| /* |
| * Copyright 2014 Carlo Caione <carlo@caione.org> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this library; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| /include/ "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&gic>; |
| |
| L2: l2-cache-controller@c4200000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0xc4200000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| gic: interrupt-controller@c4301000 { |
| compatible = "arm,cortex-a9-gic"; |
| reg = <0xc4301000 0x1000>, |
| <0xc4300100 0x0100>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| cbus: cbus@c1100000 { |
| compatible = "simple-bus"; |
| reg = <0xc1100000 0x200000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc1100000 0x200000>; |
| |
| hwrng: rng@8100 { |
| compatible = "amlogic,meson-rng"; |
| reg = <0x8100 0x8>; |
| }; |
| |
| uart_A: serial@84c0 { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; |
| reg = <0x84c0 0x18>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| uart_B: serial@84dc { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; |
| reg = <0x84dc 0x18>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| i2c_A: i2c@8500 { |
| compatible = "amlogic,meson6-i2c"; |
| reg = <0x8500 0x20>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pwm_ab: pwm@8550 { |
| compatible = "amlogic,meson-pwm"; |
| reg = <0x8550 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm_cd: pwm@8650 { |
| compatible = "amlogic,meson-pwm"; |
| reg = <0x8650 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| saradc: adc@8680 { |
| compatible = "amlogic,meson-saradc"; |
| reg = <0x8680 0x34>; |
| #io-channel-cells = <1>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| uart_C: serial@8700 { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; |
| reg = <0x8700 0x18>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| i2c_B: i2c@87c0 { |
| compatible = "amlogic,meson6-i2c"; |
| reg = <0x87c0 0x20>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb0_phy: phy@8800 { |
| compatible = "amlogic,meson-mx-usb2-phy"; |
| #phy-cells = <0>; |
| reg = <0x8800 0x20>; |
| status = "disabled"; |
| }; |
| |
| usb1_phy: phy@8820 { |
| compatible = "amlogic,meson-mx-usb2-phy"; |
| #phy-cells = <0>; |
| reg = <0x8820 0x20>; |
| status = "disabled"; |
| }; |
| |
| spifc: spi@8c80 { |
| compatible = "amlogic,meson6-spifc"; |
| reg = <0x8c80 0x80>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| wdt: watchdog@9900 { |
| compatible = "amlogic,meson6-wdt"; |
| reg = <0x9900 0x8>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| timer@9940 { |
| compatible = "amlogic,meson6-timer"; |
| reg = <0x9940 0x18>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| aobus: aobus@c8100000 { |
| compatible = "simple-bus"; |
| reg = <0xc8100000 0x100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc8100000 0x100000>; |
| |
| ir_receiver: ir-receiver@480 { |
| compatible= "amlogic,meson6-ir"; |
| reg = <0x480 0x20>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| uart_AO: serial@4c0 { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; |
| reg = <0x4c0 0x18>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| i2c_AO: i2c@500 { |
| compatible = "amlogic,meson6-i2c"; |
| reg = <0x500 0x20>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb0: usb@c9040000 { |
| compatible = "snps,dwc2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc9040000 0x40000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>; |
| phys = <&usb0_phy>; |
| phy-names = "usb2-phy"; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@c90c0000 { |
| compatible = "snps,dwc2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc90c0000 0x40000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; |
| phys = <&usb1_phy>; |
| phy-names = "usb2-phy"; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| ethmac: ethernet@c9410000 { |
| compatible = "amlogic,meson6-dwmac", "snps,dwmac"; |
| reg = <0xc9410000 0x10000 |
| 0xc1108108 0x4>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "macirq"; |
| status = "disabled"; |
| }; |
| |
| ahb_sram: sram@d9000000 { |
| compatible = "mmio-sram"; |
| reg = <0xd9000000 0x20000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xd9000000 0x20000>; |
| }; |
| }; |
| }; /* end of / */ |