| /* |
| * This file is part of the Chelsio T4 Ethernet driver for Linux. |
| * |
| * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #ifndef __T4_HW_H |
| #define __T4_HW_H |
| |
| #include <linux/types.h> |
| |
| enum { |
| NCHAN = 4, /* # of HW channels */ |
| MAX_MTU = 9600, /* max MAC MTU, excluding header + FCS */ |
| EEPROMSIZE = 17408, /* Serial EEPROM physical size */ |
| EEPROMVSIZE = 32768, /* Serial EEPROM virtual address space size */ |
| EEPROMPFSIZE = 1024, /* EEPROM writable area size for PFn, n>0 */ |
| RSS_NENTRIES = 2048, /* # of entries in RSS mapping table */ |
| TCB_SIZE = 128, /* TCB size */ |
| NMTUS = 16, /* size of MTU table */ |
| NCCTRL_WIN = 32, /* # of congestion control windows */ |
| PM_NSTATS = 5, /* # of PM stats */ |
| T6_PM_NSTATS = 7, /* # of PM stats in T6 */ |
| MBOX_LEN = 64, /* mailbox size in bytes */ |
| TRACE_LEN = 112, /* length of trace data and mask */ |
| FILTER_OPT_LEN = 36, /* filter tuple width for optional components */ |
| }; |
| |
| enum { |
| CIM_NUM_IBQ = 6, /* # of CIM IBQs */ |
| CIM_NUM_OBQ = 6, /* # of CIM OBQs */ |
| CIM_NUM_OBQ_T5 = 8, /* # of CIM OBQs for T5 adapter */ |
| CIMLA_SIZE = 2048, /* # of 32-bit words in CIM LA */ |
| CIM_PIFLA_SIZE = 64, /* # of 192-bit words in CIM PIF LA */ |
| CIM_MALA_SIZE = 64, /* # of 160-bit words in CIM MA LA */ |
| CIM_IBQ_SIZE = 128, /* # of 128-bit words in a CIM IBQ */ |
| CIM_OBQ_SIZE = 128, /* # of 128-bit words in a CIM OBQ */ |
| TPLA_SIZE = 128, /* # of 64-bit words in TP LA */ |
| ULPRX_LA_SIZE = 512, /* # of 256-bit words in ULP_RX LA */ |
| }; |
| |
| enum { |
| SF_PAGE_SIZE = 256, /* serial flash page size */ |
| SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ |
| }; |
| |
| enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */ |
| |
| enum { MBOX_OWNER_NONE, MBOX_OWNER_FW, MBOX_OWNER_DRV }; /* mailbox owners */ |
| |
| enum { |
| SGE_MAX_WR_LEN = 512, /* max WR size in bytes */ |
| SGE_NTIMERS = 6, /* # of interrupt holdoff timer values */ |
| SGE_NCOUNTERS = 4, /* # of interrupt packet counter values */ |
| SGE_MAX_IQ_SIZE = 65520, |
| |
| SGE_TIMER_RSTRT_CNTR = 6, /* restart RX packet threshold counter */ |
| SGE_TIMER_UPD_CIDX = 7, /* update cidx only */ |
| |
| SGE_EQ_IDXSIZE = 64, /* egress queue pidx/cidx unit size */ |
| |
| SGE_INTRDST_PCI = 0, /* interrupt destination is PCI-E */ |
| SGE_INTRDST_IQ = 1, /* destination is an ingress queue */ |
| |
| SGE_UPDATEDEL_NONE = 0, /* ingress queue pidx update delivery */ |
| SGE_UPDATEDEL_INTR = 1, /* interrupt */ |
| SGE_UPDATEDEL_STPG = 2, /* status page */ |
| SGE_UPDATEDEL_BOTH = 3, /* interrupt and status page */ |
| |
| SGE_HOSTFCMODE_NONE = 0, /* egress queue cidx updates */ |
| SGE_HOSTFCMODE_IQ = 1, /* sent to ingress queue */ |
| SGE_HOSTFCMODE_STPG = 2, /* sent to status page */ |
| SGE_HOSTFCMODE_BOTH = 3, /* ingress queue and status page */ |
| |
| SGE_FETCHBURSTMIN_16B = 0,/* egress queue descriptor fetch minimum */ |
| SGE_FETCHBURSTMIN_32B = 1, |
| SGE_FETCHBURSTMIN_64B = 2, |
| SGE_FETCHBURSTMIN_128B = 3, |
| |
| SGE_FETCHBURSTMAX_64B = 0,/* egress queue descriptor fetch maximum */ |
| SGE_FETCHBURSTMAX_128B = 1, |
| SGE_FETCHBURSTMAX_256B = 2, |
| SGE_FETCHBURSTMAX_512B = 3, |
| |
| SGE_CIDXFLUSHTHRESH_1 = 0,/* egress queue cidx flush threshold */ |
| SGE_CIDXFLUSHTHRESH_2 = 1, |
| SGE_CIDXFLUSHTHRESH_4 = 2, |
| SGE_CIDXFLUSHTHRESH_8 = 3, |
| SGE_CIDXFLUSHTHRESH_16 = 4, |
| SGE_CIDXFLUSHTHRESH_32 = 5, |
| SGE_CIDXFLUSHTHRESH_64 = 6, |
| SGE_CIDXFLUSHTHRESH_128 = 7, |
| |
| SGE_INGPADBOUNDARY_SHIFT = 5,/* ingress queue pad boundary */ |
| }; |
| |
| /* PCI-e memory window access */ |
| enum pcie_memwin { |
| MEMWIN_NIC = 0, |
| MEMWIN_RSVD1 = 1, |
| MEMWIN_RSVD2 = 2, |
| MEMWIN_RDMA = 3, |
| MEMWIN_RSVD4 = 4, |
| MEMWIN_FOISCSI = 5, |
| MEMWIN_CSIOSTOR = 6, |
| MEMWIN_RSVD7 = 7, |
| }; |
| |
| struct sge_qstat { /* data written to SGE queue status entries */ |
| __be32 qid; |
| __be16 cidx; |
| __be16 pidx; |
| }; |
| |
| /* |
| * Structure for last 128 bits of response descriptors |
| */ |
| struct rsp_ctrl { |
| __be32 hdrbuflen_pidx; |
| __be32 pldbuflen_qid; |
| union { |
| u8 type_gen; |
| __be64 last_flit; |
| }; |
| }; |
| |
| #define RSPD_NEWBUF_S 31 |
| #define RSPD_NEWBUF_V(x) ((x) << RSPD_NEWBUF_S) |
| #define RSPD_NEWBUF_F RSPD_NEWBUF_V(1U) |
| |
| #define RSPD_LEN_S 0 |
| #define RSPD_LEN_M 0x7fffffff |
| #define RSPD_LEN_G(x) (((x) >> RSPD_LEN_S) & RSPD_LEN_M) |
| |
| #define RSPD_QID_S RSPD_LEN_S |
| #define RSPD_QID_M RSPD_LEN_M |
| #define RSPD_QID_G(x) RSPD_LEN_G(x) |
| |
| #define RSPD_GEN_S 7 |
| |
| #define RSPD_TYPE_S 4 |
| #define RSPD_TYPE_M 0x3 |
| #define RSPD_TYPE_G(x) (((x) >> RSPD_TYPE_S) & RSPD_TYPE_M) |
| |
| /* Rx queue interrupt deferral fields: counter enable and timer index */ |
| #define QINTR_CNT_EN_S 0 |
| #define QINTR_CNT_EN_V(x) ((x) << QINTR_CNT_EN_S) |
| #define QINTR_CNT_EN_F QINTR_CNT_EN_V(1U) |
| |
| #define QINTR_TIMER_IDX_S 1 |
| #define QINTR_TIMER_IDX_M 0x7 |
| #define QINTR_TIMER_IDX_V(x) ((x) << QINTR_TIMER_IDX_S) |
| #define QINTR_TIMER_IDX_G(x) (((x) >> QINTR_TIMER_IDX_S) & QINTR_TIMER_IDX_M) |
| |
| /* |
| * Flash layout. |
| */ |
| #define FLASH_START(start) ((start) * SF_SEC_SIZE) |
| #define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE) |
| |
| enum { |
| /* |
| * Various Expansion-ROM boot images, etc. |
| */ |
| FLASH_EXP_ROM_START_SEC = 0, |
| FLASH_EXP_ROM_NSECS = 6, |
| FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC), |
| FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS), |
| |
| /* |
| * iSCSI Boot Firmware Table (iBFT) and other driver-related |
| * parameters ... |
| */ |
| FLASH_IBFT_START_SEC = 6, |
| FLASH_IBFT_NSECS = 1, |
| FLASH_IBFT_START = FLASH_START(FLASH_IBFT_START_SEC), |
| FLASH_IBFT_MAX_SIZE = FLASH_MAX_SIZE(FLASH_IBFT_NSECS), |
| |
| /* |
| * Boot configuration data. |
| */ |
| FLASH_BOOTCFG_START_SEC = 7, |
| FLASH_BOOTCFG_NSECS = 1, |
| FLASH_BOOTCFG_START = FLASH_START(FLASH_BOOTCFG_START_SEC), |
| FLASH_BOOTCFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_BOOTCFG_NSECS), |
| |
| /* |
| * Location of firmware image in FLASH. |
| */ |
| FLASH_FW_START_SEC = 8, |
| FLASH_FW_NSECS = 16, |
| FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC), |
| FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS), |
| |
| /* Location of bootstrap firmware image in FLASH. |
| */ |
| FLASH_FWBOOTSTRAP_START_SEC = 27, |
| FLASH_FWBOOTSTRAP_NSECS = 1, |
| FLASH_FWBOOTSTRAP_START = FLASH_START(FLASH_FWBOOTSTRAP_START_SEC), |
| FLASH_FWBOOTSTRAP_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FWBOOTSTRAP_NSECS), |
| |
| /* |
| * iSCSI persistent/crash information. |
| */ |
| FLASH_ISCSI_CRASH_START_SEC = 29, |
| FLASH_ISCSI_CRASH_NSECS = 1, |
| FLASH_ISCSI_CRASH_START = FLASH_START(FLASH_ISCSI_CRASH_START_SEC), |
| FLASH_ISCSI_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_ISCSI_CRASH_NSECS), |
| |
| /* |
| * FCoE persistent/crash information. |
| */ |
| FLASH_FCOE_CRASH_START_SEC = 30, |
| FLASH_FCOE_CRASH_NSECS = 1, |
| FLASH_FCOE_CRASH_START = FLASH_START(FLASH_FCOE_CRASH_START_SEC), |
| FLASH_FCOE_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FCOE_CRASH_NSECS), |
| |
| /* |
| * Location of Firmware Configuration File in FLASH. Since the FPGA |
| * "FLASH" is smaller we need to store the Configuration File in a |
| * different location -- which will overlap the end of the firmware |
| * image if firmware ever gets that large ... |
| */ |
| FLASH_CFG_START_SEC = 31, |
| FLASH_CFG_NSECS = 1, |
| FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC), |
| FLASH_CFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_CFG_NSECS), |
| |
| /* We don't support FLASH devices which can't support the full |
| * standard set of sections which we need for normal |
| * operations. |
| */ |
| FLASH_MIN_SIZE = FLASH_CFG_START + FLASH_CFG_MAX_SIZE, |
| |
| FLASH_FPGA_CFG_START_SEC = 15, |
| FLASH_FPGA_CFG_START = FLASH_START(FLASH_FPGA_CFG_START_SEC), |
| |
| /* |
| * Sectors 32-63 are reserved for FLASH failover. |
| */ |
| }; |
| |
| #undef FLASH_START |
| #undef FLASH_MAX_SIZE |
| |
| #define SGE_TIMESTAMP_S 0 |
| #define SGE_TIMESTAMP_M 0xfffffffffffffffULL |
| #define SGE_TIMESTAMP_V(x) ((__u64)(x) << SGE_TIMESTAMP_S) |
| #define SGE_TIMESTAMP_G(x) (((__u64)(x) >> SGE_TIMESTAMP_S) & SGE_TIMESTAMP_M) |
| |
| #endif /* __T4_HW_H */ |