| /* |
| * Copyright © 2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include "i915_params.h" |
| #include "i915_drv.h" |
| |
| struct i915_params i915 __read_mostly = { |
| .modeset = -1, |
| .panel_ignore_lid = 1, |
| .semaphores = -1, |
| .lvds_channel_mode = 0, |
| .panel_use_ssc = -1, |
| .vbt_sdvo_panel_type = -1, |
| .enable_rc6 = -1, |
| .enable_dc = -1, |
| .enable_fbc = -1, |
| .enable_execlists = -1, |
| .enable_hangcheck = true, |
| .enable_ppgtt = -1, |
| .enable_psr = -1, |
| .alpha_support = IS_ENABLED(CONFIG_DRM_I915_ALPHA_SUPPORT), |
| .disable_power_well = -1, |
| .enable_ips = 1, |
| .fastboot = 0, |
| .prefault_disable = 0, |
| .load_detect_test = 0, |
| .force_reset_modeset_test = 0, |
| .reset = 2, |
| .error_capture = true, |
| .invert_brightness = 0, |
| .disable_display = 0, |
| .enable_cmd_parser = true, |
| .use_mmio_flip = 0, |
| .mmio_debug = 0, |
| .verbose_state_checks = 1, |
| .nuclear_pageflip = 0, |
| .edp_vswing = 0, |
| .enable_guc_loading = 0, |
| .enable_guc_submission = 0, |
| .guc_log_level = -1, |
| .guc_firmware_path = NULL, |
| .huc_firmware_path = NULL, |
| .enable_dp_mst = true, |
| .inject_load_failure = 0, |
| .enable_dpcd_backlight = false, |
| .enable_gvt = false, |
| }; |
| |
| module_param_named(modeset, i915.modeset, int, 0400); |
| MODULE_PARM_DESC(modeset, |
| "Use kernel modesetting [KMS] (0=disable, " |
| "1=on, -1=force vga console preference [default])"); |
| |
| module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600); |
| MODULE_PARM_DESC(panel_ignore_lid, |
| "Override lid status (0=autodetect, 1=autodetect disabled [default], " |
| "-1=force lid closed, -2=force lid open)"); |
| |
| module_param_named_unsafe(semaphores, i915.semaphores, int, 0400); |
| MODULE_PARM_DESC(semaphores, |
| "Use semaphores for inter-ring sync " |
| "(default: -1 (use per-chip defaults))"); |
| |
| module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400); |
| MODULE_PARM_DESC(enable_rc6, |
| "Enable power-saving render C-state 6. " |
| "Different stages can be selected via bitmask values " |
| "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). " |
| "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. " |
| "default: -1 (use per-chip default)"); |
| |
| module_param_named_unsafe(enable_dc, i915.enable_dc, int, 0400); |
| MODULE_PARM_DESC(enable_dc, |
| "Enable power-saving display C-states. " |
| "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)"); |
| |
| module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600); |
| MODULE_PARM_DESC(enable_fbc, |
| "Enable frame buffer compression for power savings " |
| "(default: -1 (use per-chip default))"); |
| |
| module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0400); |
| MODULE_PARM_DESC(lvds_channel_mode, |
| "Specify LVDS channel mode " |
| "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)"); |
| |
| module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600); |
| MODULE_PARM_DESC(lvds_use_ssc, |
| "Use Spread Spectrum Clock with panels [LVDS/eDP] " |
| "(default: auto from VBT)"); |
| |
| module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0400); |
| MODULE_PARM_DESC(vbt_sdvo_panel_type, |
| "Override/Ignore selection of SDVO panel mode in the VBT " |
| "(-2=ignore, -1=auto [default], index in VBT BIOS table)"); |
| |
| module_param_named_unsafe(reset, i915.reset, int, 0600); |
| MODULE_PARM_DESC(reset, "Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default])"); |
| |
| module_param_named_unsafe(vbt_firmware, i915.vbt_firmware, charp, 0400); |
| MODULE_PARM_DESC(vbt_firmware, |
| "Load VBT from specified file under /lib/firmware"); |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR) |
| module_param_named(error_capture, i915.error_capture, bool, 0600); |
| MODULE_PARM_DESC(error_capture, |
| "Record the GPU state following a hang. " |
| "This information in /sys/class/drm/card<N>/error is vital for " |
| "triaging and debugging hangs."); |
| #endif |
| |
| module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644); |
| MODULE_PARM_DESC(enable_hangcheck, |
| "Periodically check GPU activity for detecting hangs. " |
| "WARNING: Disabling this can cause system wide hangs. " |
| "(default: true)"); |
| |
| module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400); |
| MODULE_PARM_DESC(enable_ppgtt, |
| "Override PPGTT usage. " |
| "(-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with extended address space)"); |
| |
| module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400); |
| MODULE_PARM_DESC(enable_execlists, |
| "Override execlists usage. " |
| "(-1=auto [default], 0=disabled, 1=enabled)"); |
| |
| module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600); |
| MODULE_PARM_DESC(enable_psr, "Enable PSR " |
| "(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) " |
| "Default: -1 (use per-chip default)"); |
| |
| module_param_named_unsafe(alpha_support, i915.alpha_support, bool, 0400); |
| MODULE_PARM_DESC(alpha_support, |
| "Enable alpha quality driver support for latest hardware. " |
| "See also CONFIG_DRM_I915_ALPHA_SUPPORT."); |
| |
| module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0400); |
| MODULE_PARM_DESC(disable_power_well, |
| "Disable display power wells when possible " |
| "(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)"); |
| |
| module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600); |
| MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)"); |
| |
| module_param_named(fastboot, i915.fastboot, bool, 0600); |
| MODULE_PARM_DESC(fastboot, |
| "Try to skip unnecessary mode sets at boot time (default: false)"); |
| |
| module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600); |
| MODULE_PARM_DESC(prefault_disable, |
| "Disable page prefaulting for pread/pwrite/reloc (default:false). " |
| "For developers only."); |
| |
| module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600); |
| MODULE_PARM_DESC(load_detect_test, |
| "Force-enable the VGA load detect code for testing (default:false). " |
| "For developers only."); |
| |
| module_param_named_unsafe(force_reset_modeset_test, i915.force_reset_modeset_test, bool, 0600); |
| MODULE_PARM_DESC(force_reset_modeset_test, |
| "Force a modeset during gpu reset for testing (default:false). " |
| "For developers only."); |
| |
| module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600); |
| MODULE_PARM_DESC(invert_brightness, |
| "Invert backlight brightness " |
| "(-1 force normal, 0 machine defaults, 1 force inversion), please " |
| "report PCI device ID, subsystem vendor and subsystem device ID " |
| "to dri-devel@lists.freedesktop.org, if your machine needs it. " |
| "It will then be included in an upcoming module version."); |
| |
| module_param_named(disable_display, i915.disable_display, bool, 0400); |
| MODULE_PARM_DESC(disable_display, "Disable display (default: false)"); |
| |
| module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, bool, 0400); |
| MODULE_PARM_DESC(enable_cmd_parser, |
| "Enable command parsing (true=enabled [default], false=disabled)"); |
| |
| module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600); |
| MODULE_PARM_DESC(use_mmio_flip, |
| "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)"); |
| |
| module_param_named(mmio_debug, i915.mmio_debug, int, 0600); |
| MODULE_PARM_DESC(mmio_debug, |
| "Enable the MMIO debug code for the first N failures (default: off). " |
| "This may negatively affect performance."); |
| |
| module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600); |
| MODULE_PARM_DESC(verbose_state_checks, |
| "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions."); |
| |
| module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0400); |
| MODULE_PARM_DESC(nuclear_pageflip, |
| "Force enable atomic functionality on platforms that don't have full support yet."); |
| |
| /* WA to get away with the default setting in VBT for early platforms.Will be removed */ |
| module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400); |
| MODULE_PARM_DESC(edp_vswing, |
| "Ignore/Override vswing pre-emph table selection from VBT " |
| "(0=use value from vbt [default], 1=low power swing(200mV)," |
| "2=default swing(400mV))"); |
| |
| module_param_named_unsafe(enable_guc_loading, i915.enable_guc_loading, int, 0400); |
| MODULE_PARM_DESC(enable_guc_loading, |
| "Enable GuC firmware loading " |
| "(-1=auto, 0=never [default], 1=if available, 2=required)"); |
| |
| module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, int, 0400); |
| MODULE_PARM_DESC(enable_guc_submission, |
| "Enable GuC submission " |
| "(-1=auto, 0=never [default], 1=if available, 2=required)"); |
| |
| module_param_named(guc_log_level, i915.guc_log_level, int, 0400); |
| MODULE_PARM_DESC(guc_log_level, |
| "GuC firmware logging level (-1:disabled (default), 0-3:enabled)"); |
| |
| module_param_named_unsafe(guc_firmware_path, i915.guc_firmware_path, charp, 0400); |
| MODULE_PARM_DESC(guc_firmware_path, |
| "GuC firmware path to use instead of the default one"); |
| |
| module_param_named_unsafe(huc_firmware_path, i915.huc_firmware_path, charp, 0400); |
| MODULE_PARM_DESC(huc_firmware_path, |
| "HuC firmware path to use instead of the default one"); |
| |
| module_param_named_unsafe(enable_dp_mst, i915.enable_dp_mst, bool, 0600); |
| MODULE_PARM_DESC(enable_dp_mst, |
| "Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)"); |
| module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400); |
| MODULE_PARM_DESC(inject_load_failure, |
| "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)"); |
| module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600); |
| MODULE_PARM_DESC(enable_dpcd_backlight, |
| "Enable support for DPCD backlight control (default:false)"); |
| |
| module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); |
| MODULE_PARM_DESC(enable_gvt, |
| "Enable support for Intel GVT-g graphics virtualization host support(default:false)"); |
