVLC] = 0x84U, |
| [OP_OTGSC] = 0x64U, |
| [OP_USBMODE] = 0x68U, |
| [OP_ENDPTSETUPSTAT] = 0x6CU, |
| [OP_ENDPTPRIME] = 0x70U, |
| [OP_ENDPTFLUSH] = 0x74U, |
| [OP_ENDPTSTAT] = 0x78U, |
| [OP_ENDPTCOMPLETE] = 0x7CU, |
| [OP_ENDPTCTRL] = 0x80U, |
| }; |
| |
| static const u8 ci_regs_lpm[] = { |
| [CAP_CAPLENGTH] = 0x00U, |
| [CAP_HCCPARAMS] = 0x08U, |
| [CAP_DCCPARAMS] = 0x24U, |
| [CAP_TESTMODE] = 0xFCU, |
| [OP_USBCMD] = 0x00U, |
| [OP_USBSTS] = 0x04U, |
| [OP_USBINTR] = 0x08U, |
| [OP_DEVICEADDR] = 0x14U, |
| [OP_ENDPTLISTADDR] = 0x18U, |
| [OP_TTCTRL] = 0x1CU, |
| [OP_BURSTSIZE] = 0x20U, |
| [OP_ULPI_VIEWPORT] = 0x30U, |
| [OP_PORTSC] = 0x44U, |
| [OP_DEVLC] = 0x84U, |
| [OP_OTGSC] = 0xC4U, |
| [OP_USBMODE] = 0xC8U, |
| [OP_ENDPTSETUPSTAT] = 0xD8U, |
| [OP_ENDPTPRIME] = 0xDCU, |
| [OP_ENDPTFLUSH] = 0xE0U, |
| [OP_ENDPTSTAT] = 0xE4U, |
| [OP_ENDPTCOMPLETE] = 0xE8U, |
| [OP_ENDPTCTRL] = 0xECU, |
| }; |
| |
| static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) |
| { |
| int i; |
| |
| for (i = 0; i < OP_ENDPTCTRL; i++) |
| ci->hw_bank.regmap[i] = |
| (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + |
| (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); |
| |
| for (; i <= OP_LAST; i++) |
| ci->hw_bank.regmap[i] = ci->hw_bank.op + |
| 4 * (i - OP_ENDPTCTRL) + |
| (is_lpm |
| ? ci_regs_lpm[OP_ENDPTCTRL] |
| : ci_regs_nolpm[OP_ENDPTCTRL]); |
| |
| } |
| |
| static enum ci_revision ci_get_revision(struct ci_hdrc *ci) |
| { |
| int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION); |
| enum ci_revision rev = CI_REVISION_UNKNOWN; |
| |
| if (ver == 0x2) { |
| rev = hw_read_id_reg(ci, ID_ID, REVISION) |
| >> __ffs(REVISION); |
| rev += CI_REVISION_20; |
| } else if (ver == 0x0) { |
| rev = CI_REVISION_1X; |
| } |
| |
| return rev; |
| } |
| |
| /** |
| * hw_read_intr_enable: returns interrupt enable register |
| * |
| * @ci: the controller |
| * |
| * This function returns register data |
| */ |
| u32 hw_read_intr_enable(struct ci_hdrc *ci) |
| { |
| return hw_read(ci, OP_USBINTR, ~0); |
| } |
| |
| /** |
| * hw_read_intr_status: returns interrupt status register |
| * |
| * @ci: the controller |
| * |
| * This function returns register data |
| */ |
| u32 hw_read_intr_status(struct ci_hdrc *ci) |
| { |
| return hw_read(ci, OP_USBSTS, ~0); |
| } |
| |
| /** |
| * hw_port_test_set: writes port test mode (execute without interruption) |
| * @mode: new value |
| * |
| * This function returns an error code |
| */ |
| int hw_port_test_set(struct ci_hdrc *ci, u8 mode) |
| { |
| const u8 TEST_MODE_MAX = 7; |
| |
| if (mode > TEST_MODE_MAX) |
| return -EINVAL; |
| |
| hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); |
| return 0; |
| } |
| |
| /** |
| * hw_port_test_get: reads port test mode value |
| * |
| * @ci: the controller |
| * |
| * This function returns port test mode value |
| */ |
| u8 hw_port_test_get(struct ci_hdrc *ci) |
| { |
| return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); |
| } |
| |
| static void hw_wait_phy_stable(void) |
| { |
| /* |
| * The phy needs some delay to output the stable status from low |
| * power mode. And for OTGSC, the status inputs are debounced |
| * using a 1 ms time constant, so, delay 2ms for controller to get |
| * the stable status, like vbus and id when the phy leaves low power. |
| */ |
| usleep_range(2000, 2500); |
| } |
| |
| /* The PHY enters/leaves low power mode */ |
| static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) |
| { |
| enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC; |
| bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm))); |
| |
| if (enable && !lpm) |
| hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), |
| PORTSC_PHCD(ci->hw_bank.lpm)); |
| else if (!enable && lpm) |
| hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), |
| 0); |
| } |
| |
| static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) |
| { |
| u32 reg; |
| |
| /* bank is a module variable */ |
| ci->hw_bank.abs = base; |
| |
| ci->hw_bank.cap = ci->hw_bank.abs; |
| ci->hw_bank.cap += ci->platdata->capoffset; |
| ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); |
| |
| hw_alloc_regmap(ci, false); |
| reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> |
| __ffs(HCCPARAMS_LEN); |
| ci->hw_bank.lpm = reg; |
| if (reg) |
| hw_alloc_regmap(ci, !!reg); |
| ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; |
| ci->hw_bank.size += OP_LAST; |
| ci->hw_bank.size /= sizeof(u32); |
| |
| reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> |
| __ffs(DCCPARAMS_DEN); |
| ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ |
| |
| if (ci->hw_ep_max > ENDPT_MAX) |
| return -ENODEV; |
| |
| ci_hdrc_enter_lpm(ci, false); |
| |
| /* Disable all interrupts bits */ |
| hw_write(ci, OP_USBINTR, 0xffffffff, 0); |
| |
| /* Clear all interrupts status bits*/ |
| hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); |
| |
| ci->rev = ci_get_revision(ci); |
| |
| dev_dbg(ci->dev, |
| "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n", |
| ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); |
| |
| /* setup lock mode ? */ |
| |
| /* ENDPTSETUPSTAT is '0' by default */ |
| |
| /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ |
| |
| return 0; |
| } |
| |
| void hw_phymode_configure(struct ci_hdrc *ci) |
| { |
| u32 portsc, lpm, sts = 0; |
| |
| switch (ci->platdata->phy_mode) { |
| case USBPHY_INTERFACE_MODE_UTMI: |
| portsc = PORTSC_PTS(PTS_UTMI); |
| lpm = DEVLC_PTS(PTS_UTMI); |
| break; |
| case USBPHY_INTERFACE_MODE_UTMIW: |
| portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; |
| lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; |
| break; |
| case USBPHY_INTERFACE_MODE_ULPI: |
| portsc = PORTSC_PTS(PTS_ULPI); |
| lpm = DEVLC_PTS(PTS_ULPI); |
| break; |
| case USBPHY_INTERFACE_MODE_SERIAL: |
| portsc = PORTSC_PTS(PTS_SERIAL); |
| lpm = DEVLC_PTS(PTS_SERIAL); |
| sts = 1; |
| break; |
| case USBPHY_INTERFACE_MODE_HSIC: |
| portsc = PORTSC_PTS(PTS_HSIC); |
| lpm = DEVLC_PTS(PTS_HSIC); |
| break; |
| default: |
| return; |
| } |
| |
| if (ci->hw_bank.lpm) { |
| hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); |
| if (sts) |
| hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS); |
| } else { |
| hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); |
| if (sts) |
| hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS); |
| } |
| } |
| EXPORT_SYMBOL_GPL(hw_phymode_configure); |
| |
| /** |
| * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy |
| * interfaces |
| * @ci: the controller |
| * |
| * This function returns an error code if the phy failed to init |
| */ |
| static int _ci_usb_phy_init(struct ci_hdrc *ci) |
| { |
| int ret; |
| |
| if (ci->phy) { |
| ret = phy_init(ci->phy); |
| if (ret) |
| return ret; |
| |
| ret = phy_power_on(ci->phy); |
| if (ret) { |
| phy_exit(ci->phy); |
| return ret; |
| } |
| } else { |
| ret = usb_phy_init(ci->usb_phy); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy |
| * interfaces |
| * @ci: the controller |
| */ |
| static void ci_usb_phy_exit(struct ci_hdrc *ci) |
| { |
| if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL) |
| return; |
| |
| if (ci->phy) { |
| phy_power_off(ci->phy); |
| phy_exit(ci->phy); |
| } else { |
| usb_phy_shutdown(ci->usb_phy); |
| } |
| } |
| |
| /** |
| * ci_usb_phy_init: initialize phy according to different phy type |
| * @ci: the controller |
| * |
| * This function returns an error code if usb_phy_init has failed |
| */ |
| static int ci_usb_phy_init(struct ci_hdrc *ci) |
| { |
| int ret; |
| |
| if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL) |
| return 0; |
| |
| switch (ci->platdata->phy_mode) { |
| case USBPHY_INTERFACE_MODE_UTMI: |
| case USBPHY_INTERFACE_MODE_UTMIW: |
| case USBPHY_INTERFACE_MODE_HSIC: |
| ret = _ci_usb_phy_init(ci); |
| if (!ret) |
| hw_wait_phy_stable(); |
| else |
| return ret; |
| hw_phymode_configure(ci); |
| break; |
| case USBPHY_INTERFACE_MODE_ULPI: |
| case USBPHY_INTERFACE_MODE_SERIAL: |
| hw_phymode_configure(ci); |
| ret = _ci_usb_phy_init(ci); |
| if (ret) |
| return ret; |
| break; |
| default: |
| ret = _ci_usb_phy_init(ci); |
| if (!ret) |
| hw_wait_phy_stable(); |
| } |
| |
| return ret; |
| } |
| |
| |
| /** |
| * ci_platform_configure: do controller configure |
| * @ci: the controller |
| * |
| */ |
| void ci_platform_configure(struct ci_hdrc *ci) |
| { |
| bool is_device_mode, is_host_mode; |
| |
| is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC; |
| is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC; |
| |
| if (is_device_mode) { |
| phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE); |
| |
| if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING) |
| hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, |
| USBMODE_CI_SDIS); |
| } |
| |
| if (is_host_mode) { |
| phy_set_mode(ci->phy, PHY_MODE_USB_HOST); |
| |
| if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING) |
| hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, |
| USBMODE_CI_SDIS); |
| } |
| |
| if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { |
| if (ci->hw_bank.lpm) |
| hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC); |
| else |
| hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); |
| } |
| |
| if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA) |
| hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA); |
| |
| hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16); |
| |
| if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST) |
| hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK, |
| ci->platdata->ahb_burst_config); |
| |
| /* override burst size, take effect only when ahb_burst_config is 0 */ |
| if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) { |
| if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST) |
| hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK, |
| ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK)); |
| |
| if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST) |
| hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK, |
| ci->platdata->rx_burst_size); |
| } |
| } |
| |
| /** |
| * hw_controller_reset: do controller reset |
| * @ci: the controller |
| * |
| * This function returns an error code |
| */ |
| int hw_controller_reset(struct ci_hdrc *ci) |
| { |
| int count = 0; |
| |
| hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); |
| while (hw_read(ci, OP_USBCMD, USBCMD_RST)) { |
| udelay(10); |
| if (count++ > 1000) |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * hw_device_reset: resets chip (execute without interruption) |
| * @ci: the controller |
| * |
| * This function returns an error code |
| */ |
| int hw_device_reset(struct ci_hdrc *ci) |
| { |
| int ret; |
| |
| /* should flush & stop before reset */ |
| hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); |
| hw_write(ci, OP_USBCMD, USBCMD_RS, 0); |
| |
| ret = hw_controller_reset(ci); |
| if (ret) { |
| dev_err(ci->dev, "error resetting controller, ret=%d\n", ret); |
| return ret; |
| } |
| |
| if (ci->platdata->notify_event) { |
| ret = ci->platdata->notify_event(ci, |
| CI_HDRC_CONTROLLER_RESET_EVENT); |
| if (ret) |
| return ret; |
| } |
| |
| /* USBMODE should be configured step by step */ |
| hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); |
| hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC); |
| /* HW >= 2.3 */ |
| hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); |
| |
| if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { |
| pr_err("cannot enter in %s device mode", ci_role(ci)->name); |
| pr_err("lpm = %i", ci->hw_bank.lpm); |
| return -ENODEV; |
| } |
| |
| ci_platform_configure(ci); |
| |
| return 0; |
| } |
| |
| static irqreturn_t ci_irq(int irq, void *data) |
| { |
| struct ci_hdrc *ci = data; |
| irqreturn_t ret = IRQ_NONE; |
| u32 otgsc = 0; |
| |
| if (ci->in_lpm) { |
| disable_irq_nosync(irq); |
| ci->wakeup_int = true; |
| pm_runtime_get(ci->dev); |
| return IRQ_HANDLED; |
| } |
| |
| if (ci->is_otg) { |
| otgsc = hw_read_otgsc(ci, ~0); |
| if (ci_otg_is_fsm_mode(ci)) { |
| ret = ci_otg_fsm_irq(ci); |
| if (ret == IRQ_HANDLED) |
| return ret; |
| } |
| } |
| |
| /* |
| * Handle id change interrupt, it indicates device/host function |
| * switch. |
| */ |
| if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { |
| ci->id_event = true; |
| /* Clear ID change irq status */ |
| hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); |
| ci_otg_queue_work(ci); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Handle vbus change interrupt, it indicates device connection |
| * and disconnection events. |
| */ |
| if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { |
| ci->vbus_glitch_check_event = true; |
| /* Clear BSV irq */ |
| hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); |
| ci_otg_queue_work(ci); |
| return IRQ_HANDLED; |
| } |
| |
| /* Handle device/host interrupt */ |
| if (ci->role != CI_ROLE_END) |
| ret = ci_role(ci)->irq(ci); |
| |
| return ret; |
| } |
| |
| static int ci_cable_notifier(struct notifier_block *nb, unsigned long event, |
| void *ptr) |
| { |
| struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb); |
| struct ci_hdrc *ci = cbl->ci; |
| |
| cbl->connected = event; |
| cbl->changed = true; |
| |
| ci_irq(ci->irq, ci); |
| return NOTIFY_DONE; |
| } |
| |
| static int ci_get_platdata(struct device *dev, |
| struct ci_hdrc_platform_data *platdata) |
| { |
| struct extcon_dev *ext_vbus, *ext_id; |
| struct ci_hdrc_cable *cable; |
| int ret; |
| |
| if (!platdata->phy_mode) |
| platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); |
| |
| if (!platdata->dr_mode) |
| platdata->dr_mode = usb_get_dr_mode(dev); |
| |
| if (platdata->dr_mode == USB_DR_MODE_UNKNOWN) |
| platdata->dr_mode = USB_DR_MODE_OTG; |
| |
| if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) { |
| /* Get the vbus regulator */ |
| platdata->reg_vbus = devm_regulator_get(dev, "vbus"); |
| if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { |
| return -EPROBE_DEFER; |
| } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { |
| /* no vbus regulator is needed */ |
| platdata->reg_vbus = NULL; |
| } else if (IS_ERR(platdata->reg_vbus)) { |
| dev_err(dev, "Getting regulator error: %ld\n", |
| PTR_ERR(platdata->reg_vbus)); |
| return PTR_ERR(platdata->reg_vbus); |
| } |
| /* Get TPL support */ |
| if (!platdata->tpl_support) |
| platdata->tpl_support = |
| of_usb_host_tpl_support(dev->of_node); |
| } |
| |
| if (platdata->dr_mode == USB_DR_MODE_OTG) { |
| /* We can support HNP and SRP of OTG 2.0 */ |
| platdata->ci_otg_caps.otg_rev = 0x0200; |
| platdata->ci_otg_caps.hnp_support = true; |
| platdata->ci_otg_caps.srp_support = true; |
| |
| /* Update otg capabilities by DT properties */ |
| ret = of_usb_update_otg_caps(dev->of_node, |
| &platdata->ci_otg_caps); |
| if (ret) |
| return ret; |
| } |
| |
| if (usb_get_maximum_speed(dev) == USB_SPEED_FULL) |
| platdata->flags |= CI_HDRC_FORCE_FULLSPEED; |
| |
| of_property_read_u32(dev->of_node, "phy-clkgate-delay-us", |
| &platdata->phy_clkgate_delay_us); |
| |
| platdata->itc_setting = 1; |
| |
| of_property_read_u32(dev->of_node, "itc-setting", |
| &platdata->itc_setting); |
| |
| ret = of_property_read_u32(dev->of_node, "ahb-burst-config", |
| &platdata->ahb_burst_config); |
| if (!ret) { |
| platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST; |
| } else if (ret != -EINVAL) { |
| dev_err(dev, "failed to get ahb-burst-config\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword", |
| &platdata->tx_burst_size); |
| if (!ret) { |
| platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST; |
| } else if (ret != -EINVAL) { |
| dev_err(dev, "failed to get tx-burst-size-dword\n"); |
| return ret; |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword", |
| &platdata->rx_burst_size); |
| if (!ret) { |
| platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST; |
| } else if (ret != -EINVAL) { |
| dev_err(dev, "failed to get rx-burst-size-dword\n"); |
| return ret; |
| } |
| |
| if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL)) |
| platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA; |
| |
| /* "imx-usb-charger-detection is legacy compatible */ |
| if (of_find_property(dev->of_node, "phy-charger-detection", NULL) || |
| of_find_property(dev->of_node, "imx-usb-charger-detection", |
| NULL)) |
| platdata->flags |= CI_HDRC_PHY_CHARGER_DETECTION; |
| |
| ext_id = ERR_PTR(-ENODEV); |
| ext_vbus = ERR_PTR(-ENODEV); |
| if (of_property_read_bool(dev->of_node, "extcon")) { |
| /* Each one of them is not mandatory */ |
| ext_vbus = extcon_get_edev_by_phandle(dev, 0); |
| if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) |
| return PTR_ERR(ext_vbus); |
| |
| ext_id = extcon_get_edev_by_phandle(dev, 1); |
| if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) |
| return PTR_ERR(ext_id); |
| } |
| |
| cable = &platdata->vbus_extcon; |
| cable->nb.notifier_call = ci_cable_notifier; |
| cable->edev = ext_vbus; |
| |
| if (!IS_ERR(ext_vbus)) { |
| ret = extcon_get_state(cable->edev, EXTCON_USB); |
| if (ret) |
| cable->connected = true; |
| else |
| cable->connected = false; |
| } |
| |
| cable = &platdata->id_extcon; |
| cable->nb.notifier_call = ci_cable_notifier; |
| cable->edev = ext_id; |
| |
| if (!IS_ERR(ext_id)) { |
| ret = extcon_get_state(cable->edev, EXTCON_USB_HOST); |
| if (ret) |
| cable->connected = true; |
| else |
| cable->connected = false; |
| } |
| return 0; |
| } |
| |
| static int ci_extcon_register(struct ci_hdrc *ci) |
| { |
| struct ci_hdrc_cable *id, *vbus; |
| int ret; |
| |
| id = &ci->platdata->id_extcon; |
| id->ci = ci; |
| if (!IS_ERR_OR_NULL(id->edev)) { |
| ret = devm_extcon_register_notifier(ci->dev, id->edev, |
| EXTCON_USB_HOST, &id->nb); |
| if (ret < 0) { |
| dev_err(ci->dev, "register ID failed\n"); |
| return ret; |
| } |
| } |
| |
| vbus = &ci->platdata->vbus_extcon; |
| vbus->ci = ci; |
| if (!IS_ERR_OR_NULL(vbus->edev)) { |
| ret = devm_extcon_register_notifier(ci->dev, vbus->edev, |
| EXTCON_USB, &vbus->nb); |
| if (ret < 0) { |
| dev_err(ci->dev, "register VBUS failed\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static DEFINE_IDA(ci_ida); |
| |
| struct platform_device *ci_hdrc_add_device(struct device *dev, |
| struct resource *res, int nres, |
| struct ci_hdrc_platform_data *platdata) |
| { |
| struct platform_device *pdev; |
| int id, ret; |
| |
| ret = ci_get_platdata(dev, platdata); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); |
| if (id < 0) |
| return ERR_PTR(id); |
| |
| pdev = platform_device_alloc("ci_hdrc", id); |
| if (!pdev) { |
| ret = -ENOMEM; |
| goto put_id; |
| } |
| |
| pdev->dev.parent = dev; |
| |
| ret = platform_device_add_resources(pdev, res, nres); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add(pdev); |
| if (ret) |
| goto err; |
| |
| return pdev; |
| |
| err: |
| platform_device_put(pdev); |
| put_id: |
| ida_simple_remove(&ci_ida, id); |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(ci_hdrc_add_device); |
| |
| void ci_hdrc_remove_device(struct platform_device *pdev) |
| { |
| int id = pdev->id; |
| platform_device_unregister(pdev); |
| ida_simple_remove(&ci_ida, id); |
| } |
| EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); |
| |
| /** |
| * ci_hdrc_query_available_role: get runtime available operation mode |
| * |
| * The glue layer can get current operation mode (host/peripheral/otg) |
| * This function should be called after ci core device has created. |
| * |
| * @pdev: the platform device of ci core. |
| * |
| * Return USB_DR_MODE_XXX. |
| */ |
| enum usb_dr_mode ci_hdrc_query_available_role(struct platform_device *pdev) |
| { |
| struct ci_hdrc *ci = platform_get_drvdata(pdev); |
| |
| if (!ci) |
| return USB_DR_MODE_UNKNOWN; |
| if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) |
| return USB_DR_MODE_OTG; |
| else if (ci->roles[CI_ROLE_HOST]) |
| return USB_DR_MODE_HOST; |
| else if (ci->roles[CI_ROLE_GADGET]) |
| return USB_DR_MODE_PERIPHERAL; |
| else |
| return USB_DR_MODE_UNKNOWN; |
| } |
| EXPORT_SYMBOL_GPL(ci_hdrc_query_available_role); |
| |
| static inline void ci_role_destroy(struct ci_hdrc *ci) |
| { |
| if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) |
| ci_hdrc_otg_destroy(ci); |
| ci_hdrc_gadget_destroy(ci); |
| ci_hdrc_host_destroy(ci); |
| } |
| |
| static void ci_get_otg_capable(struct ci_hdrc *ci) |
| { |
| if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) |
| ci->is_otg = false; |
| else |
| ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, |
| DCCPARAMS_DC | DCCPARAMS_HC) |
| == (DCCPARAMS_DC | DCCPARAMS_HC)); |
| if (ci->is_otg) { |
| dev_dbg(ci->dev, "It is OTG capable controller\n"); |
| /* Disable and clear all OTG irq */ |
| hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, |
| OTGSC_INT_STATUS_BITS); |
| } |
| } |
| |
| static ssize_t ci_role_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| |
| if (ci->role != CI_ROLE_END) |
| return sprintf(buf, "%s\n", ci_role(ci)->name); |
| |
| return 0; |
| } |
| |
| static ssize_t ci_role_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t n) |
| { |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| enum ci_role role; |
| int ret; |
| |
| if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) { |
| dev_warn(dev, "Current configuration is not dual-role, quit\n"); |
| return -EPERM; |
| } |
| |
| for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++) |
| if (!strncmp(buf, ci->roles[role]->name, |
| strlen(ci->roles[role]->name))) |
| break; |
| |
| if (role == CI_ROLE_END || role == ci->role) |
| return -EINVAL; |
| |
| pm_runtime_get_sync(dev); |
| disable_irq(ci->irq); |
| ci_role_stop(ci); |
| ret = ci_role_start(ci, role); |
| if (!ret && ci->role == CI_ROLE_GADGET) |
| ci_handle_vbus_change(ci); |
| enable_irq(ci->irq); |
| pm_runtime_put_sync(dev); |
| |
| return (ret == 0) ? n : ret; |
| } |
| static DEVICE_ATTR(role, 0644, ci_role_show, ci_role_store); |
| |
| static struct attribute *ci_attrs[] = { |
| &dev_attr_role.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group ci_attr_group = { |
| .attrs = ci_attrs, |
| }; |
| |
| static enum ci_role ci_get_role(struct ci_hdrc *ci) |
| { |
| if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { |
| if (ci->is_otg) { |
| hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); |
| return ci_otg_role(ci); |
| } else { |
| /* |
| * If the controller is not OTG capable, but support |
| * role switch, the defalt role is gadget, and the |
| * user can switch it through debugfs. |
| */ |
| return CI_ROLE_GADGET; |
| } |
| } else { |
| return ci->roles[CI_ROLE_HOST] |
| ? CI_ROLE_HOST |
| : CI_ROLE_GADGET; |
| } |
| } |
| |
| static void ci_start_new_role(struct ci_hdrc *ci) |
| { |
| enum ci_role role = ci_get_role(ci); |
| |
| if (ci->role != role) { |
| ci_handle_id_switch(ci); |
| } else if (role == CI_ROLE_GADGET) { |
| if (ci->vbus_active) |
| usb_gadget_vbus_disconnect(&ci->gadget); |
| ci_handle_vbus_connected(ci); |
| } |
| } |
| |
| static void ci_power_lost_work(struct work_struct *work) |
| { |
| struct ci_hdrc *ci = container_of(work, struct ci_hdrc, |
| power_lost_work); |
| |
| disable_irq_nosync(ci->irq); |
| pm_runtime_get_sync(ci->dev); |
| if (!ci_otg_is_fsm_mode(ci)) |
| ci_start_new_role(ci); |
| else |
| ci_hdrc_otg_fsm_restart(ci); |
| pm_runtime_put_sync(ci->dev); |
| enable_irq(ci->irq); |
| } |
| |
| static int ci_hdrc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ci_hdrc *ci; |
| struct resource *res; |
| void __iomem *base; |
| int ret; |
| enum usb_dr_mode dr_mode; |
| |
| if (!dev_get_platdata(dev)) { |
| dev_err(dev, "platform data missing\n"); |
| return -ENODEV; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); |
| if (!ci) |
| return -ENOMEM; |
| |
| spin_lock_init(&ci->lock); |
| ci->dev = dev; |
| ci->platdata = dev_get_platdata(dev); |
| ci->imx28_write_fix = !!(ci->platdata->flags & |
| CI_HDRC_IMX28_WRITE_FIX); |
| ci->supports_runtime_pm = !!(ci->platdata->flags & |
| CI_HDRC_SUPPORTS_RUNTIME_PM); |
| platform_set_drvdata(pdev, ci); |
| |
| ret = hw_device_init(ci, base); |
| if (ret < 0) { |
| dev_err(dev, "can't initialize hardware\n"); |
| return -ENODEV; |
| } |
| |
| ret = ci_ulpi_init(ci); |
| if (ret) |
| return ret; |
| |
| if (ci->platdata->phy) { |
| ci->phy = ci->platdata->phy; |
| } else if (ci->platdata->usb_phy) { |
| ci->usb_phy = ci->platdata->usb_phy; |
| } else { |
| ci->phy = devm_phy_get(dev->parent, "usb-phy"); |
| ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2); |
| |
| /* if both generic PHY and USB PHY layers aren't enabled */ |
| if (PTR_ERR(ci->phy) == -ENOSYS && |
| PTR_ERR(ci->usb_phy) == -ENXIO) { |
| ret = -ENXIO; |
| goto ulpi_exit; |
| } |
| |
| if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) { |
| ret = -EPROBE_DEFER; |
| goto ulpi_exit; |
| } |
| |
| if (IS_ERR(ci->phy)) |
| ci->phy = NULL; |
| else if (IS_ERR(ci->usb_phy)) |
| ci->usb_phy = NULL; |
| } |
| |
| ret = ci_usb_phy_init(ci); |
| if (ret) { |
| dev_err(dev, "unable to init phy: %d\n", ret); |
| return ret; |
| } |
| |
| ci->hw_bank.phys = res->start; |
| |
| ci->irq = platform_get_irq(pdev, 0); |
| if (ci->irq < 0) { |
| dev_err(dev, "missing IRQ\n"); |
| ret = ci->irq; |
| goto deinit_phy; |
| } |
| |
| ci_get_otg_capable(ci); |
| |
| dr_mode = ci->platdata->dr_mode; |
| /* initialize role(s) before the interrupt is requested */ |
| if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { |
| ret = ci_hdrc_host_init(ci); |
| if (ret) { |
| if (ret == -ENXIO) |
| dev_info(dev, "doesn't support host\n"); |
| else |
| goto deinit_phy; |
| } |
| } |
| |
| if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { |
| ret = ci_hdrc_gadget_init(ci); |
| if (ret) { |
| if (ret == -ENXIO) |
| dev_info(dev, "doesn't support gadget\n"); |
| else |
| goto deinit_host; |
| } |
| } |
| |
| if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { |
| dev_err(dev, "no supported roles\n"); |
| ret = -ENODEV; |
| goto deinit_gadget; |
| } |
| |
| if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { |
| ret = ci_hdrc_otg_init(ci); |
| if (ret) { |
| dev_err(dev, "init otg fails, ret = %d\n", ret); |
| goto deinit_gadget; |
| } |
| } |
| |
| ci->role = ci_get_role(ci); |
| /* only update vbus status for peripheral */ |
| if (ci->role == CI_ROLE_GADGET) { |
| /* Let DP pull down if it isn't currently */ |
| hw_write(ci, OP_USBCMD, USBCMD_RS, 0); |
| ci_handle_vbus_connected(ci); |
| } |
| |
| if (!ci_otg_is_fsm_mode(ci)) { |
| ret = ci_role_start(ci, ci->role); |
| if (ret) { |
| dev_err(dev, "can't start %s role\n", |
| ci_role(ci)->name); |
| goto stop; |
| } |
| } |
| |
| ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED, |
| ci->platdata->name, ci); |
| if (ret) |
| goto stop; |
| |
| ret = ci_extcon_register(ci); |
| if (ret) |
| goto stop; |
| |
| if (ci->supports_runtime_pm) { |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); |
| pm_runtime_mark_last_busy(ci->dev); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| } |
| |
| if (ci_otg_is_fsm_mode(ci)) |
| ci_hdrc_otg_fsm_start(ci); |
| |
| device_set_wakeup_capable(&pdev->dev, true); |
| |
| mutex_init(&ci->mutex); |
| |
| ret = dbg_create_files(ci); |
| if (ret) |
| goto stop; |
| |
| ret = sysfs_create_group(&dev->kobj, &ci_attr_group); |
| if (ret) |
| goto remove_debug; |
| |
| /* Init workqueue for controller power lost handling */ |
| ci->power_lost_wq = create_freezable_workqueue("ci_power_lost"); |
| if (!ci->power_lost_wq) { |
| dev_err(ci->dev, "can't create power_lost workqueue\n"); |
| goto remove_sys_group; |
| } |
| |
| INIT_WORK(&ci->power_lost_work, ci_power_lost_work); |
| |
| return 0; |
| |
| remove_sys_group: |
| sysfs_remove_group(&ci->dev->kobj, &ci_attr_group); |
| remove_debug: |
| dbg_remove_files(ci); |
| stop: |
| if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) |
| ci_hdrc_otg_destroy(ci); |
| deinit_gadget: |
| ci_hdrc_gadget_destroy(ci); |
| deinit_host: |
| ci_hdrc_host_destroy(ci); |
| deinit_phy: |
| ci_usb_phy_exit(ci); |
| ulpi_exit: |
| ci_ulpi_exit(ci); |
| |
| return ret; |
| } |
| |
| static int ci_hdrc_remove(struct platform_device *pdev) |
| { |
| struct ci_hdrc *ci = platform_get_drvdata(pdev); |
| |
| if (ci->supports_runtime_pm) { |
| pm_runtime_get_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_put_noidle(&pdev->dev); |
| } |
| |
| flush_workqueue(ci->power_lost_wq); |
| destroy_workqueue(ci->power_lost_wq); |
| dbg_remove_files(ci); |
| sysfs_remove_group(&ci->dev->kobj, &ci_attr_group); |
| ci_role_destroy(ci); |
| ci_hdrc_enter_lpm(ci, true); |
| ci_usb_phy_exit(ci); |
| ci_ulpi_exit(ci); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| /* Prepare wakeup by SRP before suspend */ |
| static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci) |
| { |
| if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && |
| !hw_read_otgsc(ci, OTGSC_ID)) { |
| hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, |
| PORTSC_PP); |
| hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN, |
| PORTSC_WKCN); |
| } |
| } |
| |
| /* Handle SRP when wakeup by data pulse */ |
| static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci) |
| { |
| if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && |
| (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) { |
| if (!hw_read_otgsc(ci, OTGSC_ID)) |
| otg_add_timer(&ci->fsm, A_DP_END); |
| else |
| ci->fsm.id = 1; |
| } |
| } |
| |
| static void ci_controller_suspend(struct ci_hdrc *ci) |
| { |
| disable_irq(ci->irq); |
| ci_hdrc_enter_lpm(ci, true); |
| if (ci->platdata->phy_clkgate_delay_us) |
| usleep_range(ci->platdata->phy_clkgate_delay_us, |
| ci->platdata->phy_clkgate_delay_us + 50); |
| usb_phy_set_suspend(ci->usb_phy, 1); |
| ci->in_lpm = true; |
| enable_irq(ci->irq); |
| } |
| |
| /* |
| * Handle the wakeup interrupt triggered by extcon connector |
| * We need to call ci_irq again for extcon since the first |
| * interrupt (wakeup int) only let the controller be out of |
| * low power mode, but not handle any interrupts. |
| */ |
| static void ci_extcon_wakeup_int(struct ci_hdrc *ci) |
| { |
| struct ci_hdrc_cable *cable_id, *cable_vbus; |
| u32 otgsc = hw_read_otgsc(ci, ~0); |
| |
| cable_id = &ci->platdata->id_extcon; |
| cable_vbus = &ci->platdata->vbus_extcon; |
| |
| if (!IS_ERR(cable_id->edev) && ci->is_otg && |
| (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) |
| ci_irq(ci->irq, ci); |
| |
| if (!IS_ERR(cable_vbus->edev) && ci->is_otg && |
| (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) |
| ci_irq(ci->irq, ci); |
| } |
| |
| static int ci_controller_resume(struct device *dev) |
| { |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| int ret; |
| |
| dev_dbg(dev, "at %s\n", __func__); |
| |
| if (!ci->in_lpm) |
| return 0; |
| |
| ci_hdrc_enter_lpm(ci, false); |
| |
| ret = ci_ulpi_resume(ci); |
| if (ret) |
| return ret; |
| |
| if (ci->usb_phy) { |
| usb_phy_set_suspend(ci->usb_phy, 0); |
| usb_phy_set_wakeup(ci->usb_phy, false); |
| hw_wait_phy_stable(); |
| } |
| |
| ci->in_lpm = false; |
| if (ci->wakeup_int) { |
| ci->wakeup_int = false; |
| pm_runtime_mark_last_busy(ci->dev); |
| pm_runtime_put_autosuspend(ci->dev); |
| enable_irq(ci->irq); |
| if (ci_otg_is_fsm_mode(ci)) |
| ci_otg_fsm_wakeup_by_srp(ci); |
| ci_extcon_wakeup_int(ci); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int ci_suspend(struct device *dev) |
| { |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| |
| flush_workqueue(ci->power_lost_wq); |
| if (ci->wq) |
| flush_workqueue(ci->wq); |
| /* |
| * Controller needs to be active during suspend, otherwise the core |
| * may run resume when the parent is at suspend if other driver's |
| * suspend fails, it occurs before parent's suspend has not started, |
| * but the core suspend has finished. |
| */ |
| if (ci->in_lpm) |
| pm_runtime_resume(dev); |
| |
| if (ci->in_lpm) { |
| WARN_ON(1); |
| return 0; |
| } |
| |
| /* Extra routine per role before system suspend */ |
| if (ci->role != CI_ROLE_END && ci_role(ci)->suspend) |
| ci_role(ci)->suspend(ci); |
| |
| if (device_may_wakeup(dev)) { |
| if (ci_otg_is_fsm_mode(ci)) |
| ci_otg_fsm_suspend_for_srp(ci); |
| |
| usb_phy_set_wakeup(ci->usb_phy, true); |
| enable_irq_wake(ci->irq); |
| } |
| |
| ci_controller_suspend(ci); |
| |
| return 0; |
| } |
| |
| static int ci_resume(struct device *dev) |
| { |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| bool power_lost = false; |
| u32 sample_reg_val; |
| int ret; |
| |
| /* Check if controller resume from power lost */ |
| sample_reg_val = hw_read(ci, OP_ENDPTLISTADDR, ~0); |
| if (sample_reg_val == 0) |
| power_lost = true; |
| else if (sample_reg_val == 0xFFFFFFFF) |
| /* Restore value 0 if it was set for power lost check */ |
| hw_write(ci, OP_ENDPTLISTADDR, ~0, 0); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(ci->irq); |
| |
| ret = ci_controller_resume(dev); |
| if (ret) |
| return ret; |
| |
| if (power_lost) { |
| /* shutdown and re-init for phy */ |
| ci_usb_phy_exit(ci); |
| ci_usb_phy_init(ci); |
| } |
| |
| /* Extra routine per role after system resume */ |
| if (ci->role != CI_ROLE_END && ci_role(ci)->resume) |
| ci_role(ci)->resume(ci, power_lost); |
| |
| if (power_lost) |
| queue_work(ci->power_lost_wq, &ci->power_lost_work); |
| |
| if (ci->supports_runtime_pm) { |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static int ci_runtime_suspend(struct device *dev) |
| { |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "at %s\n", __func__); |
| |
| if (ci->in_lpm) |
| return 0; |
| |
| if (ci_otg_is_fsm_mode(ci)) |
| ci_otg_fsm_suspend_for_srp(ci); |
| |
| usb_phy_set_wakeup(ci->usb_phy, true); |
| ci_controller_suspend(ci); |
| |
| return 0; |
| } |
| |
| static int ci_runtime_resume(struct device *dev) |
| { |
| return ci_controller_resume(dev); |
| } |
| |
| #endif /* CONFIG_PM */ |
| static const struct dev_pm_ops ci_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume) |
| SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL) |
| }; |
| |
| static struct platform_driver ci_hdrc_driver = { |
| .probe = ci_hdrc_probe, |
| .remove = ci_hdrc_remove, |
| .driver = { |
| .name = "ci_hdrc", |
| .pm = &ci_pm_ops, |
| }, |
| }; |
| |
| static int __init ci_hdrc_platform_register(void) |
| { |
| ci_hdrc_host_driver_init(); |
| return platform_driver_register(&ci_hdrc_driver); |
| } |
| module_init(ci_hdrc_platform_register); |
| |
| static void __exit ci_hdrc_platform_unregister(void) |
| { |
| platform_driver_unregister(&ci_hdrc_driver); |
| } |
| module_exit(ci_hdrc_platform_unregister); |
| |
| MODULE_ALIAS("platform:ci_hdrc"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>"); |
| MODULE_DESCRIPTION("ChipIdea HDRC Driver"); |