| /* |
| * Copyright (C) 2015 Broadcom |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /** |
| * DOC: VC4 KMS |
| * |
| * This is the general code for implementing KMS mode setting that |
| * doesn't clearly associate with any of the other objects (plane, |
| * crtc, HDMI encoder). |
| */ |
| |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include "vc4_drv.h" |
| |
| static void vc4_output_poll_changed(struct drm_device *dev) |
| { |
| struct vc4_dev *vc4 = to_vc4_dev(dev); |
| |
| drm_fbdev_cma_hotplug_event(vc4->fbdev); |
| } |
| |
| static void |
| vc4_atomic_complete_commit(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct vc4_dev *vc4 = to_vc4_dev(dev); |
| |
| drm_atomic_helper_wait_for_fences(dev, state, false); |
| |
| drm_atomic_helper_wait_for_dependencies(state); |
| |
| drm_atomic_helper_commit_modeset_disables(dev, state); |
| |
| drm_atomic_helper_commit_planes(dev, state, 0); |
| |
| drm_atomic_helper_commit_modeset_enables(dev, state); |
| |
| /* Make sure that drm_atomic_helper_wait_for_vblanks() |
| * actually waits for vblank. If we're doing a full atomic |
| * modeset (as opposed to a vc4_update_plane() short circuit), |
| * then we need to wait for scanout to be done with our |
| * display lists before we free it and potentially reallocate |
| * and overwrite the dlist memory with a new modeset. |
| */ |
| state->legacy_cursor_update = false; |
| |
| drm_atomic_helper_commit_hw_done(state); |
| |
| drm_atomic_helper_wait_for_vblanks(dev, state); |
| |
| drm_atomic_helper_cleanup_planes(dev, state); |
| |
| drm_atomic_helper_commit_cleanup_done(state); |
| |
| drm_atomic_state_put(state); |
| |
| up(&vc4->async_modeset); |
| } |
| |
| static void commit_work(struct work_struct *work) |
| { |
| struct drm_atomic_state *state = container_of(work, |
| struct drm_atomic_state, |
| commit_work); |
| vc4_atomic_complete_commit(state); |
| } |
| |
| /** |
| * vc4_atomic_commit - commit validated state object |
| * @dev: DRM device |
| * @state: the driver state object |
| * @nonblock: nonblocking commit |
| * |
| * This function commits a with drm_atomic_helper_check() pre-validated state |
| * object. This can still fail when e.g. the framebuffer reservation fails. For |
| * now this doesn't implement asynchronous commits. |
| * |
| * RETURNS |
| * Zero for success or -errno. |
| */ |
| static int vc4_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *state, |
| bool nonblock) |
| { |
| struct vc4_dev *vc4 = to_vc4_dev(dev); |
| int ret; |
| |
| ret = drm_atomic_helper_setup_commit(state, nonblock); |
| if (ret) |
| return ret; |
| |
| INIT_WORK(&state->commit_work, commit_work); |
| |
| ret = down_interruptible(&vc4->async_modeset); |
| if (ret) |
| return ret; |
| |
| ret = drm_atomic_helper_prepare_planes(dev, state); |
| if (ret) { |
| up(&vc4->async_modeset); |
| return ret; |
| } |
| |
| if (!nonblock) { |
| ret = drm_atomic_helper_wait_for_fences(dev, state, true); |
| if (ret) { |
| drm_atomic_helper_cleanup_planes(dev, state); |
| up(&vc4->async_modeset); |
| return ret; |
| } |
| } |
| |
| /* |
| * This is the point of no return - everything below never fails except |
| * when the hw goes bonghits. Which means we can commit the new state on |
| * the software side now. |
| */ |
| |
| BUG_ON(drm_atomic_helper_swap_state(state, false) < 0); |
| |
| /* |
| * Everything below can be run asynchronously without the need to grab |
| * any modeset locks at all under one condition: It must be guaranteed |
| * that the asynchronous work has either been cancelled (if the driver |
| * supports it, which at least requires that the framebuffers get |
| * cleaned up with drm_atomic_helper_cleanup_planes()) or completed |
| * before the new state gets committed on the software side with |
| * drm_atomic_helper_swap_state(). |
| * |
| * This scheme allows new atomic state updates to be prepared and |
| * checked in parallel to the asynchronous completion of the previous |
| * update. Which is important since compositors need to figure out the |
| * composition of the next frame right after having submitted the |
| * current layout. |
| */ |
| |
| drm_atomic_state_get(state); |
| if (nonblock) |
| queue_work(system_unbound_wq, &state->commit_work); |
| else |
| vc4_atomic_complete_commit(state); |
| |
| return 0; |
| } |
| |
| static struct drm_framebuffer *vc4_fb_create(struct drm_device *dev, |
| struct drm_file *file_priv, |
| const struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct drm_mode_fb_cmd2 mode_cmd_local; |
| |
| /* If the user didn't specify a modifier, use the |
| * vc4_set_tiling_ioctl() state for the BO. |
| */ |
| if (!(mode_cmd->flags & DRM_MODE_FB_MODIFIERS)) { |
| struct drm_gem_object *gem_obj; |
| struct vc4_bo *bo; |
| |
| gem_obj = drm_gem_object_lookup(file_priv, |
| mode_cmd->handles[0]); |
| if (!gem_obj) { |
| DRM_DEBUG("Failed to look up GEM BO %d\n", |
| mode_cmd->handles[0]); |
| return ERR_PTR(-ENOENT); |
| } |
| bo = to_vc4_bo(gem_obj); |
| |
| mode_cmd_local = *mode_cmd; |
| |
| if (bo->t_format) { |
| mode_cmd_local.modifier[0] = |
| DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED; |
| } else { |
| mode_cmd_local.modifier[0] = DRM_FORMAT_MOD_NONE; |
| } |
| |
| drm_gem_object_put_unlocked(gem_obj); |
| |
| mode_cmd = &mode_cmd_local; |
| } |
| |
| return drm_gem_fb_create(dev, file_priv, mode_cmd); |
| } |
| |
| static const struct drm_mode_config_funcs vc4_mode_funcs = { |
| .output_poll_changed = vc4_output_poll_changed, |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = vc4_atomic_commit, |
| .fb_create = vc4_fb_create, |
| }; |
| |
| int vc4_kms_load(struct drm_device *dev) |
| { |
| struct vc4_dev *vc4 = to_vc4_dev(dev); |
| int ret; |
| |
| sema_init(&vc4->async_modeset, 1); |
| |
| /* Set support for vblank irq fast disable, before drm_vblank_init() */ |
| dev->vblank_disable_immediate = true; |
| |
| ret = drm_vblank_init(dev, dev->mode_config.num_crtc); |
| if (ret < 0) { |
| dev_err(dev->dev, "failed to initialize vblank\n"); |
| return ret; |
| } |
| |
| dev->mode_config.max_width = 2048; |
| dev->mode_config.max_height = 2048; |
| dev->mode_config.funcs = &vc4_mode_funcs; |
| dev->mode_config.preferred_depth = 24; |
| dev->mode_config.async_page_flip = true; |
| |
| drm_mode_config_reset(dev); |
| |
| if (dev->mode_config.num_connector) { |
| vc4->fbdev = drm_fbdev_cma_init(dev, 32, |
| dev->mode_config.num_connector); |
| if (IS_ERR(vc4->fbdev)) |
| vc4->fbdev = NULL; |
| } |
| |
| drm_kms_helper_poll_init(dev); |
| |
| return 0; |
| } |