| RT5640/RT5639 audio CODEC |
| |
| This device supports I2C only. |
| |
| Required properties: |
| |
| - compatible : One of "realtek,rt5640" or "realtek,rt5639". |
| |
| - reg : The I2C address of the device. |
| |
| - interrupts : The CODEC's interrupt output. |
| |
| Optional properties: |
| |
| - clocks: The phandle of the master clock to the CODEC |
| - clock-names: Should be "mclk" |
| |
| - realtek,in1-differential |
| - realtek,in2-differential |
| - realtek,in3-differential |
| Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended. |
| |
| - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. |
| |
| Pins on the device (for linking into audio routes) for RT5639/RT5640: |
| |
| * DMIC1 |
| * DMIC2 |
| * MICBIAS1 |
| * IN1P |
| * IN1N |
| * IN2P |
| * IN2N |
| * IN3P |
| * IN3N |
| * HPOL |
| * HPOR |
| * LOUTL |
| * LOUTR |
| * SPOLP |
| * SPOLN |
| * SPORP |
| * SPORN |
| |
| Additional pins on the device for RT5640: |
| |
| * MONOP |
| * MONON |
| |
| Example: |
| |
| rt5640 { |
| compatible = "realtek,rt5640"; |
| reg = <0x1c>; |
| interrupt-parent = <&gpio>; |
| interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; |
| realtek,ldo1-en-gpios = |
| <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; |
| }; |
