| /* |
| * Copyright 2014 Google, Inc |
| * Author: Alexandru M Stan <amstan@chromium.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include "clk.h" |
| |
| struct rockchip_mmc_clock { |
| struct clk_hw hw; |
| void __iomem *reg; |
| int id; |
| int shift; |
| }; |
| |
| #define to_mmc_clock(_hw) container_of(_hw, struct rockchip_mmc_clock, hw) |
| |
| #define RK3288_MMC_CLKGEN_DIV 2 |
| |
| static unsigned long rockchip_mmc_recalc(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return parent_rate / RK3288_MMC_CLKGEN_DIV; |
| } |
| |
| #define ROCKCHIP_MMC_DELAY_SEL BIT(10) |
| #define ROCKCHIP_MMC_DEGREE_MASK 0x3 |
| #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2 |
| #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET) |
| |
| #define PSECS_PER_SEC 1000000000000LL |
| |
| /* |
| * Each fine delay is between 44ps-77ps. Assume each fine delay is 60ps to |
| * simplify calculations. So 45degs could be anywhere between 33deg and 57.8deg. |
| */ |
| #define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60 |
| |
| static int rockchip_mmc_get_phase(struct clk_hw *hw) |
| { |
| struct rockchip_mmc_clock *mmc_clock = to_mmc_clock(hw); |
| unsigned long rate = clk_get_rate(hw->clk); |
| u32 raw_value; |
| u16 degrees; |
| u32 delay_num = 0; |
| |
| /* See the comment for rockchip_mmc_set_phase below */ |
| if (!rate) { |
| pr_err("%s: invalid clk rate\n", __func__); |
| return -EINVAL; |
| } |
| |
| raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift); |
| |
| degrees = (raw_value & ROCKCHIP_MMC_DEGREE_MASK) * 90; |
| |
| if (raw_value & ROCKCHIP_MMC_DELAY_SEL) { |
| /* degrees/delaynum * 10000 */ |
| unsigned long factor = (ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10) * |
| 36 * (rate / 1000000); |
| |
| delay_num = (raw_value & ROCKCHIP_MMC_DELAYNUM_MASK); |
| delay_num >>= ROCKCHIP_MMC_DELAYNUM_OFFSET; |
| degrees += DIV_ROUND_CLOSEST(delay_num * factor, 10000); |
| } |
| |
| return degrees % 360; |
| } |
| |
| static int rockchip_mmc_set_phase(struct clk_hw *hw, int degrees) |
| { |
| struct rockchip_mmc_clock *mmc_clock = to_mmc_clock(hw); |
| unsigned long rate = clk_get_rate(hw->clk); |
| u8 nineties, remainder; |
| u8 delay_num; |
| u32 raw_value; |
| u32 delay; |
| |
| /* |
| * The below calculation is based on the output clock from |
| * MMC host to the card, which expects the phase clock inherits |
| * the clock rate from its parent, namely the output clock |
| * provider of MMC host. However, things may go wrong if |
| * (1) It is orphan. |
| * (2) It is assigned to the wrong parent. |
| * |
| * This check help debug the case (1), which seems to be the |
| * most likely problem we often face and which makes it difficult |
| * for people to debug unstable mmc tuning results. |
| */ |
| if (!rate) { |
| pr_err("%s: invalid clk rate\n", __func__); |
| return -EINVAL; |
| } |
| |
| nineties = degrees / 90; |
| remainder = (degrees % 90); |
| |
| /* |
| * Due to the inexact nature of the "fine" delay, we might |
| * actually go non-monotonic. We don't go _too_ monotonic |
| * though, so we should be OK. Here are options of how we may |
| * work: |
| * |
| * Ideally we end up with: |
| * 1.0, 2.0, ..., 69.0, 70.0, ..., 89.0, 90.0 |
| * |
| * On one extreme (if delay is actually 44ps): |
| * .73, 1.5, ..., 50.6, 51.3, ..., 65.3, 90.0 |
| * The other (if delay is actually 77ps): |
| * 1.3, 2.6, ..., 88.6. 89.8, ..., 114.0, 90 |
| * |
| * It's possible we might make a delay that is up to 25 |
| * degrees off from what we think we're making. That's OK |
| * though because we should be REALLY far from any bad range. |
| */ |
| |
| /* |
| * Convert to delay; do a little extra work to make sure we |
| * don't overflow 32-bit / 64-bit numbers. |
| */ |
| delay = 10000000; /* PSECS_PER_SEC / 10000 / 10 */ |
| delay *= remainder; |
| delay = DIV_ROUND_CLOSEST(delay, |
| (rate / 1000) * 36 * |
| (ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10)); |
| |
| delay_num = (u8) min_t(u32, delay, 255); |
| |
| raw_value = delay_num ? ROCKCHIP_MMC_DELAY_SEL : 0; |
| raw_value |= delay_num << ROCKCHIP_MMC_DELAYNUM_OFFSET; |
| raw_value |= nineties; |
| writel(HIWORD_UPDATE(raw_value, 0x07ff, mmc_clock->shift), |
| mmc_clock->reg); |
| |
| pr_debug("%s->set_phase(%d) delay_nums=%u reg[0x%p]=0x%03x actual_degrees=%d\n", |
| clk_hw_get_name(hw), degrees, delay_num, |
| mmc_clock->reg, raw_value>>(mmc_clock->shift), |
| rockchip_mmc_get_phase(hw) |
| ); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops rockchip_mmc_clk_ops = { |
| .recalc_rate = rockchip_mmc_recalc, |
| .get_phase = rockchip_mmc_get_phase, |
| .set_phase = rockchip_mmc_set_phase, |
| }; |
| |
| struct clk *rockchip_clk_register_mmc(const char *name, |
| const char *const *parent_names, u8 num_parents, |
| void __iomem *reg, int shift) |
| { |
| struct clk_init_data init; |
| struct rockchip_mmc_clock *mmc_clock; |
| struct clk *clk; |
| |
| mmc_clock = kmalloc(sizeof(*mmc_clock), GFP_KERNEL); |
| if (!mmc_clock) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.flags = 0; |
| init.num_parents = num_parents; |
| init.parent_names = parent_names; |
| init.ops = &rockchip_mmc_clk_ops; |
| |
| mmc_clock->hw.init = &init; |
| mmc_clock->reg = reg; |
| mmc_clock->shift = shift; |
| |
| clk = clk_register(NULL, &mmc_clock->hw); |
| if (IS_ERR(clk)) |
| kfree(mmc_clock); |
| |
| return clk; |
| } |