|  | /* audit.c -- Auditing support | 
|  | * Gateway between the kernel (e.g., selinux) and the user-space audit daemon. | 
|  | * System-call specific features have moved to auditsc.c | 
|  | * | 
|  | * Copyright 2003-2007 Red Hat Inc., Durham, North Carolina. | 
|  | * All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | * | 
|  | * Written by Rickard E. (Rik) Faith <faith@redhat.com> | 
|  | * | 
|  | * Goals: 1) Integrate fully with Security Modules. | 
|  | *	  2) Minimal run-time overhead: | 
|  | *	     a) Minimal when syscall auditing is disabled (audit_enable=0). | 
|  | *	     b) Small when syscall auditing is enabled and no audit record | 
|  | *		is generated (defer as much work as possible to record | 
|  | *		generation time): | 
|  | *		i) context is allocated, | 
|  | *		ii) names from getname are stored without a copy, and | 
|  | *		iii) inode information stored from path_lookup. | 
|  | *	  3) Ability to disable syscall auditing at boot time (audit=0). | 
|  | *	  4) Usable by other parts of the kernel (if audit_log* is called, | 
|  | *	     then a syscall record will be generated automatically for the | 
|  | *	     current syscall). | 
|  | *	  5) Netlink interface to user-space. | 
|  | *	  6) Support low-overhead kernel-based filtering to minimize the | 
|  | *	     information that must be passed to user-space. | 
|  | * | 
|  | * Example user-space utilities: http://people.redhat.com/sgrubb/audit/ | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <asm/types.h> | 
|  | #include <linux/atomic.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/syscalls.h> | 
|  |  | 
|  | #include <linux/audit.h> | 
|  |  | 
|  | #include <net/sock.h> | 
|  | #include <net/netlink.h> | 
|  | #include <linux/skbuff.h> | 
|  | #ifdef CONFIG_SECURITY | 
|  | #include <linux/security.h> | 
|  | #endif | 
|  | #include <linux/freezer.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/pid_namespace.h> | 
|  | #include <net/netns/generic.h> | 
|  |  | 
|  | #include "audit.h" | 
|  |  | 
|  | /* No auditing will take place until audit_initialized == AUDIT_INITIALIZED. | 
|  | * (Initialization happens after skb_init is called.) */ | 
|  | #define AUDIT_DISABLED		-1 | 
|  | #define AUDIT_UNINITIALIZED	0 | 
|  | #define AUDIT_INITIALIZED	1 | 
|  | static int	audit_initialized; | 
|  |  | 
|  | #define AUDIT_OFF	0 | 
|  | #define AUDIT_ON	1 | 
|  | #define AUDIT_LOCKED	2 | 
|  | u32		audit_enabled; | 
|  | u32		audit_ever_enabled; | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(audit_enabled); | 
|  |  | 
|  | /* Default state when kernel boots without any parameters. */ | 
|  | static u32	audit_default; | 
|  |  | 
|  | /* If auditing cannot proceed, audit_failure selects what happens. */ | 
|  | static u32	audit_failure = AUDIT_FAIL_PRINTK; | 
|  |  | 
|  | /* | 
|  | * If audit records are to be written to the netlink socket, audit_pid | 
|  | * contains the pid of the auditd process and audit_nlk_portid contains | 
|  | * the portid to use to send netlink messages to that process. | 
|  | */ | 
|  | int		audit_pid; | 
|  | static __u32	audit_nlk_portid; | 
|  |  | 
|  | /* If audit_rate_limit is non-zero, limit the rate of sending audit records | 
|  | * to that number per second.  This prevents DoS attacks, but results in | 
|  | * audit records being dropped. */ | 
|  | static u32	audit_rate_limit; | 
|  |  | 
|  | /* Number of outstanding audit_buffers allowed. | 
|  | * When set to zero, this means unlimited. */ | 
|  | static u32	audit_backlog_limit = 64; | 
|  | #define AUDIT_BACKLOG_WAIT_TIME (60 * HZ) | 
|  | static u32	audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME; | 
|  | static u32	audit_backlog_wait_overflow = 0; | 
|  |  | 
|  | /* The identity of the user shutting down the audit system. */ | 
|  | kuid_t		audit_sig_uid = INVALID_UID; | 
|  | pid_t		audit_sig_pid = -1; | 
|  | u32		audit_sig_sid = 0; | 
|  |  | 
|  | /* Records can be lost in several ways: | 
|  | 0) [suppressed in audit_alloc] | 
|  | 1) out of memory in audit_log_start [kmalloc of struct audit_buffer] | 
|  | 2) out of memory in audit_log_move [alloc_skb] | 
|  | 3) suppressed due to audit_rate_limit | 
|  | 4) suppressed due to audit_backlog_limit | 
|  | */ | 
|  | static atomic_t    audit_lost = ATOMIC_INIT(0); | 
|  |  | 
|  | /* The netlink socket. */ | 
|  | static struct sock *audit_sock; | 
|  | int audit_net_id; | 
|  |  | 
|  | /* Hash for inode-based rules */ | 
|  | struct list_head audit_inode_hash[AUDIT_INODE_BUCKETS]; | 
|  |  | 
|  | /* The audit_freelist is a list of pre-allocated audit buffers (if more | 
|  | * than AUDIT_MAXFREE are in use, the audit buffer is freed instead of | 
|  | * being placed on the freelist). */ | 
|  | static DEFINE_SPINLOCK(audit_freelist_lock); | 
|  | static int	   audit_freelist_count; | 
|  | static LIST_HEAD(audit_freelist); | 
|  |  | 
|  | static struct sk_buff_head audit_skb_queue; | 
|  | /* queue of skbs to send to auditd when/if it comes back */ | 
|  | static struct sk_buff_head audit_skb_hold_queue; | 
|  | static struct task_struct *kauditd_task; | 
|  | static DECLARE_WAIT_QUEUE_HEAD(kauditd_wait); | 
|  | static DECLARE_WAIT_QUEUE_HEAD(audit_backlog_wait); | 
|  |  | 
|  | static struct audit_features af = {.vers = AUDIT_FEATURE_VERSION, | 
|  | .mask = -1, | 
|  | .features = 0, | 
|  | .lock = 0,}; | 
|  |  | 
|  | static char *audit_feature_names[2] = { | 
|  | "only_unset_loginuid", | 
|  | "loginuid_immutable", | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* Serialize requests from userspace. */ | 
|  | DEFINE_MUTEX(audit_cmd_mutex); | 
|  |  | 
|  | /* AUDIT_BUFSIZ is the size of the temporary buffer used for formatting | 
|  | * audit records.  Since printk uses a 1024 byte buffer, this buffer | 
|  | * should be at least that large. */ | 
|  | #define AUDIT_BUFSIZ 1024 | 
|  |  | 
|  | /* AUDIT_MAXFREE is the number of empty audit_buffers we keep on the | 
|  | * audit_freelist.  Doing so eliminates many kmalloc/kfree calls. */ | 
|  | #define AUDIT_MAXFREE  (2*NR_CPUS) | 
|  |  | 
|  | /* The audit_buffer is used when formatting an audit record.  The caller | 
|  | * locks briefly to get the record off the freelist or to allocate the | 
|  | * buffer, and locks briefly to send the buffer to the netlink layer or | 
|  | * to place it on a transmit queue.  Multiple audit_buffers can be in | 
|  | * use simultaneously. */ | 
|  | struct audit_buffer { | 
|  | struct list_head     list; | 
|  | struct sk_buff       *skb;	/* formatted skb ready to send */ | 
|  | struct audit_context *ctx;	/* NULL or associated context */ | 
|  | gfp_t		     gfp_mask; | 
|  | }; | 
|  |  | 
|  | struct audit_reply { | 
|  | __u32 portid; | 
|  | struct net *net; | 
|  | struct sk_buff *skb; | 
|  | }; | 
|  |  | 
|  | static void audit_set_portid(struct audit_buffer *ab, __u32 portid) | 
|  | { | 
|  | if (ab) { | 
|  | struct nlmsghdr *nlh = nlmsg_hdr(ab->skb); | 
|  | nlh->nlmsg_pid = portid; | 
|  | } | 
|  | } | 
|  |  | 
|  | void audit_panic(const char *message) | 
|  | { | 
|  | switch (audit_failure) { | 
|  | case AUDIT_FAIL_SILENT: | 
|  | break; | 
|  | case AUDIT_FAIL_PRINTK: | 
|  | if (printk_ratelimit()) | 
|  | pr_err("%s\n", message); | 
|  | break; | 
|  | case AUDIT_FAIL_PANIC: | 
|  | /* test audit_pid since printk is always losey, why bother? */ | 
|  | if (audit_pid) | 
|  | panic("audit: %s\n", message); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int audit_rate_check(void) | 
|  | { | 
|  | static unsigned long	last_check = 0; | 
|  | static int		messages   = 0; | 
|  | static DEFINE_SPINLOCK(lock); | 
|  | unsigned long		flags; | 
|  | unsigned long		now; | 
|  | unsigned long		elapsed; | 
|  | int			retval	   = 0; | 
|  |  | 
|  | if (!audit_rate_limit) return 1; | 
|  |  | 
|  | spin_lock_irqsave(&lock, flags); | 
|  | if (++messages < audit_rate_limit) { | 
|  | retval = 1; | 
|  | } else { | 
|  | now     = jiffies; | 
|  | elapsed = now - last_check; | 
|  | if (elapsed > HZ) { | 
|  | last_check = now; | 
|  | messages   = 0; | 
|  | retval     = 1; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&lock, flags); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_lost - conditionally log lost audit message event | 
|  | * @message: the message stating reason for lost audit message | 
|  | * | 
|  | * Emit at least 1 message per second, even if audit_rate_check is | 
|  | * throttling. | 
|  | * Always increment the lost messages counter. | 
|  | */ | 
|  | void audit_log_lost(const char *message) | 
|  | { | 
|  | static unsigned long	last_msg = 0; | 
|  | static DEFINE_SPINLOCK(lock); | 
|  | unsigned long		flags; | 
|  | unsigned long		now; | 
|  | int			print; | 
|  |  | 
|  | atomic_inc(&audit_lost); | 
|  |  | 
|  | print = (audit_failure == AUDIT_FAIL_PANIC || !audit_rate_limit); | 
|  |  | 
|  | if (!print) { | 
|  | spin_lock_irqsave(&lock, flags); | 
|  | now = jiffies; | 
|  | if (now - last_msg > HZ) { | 
|  | print = 1; | 
|  | last_msg = now; | 
|  | } | 
|  | spin_unlock_irqrestore(&lock, flags); | 
|  | } | 
|  |  | 
|  | if (print) { | 
|  | if (printk_ratelimit()) | 
|  | pr_warn("audit_lost=%u audit_rate_limit=%u audit_backlog_limit=%u\n", | 
|  | atomic_read(&audit_lost), | 
|  | audit_rate_limit, | 
|  | audit_backlog_limit); | 
|  | audit_panic(message); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int audit_log_config_change(char *function_name, u32 new, u32 old, | 
|  | int allow_changes) | 
|  | { | 
|  | struct audit_buffer *ab; | 
|  | int rc = 0; | 
|  |  | 
|  | ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); | 
|  | if (unlikely(!ab)) | 
|  | return rc; | 
|  | audit_log_format(ab, "%s=%u old=%u", function_name, new, old); | 
|  | audit_log_session_info(ab); | 
|  | rc = audit_log_task_context(ab); | 
|  | if (rc) | 
|  | allow_changes = 0; /* Something weird, deny request */ | 
|  | audit_log_format(ab, " res=%d", allow_changes); | 
|  | audit_log_end(ab); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int audit_do_config_change(char *function_name, u32 *to_change, u32 new) | 
|  | { | 
|  | int allow_changes, rc = 0; | 
|  | u32 old = *to_change; | 
|  |  | 
|  | /* check if we are locked */ | 
|  | if (audit_enabled == AUDIT_LOCKED) | 
|  | allow_changes = 0; | 
|  | else | 
|  | allow_changes = 1; | 
|  |  | 
|  | if (audit_enabled != AUDIT_OFF) { | 
|  | rc = audit_log_config_change(function_name, new, old, allow_changes); | 
|  | if (rc) | 
|  | allow_changes = 0; | 
|  | } | 
|  |  | 
|  | /* If we are allowed, make the change */ | 
|  | if (allow_changes == 1) | 
|  | *to_change = new; | 
|  | /* Not allowed, update reason */ | 
|  | else if (rc == 0) | 
|  | rc = -EPERM; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int audit_set_rate_limit(u32 limit) | 
|  | { | 
|  | return audit_do_config_change("audit_rate_limit", &audit_rate_limit, limit); | 
|  | } | 
|  |  | 
|  | static int audit_set_backlog_limit(u32 limit) | 
|  | { | 
|  | return audit_do_config_change("audit_backlog_limit", &audit_backlog_limit, limit); | 
|  | } | 
|  |  | 
|  | static int audit_set_backlog_wait_time(u32 timeout) | 
|  | { | 
|  | return audit_do_config_change("audit_backlog_wait_time", | 
|  | &audit_backlog_wait_time, timeout); | 
|  | } | 
|  |  | 
|  | static int audit_set_enabled(u32 state) | 
|  | { | 
|  | int rc; | 
|  | if (state < AUDIT_OFF || state > AUDIT_LOCKED) | 
|  | return -EINVAL; | 
|  |  | 
|  | rc =  audit_do_config_change("audit_enabled", &audit_enabled, state); | 
|  | if (!rc) | 
|  | audit_ever_enabled |= !!state; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int audit_set_failure(u32 state) | 
|  | { | 
|  | if (state != AUDIT_FAIL_SILENT | 
|  | && state != AUDIT_FAIL_PRINTK | 
|  | && state != AUDIT_FAIL_PANIC) | 
|  | return -EINVAL; | 
|  |  | 
|  | return audit_do_config_change("audit_failure", &audit_failure, state); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Queue skbs to be sent to auditd when/if it comes back.  These skbs should | 
|  | * already have been sent via prink/syslog and so if these messages are dropped | 
|  | * it is not a huge concern since we already passed the audit_log_lost() | 
|  | * notification and stuff.  This is just nice to get audit messages during | 
|  | * boot before auditd is running or messages generated while auditd is stopped. | 
|  | * This only holds messages is audit_default is set, aka booting with audit=1 | 
|  | * or building your kernel that way. | 
|  | */ | 
|  | static void audit_hold_skb(struct sk_buff *skb) | 
|  | { | 
|  | if (audit_default && | 
|  | (!audit_backlog_limit || | 
|  | skb_queue_len(&audit_skb_hold_queue) < audit_backlog_limit)) | 
|  | skb_queue_tail(&audit_skb_hold_queue, skb); | 
|  | else | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For one reason or another this nlh isn't getting delivered to the userspace | 
|  | * audit daemon, just send it to printk. | 
|  | */ | 
|  | static void audit_printk_skb(struct sk_buff *skb) | 
|  | { | 
|  | struct nlmsghdr *nlh = nlmsg_hdr(skb); | 
|  | char *data = nlmsg_data(nlh); | 
|  |  | 
|  | if (nlh->nlmsg_type != AUDIT_EOE) { | 
|  | if (printk_ratelimit()) | 
|  | pr_notice("type=%d %s\n", nlh->nlmsg_type, data); | 
|  | else | 
|  | audit_log_lost("printk limit exceeded"); | 
|  | } | 
|  |  | 
|  | audit_hold_skb(skb); | 
|  | } | 
|  |  | 
|  | static void kauditd_send_skb(struct sk_buff *skb) | 
|  | { | 
|  | int err; | 
|  | /* take a reference in case we can't send it and we want to hold it */ | 
|  | skb_get(skb); | 
|  | err = netlink_unicast(audit_sock, skb, audit_nlk_portid, 0); | 
|  | if (err < 0) { | 
|  | BUG_ON(err != -ECONNREFUSED); /* Shouldn't happen */ | 
|  | if (audit_pid) { | 
|  | pr_err("*NO* daemon at audit_pid=%d\n", audit_pid); | 
|  | audit_log_lost("auditd disappeared"); | 
|  | audit_pid = 0; | 
|  | audit_sock = NULL; | 
|  | } | 
|  | /* we might get lucky and get this in the next auditd */ | 
|  | audit_hold_skb(skb); | 
|  | } else | 
|  | /* drop the extra reference if sent ok */ | 
|  | consume_skb(skb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * flush_hold_queue - empty the hold queue if auditd appears | 
|  | * | 
|  | * If auditd just started, drain the queue of messages already | 
|  | * sent to syslog/printk.  Remember loss here is ok.  We already | 
|  | * called audit_log_lost() if it didn't go out normally.  so the | 
|  | * race between the skb_dequeue and the next check for audit_pid | 
|  | * doesn't matter. | 
|  | * | 
|  | * If you ever find kauditd to be too slow we can get a perf win | 
|  | * by doing our own locking and keeping better track if there | 
|  | * are messages in this queue.  I don't see the need now, but | 
|  | * in 5 years when I want to play with this again I'll see this | 
|  | * note and still have no friggin idea what i'm thinking today. | 
|  | */ | 
|  | static void flush_hold_queue(void) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!audit_default || !audit_pid) | 
|  | return; | 
|  |  | 
|  | skb = skb_dequeue(&audit_skb_hold_queue); | 
|  | if (likely(!skb)) | 
|  | return; | 
|  |  | 
|  | while (skb && audit_pid) { | 
|  | kauditd_send_skb(skb); | 
|  | skb = skb_dequeue(&audit_skb_hold_queue); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if auditd just disappeared but we | 
|  | * dequeued an skb we need to drop ref | 
|  | */ | 
|  | if (skb) | 
|  | consume_skb(skb); | 
|  | } | 
|  |  | 
|  | static int kauditd_thread(void *dummy) | 
|  | { | 
|  | set_freezable(); | 
|  | while (!kthread_should_stop()) { | 
|  | struct sk_buff *skb; | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  |  | 
|  | flush_hold_queue(); | 
|  |  | 
|  | skb = skb_dequeue(&audit_skb_queue); | 
|  |  | 
|  | if (skb) { | 
|  | if (skb_queue_len(&audit_skb_queue) <= audit_backlog_limit) | 
|  | wake_up(&audit_backlog_wait); | 
|  | if (audit_pid) | 
|  | kauditd_send_skb(skb); | 
|  | else | 
|  | audit_printk_skb(skb); | 
|  | continue; | 
|  | } | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | add_wait_queue(&kauditd_wait, &wait); | 
|  |  | 
|  | if (!skb_queue_len(&audit_skb_queue)) { | 
|  | try_to_freeze(); | 
|  | schedule(); | 
|  | } | 
|  |  | 
|  | __set_current_state(TASK_RUNNING); | 
|  | remove_wait_queue(&kauditd_wait, &wait); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int audit_send_list(void *_dest) | 
|  | { | 
|  | struct audit_netlink_list *dest = _dest; | 
|  | struct sk_buff *skb; | 
|  | struct net *net = dest->net; | 
|  | struct audit_net *aunet = net_generic(net, audit_net_id); | 
|  |  | 
|  | /* wait for parent to finish and send an ACK */ | 
|  | mutex_lock(&audit_cmd_mutex); | 
|  | mutex_unlock(&audit_cmd_mutex); | 
|  |  | 
|  | while ((skb = __skb_dequeue(&dest->q)) != NULL) | 
|  | netlink_unicast(aunet->nlsk, skb, dest->portid, 0); | 
|  |  | 
|  | put_net(net); | 
|  | kfree(dest); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct sk_buff *audit_make_reply(__u32 portid, int seq, int type, int done, | 
|  | int multi, const void *payload, int size) | 
|  | { | 
|  | struct sk_buff	*skb; | 
|  | struct nlmsghdr	*nlh; | 
|  | void		*data; | 
|  | int		flags = multi ? NLM_F_MULTI : 0; | 
|  | int		t     = done  ? NLMSG_DONE  : type; | 
|  |  | 
|  | skb = nlmsg_new(size, GFP_KERNEL); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | nlh	= nlmsg_put(skb, portid, seq, t, size, flags); | 
|  | if (!nlh) | 
|  | goto out_kfree_skb; | 
|  | data = nlmsg_data(nlh); | 
|  | memcpy(data, payload, size); | 
|  | return skb; | 
|  |  | 
|  | out_kfree_skb: | 
|  | kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int audit_send_reply_thread(void *arg) | 
|  | { | 
|  | struct audit_reply *reply = (struct audit_reply *)arg; | 
|  | struct net *net = reply->net; | 
|  | struct audit_net *aunet = net_generic(net, audit_net_id); | 
|  |  | 
|  | mutex_lock(&audit_cmd_mutex); | 
|  | mutex_unlock(&audit_cmd_mutex); | 
|  |  | 
|  | /* Ignore failure. It'll only happen if the sender goes away, | 
|  | because our timeout is set to infinite. */ | 
|  | netlink_unicast(aunet->nlsk , reply->skb, reply->portid, 0); | 
|  | put_net(net); | 
|  | kfree(reply); | 
|  | return 0; | 
|  | } | 
|  | /** | 
|  | * audit_send_reply - send an audit reply message via netlink | 
|  | * @request_skb: skb of request we are replying to (used to target the reply) | 
|  | * @seq: sequence number | 
|  | * @type: audit message type | 
|  | * @done: done (last) flag | 
|  | * @multi: multi-part message flag | 
|  | * @payload: payload data | 
|  | * @size: payload size | 
|  | * | 
|  | * Allocates an skb, builds the netlink message, and sends it to the port id. | 
|  | * No failure notifications. | 
|  | */ | 
|  | static void audit_send_reply(struct sk_buff *request_skb, int seq, int type, int done, | 
|  | int multi, const void *payload, int size) | 
|  | { | 
|  | u32 portid = NETLINK_CB(request_skb).portid; | 
|  | struct net *net = sock_net(NETLINK_CB(request_skb).sk); | 
|  | struct sk_buff *skb; | 
|  | struct task_struct *tsk; | 
|  | struct audit_reply *reply = kmalloc(sizeof(struct audit_reply), | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (!reply) | 
|  | return; | 
|  |  | 
|  | skb = audit_make_reply(portid, seq, type, done, multi, payload, size); | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | reply->net = get_net(net); | 
|  | reply->portid = portid; | 
|  | reply->skb = skb; | 
|  |  | 
|  | tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply"); | 
|  | if (!IS_ERR(tsk)) | 
|  | return; | 
|  | kfree_skb(skb); | 
|  | out: | 
|  | kfree(reply); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for appropriate CAP_AUDIT_ capabilities on incoming audit | 
|  | * control messages. | 
|  | */ | 
|  | static int audit_netlink_ok(struct sk_buff *skb, u16 msg_type) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | /* Only support initial user namespace for now. */ | 
|  | /* | 
|  | * We return ECONNREFUSED because it tricks userspace into thinking | 
|  | * that audit was not configured into the kernel.  Lots of users | 
|  | * configure their PAM stack (because that's what the distro does) | 
|  | * to reject login if unable to send messages to audit.  If we return | 
|  | * ECONNREFUSED the PAM stack thinks the kernel does not have audit | 
|  | * configured in and will let login proceed.  If we return EPERM | 
|  | * userspace will reject all logins.  This should be removed when we | 
|  | * support non init namespaces!! | 
|  | */ | 
|  | if (current_user_ns() != &init_user_ns) | 
|  | return -ECONNREFUSED; | 
|  |  | 
|  | switch (msg_type) { | 
|  | case AUDIT_LIST: | 
|  | case AUDIT_ADD: | 
|  | case AUDIT_DEL: | 
|  | return -EOPNOTSUPP; | 
|  | case AUDIT_GET: | 
|  | case AUDIT_SET: | 
|  | case AUDIT_GET_FEATURE: | 
|  | case AUDIT_SET_FEATURE: | 
|  | case AUDIT_LIST_RULES: | 
|  | case AUDIT_ADD_RULE: | 
|  | case AUDIT_DEL_RULE: | 
|  | case AUDIT_SIGNAL_INFO: | 
|  | case AUDIT_TTY_GET: | 
|  | case AUDIT_TTY_SET: | 
|  | case AUDIT_TRIM: | 
|  | case AUDIT_MAKE_EQUIV: | 
|  | /* Only support auditd and auditctl in initial pid namespace | 
|  | * for now. */ | 
|  | if ((task_active_pid_ns(current) != &init_pid_ns)) | 
|  | return -EPERM; | 
|  |  | 
|  | if (!capable(CAP_AUDIT_CONTROL)) | 
|  | err = -EPERM; | 
|  | break; | 
|  | case AUDIT_USER: | 
|  | case AUDIT_FIRST_USER_MSG ... AUDIT_LAST_USER_MSG: | 
|  | case AUDIT_FIRST_USER_MSG2 ... AUDIT_LAST_USER_MSG2: | 
|  | if (!capable(CAP_AUDIT_WRITE)) | 
|  | err = -EPERM; | 
|  | break; | 
|  | default:  /* bad msg */ | 
|  | err = -EINVAL; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int audit_log_common_recv_msg(struct audit_buffer **ab, u16 msg_type) | 
|  | { | 
|  | int rc = 0; | 
|  | uid_t uid = from_kuid(&init_user_ns, current_uid()); | 
|  | pid_t pid = task_tgid_nr(current); | 
|  |  | 
|  | if (!audit_enabled && msg_type != AUDIT_USER_AVC) { | 
|  | *ab = NULL; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | *ab = audit_log_start(NULL, GFP_KERNEL, msg_type); | 
|  | if (unlikely(!*ab)) | 
|  | return rc; | 
|  | audit_log_format(*ab, "pid=%d uid=%u", pid, uid); | 
|  | audit_log_session_info(*ab); | 
|  | audit_log_task_context(*ab); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int is_audit_feature_set(int i) | 
|  | { | 
|  | return af.features & AUDIT_FEATURE_TO_MASK(i); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int audit_get_feature(struct sk_buff *skb) | 
|  | { | 
|  | u32 seq; | 
|  |  | 
|  | seq = nlmsg_hdr(skb)->nlmsg_seq; | 
|  |  | 
|  | audit_send_reply(skb, seq, AUDIT_GET, 0, 0, &af, sizeof(af)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void audit_log_feature_change(int which, u32 old_feature, u32 new_feature, | 
|  | u32 old_lock, u32 new_lock, int res) | 
|  | { | 
|  | struct audit_buffer *ab; | 
|  |  | 
|  | if (audit_enabled == AUDIT_OFF) | 
|  | return; | 
|  |  | 
|  | ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_FEATURE_CHANGE); | 
|  | audit_log_task_info(ab, current); | 
|  | audit_log_format(ab, "feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d", | 
|  | audit_feature_names[which], !!old_feature, !!new_feature, | 
|  | !!old_lock, !!new_lock, res); | 
|  | audit_log_end(ab); | 
|  | } | 
|  |  | 
|  | static int audit_set_feature(struct sk_buff *skb) | 
|  | { | 
|  | struct audit_features *uaf; | 
|  | int i; | 
|  |  | 
|  | BUILD_BUG_ON(AUDIT_LAST_FEATURE + 1 > sizeof(audit_feature_names)/sizeof(audit_feature_names[0])); | 
|  | uaf = nlmsg_data(nlmsg_hdr(skb)); | 
|  |  | 
|  | /* if there is ever a version 2 we should handle that here */ | 
|  |  | 
|  | for (i = 0; i <= AUDIT_LAST_FEATURE; i++) { | 
|  | u32 feature = AUDIT_FEATURE_TO_MASK(i); | 
|  | u32 old_feature, new_feature, old_lock, new_lock; | 
|  |  | 
|  | /* if we are not changing this feature, move along */ | 
|  | if (!(feature & uaf->mask)) | 
|  | continue; | 
|  |  | 
|  | old_feature = af.features & feature; | 
|  | new_feature = uaf->features & feature; | 
|  | new_lock = (uaf->lock | af.lock) & feature; | 
|  | old_lock = af.lock & feature; | 
|  |  | 
|  | /* are we changing a locked feature? */ | 
|  | if (old_lock && (new_feature != old_feature)) { | 
|  | audit_log_feature_change(i, old_feature, new_feature, | 
|  | old_lock, new_lock, 0); | 
|  | return -EPERM; | 
|  | } | 
|  | } | 
|  | /* nothing invalid, do the changes */ | 
|  | for (i = 0; i <= AUDIT_LAST_FEATURE; i++) { | 
|  | u32 feature = AUDIT_FEATURE_TO_MASK(i); | 
|  | u32 old_feature, new_feature, old_lock, new_lock; | 
|  |  | 
|  | /* if we are not changing this feature, move along */ | 
|  | if (!(feature & uaf->mask)) | 
|  | continue; | 
|  |  | 
|  | old_feature = af.features & feature; | 
|  | new_feature = uaf->features & feature; | 
|  | old_lock = af.lock & feature; | 
|  | new_lock = (uaf->lock | af.lock) & feature; | 
|  |  | 
|  | if (new_feature != old_feature) | 
|  | audit_log_feature_change(i, old_feature, new_feature, | 
|  | old_lock, new_lock, 1); | 
|  |  | 
|  | if (new_feature) | 
|  | af.features |= feature; | 
|  | else | 
|  | af.features &= ~feature; | 
|  | af.lock |= new_lock; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) | 
|  | { | 
|  | u32			seq; | 
|  | void			*data; | 
|  | int			err; | 
|  | struct audit_buffer	*ab; | 
|  | u16			msg_type = nlh->nlmsg_type; | 
|  | struct audit_sig_info   *sig_data; | 
|  | char			*ctx = NULL; | 
|  | u32			len; | 
|  |  | 
|  | err = audit_netlink_ok(skb, msg_type); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* As soon as there's any sign of userspace auditd, | 
|  | * start kauditd to talk to it */ | 
|  | if (!kauditd_task) { | 
|  | kauditd_task = kthread_run(kauditd_thread, NULL, "kauditd"); | 
|  | if (IS_ERR(kauditd_task)) { | 
|  | err = PTR_ERR(kauditd_task); | 
|  | kauditd_task = NULL; | 
|  | return err; | 
|  | } | 
|  | } | 
|  | seq  = nlh->nlmsg_seq; | 
|  | data = nlmsg_data(nlh); | 
|  |  | 
|  | switch (msg_type) { | 
|  | case AUDIT_GET: { | 
|  | struct audit_status	s; | 
|  | memset(&s, 0, sizeof(s)); | 
|  | s.enabled		= audit_enabled; | 
|  | s.failure		= audit_failure; | 
|  | s.pid			= audit_pid; | 
|  | s.rate_limit		= audit_rate_limit; | 
|  | s.backlog_limit		= audit_backlog_limit; | 
|  | s.lost			= atomic_read(&audit_lost); | 
|  | s.backlog		= skb_queue_len(&audit_skb_queue); | 
|  | s.version		= AUDIT_VERSION_LATEST; | 
|  | s.backlog_wait_time	= audit_backlog_wait_time; | 
|  | audit_send_reply(skb, seq, AUDIT_GET, 0, 0, &s, sizeof(s)); | 
|  | break; | 
|  | } | 
|  | case AUDIT_SET: { | 
|  | struct audit_status	s; | 
|  | memset(&s, 0, sizeof(s)); | 
|  | /* guard against past and future API changes */ | 
|  | memcpy(&s, data, min_t(size_t, sizeof(s), nlmsg_len(nlh))); | 
|  | if (s.mask & AUDIT_STATUS_ENABLED) { | 
|  | err = audit_set_enabled(s.enabled); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | if (s.mask & AUDIT_STATUS_FAILURE) { | 
|  | err = audit_set_failure(s.failure); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | if (s.mask & AUDIT_STATUS_PID) { | 
|  | int new_pid = s.pid; | 
|  |  | 
|  | if ((!new_pid) && (task_tgid_vnr(current) != audit_pid)) | 
|  | return -EACCES; | 
|  | if (audit_enabled != AUDIT_OFF) | 
|  | audit_log_config_change("audit_pid", new_pid, audit_pid, 1); | 
|  | audit_pid = new_pid; | 
|  | audit_nlk_portid = NETLINK_CB(skb).portid; | 
|  | audit_sock = skb->sk; | 
|  | } | 
|  | if (s.mask & AUDIT_STATUS_RATE_LIMIT) { | 
|  | err = audit_set_rate_limit(s.rate_limit); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | if (s.mask & AUDIT_STATUS_BACKLOG_LIMIT) { | 
|  | err = audit_set_backlog_limit(s.backlog_limit); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | if (s.mask & AUDIT_STATUS_BACKLOG_WAIT_TIME) { | 
|  | if (sizeof(s) > (size_t)nlh->nlmsg_len) | 
|  | return -EINVAL; | 
|  | if (s.backlog_wait_time < 0 || | 
|  | s.backlog_wait_time > 10*AUDIT_BACKLOG_WAIT_TIME) | 
|  | return -EINVAL; | 
|  | err = audit_set_backlog_wait_time(s.backlog_wait_time); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | break; | 
|  | } | 
|  | case AUDIT_GET_FEATURE: | 
|  | err = audit_get_feature(skb); | 
|  | if (err) | 
|  | return err; | 
|  | break; | 
|  | case AUDIT_SET_FEATURE: | 
|  | err = audit_set_feature(skb); | 
|  | if (err) | 
|  | return err; | 
|  | break; | 
|  | case AUDIT_USER: | 
|  | case AUDIT_FIRST_USER_MSG ... AUDIT_LAST_USER_MSG: | 
|  | case AUDIT_FIRST_USER_MSG2 ... AUDIT_LAST_USER_MSG2: | 
|  | if (!audit_enabled && msg_type != AUDIT_USER_AVC) | 
|  | return 0; | 
|  |  | 
|  | err = audit_filter_user(msg_type); | 
|  | if (err == 1) { /* match or error */ | 
|  | err = 0; | 
|  | if (msg_type == AUDIT_USER_TTY) { | 
|  | err = tty_audit_push_current(); | 
|  | if (err) | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&audit_cmd_mutex); | 
|  | audit_log_common_recv_msg(&ab, msg_type); | 
|  | if (msg_type != AUDIT_USER_TTY) | 
|  | audit_log_format(ab, " msg='%.*s'", | 
|  | AUDIT_MESSAGE_TEXT_MAX, | 
|  | (char *)data); | 
|  | else { | 
|  | int size; | 
|  |  | 
|  | audit_log_format(ab, " data="); | 
|  | size = nlmsg_len(nlh); | 
|  | if (size > 0 && | 
|  | ((unsigned char *)data)[size - 1] == '\0') | 
|  | size--; | 
|  | audit_log_n_untrustedstring(ab, data, size); | 
|  | } | 
|  | audit_set_portid(ab, NETLINK_CB(skb).portid); | 
|  | audit_log_end(ab); | 
|  | mutex_lock(&audit_cmd_mutex); | 
|  | } | 
|  | break; | 
|  | case AUDIT_ADD_RULE: | 
|  | case AUDIT_DEL_RULE: | 
|  | if (nlmsg_len(nlh) < sizeof(struct audit_rule_data)) | 
|  | return -EINVAL; | 
|  | if (audit_enabled == AUDIT_LOCKED) { | 
|  | audit_log_common_recv_msg(&ab, AUDIT_CONFIG_CHANGE); | 
|  | audit_log_format(ab, " audit_enabled=%d res=0", audit_enabled); | 
|  | audit_log_end(ab); | 
|  | return -EPERM; | 
|  | } | 
|  | err = audit_rule_change(msg_type, NETLINK_CB(skb).portid, | 
|  | seq, data, nlmsg_len(nlh)); | 
|  | break; | 
|  | case AUDIT_LIST_RULES: | 
|  | err = audit_list_rules_send(skb, seq); | 
|  | break; | 
|  | case AUDIT_TRIM: | 
|  | audit_trim_trees(); | 
|  | audit_log_common_recv_msg(&ab, AUDIT_CONFIG_CHANGE); | 
|  | audit_log_format(ab, " op=trim res=1"); | 
|  | audit_log_end(ab); | 
|  | break; | 
|  | case AUDIT_MAKE_EQUIV: { | 
|  | void *bufp = data; | 
|  | u32 sizes[2]; | 
|  | size_t msglen = nlmsg_len(nlh); | 
|  | char *old, *new; | 
|  |  | 
|  | err = -EINVAL; | 
|  | if (msglen < 2 * sizeof(u32)) | 
|  | break; | 
|  | memcpy(sizes, bufp, 2 * sizeof(u32)); | 
|  | bufp += 2 * sizeof(u32); | 
|  | msglen -= 2 * sizeof(u32); | 
|  | old = audit_unpack_string(&bufp, &msglen, sizes[0]); | 
|  | if (IS_ERR(old)) { | 
|  | err = PTR_ERR(old); | 
|  | break; | 
|  | } | 
|  | new = audit_unpack_string(&bufp, &msglen, sizes[1]); | 
|  | if (IS_ERR(new)) { | 
|  | err = PTR_ERR(new); | 
|  | kfree(old); | 
|  | break; | 
|  | } | 
|  | /* OK, here comes... */ | 
|  | err = audit_tag_tree(old, new); | 
|  |  | 
|  | audit_log_common_recv_msg(&ab, AUDIT_CONFIG_CHANGE); | 
|  |  | 
|  | audit_log_format(ab, " op=make_equiv old="); | 
|  | audit_log_untrustedstring(ab, old); | 
|  | audit_log_format(ab, " new="); | 
|  | audit_log_untrustedstring(ab, new); | 
|  | audit_log_format(ab, " res=%d", !err); | 
|  | audit_log_end(ab); | 
|  | kfree(old); | 
|  | kfree(new); | 
|  | break; | 
|  | } | 
|  | case AUDIT_SIGNAL_INFO: | 
|  | len = 0; | 
|  | if (audit_sig_sid) { | 
|  | err = security_secid_to_secctx(audit_sig_sid, &ctx, &len); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  | sig_data = kmalloc(sizeof(*sig_data) + len, GFP_KERNEL); | 
|  | if (!sig_data) { | 
|  | if (audit_sig_sid) | 
|  | security_release_secctx(ctx, len); | 
|  | return -ENOMEM; | 
|  | } | 
|  | sig_data->uid = from_kuid(&init_user_ns, audit_sig_uid); | 
|  | sig_data->pid = audit_sig_pid; | 
|  | if (audit_sig_sid) { | 
|  | memcpy(sig_data->ctx, ctx, len); | 
|  | security_release_secctx(ctx, len); | 
|  | } | 
|  | audit_send_reply(skb, seq, AUDIT_SIGNAL_INFO, 0, 0, | 
|  | sig_data, sizeof(*sig_data) + len); | 
|  | kfree(sig_data); | 
|  | break; | 
|  | case AUDIT_TTY_GET: { | 
|  | struct audit_tty_status s; | 
|  | struct task_struct *tsk = current; | 
|  |  | 
|  | spin_lock(&tsk->sighand->siglock); | 
|  | s.enabled = tsk->signal->audit_tty; | 
|  | s.log_passwd = tsk->signal->audit_tty_log_passwd; | 
|  | spin_unlock(&tsk->sighand->siglock); | 
|  |  | 
|  | audit_send_reply(skb, seq, AUDIT_TTY_GET, 0, 0, &s, sizeof(s)); | 
|  | break; | 
|  | } | 
|  | case AUDIT_TTY_SET: { | 
|  | struct audit_tty_status s, old; | 
|  | struct task_struct *tsk = current; | 
|  | struct audit_buffer	*ab; | 
|  |  | 
|  | memset(&s, 0, sizeof(s)); | 
|  | /* guard against past and future API changes */ | 
|  | memcpy(&s, data, min_t(size_t, sizeof(s), nlmsg_len(nlh))); | 
|  | /* check if new data is valid */ | 
|  | if ((s.enabled != 0 && s.enabled != 1) || | 
|  | (s.log_passwd != 0 && s.log_passwd != 1)) | 
|  | err = -EINVAL; | 
|  |  | 
|  | spin_lock(&tsk->sighand->siglock); | 
|  | old.enabled = tsk->signal->audit_tty; | 
|  | old.log_passwd = tsk->signal->audit_tty_log_passwd; | 
|  | if (!err) { | 
|  | tsk->signal->audit_tty = s.enabled; | 
|  | tsk->signal->audit_tty_log_passwd = s.log_passwd; | 
|  | } | 
|  | spin_unlock(&tsk->sighand->siglock); | 
|  |  | 
|  | audit_log_common_recv_msg(&ab, AUDIT_CONFIG_CHANGE); | 
|  | audit_log_format(ab, " op=tty_set old-enabled=%d new-enabled=%d" | 
|  | " old-log_passwd=%d new-log_passwd=%d res=%d", | 
|  | old.enabled, s.enabled, old.log_passwd, | 
|  | s.log_passwd, !err); | 
|  | audit_log_end(ab); | 
|  | break; | 
|  | } | 
|  | default: | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return err < 0 ? err : 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get message from skb.  Each message is processed by audit_receive_msg. | 
|  | * Malformed skbs with wrong length are discarded silently. | 
|  | */ | 
|  | static void audit_receive_skb(struct sk_buff *skb) | 
|  | { | 
|  | struct nlmsghdr *nlh; | 
|  | /* | 
|  | * len MUST be signed for nlmsg_next to be able to dec it below 0 | 
|  | * if the nlmsg_len was not aligned | 
|  | */ | 
|  | int len; | 
|  | int err; | 
|  |  | 
|  | nlh = nlmsg_hdr(skb); | 
|  | len = skb->len; | 
|  |  | 
|  | while (nlmsg_ok(nlh, len)) { | 
|  | err = audit_receive_msg(skb, nlh); | 
|  | /* if err or if this message says it wants a response */ | 
|  | if (err || (nlh->nlmsg_flags & NLM_F_ACK)) | 
|  | netlink_ack(skb, nlh, err); | 
|  |  | 
|  | nlh = nlmsg_next(nlh, &len); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Receive messages from netlink socket. */ | 
|  | static void audit_receive(struct sk_buff  *skb) | 
|  | { | 
|  | mutex_lock(&audit_cmd_mutex); | 
|  | audit_receive_skb(skb); | 
|  | mutex_unlock(&audit_cmd_mutex); | 
|  | } | 
|  |  | 
|  | static int __net_init audit_net_init(struct net *net) | 
|  | { | 
|  | struct netlink_kernel_cfg cfg = { | 
|  | .input	= audit_receive, | 
|  | }; | 
|  |  | 
|  | struct audit_net *aunet = net_generic(net, audit_net_id); | 
|  |  | 
|  | aunet->nlsk = netlink_kernel_create(net, NETLINK_AUDIT, &cfg); | 
|  | if (aunet->nlsk == NULL) { | 
|  | audit_panic("cannot initialize netlink socket in namespace"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | aunet->nlsk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __net_exit audit_net_exit(struct net *net) | 
|  | { | 
|  | struct audit_net *aunet = net_generic(net, audit_net_id); | 
|  | struct sock *sock = aunet->nlsk; | 
|  | if (sock == audit_sock) { | 
|  | audit_pid = 0; | 
|  | audit_sock = NULL; | 
|  | } | 
|  |  | 
|  | RCU_INIT_POINTER(aunet->nlsk, NULL); | 
|  | synchronize_net(); | 
|  | netlink_kernel_release(sock); | 
|  | } | 
|  |  | 
|  | static struct pernet_operations audit_net_ops __net_initdata = { | 
|  | .init = audit_net_init, | 
|  | .exit = audit_net_exit, | 
|  | .id = &audit_net_id, | 
|  | .size = sizeof(struct audit_net), | 
|  | }; | 
|  |  | 
|  | /* Initialize audit support at boot time. */ | 
|  | static int __init audit_init(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (audit_initialized == AUDIT_DISABLED) | 
|  | return 0; | 
|  |  | 
|  | pr_info("initializing netlink subsys (%s)\n", | 
|  | audit_default ? "enabled" : "disabled"); | 
|  | register_pernet_subsys(&audit_net_ops); | 
|  |  | 
|  | skb_queue_head_init(&audit_skb_queue); | 
|  | skb_queue_head_init(&audit_skb_hold_queue); | 
|  | audit_initialized = AUDIT_INITIALIZED; | 
|  | audit_enabled = audit_default; | 
|  | audit_ever_enabled |= !!audit_default; | 
|  |  | 
|  | audit_log(NULL, GFP_KERNEL, AUDIT_KERNEL, "initialized"); | 
|  |  | 
|  | for (i = 0; i < AUDIT_INODE_BUCKETS; i++) | 
|  | INIT_LIST_HEAD(&audit_inode_hash[i]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | __initcall(audit_init); | 
|  |  | 
|  | /* Process kernel command-line parameter at boot time.  audit=0 or audit=1. */ | 
|  | static int __init audit_enable(char *str) | 
|  | { | 
|  | audit_default = !!simple_strtol(str, NULL, 0); | 
|  | if (!audit_default) | 
|  | audit_initialized = AUDIT_DISABLED; | 
|  |  | 
|  | pr_info("%s\n", audit_default ? | 
|  | "enabled (after initialization)" : "disabled (until reboot)"); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | __setup("audit=", audit_enable); | 
|  |  | 
|  | /* Process kernel command-line parameter at boot time. | 
|  | * audit_backlog_limit=<n> */ | 
|  | static int __init audit_backlog_limit_set(char *str) | 
|  | { | 
|  | u32 audit_backlog_limit_arg; | 
|  |  | 
|  | pr_info("audit_backlog_limit: "); | 
|  | if (kstrtouint(str, 0, &audit_backlog_limit_arg)) { | 
|  | pr_cont("using default of %u, unable to parse %s\n", | 
|  | audit_backlog_limit, str); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | audit_backlog_limit = audit_backlog_limit_arg; | 
|  | pr_cont("%d\n", audit_backlog_limit); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | __setup("audit_backlog_limit=", audit_backlog_limit_set); | 
|  |  | 
|  | static void audit_buffer_free(struct audit_buffer *ab) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!ab) | 
|  | return; | 
|  |  | 
|  | if (ab->skb) | 
|  | kfree_skb(ab->skb); | 
|  |  | 
|  | spin_lock_irqsave(&audit_freelist_lock, flags); | 
|  | if (audit_freelist_count > AUDIT_MAXFREE) | 
|  | kfree(ab); | 
|  | else { | 
|  | audit_freelist_count++; | 
|  | list_add(&ab->list, &audit_freelist); | 
|  | } | 
|  | spin_unlock_irqrestore(&audit_freelist_lock, flags); | 
|  | } | 
|  |  | 
|  | static struct audit_buffer * audit_buffer_alloc(struct audit_context *ctx, | 
|  | gfp_t gfp_mask, int type) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct audit_buffer *ab = NULL; | 
|  | struct nlmsghdr *nlh; | 
|  |  | 
|  | spin_lock_irqsave(&audit_freelist_lock, flags); | 
|  | if (!list_empty(&audit_freelist)) { | 
|  | ab = list_entry(audit_freelist.next, | 
|  | struct audit_buffer, list); | 
|  | list_del(&ab->list); | 
|  | --audit_freelist_count; | 
|  | } | 
|  | spin_unlock_irqrestore(&audit_freelist_lock, flags); | 
|  |  | 
|  | if (!ab) { | 
|  | ab = kmalloc(sizeof(*ab), gfp_mask); | 
|  | if (!ab) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ab->ctx = ctx; | 
|  | ab->gfp_mask = gfp_mask; | 
|  |  | 
|  | ab->skb = nlmsg_new(AUDIT_BUFSIZ, gfp_mask); | 
|  | if (!ab->skb) | 
|  | goto err; | 
|  |  | 
|  | nlh = nlmsg_put(ab->skb, 0, 0, type, 0, 0); | 
|  | if (!nlh) | 
|  | goto out_kfree_skb; | 
|  |  | 
|  | return ab; | 
|  |  | 
|  | out_kfree_skb: | 
|  | kfree_skb(ab->skb); | 
|  | ab->skb = NULL; | 
|  | err: | 
|  | audit_buffer_free(ab); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_serial - compute a serial number for the audit record | 
|  | * | 
|  | * Compute a serial number for the audit record.  Audit records are | 
|  | * written to user-space as soon as they are generated, so a complete | 
|  | * audit record may be written in several pieces.  The timestamp of the | 
|  | * record and this serial number are used by the user-space tools to | 
|  | * determine which pieces belong to the same audit record.  The | 
|  | * (timestamp,serial) tuple is unique for each syscall and is live from | 
|  | * syscall entry to syscall exit. | 
|  | * | 
|  | * NOTE: Another possibility is to store the formatted records off the | 
|  | * audit context (for those records that have a context), and emit them | 
|  | * all at syscall exit.  However, this could delay the reporting of | 
|  | * significant errors until syscall exit (or never, if the system | 
|  | * halts). | 
|  | */ | 
|  | unsigned int audit_serial(void) | 
|  | { | 
|  | static DEFINE_SPINLOCK(serial_lock); | 
|  | static unsigned int serial = 0; | 
|  |  | 
|  | unsigned long flags; | 
|  | unsigned int ret; | 
|  |  | 
|  | spin_lock_irqsave(&serial_lock, flags); | 
|  | do { | 
|  | ret = ++serial; | 
|  | } while (unlikely(!ret)); | 
|  | spin_unlock_irqrestore(&serial_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline void audit_get_stamp(struct audit_context *ctx, | 
|  | struct timespec *t, unsigned int *serial) | 
|  | { | 
|  | if (!ctx || !auditsc_get_stamp(ctx, t, serial)) { | 
|  | *t = CURRENT_TIME; | 
|  | *serial = audit_serial(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Wait for auditd to drain the queue a little | 
|  | */ | 
|  | static long wait_for_auditd(long sleep_time) | 
|  | { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  | set_current_state(TASK_UNINTERRUPTIBLE); | 
|  | add_wait_queue_exclusive(&audit_backlog_wait, &wait); | 
|  |  | 
|  | if (audit_backlog_limit && | 
|  | skb_queue_len(&audit_skb_queue) > audit_backlog_limit) | 
|  | sleep_time = schedule_timeout(sleep_time); | 
|  |  | 
|  | __set_current_state(TASK_RUNNING); | 
|  | remove_wait_queue(&audit_backlog_wait, &wait); | 
|  |  | 
|  | return sleep_time; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_start - obtain an audit buffer | 
|  | * @ctx: audit_context (may be NULL) | 
|  | * @gfp_mask: type of allocation | 
|  | * @type: audit message type | 
|  | * | 
|  | * Returns audit_buffer pointer on success or NULL on error. | 
|  | * | 
|  | * Obtain an audit buffer.  This routine does locking to obtain the | 
|  | * audit buffer, but then no locking is required for calls to | 
|  | * audit_log_*format.  If the task (ctx) is a task that is currently in a | 
|  | * syscall, then the syscall is marked as auditable and an audit record | 
|  | * will be written at syscall exit.  If there is no associated task, then | 
|  | * task context (ctx) should be NULL. | 
|  | */ | 
|  | struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, | 
|  | int type) | 
|  | { | 
|  | struct audit_buffer	*ab	= NULL; | 
|  | struct timespec		t; | 
|  | unsigned int		uninitialized_var(serial); | 
|  | int reserve = 5; /* Allow atomic callers to go up to five | 
|  | entries over the normal backlog limit */ | 
|  | unsigned long timeout_start = jiffies; | 
|  |  | 
|  | if (audit_initialized != AUDIT_INITIALIZED) | 
|  | return NULL; | 
|  |  | 
|  | if (unlikely(audit_filter_type(type))) | 
|  | return NULL; | 
|  |  | 
|  | if (gfp_mask & __GFP_WAIT) { | 
|  | if (audit_pid && audit_pid == current->pid) | 
|  | gfp_mask &= ~__GFP_WAIT; | 
|  | else | 
|  | reserve = 0; | 
|  | } | 
|  |  | 
|  | while (audit_backlog_limit | 
|  | && skb_queue_len(&audit_skb_queue) > audit_backlog_limit + reserve) { | 
|  | if (gfp_mask & __GFP_WAIT && audit_backlog_wait_time) { | 
|  | long sleep_time; | 
|  |  | 
|  | sleep_time = timeout_start + audit_backlog_wait_time - jiffies; | 
|  | if (sleep_time > 0) { | 
|  | sleep_time = wait_for_auditd(sleep_time); | 
|  | if (sleep_time > 0) | 
|  | continue; | 
|  | } | 
|  | } | 
|  | if (audit_rate_check() && printk_ratelimit()) | 
|  | pr_warn("audit_backlog=%d > audit_backlog_limit=%d\n", | 
|  | skb_queue_len(&audit_skb_queue), | 
|  | audit_backlog_limit); | 
|  | audit_log_lost("backlog limit exceeded"); | 
|  | audit_backlog_wait_time = audit_backlog_wait_overflow; | 
|  | wake_up(&audit_backlog_wait); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME; | 
|  |  | 
|  | ab = audit_buffer_alloc(ctx, gfp_mask, type); | 
|  | if (!ab) { | 
|  | audit_log_lost("out of memory in audit_log_start"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | audit_get_stamp(ab->ctx, &t, &serial); | 
|  |  | 
|  | audit_log_format(ab, "audit(%lu.%03lu:%u): ", | 
|  | t.tv_sec, t.tv_nsec/1000000, serial); | 
|  | return ab; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_expand - expand skb in the audit buffer | 
|  | * @ab: audit_buffer | 
|  | * @extra: space to add at tail of the skb | 
|  | * | 
|  | * Returns 0 (no space) on failed expansion, or available space if | 
|  | * successful. | 
|  | */ | 
|  | static inline int audit_expand(struct audit_buffer *ab, int extra) | 
|  | { | 
|  | struct sk_buff *skb = ab->skb; | 
|  | int oldtail = skb_tailroom(skb); | 
|  | int ret = pskb_expand_head(skb, 0, extra, ab->gfp_mask); | 
|  | int newtail = skb_tailroom(skb); | 
|  |  | 
|  | if (ret < 0) { | 
|  | audit_log_lost("out of memory in audit_expand"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | skb->truesize += newtail - oldtail; | 
|  | return newtail; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Format an audit message into the audit buffer.  If there isn't enough | 
|  | * room in the audit buffer, more room will be allocated and vsnprint | 
|  | * will be called a second time.  Currently, we assume that a printk | 
|  | * can't format message larger than 1024 bytes, so we don't either. | 
|  | */ | 
|  | static void audit_log_vformat(struct audit_buffer *ab, const char *fmt, | 
|  | va_list args) | 
|  | { | 
|  | int len, avail; | 
|  | struct sk_buff *skb; | 
|  | va_list args2; | 
|  |  | 
|  | if (!ab) | 
|  | return; | 
|  |  | 
|  | BUG_ON(!ab->skb); | 
|  | skb = ab->skb; | 
|  | avail = skb_tailroom(skb); | 
|  | if (avail == 0) { | 
|  | avail = audit_expand(ab, AUDIT_BUFSIZ); | 
|  | if (!avail) | 
|  | goto out; | 
|  | } | 
|  | va_copy(args2, args); | 
|  | len = vsnprintf(skb_tail_pointer(skb), avail, fmt, args); | 
|  | if (len >= avail) { | 
|  | /* The printk buffer is 1024 bytes long, so if we get | 
|  | * here and AUDIT_BUFSIZ is at least 1024, then we can | 
|  | * log everything that printk could have logged. */ | 
|  | avail = audit_expand(ab, | 
|  | max_t(unsigned, AUDIT_BUFSIZ, 1+len-avail)); | 
|  | if (!avail) | 
|  | goto out_va_end; | 
|  | len = vsnprintf(skb_tail_pointer(skb), avail, fmt, args2); | 
|  | } | 
|  | if (len > 0) | 
|  | skb_put(skb, len); | 
|  | out_va_end: | 
|  | va_end(args2); | 
|  | out: | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_format - format a message into the audit buffer. | 
|  | * @ab: audit_buffer | 
|  | * @fmt: format string | 
|  | * @...: optional parameters matching @fmt string | 
|  | * | 
|  | * All the work is done in audit_log_vformat. | 
|  | */ | 
|  | void audit_log_format(struct audit_buffer *ab, const char *fmt, ...) | 
|  | { | 
|  | va_list args; | 
|  |  | 
|  | if (!ab) | 
|  | return; | 
|  | va_start(args, fmt); | 
|  | audit_log_vformat(ab, fmt, args); | 
|  | va_end(args); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_hex - convert a buffer to hex and append it to the audit skb | 
|  | * @ab: the audit_buffer | 
|  | * @buf: buffer to convert to hex | 
|  | * @len: length of @buf to be converted | 
|  | * | 
|  | * No return value; failure to expand is silently ignored. | 
|  | * | 
|  | * This function will take the passed buf and convert it into a string of | 
|  | * ascii hex digits. The new string is placed onto the skb. | 
|  | */ | 
|  | void audit_log_n_hex(struct audit_buffer *ab, const unsigned char *buf, | 
|  | size_t len) | 
|  | { | 
|  | int i, avail, new_len; | 
|  | unsigned char *ptr; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!ab) | 
|  | return; | 
|  |  | 
|  | BUG_ON(!ab->skb); | 
|  | skb = ab->skb; | 
|  | avail = skb_tailroom(skb); | 
|  | new_len = len<<1; | 
|  | if (new_len >= avail) { | 
|  | /* Round the buffer request up to the next multiple */ | 
|  | new_len = AUDIT_BUFSIZ*(((new_len-avail)/AUDIT_BUFSIZ) + 1); | 
|  | avail = audit_expand(ab, new_len); | 
|  | if (!avail) | 
|  | return; | 
|  | } | 
|  |  | 
|  | ptr = skb_tail_pointer(skb); | 
|  | for (i = 0; i < len; i++) | 
|  | ptr = hex_byte_pack_upper(ptr, buf[i]); | 
|  | *ptr = 0; | 
|  | skb_put(skb, len << 1); /* new string is twice the old string */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Format a string of no more than slen characters into the audit buffer, | 
|  | * enclosed in quote marks. | 
|  | */ | 
|  | void audit_log_n_string(struct audit_buffer *ab, const char *string, | 
|  | size_t slen) | 
|  | { | 
|  | int avail, new_len; | 
|  | unsigned char *ptr; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!ab) | 
|  | return; | 
|  |  | 
|  | BUG_ON(!ab->skb); | 
|  | skb = ab->skb; | 
|  | avail = skb_tailroom(skb); | 
|  | new_len = slen + 3;	/* enclosing quotes + null terminator */ | 
|  | if (new_len > avail) { | 
|  | avail = audit_expand(ab, new_len); | 
|  | if (!avail) | 
|  | return; | 
|  | } | 
|  | ptr = skb_tail_pointer(skb); | 
|  | *ptr++ = '"'; | 
|  | memcpy(ptr, string, slen); | 
|  | ptr += slen; | 
|  | *ptr++ = '"'; | 
|  | *ptr = 0; | 
|  | skb_put(skb, slen + 2);	/* don't include null terminator */ | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_string_contains_control - does a string need to be logged in hex | 
|  | * @string: string to be checked | 
|  | * @len: max length of the string to check | 
|  | */ | 
|  | int audit_string_contains_control(const char *string, size_t len) | 
|  | { | 
|  | const unsigned char *p; | 
|  | for (p = string; p < (const unsigned char *)string + len; p++) { | 
|  | if (*p == '"' || *p < 0x21 || *p > 0x7e) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_n_untrustedstring - log a string that may contain random characters | 
|  | * @ab: audit_buffer | 
|  | * @len: length of string (not including trailing null) | 
|  | * @string: string to be logged | 
|  | * | 
|  | * This code will escape a string that is passed to it if the string | 
|  | * contains a control character, unprintable character, double quote mark, | 
|  | * or a space. Unescaped strings will start and end with a double quote mark. | 
|  | * Strings that are escaped are printed in hex (2 digits per char). | 
|  | * | 
|  | * The caller specifies the number of characters in the string to log, which may | 
|  | * or may not be the entire string. | 
|  | */ | 
|  | void audit_log_n_untrustedstring(struct audit_buffer *ab, const char *string, | 
|  | size_t len) | 
|  | { | 
|  | if (audit_string_contains_control(string, len)) | 
|  | audit_log_n_hex(ab, string, len); | 
|  | else | 
|  | audit_log_n_string(ab, string, len); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_untrustedstring - log a string that may contain random characters | 
|  | * @ab: audit_buffer | 
|  | * @string: string to be logged | 
|  | * | 
|  | * Same as audit_log_n_untrustedstring(), except that strlen is used to | 
|  | * determine string length. | 
|  | */ | 
|  | void audit_log_untrustedstring(struct audit_buffer *ab, const char *string) | 
|  | { | 
|  | audit_log_n_untrustedstring(ab, string, strlen(string)); | 
|  | } | 
|  |  | 
|  | /* This is a helper-function to print the escaped d_path */ | 
|  | void audit_log_d_path(struct audit_buffer *ab, const char *prefix, | 
|  | const struct path *path) | 
|  | { | 
|  | char *p, *pathname; | 
|  |  | 
|  | if (prefix) | 
|  | audit_log_format(ab, "%s", prefix); | 
|  |  | 
|  | /* We will allow 11 spaces for ' (deleted)' to be appended */ | 
|  | pathname = kmalloc(PATH_MAX+11, ab->gfp_mask); | 
|  | if (!pathname) { | 
|  | audit_log_string(ab, "<no_memory>"); | 
|  | return; | 
|  | } | 
|  | p = d_path(path, pathname, PATH_MAX+11); | 
|  | if (IS_ERR(p)) { /* Should never happen since we send PATH_MAX */ | 
|  | /* FIXME: can we save some information here? */ | 
|  | audit_log_string(ab, "<too_long>"); | 
|  | } else | 
|  | audit_log_untrustedstring(ab, p); | 
|  | kfree(pathname); | 
|  | } | 
|  |  | 
|  | void audit_log_session_info(struct audit_buffer *ab) | 
|  | { | 
|  | unsigned int sessionid = audit_get_sessionid(current); | 
|  | uid_t auid = from_kuid(&init_user_ns, audit_get_loginuid(current)); | 
|  |  | 
|  | audit_log_format(ab, " auid=%u ses=%u", auid, sessionid); | 
|  | } | 
|  |  | 
|  | void audit_log_key(struct audit_buffer *ab, char *key) | 
|  | { | 
|  | audit_log_format(ab, " key="); | 
|  | if (key) | 
|  | audit_log_untrustedstring(ab, key); | 
|  | else | 
|  | audit_log_format(ab, "(null)"); | 
|  | } | 
|  |  | 
|  | void audit_log_cap(struct audit_buffer *ab, char *prefix, kernel_cap_t *cap) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | audit_log_format(ab, " %s=", prefix); | 
|  | CAP_FOR_EACH_U32(i) { | 
|  | audit_log_format(ab, "%08x", | 
|  | cap->cap[(_KERNEL_CAPABILITY_U32S-1) - i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | void audit_log_fcaps(struct audit_buffer *ab, struct audit_names *name) | 
|  | { | 
|  | kernel_cap_t *perm = &name->fcap.permitted; | 
|  | kernel_cap_t *inh = &name->fcap.inheritable; | 
|  | int log = 0; | 
|  |  | 
|  | if (!cap_isclear(*perm)) { | 
|  | audit_log_cap(ab, "cap_fp", perm); | 
|  | log = 1; | 
|  | } | 
|  | if (!cap_isclear(*inh)) { | 
|  | audit_log_cap(ab, "cap_fi", inh); | 
|  | log = 1; | 
|  | } | 
|  |  | 
|  | if (log) | 
|  | audit_log_format(ab, " cap_fe=%d cap_fver=%x", | 
|  | name->fcap.fE, name->fcap_ver); | 
|  | } | 
|  |  | 
|  | static inline int audit_copy_fcaps(struct audit_names *name, | 
|  | const struct dentry *dentry) | 
|  | { | 
|  | struct cpu_vfs_cap_data caps; | 
|  | int rc; | 
|  |  | 
|  | if (!dentry) | 
|  | return 0; | 
|  |  | 
|  | rc = get_vfs_caps_from_disk(dentry, &caps); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | name->fcap.permitted = caps.permitted; | 
|  | name->fcap.inheritable = caps.inheritable; | 
|  | name->fcap.fE = !!(caps.magic_etc & VFS_CAP_FLAGS_EFFECTIVE); | 
|  | name->fcap_ver = (caps.magic_etc & VFS_CAP_REVISION_MASK) >> | 
|  | VFS_CAP_REVISION_SHIFT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Copy inode data into an audit_names. */ | 
|  | void audit_copy_inode(struct audit_names *name, const struct dentry *dentry, | 
|  | const struct inode *inode) | 
|  | { | 
|  | name->ino   = inode->i_ino; | 
|  | name->dev   = inode->i_sb->s_dev; | 
|  | name->mode  = inode->i_mode; | 
|  | name->uid   = inode->i_uid; | 
|  | name->gid   = inode->i_gid; | 
|  | name->rdev  = inode->i_rdev; | 
|  | security_inode_getsecid(inode, &name->osid); | 
|  | audit_copy_fcaps(name, dentry); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_name - produce AUDIT_PATH record from struct audit_names | 
|  | * @context: audit_context for the task | 
|  | * @n: audit_names structure with reportable details | 
|  | * @path: optional path to report instead of audit_names->name | 
|  | * @record_num: record number to report when handling a list of names | 
|  | * @call_panic: optional pointer to int that will be updated if secid fails | 
|  | */ | 
|  | void audit_log_name(struct audit_context *context, struct audit_names *n, | 
|  | struct path *path, int record_num, int *call_panic) | 
|  | { | 
|  | struct audit_buffer *ab; | 
|  | ab = audit_log_start(context, GFP_KERNEL, AUDIT_PATH); | 
|  | if (!ab) | 
|  | return; | 
|  |  | 
|  | audit_log_format(ab, "item=%d", record_num); | 
|  |  | 
|  | if (path) | 
|  | audit_log_d_path(ab, " name=", path); | 
|  | else if (n->name) { | 
|  | switch (n->name_len) { | 
|  | case AUDIT_NAME_FULL: | 
|  | /* log the full path */ | 
|  | audit_log_format(ab, " name="); | 
|  | audit_log_untrustedstring(ab, n->name->name); | 
|  | break; | 
|  | case 0: | 
|  | /* name was specified as a relative path and the | 
|  | * directory component is the cwd */ | 
|  | audit_log_d_path(ab, " name=", &context->pwd); | 
|  | break; | 
|  | default: | 
|  | /* log the name's directory component */ | 
|  | audit_log_format(ab, " name="); | 
|  | audit_log_n_untrustedstring(ab, n->name->name, | 
|  | n->name_len); | 
|  | } | 
|  | } else | 
|  | audit_log_format(ab, " name=(null)"); | 
|  |  | 
|  | if (n->ino != (unsigned long)-1) { | 
|  | audit_log_format(ab, " inode=%lu" | 
|  | " dev=%02x:%02x mode=%#ho" | 
|  | " ouid=%u ogid=%u rdev=%02x:%02x", | 
|  | n->ino, | 
|  | MAJOR(n->dev), | 
|  | MINOR(n->dev), | 
|  | n->mode, | 
|  | from_kuid(&init_user_ns, n->uid), | 
|  | from_kgid(&init_user_ns, n->gid), | 
|  | MAJOR(n->rdev), | 
|  | MINOR(n->rdev)); | 
|  | } | 
|  | if (n->osid != 0) { | 
|  | char *ctx = NULL; | 
|  | u32 len; | 
|  | if (security_secid_to_secctx( | 
|  | n->osid, &ctx, &len)) { | 
|  | audit_log_format(ab, " osid=%u", n->osid); | 
|  | if (call_panic) | 
|  | *call_panic = 2; | 
|  | } else { | 
|  | audit_log_format(ab, " obj=%s", ctx); | 
|  | security_release_secctx(ctx, len); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* log the audit_names record type */ | 
|  | audit_log_format(ab, " nametype="); | 
|  | switch(n->type) { | 
|  | case AUDIT_TYPE_NORMAL: | 
|  | audit_log_format(ab, "NORMAL"); | 
|  | break; | 
|  | case AUDIT_TYPE_PARENT: | 
|  | audit_log_format(ab, "PARENT"); | 
|  | break; | 
|  | case AUDIT_TYPE_CHILD_DELETE: | 
|  | audit_log_format(ab, "DELETE"); | 
|  | break; | 
|  | case AUDIT_TYPE_CHILD_CREATE: | 
|  | audit_log_format(ab, "CREATE"); | 
|  | break; | 
|  | default: | 
|  | audit_log_format(ab, "UNKNOWN"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | audit_log_fcaps(ab, n); | 
|  | audit_log_end(ab); | 
|  | } | 
|  |  | 
|  | int audit_log_task_context(struct audit_buffer *ab) | 
|  | { | 
|  | char *ctx = NULL; | 
|  | unsigned len; | 
|  | int error; | 
|  | u32 sid; | 
|  |  | 
|  | security_task_getsecid(current, &sid); | 
|  | if (!sid) | 
|  | return 0; | 
|  |  | 
|  | error = security_secid_to_secctx(sid, &ctx, &len); | 
|  | if (error) { | 
|  | if (error != -EINVAL) | 
|  | goto error_path; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | audit_log_format(ab, " subj=%s", ctx); | 
|  | security_release_secctx(ctx, len); | 
|  | return 0; | 
|  |  | 
|  | error_path: | 
|  | audit_panic("error in audit_log_task_context"); | 
|  | return error; | 
|  | } | 
|  | EXPORT_SYMBOL(audit_log_task_context); | 
|  |  | 
|  | void audit_log_task_info(struct audit_buffer *ab, struct task_struct *tsk) | 
|  | { | 
|  | const struct cred *cred; | 
|  | char name[sizeof(tsk->comm)]; | 
|  | struct mm_struct *mm = tsk->mm; | 
|  | char *tty; | 
|  |  | 
|  | if (!ab) | 
|  | return; | 
|  |  | 
|  | /* tsk == current */ | 
|  | cred = current_cred(); | 
|  |  | 
|  | spin_lock_irq(&tsk->sighand->siglock); | 
|  | if (tsk->signal && tsk->signal->tty && tsk->signal->tty->name) | 
|  | tty = tsk->signal->tty->name; | 
|  | else | 
|  | tty = "(none)"; | 
|  | spin_unlock_irq(&tsk->sighand->siglock); | 
|  |  | 
|  | audit_log_format(ab, | 
|  | " ppid=%d pid=%d auid=%u uid=%u gid=%u" | 
|  | " euid=%u suid=%u fsuid=%u" | 
|  | " egid=%u sgid=%u fsgid=%u tty=%s ses=%u", | 
|  | task_ppid_nr(tsk), | 
|  | task_pid_nr(tsk), | 
|  | from_kuid(&init_user_ns, audit_get_loginuid(tsk)), | 
|  | from_kuid(&init_user_ns, cred->uid), | 
|  | from_kgid(&init_user_ns, cred->gid), | 
|  | from_kuid(&init_user_ns, cred->euid), | 
|  | from_kuid(&init_user_ns, cred->suid), | 
|  | from_kuid(&init_user_ns, cred->fsuid), | 
|  | from_kgid(&init_user_ns, cred->egid), | 
|  | from_kgid(&init_user_ns, cred->sgid), | 
|  | from_kgid(&init_user_ns, cred->fsgid), | 
|  | tty, audit_get_sessionid(tsk)); | 
|  |  | 
|  | get_task_comm(name, tsk); | 
|  | audit_log_format(ab, " comm="); | 
|  | audit_log_untrustedstring(ab, name); | 
|  |  | 
|  | if (mm) { | 
|  | down_read(&mm->mmap_sem); | 
|  | if (mm->exe_file) | 
|  | audit_log_d_path(ab, " exe=", &mm->exe_file->f_path); | 
|  | up_read(&mm->mmap_sem); | 
|  | } else | 
|  | audit_log_format(ab, " exe=(null)"); | 
|  | audit_log_task_context(ab); | 
|  | } | 
|  | EXPORT_SYMBOL(audit_log_task_info); | 
|  |  | 
|  | /** | 
|  | * audit_log_link_denied - report a link restriction denial | 
|  | * @operation: specific link opreation | 
|  | * @link: the path that triggered the restriction | 
|  | */ | 
|  | void audit_log_link_denied(const char *operation, struct path *link) | 
|  | { | 
|  | struct audit_buffer *ab; | 
|  | struct audit_names *name; | 
|  |  | 
|  | name = kzalloc(sizeof(*name), GFP_NOFS); | 
|  | if (!name) | 
|  | return; | 
|  |  | 
|  | /* Generate AUDIT_ANOM_LINK with subject, operation, outcome. */ | 
|  | ab = audit_log_start(current->audit_context, GFP_KERNEL, | 
|  | AUDIT_ANOM_LINK); | 
|  | if (!ab) | 
|  | goto out; | 
|  | audit_log_format(ab, "op=%s", operation); | 
|  | audit_log_task_info(ab, current); | 
|  | audit_log_format(ab, " res=0"); | 
|  | audit_log_end(ab); | 
|  |  | 
|  | /* Generate AUDIT_PATH record with object. */ | 
|  | name->type = AUDIT_TYPE_NORMAL; | 
|  | audit_copy_inode(name, link->dentry, link->dentry->d_inode); | 
|  | audit_log_name(current->audit_context, name, link, 0, NULL); | 
|  | out: | 
|  | kfree(name); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log_end - end one audit record | 
|  | * @ab: the audit_buffer | 
|  | * | 
|  | * The netlink_* functions cannot be called inside an irq context, so | 
|  | * the audit buffer is placed on a queue and a tasklet is scheduled to | 
|  | * remove them from the queue outside the irq context.  May be called in | 
|  | * any context. | 
|  | */ | 
|  | void audit_log_end(struct audit_buffer *ab) | 
|  | { | 
|  | if (!ab) | 
|  | return; | 
|  | if (!audit_rate_check()) { | 
|  | audit_log_lost("rate limit exceeded"); | 
|  | } else { | 
|  | struct nlmsghdr *nlh = nlmsg_hdr(ab->skb); | 
|  | nlh->nlmsg_len = ab->skb->len - NLMSG_HDRLEN; | 
|  |  | 
|  | if (audit_pid) { | 
|  | skb_queue_tail(&audit_skb_queue, ab->skb); | 
|  | wake_up_interruptible(&kauditd_wait); | 
|  | } else { | 
|  | audit_printk_skb(ab->skb); | 
|  | } | 
|  | ab->skb = NULL; | 
|  | } | 
|  | audit_buffer_free(ab); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * audit_log - Log an audit record | 
|  | * @ctx: audit context | 
|  | * @gfp_mask: type of allocation | 
|  | * @type: audit message type | 
|  | * @fmt: format string to use | 
|  | * @...: variable parameters matching the format string | 
|  | * | 
|  | * This is a convenience function that calls audit_log_start, | 
|  | * audit_log_vformat, and audit_log_end.  It may be called | 
|  | * in any context. | 
|  | */ | 
|  | void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type, | 
|  | const char *fmt, ...) | 
|  | { | 
|  | struct audit_buffer *ab; | 
|  | va_list args; | 
|  |  | 
|  | ab = audit_log_start(ctx, gfp_mask, type); | 
|  | if (ab) { | 
|  | va_start(args, fmt); | 
|  | audit_log_vformat(ab, fmt, args); | 
|  | va_end(args); | 
|  | audit_log_end(ab); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SECURITY | 
|  | /** | 
|  | * audit_log_secctx - Converts and logs SELinux context | 
|  | * @ab: audit_buffer | 
|  | * @secid: security number | 
|  | * | 
|  | * This is a helper function that calls security_secid_to_secctx to convert | 
|  | * secid to secctx and then adds the (converted) SELinux context to the audit | 
|  | * log by calling audit_log_format, thus also preventing leak of internal secid | 
|  | * to userspace. If secid cannot be converted audit_panic is called. | 
|  | */ | 
|  | void audit_log_secctx(struct audit_buffer *ab, u32 secid) | 
|  | { | 
|  | u32 len; | 
|  | char *secctx; | 
|  |  | 
|  | if (security_secid_to_secctx(secid, &secctx, &len)) { | 
|  | audit_panic("Cannot convert secid to context"); | 
|  | } else { | 
|  | audit_log_format(ab, " obj=%s", secctx); | 
|  | security_release_secctx(secctx, len); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(audit_log_secctx); | 
|  | #endif | 
|  |  | 
|  | EXPORT_SYMBOL(audit_log_start); | 
|  | EXPORT_SYMBOL(audit_log_end); | 
|  | EXPORT_SYMBOL(audit_log_format); | 
|  | EXPORT_SYMBOL(audit_log); |