Google Git
Sign in
coral / linux-imx / 82ad414c9204ca37241a6ce1ea4b5cc0ef0a3217 / . / drivers / net / phy / tja110x.c
blob: 58c2618f28e4e4c6d4936f152ec09fce927c6d9d [file] [log] [blame]
/*
* Copyright 2017-2018 NXP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/of_mdio.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/delay.h>
#include "tja110x.h"
/* load driver for TJA1102p1. It needs to be ensured,
* that no other mdio device with phy id 0 is present
*/
#define CONFIG_TJA1102_FIX
/* listen for NETDEV_GOING_DOWN and NETDEV_UP of the ethernet interface,
* that controls the mdio bus to which the nxp phy(s) is/are connected to.
* Polling is stopped/started accordingly, to prevent mdio read timeouts
* This fix requires MDIO_INTERFACE_NAME and MII_BUS_NAME to be set
*/
#define NETDEV_NOTIFICATION_FIX
/* Name of the eth interface, that controlls the mdio bus,
* to which the phy(s) is/are connected to
*/
#ifndef MDIO_INTERFACE_NAME
#define MDIO_INTERFACE_NAME "eth0"
#endif
/* Name of the mdio bus,
* to which the phy(s) is/are connected to
*/
#ifndef MII_BUS_NAME
#define MII_BUS_NAME "fec_enet_mii_bus"
#endif
#define TJA110X_REFCLK_IN (1 << 0)
/* Variable can be modified via parameter passed at load time
* A nonzero value indicates that we should operate in managed mode
*/
static int managed_mode;
/* Permission: do not show up in sysfs */
module_param(managed_mode, int, 0000);
MODULE_PARM_DESC(managed_mode, "Use PHY in managed or autonomous mode");
/* A nonzero value indicates that we should not poll the interrupt register */
static int no_poll;
/* Permission: do not show up in sysfs */
module_param(no_poll, int, 0000);
MODULE_PARM_DESC(no_poll, "Do not poll the interrupt register");
/* Detemines the level of verbosity for debug messages */
static int verbosity;
/* Permission: do not show up in sysfs */
module_param(verbosity, int, 0000);
MODULE_PARM_DESC(verbosity, "Set verbosity level");
/* Called to initialize the PHY,
* including after a reset
*/
static int nxp_config_init(struct phy_device *phydev)
{
struct nxp_specific_data *nxp_specific = phydev->priv;
int reg_val;
int reg_name, reg_value = -1, reg_mask;
int err;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "initializing phy %x\n", phydev->mdio.addr);
/* set features of the PHY */
reg_val = phy_read(phydev, MII_BMSR);
if (reg_val < 0)
goto phy_read_error;
if (reg_val & BMSR_ESTATEN) {
reg_val = phy_read(phydev, MII_ESTATUS);
if (reg_val < 0)
goto phy_read_error;
if (reg_val & ESTATUS_100T1_FULL) {
/* update phydev to include the supported features */
phydev->supported |= SUPPORTED_100BASET1_FULL;
phydev->advertising |= ADVERTISED_100BASET1_FULL;
}
}
/* enable configuration register access once during initialization */
err = phy_configure_bit(phydev, MII_ECTRL, ECTRL_CONFIG_EN, 1);
if (err < 0)
goto phy_configure_error;
/* -enter managed or autonomous mode,
* depending on the value of managed_mode.
* The register layout changed between TJA1100 and TJA1102
* -configure LED mode (only tja1100 has LEDs)
*/
switch (phydev->phy_id & NXP_PHY_ID_MASK) {
case NXP_PHY_ID_TJA1100:
reg_name = MII_CFG1;
reg_value = TJA1100_CFG1_LED_EN | CFG1_LED_LINKUP;
if (!managed_mode)
reg_value |= TJA1100_CFG1_AUTO_OP;
reg_mask = TJA1100_CFG1_AUTO_OP |
TJA1100_CFG1_LED_EN | TJA1100_CFG1_LED_MODE;
if (nxp_specific->quirks & TJA110X_REFCLK_IN) {
reg_value |= TJA1100_CFG1_MII_MODE_REFCLK_IN;
reg_mask |= CFG1_MII_MODE;
}
break;
case NXP_PHY_ID_TJA1101:
/* fall through */
case NXP_PHY_ID_TJA1102P0:
reg_name = MII_COMMCFG;
reg_value = 0;
if (!managed_mode)
reg_value |= COMMCFG_AUTO_OP;
reg_mask = COMMCFG_AUTO_OP;
break;
case NXP_PHY_ID_TJA1102P1:
/* does not have an auto_op bit */
break;
default:
goto unsupported_phy_error;
}
/* only configure the phys that have an auto_op bit or leds */
if (reg_value != -1) {
err = phy_configure_bits(phydev, reg_name, reg_mask, reg_value);
if (err < 0)
goto phy_configure_error;
}
/* enable sleep confirm */
err = phy_configure_bit(phydev, MII_CFG1, CFG1_SLEEP_CONFIRM, 1);
if (err < 0)
goto phy_configure_error;
/* set sleep request timeout to 16ms */
err = phy_configure_bits(phydev, MII_CFG2, CFG2_SLEEP_REQUEST_TO,
SLEEP_REQUEST_TO_16MS);
if (err < 0)
goto phy_configure_error;
/* if in managed mode:
* -go to normal mode, if currently in standby
* (PHY might be pinstrapped to managed mode,
* and therefore not in normal mode yet)
* -enable link control
*/
if (managed_mode) {
reg_val = phy_read(phydev, MII_ECTRL);
if (reg_val < 0)
goto phy_read_error;
/* mask power mode bits */
reg_val &= ECTRL_POWER_MODE;
if (reg_val == POWER_MODE_STANDBY) {
err = phydev->drv->resume(phydev);
if (err < 0)
goto phy_pmode_transit_error;
}
set_link_control(phydev, 1);
}
/* clear any pending interrupts */
phydev->drv->ack_interrupt(phydev);
phydev->irq = PHY_POLL;
/* enable all interrupts */
phydev->interrupts = PHY_INTERRUPT_ENABLED;
phydev->drv->config_intr(phydev);
/* Setup and queue a polling function */
if (!no_poll) {
setup_polling(phydev);
start_polling(phydev);
}
return 0;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: config_init failed\n");
return reg_val;
phy_pmode_transit_error:
dev_err(&phydev->mdio.dev, "pmode error: config_init failed\n");
return err;
phy_configure_error:
dev_err(&phydev->mdio.dev, "read/write error: config_init failed\n");
return err;
unsupported_phy_error:
dev_err(&phydev->mdio.dev, "unsupported phy, config_init failed\n");
return -1;
}
/* Called during discovery.
* Used to set up device-specific structures
*/
static int nxp_probe(struct phy_device *phydev)
{
int err;
struct device *dev = &phydev->mdio.dev;
struct nxp_specific_data *nxp_specific;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "probing PHY %x\n", phydev->mdio.addr);
nxp_specific = kzalloc(sizeof(*nxp_specific), GFP_KERNEL);
if (!nxp_specific)
goto phy_allocation_error;
if (of_property_read_bool(dev->of_node, "tja110x,refclk_in"))
nxp_specific->quirks |= TJA110X_REFCLK_IN;
nxp_specific->is_master = get_master_cfg(phydev);
nxp_specific->is_polling = 0;
nxp_specific->is_poll_setup = 0;
phydev->priv = nxp_specific;
/* register sysfs files */
err = sysfs_create_group(&phydev->mdio.dev.kobj, &nxp_attribute_group);
if (err)
goto register_sysfs_error;
return 0;
/* error handling */
register_sysfs_error:
dev_err(&phydev->mdio.dev, "sysfs file creation failed\n");
return -ENOMEM;
phy_allocation_error:
dev_err(&phydev->mdio.dev, "memory allocation for priv data failed\n");
return -ENOMEM;
}
/* Clears up any memory, removes sysfs nodes and cancels polling */
static void nxp_remove(struct phy_device *phydev)
{
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "removing PHY %x\n", phydev->mdio.addr);
/* unregister sysfs files */
sysfs_remove_group(&phydev->mdio.dev.kobj, &nxp_attribute_group);
if (!no_poll)
stop_polling(phydev);
/* free custom data struct */
if (phydev->priv) {
kzfree(phydev->priv);
phydev->priv = NULL;
}
}
/* Clears any pending interrupts */
static int nxp_ack_interrupt(struct phy_device *phydev)
{
int err;
if (verbosity > 3)
dev_alert(&phydev->mdio.dev, "acknowledging interrupt of PHY %x\n",
phydev->mdio.addr);
/* interrupts are acknowledged by reading, ie. clearing MII_INTSRC */
err = phy_read(phydev, MII_INTSRC);
if (err < 0)
goto phy_read_error;
return 0;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: ack_interrupt failed\n");
return err;
}
/* Checks if the PHY generated an interrupt */
static int nxp_did_interrupt(struct phy_device *phydev)
{
int reg_val;
reg_val = phy_read(phydev, MII_INTSRC);
if (reg_val < 0)
goto phy_read_error;
/* return bitmask of possible interrupts bits that are set */
return (reg_val & INTERRUPT_ALL);
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: did_interrupt failed\n");
return 0;
}
/* Enables or disables interrupts */
static int nxp_config_intr(struct phy_device *phydev)
{
int err;
int interrupts;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"configuring interrupts of phy %x to [%x]\n",
phydev->mdio.addr, phydev->interrupts);
interrupts = phydev->interrupts;
if (interrupts == PHY_INTERRUPT_ENABLED) {
/* enable all interrupts
* PHY_INTERRUPT_ENABLED macro does not interfere with any
* of the possible interrupt source macros
*/
err = phy_write(phydev, MII_INTMASK, INTERRUPT_ALL);
} else if (interrupts == PHY_INTERRUPT_DISABLED) {
/* disable all interrupts */
err = phy_write(phydev, MII_INTMASK, INTERRUPT_NONE);
} else {
/* interpret value of interrupts as interrupt mask */
err = phy_write(phydev, MII_INTMASK, interrupts);
}
if (err < 0)
goto phy_write_error;
return 0;
phy_write_error:
dev_err(&phydev->mdio.dev, "write error: config_intr failed\n");
return err;
}
/* interrupt handler for pwon interrupts */
static inline void handle_pwon_interrupt(struct phy_device *phydev)
{
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"reinitializing phy [%08x] @ [%04x] after powerdown\n",
phydev->phy_id, phydev->mdio.addr);
/* after a power down reinitialize the phy */
phydev->drv->config_init(phydev);
/* update master/slave setting */
((struct nxp_specific_data *)phydev->priv)->is_master =
get_master_cfg(phydev);
/* For TJA1102, pwon interrupts only exist on TJA1102p0
* Find TJA1102p1 to reinitialize it too
*/
if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P0) {
int p1_addr = phydev->mdio.addr + 1;
struct phy_device *phydevp1;
if (p1_addr >= PHY_MAX_ADDR)
return;
phydevp1 = mdiobus_get_phy(phydev->mdio.bus, p1_addr);
if (!phydevp1)
return;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"reinit phy [%08x] @ [%04x] after pDown\n",
phydevp1->phy_id, phydevp1->mdio.addr);
phydevp1->drv->config_init(phydevp1);
((struct nxp_specific_data *)phydevp1->priv)->is_master =
get_master_cfg(phydevp1);
}
}
/* interrupt handler for undervoltage recovery interrupts */
static inline void handle_uvr_interrupt(struct phy_device *phydev)
{
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"resuming phy [%08x] @ [%04x] after uvr\n",
phydev->phy_id, phydev->mdio.addr);
phydev->drv->resume(phydev);
/* For TJA1102, UVR interrupts only exist on TJA1102p0
* Find TJA1102p1 to resume it too
*/
if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P0) {
int p1_addr = phydev->mdio.addr + 1;
struct phy_device *phydevp1;
if (p1_addr >= PHY_MAX_ADDR)
return;
phydevp1 = mdiobus_get_phy(phydev->mdio.bus, p1_addr);
if (!phydevp1)
return;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"resuming phy [%08x] @ [%04x] after uvr\n",
phydevp1->phy_id, phydevp1->mdio.addr);
phydevp1->drv->resume(phydevp1);
}
}
/* polling function, that is executed regularly to handle phy interrupts */
static void poll(struct work_struct *work)
{
int interrupts, interrupt_mask;
struct phy_device *phydev =
container_of(work, struct phy_device, phy_queue);
/* query phy for interrupts */
interrupts = nxp_did_interrupt(phydev);
/* mask out all disabled interrupts */
interrupt_mask = phy_read(phydev, MII_INTMASK);
if (verbosity > 4)
dev_alert(&phydev->mdio.dev,
"interrupt on phy [%08x]@[%04x], mask [%08x], ISR [%08x]\n",
phydev->phy_id, phydev->mdio.addr, interrupt_mask, interrupts);
interrupts &= interrupt_mask;
/* handle interrupts
* - reinitialize after power down
* - resume PHY after an external WAKEUP was received
* - resume PHY after an undervoltage recovery
* - adjust state on link changes
* - check for some PHY errors
*/
/* SMI not disabled and read was successful */
if ((interrupts != 0xffff) && (interrupt_mask >= 0)) {
if (interrupts & INTERRUPT_PWON)
handle_pwon_interrupt(phydev);
else if (interrupts & INTERRUPT_UV_RECOVERY)
handle_uvr_interrupt(phydev);
else if (interrupts & INTERRUPT_WAKEUP)
phydev->drv->resume(phydev);
/* warnings */
if (interrupts & INTERRUPT_PHY_INIT_FAIL)
dev_err(&phydev->mdio.dev, "PHY initialization failed\n");
if (interrupts & INTERRUPT_LINK_STATUS_FAIL)
dev_err(&phydev->mdio.dev, "PHY link status failed\n");
if (interrupts & INTERRUPT_SYM_ERR)
dev_err(&phydev->mdio.dev, "PHY symbol error detected\n");
if (interrupts & INTERRUPT_SNR_WARNING)
dev_err(&phydev->mdio.dev, "PHY SNR warning\n");
if (interrupts & INTERRUPT_CONTROL_ERROR)
dev_err(&phydev->mdio.dev, "PHY control error\n");
if (interrupts & INTERRUPT_UV_ERR)
dev_err(&phydev->mdio.dev, "PHY undervoltage error\n");
if (interrupts & INTERRUPT_TEMP_ERROR)
dev_err(&phydev->mdio.dev, "PHY temperature error\n");
/* Notify state machine about any link changes */
if (interrupts & INTERRUPT_LINK_STATUS_UP ||
interrupts & INTERRUPT_LINK_STATUS_FAIL) {
mutex_lock(&phydev->lock);
/* only indicate a link change to state machine
* if phydev is attached to a netdevice
*/
if (phydev->attached_dev)
phydev->state = PHY_CHANGELINK;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"state was %d, now going %s\n", phydev->state,
(interrupts & INTERRUPT_LINK_STATUS_UP) ?
"UP":"DOWN");
phydev->link =
(interrupts & INTERRUPT_LINK_STATUS_UP) ? 1 : 0;
mutex_unlock(&phydev->lock);
}
}
/* requeue poll function */
msleep(POLL_PAUSE); /* msleep is non-blocking */
queue_work(system_power_efficient_wq, &phydev->phy_queue);
}
static void setup_polling(struct phy_device *phydev)
{
/*
* The phy_queue is normally used to schedule the interrupt handler
* from interrupt context after an irq has been received.
* Here it is repurposed as scheduling mechanism for the poll function
*/
struct nxp_specific_data *priv = phydev->priv;
if (!priv->is_poll_setup) {
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"initialize polling for PHY %x\n", phydev->mdio.addr);
cancel_work_sync(&phydev->phy_queue);
INIT_WORK(&phydev->phy_queue, poll);
priv->is_poll_setup = 1;
}
}
static void start_polling(struct phy_device *phydev)
{
struct nxp_specific_data *priv = phydev->priv;
if (priv->is_poll_setup && !priv->is_polling) {
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "start polling PHY %x\n",
phydev->mdio.addr);
/* schedule execution of polling function */
queue_work(system_power_efficient_wq, &phydev->phy_queue);
priv->is_polling = 1;
}
}
static void stop_polling(struct phy_device *phydev)
{
struct nxp_specific_data *priv = phydev->priv;
if (priv->is_poll_setup && priv->is_polling) {
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "stop polling PHY %x\n",
phydev->mdio.addr);
/* cancel scheduled work */
cancel_work_sync(&phydev->phy_queue);
priv->is_polling = 0;
}
}
/* helper function, waits until a given condition is met
*
* The function delays until the part of the register at reg_addr,
* defined by reg_mask equals cond, or a timeout (timeout*DELAY_LENGTH) occurs.
* @return 0 if condition is met, <0 if timeout or read error occurred
*/
static int wait_on_condition(struct phy_device *phydev, int reg_addr,
int reg_mask, int cond, int timeout)
{
int reg_val;
if (verbosity > 3)
dev_alert(&phydev->mdio.dev, "waiting on condidition\n");
do {
udelay(DELAY_LENGTH);
reg_val = phy_read(phydev, reg_addr);
if (reg_val < 0)
return reg_val;
} while ((reg_val & reg_mask) != cond && --timeout);
if (verbosity > 3)
dev_alert(&phydev->mdio.dev, "%s",
(timeout?"condidition met\n" : "timeout occured\n"));
if (timeout)
return 0;
return -1;
}
/* helper function, enables or disables link control */
static void set_link_control(struct phy_device *phydev, int enable_link_control)
{
int err;
err = phy_configure_bit(phydev, MII_ECTRL, ECTRL_LINK_CONTROL,
enable_link_control);
if (err < 0)
goto phy_configure_error;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"set link ctrl to [%d] for phy %x completed\n",
enable_link_control, phydev->mdio.addr);
return;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: setting link control failed\n");
return;
}
/* Helper function, configures phy as master or slave
* @param phydev the phy to be configured
* @param setMaster ==0: set to slave
* !=0: set to master
* @return 0 on success, error code on failure
*/
static int set_master_cfg(struct phy_device *phydev, int setMaster)
{
int err;
/* disable link control prior to master/slave cfg */
set_link_control(phydev, 0);
/* write configuration to the phy */
err = phy_configure_bit(phydev, MII_CFG1, CFG1_MASTER_SLAVE, setMaster);
if (err < 0)
goto phy_configure_error;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "set master cfg completed\n");
/* enable link control after master/slave cfg was set */
set_link_control(phydev, 1);
return 0;
/* error handling */
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: set_master_cfg failed\n");
return err;
}
/* Helper function, reads master/slave configuration of phy
* @param phydev the phy to be read
*
* @return ==0: is slave
* !=0: is master
*/
static int get_master_cfg(struct phy_device *phydev)
{
int reg_val;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "getting master cfg PHY %x\n",
phydev->mdio.addr);
/* read the current configuration */
reg_val = phy_read(phydev, MII_CFG1);
if (reg_val < 0)
goto phy_read_error;
return reg_val & CFG1_MASTER_SLAVE;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: get_master_cfg failed\n");
return reg_val;
}
/* retrieves the link status from COMMSTAT register */
static int get_link_status(struct phy_device *phydev)
{
int reg_val;
reg_val = phy_read(phydev, MII_COMMSTAT);
if (reg_val < 0)
goto phy_read_error;
if (verbosity > 0) {
if (reg_val & COMMSTAT_LOC_RCVR_STATUS)
dev_alert(&phydev->mdio.dev, "local receiver OK\n");
else
dev_alert(&phydev->mdio.dev, "local receiver NOT OK\n");
}
return reg_val & COMMSTAT_LINK_UP;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: get_link_status failed\n");
return reg_val;
}
/* issues a sleep request, if in managed mode */
static int nxp_sleep(struct phy_device *phydev)
{
int err;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "PHY %x going to sleep\n",
phydev->mdio.addr);
if (!managed_mode)
goto phy_auto_op_error;
/* clear power mode bits and set them to sleep request */
err = phy_configure_bits(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_SLEEPREQUEST);
if (err < 0)
goto phy_configure_error;
if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P0 ||
(phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P1 ||
(phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1101) {
/* tja1102 and tja1102 have an extra sleep state indicator
* in ECTRL.
* If transition is successful this can be detected immediately,
* without waiting for SLEEP_REQUEST_TO to pass
*/
err = wait_on_condition(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_SLEEP, SLEEP_REQUEST_TO);
if (err < 0)
goto phy_transition_error;
} else if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1100) {
/* TJA1100 disables SMI when entering SLEEP
* The SMI bus is pulled up, that means every
* SMI read will return 0xffff.
* We can use this to check if PHY entered SLEEP.
*/
err = wait_on_condition(phydev, MII_ECTRL,
0xffff, 0xffff, SLEEP_REQUEST_TO);
if (err < 0)
goto phy_transition_error;
}
return 0;
/* error handling */
phy_auto_op_error:
dev_info(&phydev->mdio.dev, "phy is in auto mode: sleep not possible\n");
return 0;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: entering sleep failed\n");
return err;
phy_transition_error:
dev_err(&phydev->mdio.dev, "sleep request timed out\n");
return err;
}
/* wakes up the phy from sleep mode */
static int wakeup_from_sleep(struct phy_device *phydev)
{
int err;
unsigned long wakeup_delay;
struct nxp_specific_data *nxp_specific = phydev->priv;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "PHY %x waking up from sleep\n",
phydev->mdio.addr);
if (!managed_mode)
goto phy_auto_op_error;
/* set power mode bits to standby mode */
err = phy_configure_bits(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_STANDBY);
if (err < 0)
goto phy_configure_error;
/* wait until power mode transition is completed */
err = wait_on_condition(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_STANDBY, POWER_MODE_TIMEOUT);
if (err < 0)
goto phy_transition_error;
/* set power mode bits to normal mode */
err = phy_configure_bits(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_NORMAL);
if (err < 0)
goto phy_configure_error;
if (!(nxp_specific->quirks & TJA110X_REFCLK_IN)) {
/* wait until the PLL is locked, indicating a completed transition */
err = wait_on_condition(phydev, MII_GENSTAT, GENSTAT_PLL_LOCKED,
GENSTAT_PLL_LOCKED, POWER_MODE_TIMEOUT);
if (err < 0)
goto phy_transition_error;
}
/* if phy is configured as slave, also send a wakeup request
* to master
*/
if (!((struct nxp_specific_data *)phydev->priv)->is_master) {
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"Phy is slave, send wakeup request master\n");
/* link control must be reset for wake request */
set_link_control(phydev, 0);
/* start sending bus wakeup signal */
err = phy_configure_bit(phydev, MII_ECTRL,
ECTRL_WAKE_REQUEST, 1);
if (err < 0)
goto phy_configure_error;
switch (phydev->phy_id & NXP_PHY_ID_MASK) {
case NXP_PHY_ID_TJA1100:
wakeup_delay = TJA100_WAKE_REQUEST_TIMEOUT_US;
break;
case NXP_PHY_ID_TJA1102P0:
/* fall through */
case NXP_PHY_ID_TJA1101:
/* fall through */
case NXP_PHY_ID_TJA1102P1:
wakeup_delay = TJA102_WAKE_REQUEST_TIMEOUT_US;
break;
default:
goto unsupported_phy_error;
}
/* wait until link partner is guranteed to be awake */
usleep_range(wakeup_delay, wakeup_delay + 1U);
/* stop sending bus wakeup signal */
err = phy_configure_bit(phydev, MII_ECTRL,
ECTRL_WAKE_REQUEST, 0);
if (err < 0)
goto phy_configure_error;
}
/* reenable link control */
set_link_control(phydev, 1);
return 0;
/* error handling */
phy_auto_op_error:
dev_dbg(&phydev->mdio.dev, "phy is in auto mode: wakeup not possible\n");
return 0;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: wakeup failed\n");
return err;
phy_transition_error:
dev_err(&phydev->mdio.dev, "power mode transition failed\n");
return err;
unsupported_phy_error:
dev_err(&phydev->mdio.dev, "unsupported phy, wakeup failed\n");
return -1;
}
/* send a wakeup request to the link partner */
static int wakeup_from_normal(struct phy_device *phydev)
{
int err;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev,
"PHY %x waking up from normal (send wur)\n", phydev->mdio.addr);
/* start sending bus wakeup signal */
err = phy_configure_bit(phydev, MII_ECTRL, ECTRL_WAKE_REQUEST, 1);
if (err < 0)
goto phy_configure_error;
/* stop sending bus wakeup signal */
err = phy_configure_bit(phydev, MII_ECTRL, ECTRL_WAKE_REQUEST, 0);
if (err < 0)
goto phy_configure_error;
return 0;
/* error handling */
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: wakeup_from_normal failed\n");
return err;
}
/* wake up phy if is in sleep mode, send wakeup request if in normal mode */
static int nxp_wakeup(struct phy_device *phydev)
{
int reg_val;
int err = 0;
reg_val = phy_read(phydev, MII_ECTRL);
if (reg_val < 0)
goto phy_read_error;
reg_val &= ECTRL_POWER_MODE;
switch (reg_val) {
case POWER_MODE_NORMAL:
err = wakeup_from_normal(phydev);
break;
case POWER_MODE_SLEEP:
err = wakeup_from_sleep(phydev);
break;
case 0xffff & ECTRL_POWER_MODE:
/* TJA1100 disables SMI during sleep */
goto phy_SMI_disabled;
default:
break;
}
if (err < 0)
goto phy_configure_error;
return 0;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: nxp_wakeup failed\n");
return reg_val;
phy_SMI_disabled:
dev_err(&phydev->mdio.dev, "SMI interface disabled, cannot be woken up\n");
return 0;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: wakeup_from_normal failed\n");
return err;
}
/* power mode transition to standby */
static int nxp_suspend(struct phy_device *phydev)
{
int err = 0;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "suspending PHY %x\n", phydev->mdio.addr);
if (!managed_mode)
goto phy_auto_op_error;
mutex_lock(&phydev->lock);
/* set BMCR_PDOWN bit in MII_BMCR register */
err = phy_configure_bit(phydev, MII_BMCR, BMCR_PDOWN, 1);
if (err < 0)
dev_err(&phydev->mdio.dev, "phy r/w error: resume failed\n");
mutex_unlock(&phydev->lock);
return err;
phy_auto_op_error:
dev_dbg(&phydev->mdio.dev, "phy is in auto mode: suspend not possible\n");
return 0;
}
/* power mode transition from standby to normal */
static int nxp_resume(struct phy_device *phydev)
{
int err;
struct nxp_specific_data *nxp_specific = phydev->priv;
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "resuming PHY %x\n", phydev->mdio.addr);
/* clear BMCR_PDOWN bit in MII_BMCR register */
err = phy_configure_bit(phydev, MII_BMCR, BMCR_PDOWN, 0);
if (err < 0)
goto phy_configure_error;
/* transit to normal mode */
err = phy_configure_bits(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_NORMAL);
if (err < 0)
goto phy_configure_error;
/* wait until power mode transition is completed */
err = wait_on_condition(phydev, MII_ECTRL, ECTRL_POWER_MODE,
POWER_MODE_NORMAL, POWER_MODE_TIMEOUT);
if (err < 0)
goto phy_transition_error;
if (!(nxp_specific->quirks & TJA110X_REFCLK_IN)) {
/* wait until the PLL is locked, indicating a completed transition */
err = wait_on_condition(phydev, MII_GENSTAT, GENSTAT_PLL_LOCKED,
GENSTAT_PLL_LOCKED, POWER_MODE_TIMEOUT);
if (err < 0)
goto phy_pll_error;
}
/* reenable link control */
set_link_control(phydev, 1);
return 0;
/* error handling */
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: resume failed\n");
return err;
phy_transition_error:
dev_err(&phydev->mdio.dev, "power mode transition failed\n");
return err;
phy_pll_error:
dev_err(&phydev->mdio.dev, "Error: PLL is unstable and not locked\n");
return err;
}
/* Configures the autonegotiation capabilities */
static int nxp_config_aneg(struct phy_device *phydev)
{
if (verbosity > 0)
dev_alert(&phydev->mdio.dev, "configuring autoneg\n");
/* disable autoneg and manually configure speed, duplex, pause frames */
phydev->autoneg = 0;
phydev->speed = SPEED_100;
phydev->duplex = DUPLEX_FULL;
phydev->pause = 0;
phydev->asym_pause = 0;
return 0;
}
/* helper function, enters the test mode specified by tmode
* @return 0 if test mode was entered, <0 on read or write error
*/
static int enter_test_mode(struct phy_device *phydev, enum test_mode tmode)
{
int reg_val = -1;
int err;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "phy %x entering test mode: %d\n",
phydev->mdio.addr, tmode);
switch (tmode) {
case NO_TMODE:
reg_val = ECTRL_NO_TMODE;
break;
case TMODE1:
reg_val = ECTRL_TMODE1;
break;
case TMODE2:
reg_val = ECTRL_TMODE2;
break;
case TMODE3:
reg_val = ECTRL_TMODE3;
break;
case TMODE4:
reg_val = ECTRL_TMODE4;
break;
case TMODE5:
reg_val = ECTRL_TMODE5;
break;
case TMODE6:
reg_val = ECTRL_TMODE6;
break;
default:
break;
}
if (reg_val >= 0) {
/* set test mode bits accordingly */
err = phy_configure_bits(phydev, MII_ECTRL, ECTRL_TEST_MODE,
reg_val);
if (err < 0)
goto phy_configure_error;
}
return 0;
/* error handling */
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: setting test mode failed\n");
return err;
}
/* helper function, enables or disables loopback mode
* @return 0 if loopback mode was configured, <0 on read or write error
*/
static int set_loopback(struct phy_device *phydev, int enable_loopback)
{
int err;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "phy %x setting loopback: %d\n",
phydev->mdio.addr, enable_loopback);
err = phy_configure_bit(phydev, MII_BMCR, BMCR_LOOPBACK,
enable_loopback);
if (err < 0)
goto phy_configure_error;
return 0;
/* error handling */
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: configuring loopback failed\n");
return err;
}
/* helper function, enters the loopback mode specified by lmode
* @return 0 if loopback mode was entered, <0 on read or write error
*/
static int enter_loopback_mode(struct phy_device *phydev,
enum loopback_mode lmode)
{
int reg_val = -1;
int err;
/* disable link control prior to loopback cfg */
set_link_control(phydev, 0);
switch (lmode) {
case NO_LMODE:
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"phy %x disabling loopback mode\n", phydev->mdio.addr);
/* disable loopback */
err = set_loopback(phydev, 0);
if (err < 0)
goto phy_set_loopback_error;
break;
case INTERNAL_LMODE:
reg_val = ECTRL_INTERNAL_LMODE;
break;
case EXTERNAL_LMODE:
reg_val = ECTRL_EXTERNAL_LMODE;
break;
case REMOTE_LMODE:
reg_val = ECTRL_REMOTE_LMODE;
break;
default:
break;
}
if (reg_val >= 0) {
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "setting loopback mode %d\n",
lmode);
err = phy_configure_bits(phydev, MII_ECTRL,
ECTRL_LOOPBACK_MODE, reg_val);
if (err < 0)
goto phy_configure_error;
/* enable loopback */
err = set_loopback(phydev, 1);
if (err < 0)
goto phy_set_loopback_error;
}
/* enable link control after loopback cfg was set */
set_link_control(phydev, 1);
return 0;
/* error handling */
phy_set_loopback_error:
dev_err(&phydev->mdio.dev, "error: enable/disable loopback failed\n");
return err;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: setting loopback mode failed\n");
return err;
}
/* helper function, enters the led mode specified by lmode
* @return 0 if led mode was entered, <0 on read or write error
*/
static int enter_led_mode(struct phy_device *phydev, enum led_mode lmode)
{
int reg_val = -1;
int err;
switch (lmode) {
case NO_LED_MODE:
/* disable led */
err = phy_configure_bit(phydev, MII_CFG1,
TJA1100_CFG1_LED_EN, 0);
if (err < 0)
goto phy_configure_error;
break;
case LINKUP_LED_MODE:
reg_val = CFG1_LED_LINKUP;
break;
case FRAMEREC_LED_MODE:
reg_val = CFG1_LED_FRAMEREC;
break;
case SYMERR_LED_MODE:
reg_val = CFG1_LED_SYMERR;
break;
case CRSSIG_LED_MODE:
reg_val = CFG1_LED_CRSSIG;
break;
default:
break;
}
if (reg_val >= 0) {
err = phy_configure_bits(phydev, MII_CFG1,
TJA1100_CFG1_LED_MODE, reg_val);
if (err < 0)
goto phy_configure_error;
/* enable led */
err = phy_configure_bit(phydev, MII_CFG1,
TJA1100_CFG1_LED_EN, 1);
if (err < 0)
goto phy_configure_error;
}
return 0;
/* error handling */
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: setting led mode failed\n");
return err;
}
/* This function handles read accesses to the node 'master_cfg' in
* sysfs.
* Depending on current configuration of the phy, the node reads
* 'master' or 'slave'
*/
static ssize_t sysfs_get_master_cfg(struct device *dev,
struct device_attribute *attr, char *buf)
{
int is_master;
struct phy_device *phydev = to_phy_device(dev);
is_master = get_master_cfg(phydev);
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, "%s\n",
is_master ? "master" : "slave");
}
/* This function handles write accesses to the node 'master_cfg' in sysfs.
* Depending on the value written to it, the phy is configured as
* master or slave
*/
static ssize_t sysfs_set_master_cfg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err;
int setMaster;
struct phy_device *phydev = to_phy_device(dev);
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "setting master cfg PHY %x\n",
phydev->mdio.addr);
/* parse the buffer */
err = kstrtoint(buf, 10, &setMaster);
if (err < 0)
goto phy_parse_error;
/* write configuration to the phy */
err = set_master_cfg(phydev, setMaster);
if (err < 0)
goto phy_cfg_error;
/* update phydev */
((struct nxp_specific_data *)phydev->priv)->is_master = setMaster;
return count;
/* error handling */
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_set_master_cfg failed\n");
return err;
phy_cfg_error:
dev_err(&phydev->mdio.dev, "phy cfg error: sysfs_set_master_cfg failed\n");
return err;
}
/* This function handles read accesses to the node 'power_cfg' in sysfs.
* Reading the node returns the current power state
*/
static ssize_t sysfs_get_power_cfg(struct device *dev,
struct device_attribute *attr, char *buf)
{
int reg_val;
char *pmode;
struct phy_device *phydev = to_phy_device(dev);
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "getting power cfg\n");
reg_val = phy_read(phydev, MII_ECTRL);
if (reg_val < 0)
goto phy_read_error;
/* mask power mode bits */
reg_val &= ECTRL_POWER_MODE;
switch (reg_val) {
case POWER_MODE_NORMAL:
pmode = "POWER_MODE_NORMAL\n";
break;
case POWER_MODE_SLEEPREQUEST:
pmode = "POWER_MODE_SLEEPREQUEST\n";
break;
case POWER_MODE_SLEEP:
pmode = "POWER_MODE_SLEEP\n";
break;
case POWER_MODE_SILENT:
pmode = "POWER_MODE_SILENT\n";
break;
case POWER_MODE_STANDBY:
pmode = "POWER_MODE_STANDBY\n";
break;
case POWER_MODE_NOCHANGE:
pmode = "POWER_MODE_NOCHANGE\n";
break;
default:
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"unknown reg val is [%08x]\n", reg_val);
pmode = "unknown\n";
}
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, pmode);
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_power_cfg failed\n");
return reg_val;
}
/* This function handles write accesses to the node 'power_cfg' in
* sysfs.
* Depending on the value written to it, the phy enters a certain
* power state.
*/
static ssize_t sysfs_set_power_cfg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err;
int pmode;
struct phy_device *phydev = to_phy_device(dev);
/* parse the buffer */
err = kstrtoint(buf, 10, &pmode);
if (err < 0)
goto phy_parse_error;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "set pmode to %d\n", pmode);
switch (pmode) {
case 0:
err = phydev->drv->suspend(phydev);
break;
case 1:
err = phydev->drv->resume(phydev);
break;
case 2:
err = nxp_sleep(phydev);
break;
case 3:
err = nxp_wakeup(phydev);
break;
default:
break;
}
if (err)
goto phy_pmode_transit_error;
return count;
/* error handling */
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_set_power_cfg failed\n");
return err;
phy_pmode_transit_error:
dev_err(&phydev->mdio.dev, "pmode error: sysfs_set_power_cfg failed\n");
return err;
}
/* This function handles read accesses to the node 'loopback_cfg' in sysfs
* Reading the node returns the current loopback configuration
*/
static ssize_t sysfs_get_loopback_cfg(struct device *dev,
struct device_attribute *attr, char *buf)
{
int reg_val;
char *lmode;
struct phy_device *phydev = to_phy_device(dev);
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "getting loopback cfg\n");
reg_val = phy_read(phydev, MII_BMCR);
if (reg_val < 0)
goto phy_read_error;
if (reg_val & BMCR_LOOPBACK) {
/* loopback enabled */
reg_val = phy_read(phydev, MII_ECTRL);
if (reg_val < 0)
goto phy_read_error;
/* mask loopback mode bits */
reg_val &= ECTRL_LOOPBACK_MODE;
switch (reg_val) {
case ECTRL_INTERNAL_LMODE:
lmode = "INTERNAL_LOOPBACK\n";
break;
case ECTRL_EXTERNAL_LMODE:
lmode = "EXTERNAL_LOOPBACK\n";
break;
case ECTRL_REMOTE_LMODE:
lmode = "REMOTE_LOOPBACK\n";
break;
default:
lmode = "unknown\n";
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"unknown reg val is [%08x]\n", reg_val);
}
} else {
/* loopback disabled */
lmode = "LOOPBACK_DISABLED\n";
}
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, lmode);
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_loopback_cfg failed\n");
return reg_val;
}
/* This function handles write accesses to the node 'loopback_cfg'
* in sysfs.
* Depending on the value written to it, the phy enters a certain
* loopback state.
*/
static ssize_t sysfs_set_loopback_cfg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err;
int lmode;
struct phy_device *phydev = to_phy_device(dev);
if (!managed_mode)
goto phy_auto_op_error;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "setting loopback cfg PHY %x\n",
phydev->mdio.addr);
/* parse the buffer */
err = kstrtoint(buf, 10, &lmode);
if (err < 0)
goto phy_parse_error;
switch (lmode) {
case 0:
err = enter_loopback_mode(phydev, NO_LMODE);
if (!no_poll)
start_polling(phydev);
break;
case 1:
if (!no_poll)
stop_polling(phydev);
err = enter_loopback_mode(phydev, INTERNAL_LMODE);
break;
case 2:
if (!no_poll)
stop_polling(phydev);
err = enter_loopback_mode(phydev, EXTERNAL_LMODE);
break;
case 3:
if (!no_poll)
stop_polling(phydev);
err = enter_loopback_mode(phydev, REMOTE_LMODE);
break;
default:
break;
}
if (err)
goto phy_lmode_transit_error;
return count;
/* error handling */
phy_auto_op_error:
dev_info(&phydev->mdio.dev, "phy is in auto mode: loopback not available\n");
return count;
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_set_loopback_cfg failed\n");
return err;
phy_lmode_transit_error:
dev_err(&phydev->mdio.dev, "lmode error: sysfs_set_loopback_cfg failed\n");
return err;
}
/* This function handles read accesses to the node 'cable_test' in sysfs
* Reading the node executes a cable test and returns the result
*/
static ssize_t sysfs_get_cable_test(struct device *dev,
struct device_attribute *attr, char *buf)
{
int reg_val;
int err;
char *c_test_result;
struct phy_device *phydev = to_phy_device(dev);
if (!managed_mode)
goto phy_auto_op_error;
if (verbosity > 1)
dev_alert(&phydev->mdio.dev, "phy %x executing cable test\n",
phydev->mdio.addr);
/* disable link control prior to cable test */
set_link_control(phydev, 0);
/* execute a cable test */
err = phy_configure_bit(phydev, MII_ECTRL, ECTRL_CABLE_TEST, 1);
if (err < 0)
goto phy_configure_error;
/* wait until test is completed */
err = wait_on_condition(phydev, MII_ECTRL, ECTRL_CABLE_TEST,
0, CABLE_TEST_TIMEOUT);
if (err < 0)
goto phy_transition_error;
/* evaluate the test results */
reg_val = phy_read(phydev, MII_EXTERNAL_STATUS);
if (reg_val < 0)
goto phy_read_error;
if (reg_val & EXTSTAT_SHORT_DETECT)
c_test_result = "SHORT_DETECT\n";
else if (reg_val & EXTSTAT_OPEN_DETECT)
c_test_result = "OPEN_DETECT\n";
else
c_test_result = "NO_ERROR\n";
/* reenable link control after cable test */
set_link_control(phydev, 1);
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, c_test_result);
/* error handling */
phy_auto_op_error:
dev_info(&phydev->mdio.dev, "phy is in auto mode: cabletest not available\n");
return 0;
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_cable_test failed\n");
return reg_val;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: sysfs_get_cable_test failed\n");
return err;
phy_transition_error:
dev_err(&phydev->mdio.dev, "Timeout: cable test failed to finish in time\n");
return err;
}
/* This function handles read accesses to the node 'test_mode' in sysfs
* Reading the node returns the current test mode configuration
*/
static ssize_t sysfs_get_test_mode(struct device *dev,
struct device_attribute *attr, char *buf)
{
int reg_val;
char *tmode;
struct phy_device *phydev = to_phy_device(dev);
reg_val = phy_read(phydev, MII_ECTRL);
if (reg_val < 0)
goto phy_read_error;
/* mask test mode bits */
reg_val &= ECTRL_TEST_MODE;
switch (reg_val) {
case ECTRL_NO_TMODE:
tmode = "NO_TMODE\n";
break;
case ECTRL_TMODE1:
tmode = "TMODE1\n";
break;
case ECTRL_TMODE2:
tmode = "TMODE2\n";
break;
case ECTRL_TMODE3:
tmode = "TMODE3\n";
break;
case ECTRL_TMODE4:
tmode = "TMODE4\n";
break;
case ECTRL_TMODE5:
tmode = "TMODE5\n";
break;
case ECTRL_TMODE6:
tmode = "TMODE6\n";
break;
default:
tmode = "unknown\n";
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"unknown reg val is [%08x]\n", reg_val);
}
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, tmode);
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_test_mode failed\n");
return reg_val;
}
/* This function handles write accesses to the node 'test_mode' in sysfs
* Depending on the value written to it, the phy enters a certain test mode
*/
static ssize_t sysfs_set_test_mode(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err;
int tmode;
struct phy_device *phydev = to_phy_device(dev);
if (!managed_mode)
goto phy_auto_op_error;
/* parse the buffer */
err = kstrtoint(buf, 10, &tmode);
if (err < 0)
goto phy_parse_error;
switch (tmode) {
case 0:
err = enter_test_mode(phydev, NO_TMODE);
/* enable link control after exiting test */
set_link_control(phydev, 1);
break;
case 1:
/* disbale link control before entering test */
set_link_control(phydev, 0);
err = enter_test_mode(phydev, TMODE1);
break;
case 2:
/* disbale link control before entering test */
set_link_control(phydev, 0);
err = enter_test_mode(phydev, TMODE2);
break;
case 3:
/* disbale link control before entering test */
set_link_control(phydev, 0);
err = enter_test_mode(phydev, TMODE3);
break;
case 4:
/* disbale link control before entering test */
set_link_control(phydev, 0);
err = enter_test_mode(phydev, TMODE4);
break;
case 5:
/* disbale link control before entering test */
set_link_control(phydev, 0);
err = enter_test_mode(phydev, TMODE5);
break;
case 6:
/* disbale link control before entering test */
set_link_control(phydev, 0);
err = enter_test_mode(phydev, TMODE6);
break;
default:
break;
}
if (err)
goto phy_tmode_transit_error;
return count;
/* error handling */
phy_auto_op_error:
dev_info(&phydev->mdio.dev, "phy is in auto mode: testmodes not available\n");
return count;
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_get_test_mode failed\n");
return err;
phy_tmode_transit_error:
dev_err(&phydev->mdio.dev, "tmode error: sysfs_get_test_mode failed\n");
return err;
}
/* This function handles read accesses to the node 'led_cfg' in sysfs.
* Reading the node returns the current led configuration
*/
static ssize_t sysfs_get_led_cfg(struct device *dev,
struct device_attribute *attr, char *buf)
{
int reg_val;
char *lmode;
struct phy_device *phydev = to_phy_device(dev);
lmode = "DISABLED\n";
/* only TJA1100 has leds */
if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1100) {
reg_val = phy_read(phydev, MII_CFG1);
if (reg_val < 0)
goto phy_read_error;
if (reg_val & TJA1100_CFG1_LED_EN) {
/* mask led mode bits */
reg_val &= TJA1100_CFG1_LED_MODE;
switch (reg_val) {
case CFG1_LED_LINKUP:
lmode = "LINKUP\n";
break;
case CFG1_LED_FRAMEREC:
lmode = "FRAMEREC\n";
break;
case CFG1_LED_SYMERR:
lmode = "SYMERR\n";
break;
case CFG1_LED_CRSSIG:
lmode = "CRSSIG\n";
break;
default:
lmode = "unknown\n";
if (verbosity > 1)
dev_alert(&phydev->mdio.dev,
"unknown reg val is [%08x]\n", reg_val);
}
}
}
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, lmode);
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_led_cfg failed\n");
return reg_val;
}
/* This function handles write accesses to the node 'led_cfg' in sysfs
* Depending on the value written to it, the led mode is configured
* accordingly.
*/
static ssize_t sysfs_set_led_cfg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err;
int lmode;
struct phy_device *phydev = to_phy_device(dev);
if ((phydev->phy_id & NXP_PHY_ID_MASK) != NXP_PHY_ID_TJA1100)
goto no_led_error;
/* parse the buffer */
err = kstrtoint(buf, 10, &lmode);
if (err < 0)
goto phy_parse_error;
switch (lmode) {
case 0:
err = enter_led_mode(phydev, NO_LED_MODE);
break;
case 1:
err = enter_led_mode(phydev, LINKUP_LED_MODE);
break;
case 2:
err = enter_led_mode(phydev, FRAMEREC_LED_MODE);
break;
case 3:
err = enter_led_mode(phydev, SYMERR_LED_MODE);
break;
case 4:
err = enter_led_mode(phydev, CRSSIG_LED_MODE);
break;
default:
break;
}
if (err)
goto phy_lmode_transit_error;
return count;
/* error handling */
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_set_led_cfg failed\n");
return err;
phy_lmode_transit_error:
dev_err(&phydev->mdio.dev, "lmode error: sysfs_set_led_cfg failed\n");
return err;
no_led_error:
dev_info(&phydev->mdio.dev, "phy has no led support\n");
return count;
}
/* This function handles read accesses to the node 'link_status' in sysfs
* Depending on current link status of the phy, the node reads
* 'up' or 'down'
*/
static ssize_t sysfs_get_link_status(struct device *dev,
struct device_attribute *attr, char *buf)
{
int linkup;
struct phy_device *phydev = to_phy_device(dev);
linkup = get_link_status(phydev);
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, "%s\n", linkup ? "up" : "down");
}
/* This function handles read accesses to the node 'wakeup_cfg' in sysfs
* Reading the node returns the current status of the bits
* FWDPHYLOC, REMWUPHY, LOCWUPHY, FWDPHYREM
*/
static ssize_t sysfs_get_wakeup_cfg(struct device *dev,
struct device_attribute *attr, char *buf)
{
int reg_val;
int fwdphyloc_en, remwuphy_en, locwuphy_en, fwdphyrem_en;
struct phy_device *phydev = to_phy_device(dev);
if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P0 ||
(phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P1 ||
(phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1101) {
reg_val = phy_read(phydev, MII_CFG1);
if (reg_val < 0)
goto phy_read_error;
fwdphyloc_en = 0;
remwuphy_en = 0;
locwuphy_en = 0;
fwdphyrem_en = 0;
if (reg_val & TJA1102_CFG1_FWDPHYLOC)
fwdphyloc_en = 1;
if (reg_val & CFG1_REMWUPHY)
remwuphy_en = 1;
if (reg_val & CFG1_LOCWUPHY)
locwuphy_en = 1;
if (reg_val & CFG1_FWDPHYREM)
fwdphyrem_en = 1;
} else if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1100) {
remwuphy_en = 1; /* not configurable, always enabled */
fwdphyloc_en = 0; /* not supported */
/* The status LED and WAKE input share a pin, so ultimately
* configuration depends on the hardware setup.
* If LED is disabled, we assume the pin is used for WAKE.
* In this case, the phy wakes up upon local wakeup event
* via the WAKE pin and also forwards it.
*/
reg_val = phy_read(phydev, MII_CFG1);
if (reg_val < 0)
goto phy_read_error;
if (reg_val & TJA1100_CFG1_LED_EN) {
locwuphy_en = 0;
fwdphyrem_en = 0;
} else {
locwuphy_en = 1;
fwdphyrem_en = 1;
}
} else {
goto unsupported_phy_error;
}
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE,
"fwdphyloc[%s], remwuphy[%s], locwuphy[%s], fwdphyrem[%s]\n",
(fwdphyloc_en ? "on" : "off"),
(remwuphy_en ? "on" : "off"),
(locwuphy_en ? "on" : "off"),
(fwdphyrem_en ? "on" : "off"));
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_wakeup_cfg failed\n");
return reg_val;
unsupported_phy_error:
dev_err(&phydev->mdio.dev, "unsupported phy, sysfs_get_wakeup_cfg failed\n");
return -1;
}
/* This function handles write accesses to the node 'wakeup_cfg' in sysfs
* Depending on the hexadecimal value written, the bits
* FWDPHYLOC, REMWUPHY, LOCWUPHY, FWDPHYREM are configured
*/
static ssize_t sysfs_set_wakeup_cfg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err, reg_val, reg_mask, wakeup_cfg;
struct phy_device *phydev = to_phy_device(dev);
/* parse the buffer */
err = kstrtoint(buf, 16, &wakeup_cfg);
if (err < 0)
goto phy_parse_error;
if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P0 ||
(phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P1 ||
(phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1101) {
reg_val = 0;
/* the first 4 bits of the supplied hexadecimal value
* are interpreted as the wakeup configuration
*/
if (wakeup_cfg & SYSFS_FWDPHYLOC)
reg_val |= TJA1102_CFG1_FWDPHYLOC;
if (wakeup_cfg & SYSFS_REMWUPHY)
reg_val |= CFG1_REMWUPHY;
if (wakeup_cfg & SYSFS_LOCWUPHY)
reg_val |= CFG1_LOCWUPHY;
if (wakeup_cfg & SYSFS_FWDPHYREM)
reg_val |= CFG1_FWDPHYREM;
reg_mask = (TJA1102_CFG1_FWDPHYLOC | CFG1_REMWUPHY |
CFG1_LOCWUPHY | CFG1_FWDPHYREM);
err = phy_configure_bits(phydev, MII_CFG1, reg_mask, reg_val);
if (err < 0)
goto phy_configure_error;
} else if ((phydev->phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1100) {
/* FWDPHYLOC MUST be off
* REMWUPHY MUST be on
* only LOCWUPHY and FWDPHYREM are configurable
* Possible configurations:
* - BOTH enabled (then led MUST be off)
* - BOTH disabled (then led CAN be on)
* all other configurations are invalid.
*
* Therefore valid values to write to sysfs are:
* - 2 (LOCWUPHY and FWDPHYREM off)
* - E (LOCWUPHY and FWDPHYREM on)
*/
if (((wakeup_cfg & SYSFS_LOCWUPHY) !=
(wakeup_cfg & SYSFS_FWDPHYREM)) ||
wakeup_cfg & SYSFS_FWDPHYLOC ||
!(wakeup_cfg & SYSFS_REMWUPHY)) {
dev_alert(&phydev->mdio.dev, "Invalid configuration\n");
} else if (wakeup_cfg & SYSFS_LOCWUPHY &&
wakeup_cfg & SYSFS_FWDPHYREM) {
err = enter_led_mode(phydev, NO_LED_MODE);
if (err)
goto phy_lmode_transit_error;
}
}
return count;
/* error handling */
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_set_wakeup_cfg failed\n");
return err;
phy_configure_error:
dev_err(&phydev->mdio.dev, "phy r/w error: sysfs_set_wakeup_cfg failed\n");
return err;
phy_lmode_transit_error:
dev_err(&phydev->mdio.dev, "lmode error: sysfs_set_wakeup_cfg failed\n");
return err;
}
/* This function handles read accesses to the node 'snr_wlimit_cfg' in sysfs.
* Reading the node returns the current snr warning limit.
*/
static ssize_t sysfs_get_snr_wlimit_cfg(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int reg_val;
char *snr_limit;
struct phy_device *phydev = to_phy_device(dev);
reg_val = phy_read(phydev, MII_CFG2);
if (reg_val < 0)
goto phy_read_error;
/* mask snr wlimit bits */
reg_val &= CFG2_SNR_WLIMIT;
switch (reg_val) {
case SNR_CLASS_NONE:
snr_limit = "no fail limit\n";
break;
case SNR_CLASS_A:
snr_limit = "CLASS_A\n";
break;
case SNR_CLASS_B:
snr_limit = "CLASS_B\n";
break;
case SNR_CLASS_C:
snr_limit = "CLASS_C\n";
break;
case SNR_CLASS_D:
snr_limit = "CLASS_D\n";
break;
case SNR_CLASS_E:
snr_limit = "CLASS_E\n";
break;
case SNR_CLASS_F:
snr_limit = "CLASS_F\n";
break;
case SNR_CLASS_G:
snr_limit = "CLASS_G\n";
break;
default:
snr_limit = "unknown\n";
}
/* write result into the buffer */
return scnprintf(buf, PAGE_SIZE, snr_limit);
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: sysfs_get_snr_wlimit_cfg failed\n");
return reg_val;
}
/* This function handles write accesses to the node 'snr_wlimit_cfg' in sysfs
* Depending on the value written to it, the snr warning limit is configured
* accordingly.
*/
static ssize_t sysfs_set_snr_wlimit_cfg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int err, snr_limit, reg_val;
struct phy_device *phydev = to_phy_device(dev);
/* parse the buffer */
err = kstrtoint(buf, 10, &snr_limit);
if (err < 0)
goto phy_parse_error;
switch (snr_limit) {
case 0:
reg_val = SNR_CLASS_NONE;
break;
case 1:
reg_val = SNR_CLASS_A;
break;
case 2:
reg_val = SNR_CLASS_B;
break;
case 3:
reg_val = SNR_CLASS_C;
break;
case 4:
reg_val = SNR_CLASS_D;
break;
case 5:
reg_val = SNR_CLASS_E;
break;
case 6:
reg_val = SNR_CLASS_F;
break;
case 7:
reg_val = SNR_CLASS_G;
break;
default:
reg_val = -1;
break;
}
if (reg_val != -1) {
err = phy_configure_bits(phydev, MII_CFG2,
CFG2_SNR_WLIMIT, reg_val);
if (err)
goto phy_configure_error;
}
return count;
/* error handling */
phy_parse_error:
dev_err(&phydev->mdio.dev, "parse error: sysfs_set_snr_wlimit_cfg failed\n");
return err;
phy_configure_error:
dev_err(&phydev->mdio.dev,
"phy r/w error: sysfs_set_snr_wlimit_cfg failed\n");
return err;
}
/* r/w access for everyone */
static DEVICE_ATTR(master_cfg, S_IWUSR | S_IRUSR,
sysfs_get_master_cfg, sysfs_set_master_cfg);
static DEVICE_ATTR(power_cfg, S_IWUSR | S_IRUSR,
sysfs_get_power_cfg, sysfs_set_power_cfg);
static DEVICE_ATTR(loopback_cfg, S_IWUSR | S_IRUSR,
sysfs_get_loopback_cfg, sysfs_set_loopback_cfg);
static DEVICE_ATTR(cable_test, S_IRUSR, sysfs_get_cable_test, NULL);
static DEVICE_ATTR(test_mode, S_IWUSR | S_IRUSR,
sysfs_get_test_mode, sysfs_set_test_mode);
static DEVICE_ATTR(led_cfg, S_IWUSR | S_IRUSR,
sysfs_get_led_cfg, sysfs_set_led_cfg);
static DEVICE_ATTR(link_status, S_IRUSR, sysfs_get_link_status, NULL);
static DEVICE_ATTR(wakeup_cfg, S_IWUSR | S_IRUSR,
sysfs_get_wakeup_cfg, sysfs_set_wakeup_cfg);
static DEVICE_ATTR(snr_wlimit_cfg, S_IWUSR | S_IRUSR,
sysfs_get_snr_wlimit_cfg, sysfs_set_snr_wlimit_cfg);
static struct attribute *nxp_sysfs_entries[] = {
&dev_attr_master_cfg.attr,
&dev_attr_power_cfg.attr,
&dev_attr_loopback_cfg.attr,
&dev_attr_cable_test.attr,
&dev_attr_test_mode.attr,
&dev_attr_led_cfg.attr,
&dev_attr_link_status.attr,
&dev_attr_wakeup_cfg.attr,
&dev_attr_snr_wlimit_cfg.attr,
NULL
};
static struct attribute_group nxp_attribute_group = {
.name = "configuration",
.attrs = nxp_sysfs_entries,
};
/* helper function, configures a register of phydev
*
* The function sets the bit of register reg_name,
* defined by bit_mask to 0 if (bit_value == 0), else to 1
* @return 0 if configuration completed, <0 if read/write
* error occurred
*/
static inline int phy_configure_bit(struct phy_device *phydev, int reg_name,
int bit_mask, int bit_value)
{
int reg_val, err;
if (verbosity > 2)
dev_alert(&phydev->mdio.dev, "%s bit on mask [%08x] of reg [%d] of phy %x\n", (bit_value?"enabling":"disabling"),
bit_mask, reg_name, phydev->mdio.addr);
reg_val = phy_read(phydev, reg_name);
if (reg_val < 0)
goto phy_read_error;
if (bit_value)
reg_val |= bit_mask;
else
reg_val &= ~bit_mask;
err = phy_write(phydev, reg_name, reg_val);
if (err < 0)
goto phy_write_error;
return 0;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: phy config failed\n");
return reg_val;
phy_write_error:
dev_err(&phydev->mdio.dev, "write error: phy config failed\n");
return err;
}
/* helper function, configures a register of phydev
*
* The function sets the bits of register reg_name,
* defined by bit_mask to bit_value
* @return 0 if configuration completed, <0 if read/write
* error occurred
*/
static inline int phy_configure_bits(struct phy_device *phydev, int reg_name,
int bit_mask, int bit_value)
{
int reg_val, err;
if (verbosity > 2)
dev_alert(&phydev->mdio.dev, "set mask [%08x] of reg [%d] of phy %x to value [%08x]\n",
bit_mask, reg_name, phydev->mdio.addr, bit_value);
reg_val = phy_read(phydev, reg_name);
if (reg_val < 0)
goto phy_read_error;
reg_val &= ~bit_mask;
reg_val |= bit_value;
err = phy_write(phydev, reg_name, reg_val);
if (err < 0)
goto phy_write_error;
return 0;
/* error handling */
phy_read_error:
dev_err(&phydev->mdio.dev, "read error: phy config failed\n");
return reg_val;
phy_write_error:
dev_err(&phydev->mdio.dev, "write error: phy config failed\n");
return err;
}
#ifdef NETDEV_NOTIFICATION_FIX
static struct class *bus_class_from_net_device(struct net_device *net_device,
const char *required_name)
{
struct class *bus_class;
if (!net_device ||
!net_device->phydev ||
!net_device->phydev->mdio.bus ||
!net_device->phydev->mdio.bus->dev.class ||
!net_device->phydev->mdio.bus->dev.class->name)
return NULL;
bus_class = net_device->phydev->mdio.bus->dev.class;
if (strcmp(bus_class->name, required_name) != 0)
return NULL;
return bus_class;
}
static int mdio_bus_name_matches(struct device *found_device,
const void *desired_name)
{
struct mii_bus *mdio_bus;
/* Since we know 'found_dev' belongs to a class with the name
'mdio_bus', we assume it is a member of a 'struct mii_bus',
and therefore it is safe to call container_of */
mdio_bus = container_of(found_device, struct mii_bus, dev);
/* Double check that this is indeed a 'struct mii_bus'. If it is,
it's state should be MDIO_REGISTERED at this point. If it is not, it is
either not a 'struct mii_bus', either it is in an undesired state. */
if (mdio_bus->state != MDIOBUS_REGISTERED)
return 0;
if (strcmp(mdio_bus->name, (char *)desired_name) == 0)
return 1;
return 0;
}
static struct mii_bus *find_mdio_bus_by_name(const char *name,
struct class *mdio_bus_class)
{
struct device *found_device;
found_device = class_find_device(mdio_bus_class,
NULL,
(void *)name,
mdio_bus_name_matches);
if (found_device)
return container_of(found_device, struct mii_bus, dev);
else
return NULL;
}
/* helper function, check if given phy id belongs to a nxp phy
*
* @return 0 if not an nxp phy, != 0 else
*/
static int is_nxp_phy(int phy_id)
{
return ((phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1100 ||
(phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1101 ||
(phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P0 ||
(phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102P1 ||
(phy_id & NXP_PHY_ID_MASK) == NXP_PHY_ID_TJA1102S);
}
/* traverse the phy_map of the given mdio_bus, and manipulate any phys found
* that are found according to the value of the event, ie.
* - start (resume) on NETDEV_UP
* - stop (suspend) on NETDEV_GOING_DOWN
*/
static void mdio_netdev_change_event(struct mii_bus *mdio_bus, int event)
{
/* normally on NETDEV_GOING_DOWN the kernel calls ndo_stop()
* of the eth controller, which stops and disconnects the one phy
* that is associated with the ethernet controller
* [see fec_enet_close() in fec_main.c l 2740].
* We need to do this manually for every NXP phy,
* however we do not (necessarily) have an attached_dev, so phy_detach,
* which is called by phy_disconnect(), would crash
*/
int phy_addr;
struct phy_device *phydev;
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
phydev = mdiobus_get_phy(mdio_bus, phy_addr);
if (!phydev)
continue;
if (!is_nxp_phy(phydev->phy_id) || !phydev->priv)
continue;
if (event == NETDEV_GOING_DOWN) {
/* stop polling,
* as mdio bus will become unavailable as soon as
* fec_runtime_suspend() (fec_main.c l4801) is called
*/
if (!no_poll)
stop_polling(phydev);
/* sets state to PHY_HALTED */
phy_stop(phydev);
} else if (event == NETDEV_UP) {
/* updates the phy state and resumes,
* if state previously was PHY_HALTED
*/
phy_start(phydev);
if (!no_poll)
start_polling(phydev);
}
}
}
/* callback, called whenever a netdev changes its state.
*
* Handles only NETDEV_GOING_DOWN and NETDEV_UP events of interface called
* MDIO_INTERFACE_NAME. Phys on the mdio bus "fec_enet_mii_bus"
* are stopped (suspended) and started (resumed) accordingly.
*
* @return NOTIFY_DONE
*/
static int netdev_state_change_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct mii_bus *mdio_bus;
struct class *bus_class;
struct net_device *net_device;
/* currently the eth0 interface controlls the mdio bus.
* However as CONFIG_FIXED_PHY is configured,
* eth0 is associated with "Fixed MDIO Bus", but the phydev
* is associated with "fec_enet_mii_bus". If eth0 goes down,
* only devices on "Fixed MDIO Bus" are notified (ie removed).
* We need to manually listen to eth0 events
* stops the phy and the polling
*/
if (event != NETDEV_GOING_DOWN && event != NETDEV_UP)
goto skip;
if (strcmp(dev->name, MDIO_INTERFACE_NAME) != 0)
goto skip;
net_device = first_net_device(&init_net);
do {
bus_class = bus_class_from_net_device(net_device, "mdio_bus");
if (!bus_class)
continue;
mdio_bus = find_mdio_bus_by_name(MII_BUS_NAME, bus_class);
if (!mdio_bus)
continue;
if (verbosity > 0)
pr_alert("NXP PHY: received event [%lx] for [%s]: Notifying phys on bus [%s]\n",
event, dev->name, mdio_bus->name);
mdio_netdev_change_event(mdio_bus, event);
} while ((net_device = next_net_device(net_device)));
skip:
return NOTIFY_DONE;
}
/* netdev notification infrastructure */
struct notifier_block netdev_notifier = {
.notifier_call = netdev_state_change_event
};
#endif
static struct phy_driver nxp_drivers[] = {
{
.phy_id = NXP_PHY_ID_TJA1100,
.name = "TJA1100",
.phy_id_mask = NXP_PHY_ID_MASK,
.features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_100BASET1_FULL),
.flags = 0,
.probe = &nxp_probe,
.remove = &nxp_remove,
.config_init = &nxp_config_init,
.config_aneg = &nxp_config_aneg,
.read_status = &genphy_read_status,
.resume = &nxp_resume,
.suspend = &nxp_suspend,
.config_intr = &nxp_config_intr,
.ack_interrupt = &nxp_ack_interrupt,
.did_interrupt = &nxp_did_interrupt,
}, {
.phy_id = NXP_PHY_ID_TJA1102P0,
.name = "TJA1102_p0",
.phy_id_mask = NXP_PHY_ID_MASK,
.features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_100BASET1_FULL),
.flags = 0,
.probe = &nxp_probe,
.remove = &nxp_remove,
.config_init = &nxp_config_init,
.config_aneg = &nxp_config_aneg,
.read_status = &genphy_read_status,
.resume = &nxp_resume,
.suspend = &nxp_suspend,
.config_intr = &nxp_config_intr,
.ack_interrupt = &nxp_ack_interrupt,
.did_interrupt = &nxp_did_interrupt,
}, {
.phy_id = NXP_PHY_ID_TJA1101,
.name = "TJA1101",
.phy_id_mask = NXP_PHY_ID_MASK,
.features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_100BASET1_FULL),
.flags = 0,
.probe = &nxp_probe,
.remove = &nxp_remove,
.config_init = &nxp_config_init,
.config_aneg = &nxp_config_aneg,
.read_status = &genphy_read_status,
.resume = &nxp_resume,
.suspend = &nxp_suspend,
.config_intr = &nxp_config_intr,
.ack_interrupt = &nxp_ack_interrupt,
.did_interrupt = &nxp_did_interrupt,
}, {
.phy_id = NXP_PHY_ID_TJA1102S,
.name = "TJA1102S",
.phy_id_mask = NXP_PHY_ID_MASK,
.features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_100BASET1_FULL),
.flags = 0,
.probe = &nxp_probe,
.remove = &nxp_remove,
.config_init = &nxp_config_init,
.config_aneg = &nxp_config_aneg,
.read_status = &genphy_read_status,
.resume = &nxp_resume,
.suspend = &nxp_suspend,
.config_intr = &nxp_config_intr,
.ack_interrupt = &nxp_ack_interrupt,
.did_interrupt = &nxp_did_interrupt,
#ifdef CONFIG_TJA1102_FIX
}, {
.phy_id = NXP_PHY_ID_TJA1102P1,
.name = "TJA1102_p1",
.phy_id_mask = NXP_PHY_ID_MASK,
.features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_100BASET1_FULL),
.flags = 0,
.probe = &nxp_probe,
.remove = &nxp_remove,
.config_init = &nxp_config_init,
.config_aneg = &nxp_config_aneg,
.read_status = &genphy_read_status,
.resume = &nxp_resume,
.suspend = &nxp_suspend,
.config_intr = &nxp_config_intr,
.ack_interrupt = &nxp_ack_interrupt,
.did_interrupt = &nxp_did_interrupt,
#endif
} };
/* module init function */
static int __init nxp_init(void)
{
int err;
pr_alert("NXP PHY: loading NXP PHY driver: [%s%s]\n",
(managed_mode ? "managed mode" : "autonomous mode"),
(no_poll ? ", polling disabled" : ""));
err = phy_drivers_register(nxp_drivers, ARRAY_SIZE(nxp_drivers), THIS_MODULE);
if (err)
goto drv_registration_error;
#ifdef NETDEV_NOTIFICATION_FIX
if (!no_poll) {
err = register_netdevice_notifier(&netdev_notifier);
if (err)
goto notification_registration_error;
}
#endif
return 0;
/* error handling */
drv_registration_error:
pr_err("NXP PHY: driver registration failed\n");
return err;
#ifdef NETDEV_NOTIFICATION_FIX
notification_registration_error:
pr_err("NXP PHY: could not register notification handler\n");
unregister_netdevice_notifier(&netdev_notifier);
return err;
#endif
}
module_init(nxp_init);
/* module exit function */
static void __exit nxp_exit(void)
{
pr_alert("NXP PHY: unloading NXP PHY driver\n");
#ifdef NETDEV_NOTIFICATION_FIX
if (!no_poll)
unregister_netdevice_notifier(&netdev_notifier);
#endif
phy_drivers_unregister(nxp_drivers, ARRAY_SIZE(nxp_drivers));
}
module_exit(nxp_exit);
/* use module device table for hotplugging support */
static struct mdio_device_id __maybe_unused nxp_tbl[] = {
{NXP_PHY_ID_TJA1100, NXP_PHY_ID_MASK},
{NXP_PHY_ID_TJA1102P0, NXP_PHY_ID_MASK},
{NXP_PHY_ID_TJA1102S, NXP_PHY_ID_MASK},
{}
};
MODULE_DEVICE_TABLE(mdio, nxp_tbl);
MODULE_DESCRIPTION("NXP PHY driver");
MODULE_AUTHOR("Marco Hartmann");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.3");