| /* |
| * Copyright 2017 NXP |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * CORTINA is a registered trademark of Cortina Systems, Inc. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/phy.h> |
| |
| #define PHY_ID_CS4340 0x13e51002 |
| |
| #define VILLA_GLOBAL_CHIP_ID_LSB 0x0 |
| #define VILLA_GLOBAL_CHIP_ID_MSB 0x1 |
| |
| #define VILLA_GLOBAL_GPIO_1_INTS 0x017 |
| |
| static int cortina_read_reg(struct phy_device *phydev, u16 regnum) |
| { |
| return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, |
| MII_ADDR_C45 | regnum); |
| } |
| |
| static int cortina_config_aneg(struct phy_device *phydev) |
| { |
| phydev->supported = SUPPORTED_10000baseT_Full; |
| phydev->advertising = SUPPORTED_10000baseT_Full; |
| |
| return 0; |
| } |
| |
| static int cortina_read_status(struct phy_device *phydev) |
| { |
| int gpio_int_status, ret = 0; |
| |
| gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS); |
| if (gpio_int_status < 0) { |
| ret = gpio_int_status; |
| goto err; |
| } |
| |
| if (gpio_int_status & 0x8) { |
| /* up when edc_convergedS set */ |
| phydev->speed = SPEED_10000; |
| phydev->duplex = DUPLEX_FULL; |
| phydev->link = 1; |
| } else { |
| phydev->link = 0; |
| } |
| |
| err: |
| return ret; |
| } |
| |
| static int cortina_soft_reset(struct phy_device *phydev) |
| { |
| return 0; |
| } |
| |
| static int cortina_probe(struct phy_device *phydev) |
| { |
| u32 phy_id = 0; |
| int id_lsb = 0, id_msb = 0; |
| |
| /* Read device id from phy registers. */ |
| id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB); |
| if (id_lsb < 0) |
| return -ENXIO; |
| |
| phy_id = id_lsb << 16; |
| |
| id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB); |
| if (id_msb < 0) |
| return -ENXIO; |
| |
| phy_id |= id_msb; |
| |
| /* Make sure the device tree binding matched the driver with the |
| * right device. |
| */ |
| if (phy_id != phydev->drv->phy_id) { |
| phydev_err(phydev, "Error matching phy with %s driver\n", |
| phydev->drv->name); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static struct phy_driver cortina_driver[] = { |
| { |
| .phy_id = PHY_ID_CS4340, |
| .phy_id_mask = 0xffffffff, |
| .name = "Cortina CS4340", |
| .config_aneg = cortina_config_aneg, |
| .read_status = cortina_read_status, |
| .soft_reset = cortina_soft_reset, |
| .probe = cortina_probe, |
| }, |
| }; |
| |
| module_phy_driver(cortina_driver); |
| |
| static struct mdio_device_id __maybe_unused cortina_tbl[] = { |
| { PHY_ID_CS4340, 0xffffffff}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, cortina_tbl); |