blob: 050ed02bb33af38a8c85436f325c73282c123ac5 [file] [log] [blame]
USB xHCI controllers
Required properties:
- compatible: should be one or more of
- "generic-xhci" for generic XHCI device
- "marvell,armada3700-xhci" for Armada 37xx SoCs
- "marvell,armada-375-xhci" for Armada 375 SoCs
- "marvell,armada-380-xhci" for Armada 38x SoCs
- "renesas,xhci-r8a7790" for r8a7790 SoC
- "renesas,xhci-r8a7791" for r8a7791 SoC
- "renesas,xhci-r8a7793" for r8a7793 SoC
- "renesas,xhci-r8a7795" for r8a7795 SoC
- "renesas,xhci-r8a7796" for r8a7796 SoC
- "renesas,xhci-r8a77965" for r8a77965 SoC
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device
- "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
- "xhci-platform" (deprecated)
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: should contain address and length of the standard XHCI
register set for the device.
- interrupts: one XHCI interrupt should be described here.
Optional properties:
- clocks: reference to a clock
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- usb3-resume-missing-cas: set if the CAS(Cold Attach Status) may lose in case
device plugged in while system sleep.
Example:
usb@f0931000 {
compatible = "generic-xhci";
reg = <0xf0931000 0x8c8>;
interrupts = <0x0 0x4e 0x0>;
};